Osteogenic differentiation of human mesenchymal stem cells on substituted calcium phosphate/chitosan composite scaffold.

Ionic substitutions are a promising strategy to enhance the biological performance of calcium phosphates (CaP) and composite materials for bone tissue engineering applications. However, systematic studies have not been performed on multi-substituted organic/inorganic scaffolds. In this work, highly porous composite scaffolds based on CaPs substituted with Sr2+, Mg2+, Zn2+ and SeO32- ions, and chitosan have been prepared by freeze-gelation technique. The scaffolds have shown highly porous structure, with very well interconnected pores and homogeneously dispersed CaPs, and high stability during 28 days in the degradation medium. Osteogenic potential of human mesenchymal stem cells seeded on scaffolds has been determined by histological, immunohistochemical and RT-qPCR analysis of cultured cells in static and dynamic conditions. Results indicated that ionic substitutions have a beneficial effect on cells and tissues. The scaffolds with multi-substituted CaPs have shown increased expression of osteogenesis related markers and increased phosphate deposits, compared to the scaffolds with non-substituted CaPs.

Effect of electrical stimulation on chondrogenic differentiation of mesenchymal stem cells cultured in hyaluronic acid - Gelatin injectable hydrogels.

Electrical stimulation (ES) has provided enhanced chondrogenesis of mesenchymal stem cells (MSCs) cultured in micro-mass without the addition of exogenous growth factors. In this study, we demonstrate for the first time that ES of MSCs encapsulated in an injectable hyaluronic acid (HA) - gelatin (GEL) mixture enhances the chondrogenic potential of the hydrogel. Samples were stimulated for 21 days with 10 mV/cm at 60 kHz, applied for 30 min every 6 h a day. Mechanical properties of hydrogels were higher if the precursors were dissolved in Calcium-Free Krebs Ringer Buffer (G' = 1141 ± 23 Pa) compared to those diluted in culture media (G' = 213 ± 19 Pa). Cells within stimulated hydrogels were rounder (55%) than non-stimulated cultures (32%) (p = 0.005). Chondrogenic markers such as SOX-9 and aggrecan were higher in stimulated hydrogels compared to controls. The ES demonstrated that normalized content of glycosaminoglycans and collagen to DNA was slightly higher in stimulated samples. Additionally, collagen type II normalized to total collagen was 2.43 times higher in stimulated hydrogels. These findings make ES a promising tool for enhancing articular cartilage tissue engineering outcomes by combining hydrogels and MSCs.

Gelatin-Hyaluronic Acid Hydrogels with Tuned Stiffness to Counterbalance Cellular Forces and Promote Cell Differentiation.

Cells interact mechanically with their environment, exerting mechanical forces that probe the extracellular matrix (ECM). The mechanical properties of the ECM determine cell behavior and control cell differentiation both in 2D and 3D environments. Gelatin (Gel) is a soft hydrogel into which cells can be embedded. This study shows significant 3D Gel shrinking due to the high traction cellular forces exerted by the cells on the matrix, which prevents cell differentiation. To modulate this process, Gel with hyaluronic acid (HA) has been combined in an injectable crosslinked hydrogel with controlled Gel-HA ratio. HA increases matrix stiffness. The addition of small amounts of HA leads to a significant reduction in hydrogel shrinking after cell encapsulation (C2C12 myoblasts). We show that hydrogel stiffness counterbalanced traction forces of cells and this was decisive in promoting cell differentiation and myotube formation of C2C12 encapsulated in the hybrid hydrogels.

Computational analysis of cartilage implants based on an interpenetrated polymer network for tissue repairing.

Interpenetrated polymer networks (IPNs), composed by two independent polymeric networks that spatially interpenetrate, are considered as valuable systems to control permeability and mechanical properties of hydrogels for biomedical applications. Specifically, poly(ethyl acrylate) (PEA)-poly(2-hydroxyethyl acrylate) (PHEA) IPNs have been explored as good hydrogels for mimicking articular cartilage. These lattices are proposed as matrix implants in cartilage damaged areas to avoid the discontinuity in flow uptake preventing its deterioration. The permeability of these implants is a key parameter that influences their success, by affecting oxygen and nutrient transport and removing cellular waste products to healthy cartilage. Experimental try-and-error approaches are mostly used to optimize the composition of such structures. However, computational simulation may offer a more exhaustive tool to test and screen out biomaterials mimicking cartilage, avoiding expensive and time-consuming experimental tests. An accurate and efficient prediction of material's permeability and internal directionality and magnitude of the fluid flow could be highly useful when optimizing biomaterials design processes. Here we present a 3D computational model based on Sussman-Bathe hyperelastic material behaviour. A fluid structure analysis is performed with ADINA software, considering these materials as two phases composites where the solid part is saturated by the fluid. The model is able to simulate the behaviour of three non-biodegradable hydrogel compositions, where percentages of PEA and PHEA are varied. Specifically, the aim of this study is (i) to verify the validity of the Sussman-Bathe material model to simulate the response of the PEA-PHEA biomaterials; (ii) to predict the fluid flux and the permeability of the proposed IPN hydrogels and (iii) to study the material domains where the passage of nutrients and cellular waste products is reduced leading to an inadequate flux distribution in healthy cartilage tissue. The obtained results show how the model predicts the permeability of the PEA-PHEA hydrogels and simulates the internal behaviour of the samples and shows the distribution and quantification of fluid flux.

Culture of human bone marrow-derived mesenchymal stem cells on of poly(L-lactic acid) scaffolds: potential application for the tissue engineering of cartilage.

PURPOSE: Due to the attractive properties of poly(L-lactic acid) (PLLA) for tissue engineering, the aim was to determine the growth and differentiation capacity of mesenchymal stromal cells (MSCs) in PLLA scaffolds and their potential use in the treatment of cartilage diseases. METHODS: MSCs were cultured in PLLA films and thin porous membranes to study adherence and proliferation. Permeability and porosity were determined for the different scaffolds employed. The optimal conditions for cell seeding were first determined, as well as cell density and distribution inside the PLLA. Scaffolds were then maintained in expansion or chondrogenic differentiation media for 21 days. Apoptosis, proliferation and chondrogenic differentiation was assessed after 21 days in culture by immunohistochemistry. Mechanical characteristics of scaffolds were determined before and after cell seeding. RESULTS: MSCs uniformly adhered to PLLA films as well as to porous membranes. Proliferation was detected only in monolayers of pure PLLA, but was no longer detected after 10 days. Mechanical characterization of PLLA scaffolds showed differences in the apparent compression elastic modulus for the two sizes used. After determining high efficiencies of seeding, the production of extracellular matrix (ECM) was determined and contained aggrecan and collagens type I and X. ECM produced by the cells induced a twofold increase in the apparent elastic modulus of the composite. CONCLUSIONS: Biocompatible PLLA scaffolds have been developed that can be efficiently loaded with MSCs. The scaffold supports chondrogenic differentiation and ECM deposition that improves the mechanics of the scaffold. Although this improvement does not met the expectations of a hyaline-like cartilage ECM, in part due to the lack of a mechanical stimulation, their potential use in the treatment of cartilage pathologies encourages to improve the mechanical component.

Mimicking natural dentin using bioactive nanohybrid scaffolds for dentinal tissue engineering.

Synthetic materials mimicking the internal porous structure of natural dentin were prepared as nanohybrid matrix scaffolds made of poly(ethyl methacrylate-co-hydroxyethyl acrylate), pure and with a sol-gel-derived interpenetrated silica nanophase, with aligned tubular pores in the micrometer range typical of dentinal tissue. Some of them were internally coated with a layer of hydroxyapatite by immersion in simulated body fluid. Their physicochemical and mechanical properties were investigated. The different types of scaffolds were implanted subcutaneously into immunocompromised nude mice for 4, 6, and 8 weeks and their biological response were analyzed. Optical microscopy was employed to study the scaffold structure and neovascularization. Cells origin, inflammation, and macrophagic responses were evaluated by optical microscopy, immunohistochemistry, and transmission electron microscopy. The scaffold ultrastructural pattern imitates dentinal histological structure. The materials allowed cell colonization and neoangiogenesis. These biomaterials were colonized by murine cells fenotypically different to those of dermal connective tissue, showing structural differentiations. Colonization and viability were improved by the use of mineralized interphases, which showed a cellular distribution resembling a neodentinal pattern. Invasion of the scaffold tubules by single odontoblast-like processes was ascertained both in the noncoated and coated scaffolds. Such materials thus seem promising in tissue engineering strategies for dentin regeneration.