Site-specific cancer risk following cobalt exposure via orthopedic implants or in occupational settings: A systematic review and meta-analysis.

In 2020, the European Commission up-classified metal cobalt as Class 1B Carcinogen (presumed to have carcinogenic potential) based primarily on data from rodent inhalation carcinogenicity studies. This up-classification requires an assessment under the Medical Device Regulations of cobalt cancer risk from medical devices. We performed a systematic review and meta-analysis to evaluate site-specific cancer risks with cobalt exposure from either total joint replacement (TJR) or occupational exposure (OC). Results were stratified by exposure type (OC or TJR), exposure level (metal-on-metal (MoM) or non-MoM), follow-up duration (latency period: <5, 5-10 or >10 years), and cancer incidence or mortality (detection bias assessment). From 30 studies (653,104 subjects, average 14.5 years follow-up), the association between TJR/OC and cancer risk was null for 22 of 27 cancer sites, negative for 3 sites, and positive for prostate cancer and myeloma. Significant heterogeneity and large estimate ranges were observed for many cancer sites. No significant increase in estimates was observed by exposure level or follow-up duration. The current evidence, including weak associations, heterogeneity across studies and no increased association with exposure level or follow-up duration, is insufficient to conclude that there exists an increased risk for people exposed to cobalt in TJR/OC of developing site-specific cancers.

Carcinogenic assessment of cobalt-containing alloys in medical devices or cobalt in occupational settings: A systematic review and meta-analysis of overall cancer risk from published epidemiologic studies.

In 2020, the European Commission up-classified pure cobalt metal to a Category 1B hazard, based primarily on data from rodent inhalation carcinogenicity studies of metallic cobalt. The European Commission review did not evaluate cobalt-containing alloys in medical devices, which have very different properties vs. pure cobalt metal and did not include a systematic epidemiologic review. We performed a systematic review and meta-analysis of published, peer-reviewed epidemiologic studies evaluating the association between overall cancer risk and exposure to orthopedic implants containing cobalt alloys or cobalt particulates in occupational settings. Study-specific estimates were pooled using random-effects models. Analyses included 20 papers on orthopedic implants and 10 occupational cohort papers (~1 million individuals). The meta-analysis summary estimates (95% confidence intervals) for overall cancer risk were 1.00 (0.96-1.04) overall and 0.97 (0.94-1.00) among high-quality studies. Results were also similar in analyses stratified by type of exposure/data sources (occupational cohort, implant registry or database), comparators (general or implant population), cancer incidence or mortality, follow-up duration (latency period), and study precision. In conclusion, meta-analysis found no association between exposure to orthopedic implants containing cobalt alloys or cobalt particulates in occupational settings and overall cancer risk, including an analysis of studies directly comparing metal-on-metal vs. non-metal-on-metal implants.

An integrated benefit-risk assessment of cobalt-containing alloys used in medical devices: Implications for regulatory requirements in the European Union.

In 2017, the European Union (EU) Committee for Risk Assessment (RAC) recommended the classification of metallic cobalt (Co) as Category 1B with respect to its carcinogenic and reproductive hazard potential and Category 2 for mutagenicity but did not evaluate the relevance of these classifications for patients exposed to Co-containing alloys (CoCA) used in medical devices. CoCA are inherently different materials from Co metal from a toxicological perspective and thus require a separate assessment. CoCA are biocompatible materials with a unique combination of properties including strength, durability, and a long history of safe use that make them uniquely suited for use in a wide-range of medical devices. Assessments were performed on relevant preclinical and clinical carcinogenicity and reproductive toxicity data for Co and CoCA to meet the requirements under the EU Medical Device Regulation triggered by the ECHA re-classification (adopted in October 2019 under the 14th Adaptation to Technical Progress to CLP) and to address their relevance to patient safety. The objective of this review is to present an integrated overview of these assessments, a benefit-risk assessment and an examination of potential alternative materials. The data support the conclusion that the exposure to CoCA in medical devices via clinically relevant routes does not represent a hazard for carcinogenicity or reproductive toxicity. Additionally, the risk for the adverse effects that are known to occur with elevated Co concentrations (e.g., cardiomyopathy) are very low for CoCA implant devices (infrequent reports often reflecting a unique catastrophic failure event out of millions of patients) and negligible for CoCA non-implant devices (not measurable/no case reports). In conclusion, the favorable benefit-risk profile also in relation to possible alternatives presented herein strongly support continued use of CoCA in medical devices.

Discrepancy of Trial Rasp and Femoral Stem Relative Position Within the Femoral Canal of a Coated Tapered System: An Intraoperative, Intrapatient Controlled Study.

BACKGROUND: For a successful total hip arthroplasty, the final position of the trial rasp should be adopted by the femoral stem to achieve correct positioning. This study aimed to characterize the discrepancy of the stem and rasp position in vivo of a widely used dual-tapered straight stem with rectangular cross section that is known to have an oversized stem with respect to the rasp. METHODS: The distances between the tip of the greater trochanter and the shoulder of the implant and rasp were measured on 39 intraoperatively acquired fluoroscopic image pairs. Leg-length discrepancy was also measured clinically before and after surgery. RESULTS: A paired t-test showed a significant average protrusion of the femoral stem with respect to the final rasp position of 2.63 mm (standard deviation = 2.3 mm, P < .001), while 88% of the cases had no leg-length discrepancy after surgery. The quantified stem protrusion was statistically significant but did not reach clinical relevance and was easily mitigated in our study. CONCLUSIONS: The quantified stem protrusion appears to be clinically manageable, as only 2 cases required attenuation of stem positioning: in one case by the use of a femoral head with a shorter neck and in the other case by rerasping the femoral bed. Neither case was associated with the most extreme differences in position of the stem with respect to the final rasp. In addition, the used stem shows good overall outcomes in other studies. It appears that factors other than stem and rasp position play a critical role to the surgeon and for total hip arthroplasty success.

Biomechanical comparison of two biplanar and one monoplanar reconstruction techniques of the acromioclavicular joint.

INTRODUCTION: The purpose of this proof-of-concept study was to investigate the biomechanical performance of two surgical techniques, namely (1) the double Tight-Rope fixation with an additional acromioclavicular FiberTape fixation (DTRC) and (2) the fixation of the clavicle to the acromion and coracoid in a bipodal manner (Bipod) using a Poly-Tape and FiberTape. Both techniques intend to address vertical and horizontal instability after acromioclavicular dislocation. They were compared with the commonly used (3) double Tight-Rope (DTR) technique, which only stabilizes the clavicle to the coracoid. MATERIALS AND METHODS: The acromioclavicular joint (ACJ) of 18 composite Sawbone shoulder specimens (6 per reconstruction group) were tested for posterosuperior elongation (70N cyclical load, 1500 cycles), load-to-failure and stiffness. RESULTS: After 1500 cycles, the DTRC, Bipod and DTR group showed an elongation of 0.45 mm (SD 0.14 mm), 1.19 mm (SD 0.54 mm), and 0.46 mm (SD 0.15 mm), respectively. Although the elongation of the Bipod group was increased when compared to the other two groups (Bipod versus DTRC p = 0.008; Bipod versus DTR p = 0.006), the difference was less than 0.7 mm. The DTRC showed a higher load-to-failure of 656.1N (SD 58.1 N) compared to the Bipod [531.1 N (SD 108.2N) (p = 0.039)] and DTR group [522.8 N (SD 32.8 N) (p = 0.033)]. CONCLUSION: The DTRC and the DTR group resulted in similar low elongation, while the elongation in the Bipod technique was slightly higher. Even though this difference of 0.7 mm shows statistical significance, it most likely has no clinical relevance. When testing in posterosuperior direction, which is the clinically relevant load vector, an additional fixation of the clavicle to the acromion did not reduce elongation in this study. It is, furthermore, questionable if the benefit of an increased load-to-failure in combination with no improvement in elongation and stiffness as seen in the DTRC group outweighs the possible risks and increased costs coming with the DTRC refixation.

Rabbit Achilles tendon full transection model - wound healing, adhesion formation and biomechanics at 3, 6 and 12†weeks post-surgery.

After tendon rupture repair, two main problems may occur: re-rupture and adhesion formation. Suitable non-murine animal models are needed to study the healing tendon in terms of biomechanical properties and extent of adhesion formation. In this study 24 New Zealand White rabbits received a full transection of the Achilles tendon 2 cm above the calcaneus, sutured with a 4-strand Becker suture. Post-surgical analysis was performed at 3, 6 and 12 weeks. In the 6-week group, animals received a cast either in a 180 deg stretched position during 6 weeks (adhesion provoking immobilization), or were re-casted with a 150 deg position after 3 weeks (adhesion inhibiting immobilization), while in the other groups (3 and 12 weeks) a 180 deg position cast was applied for 3 weeks. Adhesion extent was analyzed by histology and ultrasound. Histopathological scoring was performed according to a method by Stoll et al. (2011), and the main biomechanical properties were assessed. Histopathological scores increased as a function of time, but did not reach values of healthy tendons after 12 weeks (only around 15 out of 20 points). Adhesion provoking immobilization led to an adhesion extent of 82.7±9.7%, while adhesion inhibiting immobilization led to 31.9±9.8% after 6 weeks. Biomechanical properties increased over time, however, they did not reach full strength nor elastic modulus at 12 weeks post-operation. Furthermore, the rabbit Achilles tendon model can be modulated in terms of adhesion formation to the surrounding tissue. It clearly shows the different healing stages in terms of histopathology and offers a suitable model regarding biomechanics because it exhibits similar biomechanics as the human flexor tendons of the hand.

Tendon Collagen Crosslinking Offers Potential to Improve Suture Pullout in Rotator Cuff Repair: An Ex Vivo Sheep Study.

BACKGROUND: The suture-tendon interface is often the weakest link in tendon to bone repair of massive rotator cuff tears. Genipin is a low-toxicity collagen crosslinker derived from the gardenia fruit that has been shown to augment collagen tissue strength and mechanically arrest tendon-tear progression. QUESTION/PURPOSE: The purpose of the current study was to evaluate whether genipin crosslinking can sufficiently augment the suture-tendon interface to improve suture pullout strength using simple single-loop sutures and the modified Mason-Allen technique. The study also aimed to assess whether time of genipin treatment is a relevant factor in efficacy. METHODS: In an ex vivo (cadaveric) sheep rotator cuff tendon model, a total of 142 suture pullout tests were performed on 32 infraspinatus tendons. Each tendon was prepared with three single-loop stitches. Two groups were pretreated by incubation in genipin solution for either 4 hours or 24 hours. Two corresponding control groups were incubated in phosphate buffered saline for the same periods. The same test protocol was applied to tendons using modified Mason-Allen technique stitch patterns. Each suture was loaded to failure on a universal materials testing machine. Suture pullout force, stiffness, and work to failure were calculated from force-displacement data, and then compared among the groups. RESULTS: Median single-loop pullout force on tendons incubated for 24 hours in genipin yielded an approximately 30% increase in maximum pullout force for single-loop stitches with a median of 73 N (range, 56-114 N) compared with 56 N (range, 40-69 N; difference of medians = 17 N; p = 0.028), with corresponding increases in the required work to failure but not stiffness. Genipin treatment for 4 hours showed no added benefit for suture-pullout behavior (46 N, [range, 35-95 N] versus 45 N, [range, 28-63 N]; difference of medians, 1 N; p = 1). No tested genipin crosslinking conditions indicated benefit for tendons grasped using the modified Mason-Allen technique after 4 hours (162 N, [range, 143-193 N] versus 140 N, [range, 129-151 N]; difference of medians, 22 N; p = 0.114) or after 24 hours of crosslinking (172 N, [range, 42-183 N] versus 164 N [range, 151-180 N]; difference of medians, 8 N; p = 0.886). CONCLUSION: Exogenous collagen crosslinking in genipin can markedly improve resistance to pullout at the tendon-suture interface for simple stitch patterns while the modified Mason-Allen stitch showed no benefit in an ex vivo animal model. CLINICAL RELEVANCE: Tendon strength augmentation by genipin pretreatment offers the potential to improve suture retention properties. Future studies are warranted for the development of clinically viable intraoperative delivery strategies and in vivo testing for safety and efficacy.

Tissue composition regulates distinct viscoelastic responses in auricular and articular cartilage.

It is well-accepted that articular (ART) cartilage composition and tissue architecture are intimately related to mechanical properties. On the other hand, very little information about other cartilage tissues is available, such as elastin-rich auricular (AUR) cartilage. While thorough investigation of ART cartilage has enhanced osteoarthritis research, ear cartilage reconstruction and tissue engineering (TE) could benefit in a similar way from in-depth analysis of AUR cartilage properties. This study aims to explore the constituent-function relationships of AUR cartilage, and how elastin influences mechanical behavior. Stress-relaxation indentation and tensile tests were performed on bovine ART and AUR cartilage. Elastase incubation was performed to simultaneously deplete elastin and sulfated glycosaminoglycans (sGAG), while hyaluronidase incubation was used to deplete sGAG-only, in order to systematically investigate matrix components in material behavior. ART and AUR cartilages showed different viscoelastic behaviors, with AUR cartilage exhibiting a more elastic behavior. Higher equilibrium properties and limited viscous dissipation of strain energy were observed in AUR cartilage, while ART cartilage exhibited a rapid viscous response and high resistance to instantaneous loading. In conclusion, loss of sGAG had no effect on auricular mechanics in contrast to articular cartilage where GAG loss clearly correlated with mechanical properties. Auricular cartilage without elastin lost all compressive mechanical integrity, whereas in articular cartilage this was provided by collagen. This work shows for the first time the involvement of elastin in the mechanical behavior of ear cartilage. In future, this data can be used in AUR cartilage TE efforts to support reproduction of tissue-specific mechanical properties.

Advanced glycation end-products reduce collagen molecular sliding to affect collagen fibril damage mechanisms but not stiffness.

Advanced glycation end-products (AGE) contribute to age-related connective tissue damage and functional deficit. The documented association between AGE formation on collagens and the correlated progressive stiffening of tissues has widely been presumed causative, despite the lack of mechanistic understanding. The present study investigates precisely how AGEs affect mechanical function of the collagen fibril--the supramolecular functional load-bearing unit within most tissues. We employed synchrotron small-angle X-ray scattering (SAXS) and carefully controlled mechanical testing after introducing AGEs in explants of rat-tail tendon using the metabolite methylglyoxal (MGO). Mass spectrometry and collagen fluorescence verified substantial formation of AGEs by the treatment. Associated mechanical changes of the tissue (increased stiffness and failure strength, decreased stress relaxation) were consistent with reports from the literature. SAXS analysis revealed clear changes in molecular deformation within MGO treated fibrils. Underlying the associated increase in tissue strength, we infer from the data that MGO modified collagen fibrils supported higher loads to failure by maintaining an intact quarter-staggered conformation to nearly twice the level of fibril strain in controls. This apparent increase in fibril failure resistance was characterized by reduced side-by-side sliding of collagen molecules within fibrils, reflecting lateral molecular interconnectivity by AGEs. Surprisingly, no change in maximum fibril modulus (2.5 GPa) accompanied the changes in fibril failure behavior, strongly contradicting the widespread assumption that tissue stiffening in ageing and diabetes is directly related to AGE increased fibril stiffness. We conclude that AGEs can alter physiologically relevant failure behavior of collagen fibrils, but that tissue level changes in stiffness likely occur at higher levels of tissue architecture.

Prevention of peritendinous adhesions using an electrospun DegraPol polymer tube: a histological, ultrasonographic, and biomechanical study in rabbits.

PURPOSE: One of the great challenges in surgical tendon rupture repair is to minimize peritendinous adhesions. In order to reduce adhesion formation, a physical barrier was applied to a sutured rabbit Achilles tendon, with two different immobilization protocols used postoperatively. METHODS: Thirty New Zealand white rabbits received a laceration on the Achilles tendon, sutured with a 4-strand Becker suture, and half of the rabbits got a DegraPol tube at the repair site. While fifteen rabbits had their treated hind leg in a 180° stretched position during 6 weeks (adhesion provoking immobilization), the other fifteen rabbits were recasted with a 150° position after 3 weeks (adhesion inhibiting immobilization). Adhesion extent was analysed macroscopically, via ultrasound and histology. Inflammation was determined histologically. Biomechanical properties were analysed. RESULTS: Application of a DegraPol tube reduced adhesion formation by approximately 20%--independently of the immobilization protocol. Biomechanical properties of extracted specimen were not affected by the tube application. There was no serious inflammatory reaction towards the implant material. CONCLUSIONS: Implantation of a DegraPol tube tightly set around a sutured tendon acts as a beneficial physical barrier and prevents adhesion formation significantly--without affecting the tendon healing process.

Dose- and time-dependent effects of genipin crosslinking on cell viability and tissue mechanics - toward clinical application for tendon repair.

The crosslinking agent genipin is increasingly invoked for the mechanical augmentation of collagen tissues and implants, and has previously been demonstrated to arrest mechanical damage accumulation in various tissues. This study established an in vitro dose-response baseline for the effects of genipin treatment on tendon cells and their matrix, with a view to in vivo application to the repair of partial tendon tears. Regression models based on a broad range of experimental data were used to delineate the range of concentrations that are likely to achieve functionally effective crosslinking, and predict the corresponding degree of cell loss and diminished metabolic activity that can be expected. On these data, it was concluded that rapid mechanical augmentation of tissue properties can only be achieved by accepting some degree of cytotoxicity, yet that post-treatment cell survival may be adequate to eventually repopulate and stabilize the tissue. On this basis, development of delivery strategies and subsequent in vivo study seems warranted.

Advanced glycation end-products diminish tendon collagen fiber sliding.

Connective tissue aging and diabetes related comorbidity are associated with compromised tissue function, increased susceptibility to injury, and reduced healing capacity. This has been partly attributed to collagen cross-linking by advanced glycation end-products (AGEs) that accumulate with both age and disease. While such cross-links are believed to alter the physical properties of collagen structures and tissue behavior, existing data relating AGEs to tendon mechanics is contradictory. In this study, we utilized a rat tail tendon model to quantify the micro-mechanical repercussion of AGEs at the collagen fiber-level. Individual tendon fascicles were incubated with methylglyoxal (MGO), a naturally occurring metabolite known to form AGEs. After incubation in MGO solution or buffer only, tendons were stretched on the stage of a multiphoton confocal microscope and individual collagen fiber stretch and relative fiber sliding were quantified. Treatment by MGO yielded increased fluorescence and elevated denaturation temperatures as found in normally aged tissue, confirming formation of AGEs and related cross-links. No apparent ultrastructural changes were noted in transmission electron micrographs of cross-linked fibrils. MGO treatment strongly reduced tissue stress relaxation (p<0.01), with concomitantly increased tissue yield stress (p<0.01) and ultimate failure stress (p=0.036). MGO did not affect tangential modulus in the linear part of the stress-strain curve (p=0.46). Microscopic analysis of collagen fiber kinematics yielded striking results, with MGO treatment drastically reducing fiber-sliding (p<0.01) with a compensatory increase in fiber-stretch (p<0.01). We thus conclude that the main mechanical effect of AGEs is a loss of tissue viscoelasticity driven by matrix-level loss of fiber-fiber sliding. This has potentially important implications to tissue damage accumulation, mechanically regulated cell signaling, and matrix remodeling. It further highlights the importance of assessing viscoelasticity - not only elastic response - when considering age-related changes in the tendon matrix and connective tissue in general.

Potential of collagen cross-linking therapies to mediate tendon mechanical properties.

Collagen cross-links are fundamental to the mechanical integrity of tendon, with orderly and progressive enzymatic cross-linking being central to healthy development and injury repair. However, the nonenzymatic cross-links that form as we age are associated with increased tendon brittleness, diminished mechanical resistance to injury, and impaired matrix remodeling. Collagen cross-linking thus sits at the center of tendon structure and function, with important implications to age, disease, injury, and therapy. The current review touches on these aspects from the perspective of their potential relevance to the shoulder surgeon. We first introduce the most well-characterized endogenous collagen cross-linkers that enable fibrillogenesis in development and healing. We also discuss the glycation-mediated cross-links that are implicated in age- and diabetes-related tendon frailty and summarize work toward therapies against these disadvantageous cross-links. Conversely, we discuss the introduction of exogenous collagen cross-links to augment the mechanical properties of collagen-based implants or native tendon tissue. We conclude with a summary of our early results using exogenous collagen cross-linkers to prevent tendon tear enlargement and eventual failure in an in vitro model of partial tendon tear.

Exogenous collagen cross-linking recovers tendon functional integrity in an experimental model of partial tear.

We investigated the hypothesis that exogenous collagen cross-linking can augment intact regions of tendon to mitigate mechanical propagation of partial tears. We first screened the low toxicity collagen cross-linkers genipin, methylglyoxal and ultra-violet (UV) light for their ability to augment tendon stiffness and failure load in rat tail tendon fascicles (RTTF). We then investigated cross-linking effects in load bearing equine superficial digital flexor tendons (SDFT). Data indicated that all three cross-linking agents augmented RTTF mechanical properties but reduced native viscoelasticity. In contrast to effects observed in fascicles, methylglyoxal treatment of SDFT detrimentally affected tendon mechanical integrity, and in the case of UV did not alter tendon mechanics. As in the RTTF experiments, genipin cross-linking of SDFT resulted in increased stiffness, higher failure loads and reduced viscoelasticity. Based on this result we assessed the efficacy of genipin in arresting tendon tear propagation in cyclic loading to failure. Genipin cross-linking secondary to a mid-substance biopsy-punch significantly reduced tissue strains, increased elastic modulus and increased resistance to fatigue failure. We conclude that genipin cross-linking of injured tendons holds potential for arresting tendon tear progression, and that implications of the treatment on matrix remodeling in living tendons should now be investigated.

Suitability of Thiel embalmed tendons for biomechanical investigation.

The standard post-mortem storage method for biomechanical testing is freezing. Freezing minimally alters the biomechanical characteristics of tendons but only suspends the process of decay. Chemical fixation arrests decay and overcomes risk of infection, but alters the biomechanical properties of tendons. On the other hand, Thiel preservation has been reported to maintain soft tissue consistency similar to that of living tissue. The current study investigates the effects of Thiel embalming on human digitorum profundus tendons (FDP) from fresh-frozen and Thiel embalmed cadavers. Cross-sectional area was measured at pre-load, samples were preconditioned and then ramped at a constant strain-rate to failure. Thiel preserved tendons had statistically lower failure stress with median of 38MPa compared to fresh frozen samples with median of 60MPa (p-value=0.048) and trended to a decreased tangential modulus. To overcome limited donor number and masking factors of age, gender, and time embalmed, we also performed experiments in rat tail tendon fascicle. Similar quasi-static ramp to failure tests were performed with control and Thiel treated sample pairs. Similar differences were observed to those found as in human FDP, however these trends were statistically significant. In both tendons, Thiel preserved samples demonstrated altered failure characteristics, indicating a different collagen fiber/collagen network failure mechanism most likely due to partial denaturing by boric acid in Thiel solution. In conclusion, Thiel embalmed tendons did not faithfully represent the biomechanical characteristics of fresh frozen tendons.

Small hook thread (Quill) and soft felt internal splint to increase the primary repair strength of lacerated rabbit Achilles tendons: biomechanical analysis and considerations for hand surgery.

BACKGROUND: For the prevention of re-rupture during early healing phase, the primary repair strength of repaired lacerated tendons in hand surgery should be maximal and the reconstructed diameter minimal. Two new repair methods (small hook thread and internal splint) were assessed for strength and reconstructed diameter characteristics. METHODS: Achilles tendons of 43 female New Zealand White rabbits were sectioned 2 cm above the calcaneus. Specimens were divided into 7 groups and repaired as follows: Kirchmayr method 2-strand with 4.0 polypropylene thread; Becker method 4-strand; 6-strand; internal splint; Kirchmayr method small hook 2-strand; Becker method small hook 4-strand, non-modified tendon. Load until failure, load until gap formation, gap length, cross-sectional area and failure stress were determined. FINDINGS: The small hook 2-strand suture had 1.3 fold higher loads until failure compared to a conventional 2-strand suture, P<0.05. The internal splint had a similar load until failure (22 N (SD 6)) as the conventional 2-strand suture (23 N (SD 4)); around half the load until failure of the conventional 4-strand suture (38 N (SD 9)). Load until gap formation correlated positively with load until failure (y=0.65+3.6; r(2)=0.72). The running suture increased the cross-sectional area at the repair site by a factor of 1.3. INTERPRETATION: Using a small hook thread instead of a 4.0 polypropylene thread significantly increases the primary repair strength with the same number of strands. Internal splints may be an alternative to conventional 2-strand sutures for bridging large gaps.

Equivalent stiffness after glycosaminoglycan depletion in tendon--an ultra-structural finite element model and corresponding experiments.

The glycosaminoglycan (GAG) side-chains of small leucine-rich proteoglycans have been postulated to mechanically cross-link adjacent collagen fibrils and contribute to tendon mechanics. Enzymatic depletion of tendon GAGs (chondroitin and dermatan sulfate) has emerged as a preferred method to experimentally assess this role. However, GAG removal is typically incomplete and the possibility remains that extant GAGs may remain mechanically functional. The current study specifically investigated the potential mechanical effect of the remaining GAGs after partial enzymatic digestion. A three-dimensional finite element model of tendon was created based upon the concept of proteoglycan mediated inter-fibril load sharing. Approximately 250 interacting, discontinuous collagen fibrils were modeled as having a length of 400 µm, being composed of rod elements of length 67 nm and E-modulus 1 GPa connected in series. Spatial distribution and diameters of these idealized fibrils were derived from a representative cross-sectional electron micrograph of tendon. Rod element lengths corresponded to the collagen fibril D-Period, widely accepted to act as a binding site for decorin and biglycan, the most abundant proteoglycans in tendon. Each element node was connected to nodes of any neighboring fibrils within a radius of 100 nm, the slack length of unstretched chondroitin sulfate. These GAG cross-links were the sole mechanism for lateral load sharing among the discontinuous fibrils, and were modeled as bilinear spring elements. Simulation of tensile testing of tendon with complete cross-linking closely reproduced corresponding experiments on rat tail tendons. Random reduction of 80% of GAG cross-links (matched to a conservative estimate of enzymatic depletion efficacy) predicted a drop of 14% in tendon modulus. Corresponding mechanical properties derived from experiments on rat tail tendons treated in buffer with and without chondroitinase ABC were apparently unaffected, regardless of GAG depletion. Further tests for equivalence, conservatively based on effect size limits predicted by the model, confirmed equivalent stiffness between enzymatically depleted tendons and their native controls. Although the model predicts that relatively small quantities of GAGs acting as primary collagen cross-linking elements could provide mechanical integrity to the tendon, partial enzymatic depletion of GAGs should result in mechanical changes that are not reflected in analogous experimental testing. We thus conclude that GAG side chains of small leucine-rich proteoglycans are not a primary determinant of tensile mechanical behavior in mature rat tail tendons.

Evidence against proteoglycan mediated collagen fibril load transmission and dynamic viscoelasticity in tendon.

The glycosaminoglycan (GAG) dermatan sulfate and chondroitin sulfate side-chains of small leucine-rich proteoglycans have been increasingly posited to act as molecular cross links between adjacent collagen fibrils and to directly contribute to tendon elasticity. GAGs have also been implicated in tendon viscoelasticity, supposedly affecting frictional loss during elongation or fluid flow through the extra cellular matrix. The current study sought to systematically test these theories of tendon structure-function by investigating the mechanical repercussions of enzymatic depletion of GAG complexes by chondroitinase ABC in a reproducible tendon structure-function model (rat tail tendon fascicles). The extent of GAG removal (at least 93%) was verified by relevant spectrophotometric assays and transmission electron microscopy. Dynamic viscoelastic tensile tests on GAG depleted rat tail tendon fascicle were not mechanically different from controls in storage modulus (elastic behavior) over a wide range of strain-rates (0.05, 0.5, and 5% change in length per second) in either the linear or nonlinear regions of the material curve. Loss modulus (viscoelastic behavior) was only affected in the nonlinear region at the highest strain-rate, and even this effect was marginal (19% increased loss modulus, p=0.035). Thus glycosaminoglycan chains of small leucine-rich proteoglycans do not appear to mediate dynamic elastic behavior nor do they appear to regulate the dynamic viscoelastic properties in rat tail tendon fascicles.