Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
Add more filters










Database
Language
Publication year range
1.
Chem Commun (Camb) ; 51(95): 16920-3, 2015 Dec 11.
Article in English | MEDLINE | ID: mdl-26440601

ABSTRACT

A high silica CHA zeolite is successfully synthesized in the presence of a small amount of N,N,N-dimethylethylcyclohexylammonium bromide under solvent-free conditions. Catalytic tests for the selective catalytic reduction of NOx with NH3 (NH3-SCR) and methanol-to-olefins (MTO) show that the sample from the solvent-free route exhibits comparable catalytic properties to that from the conventional route.

2.
Chemphyschem ; 15(8): 1700-7, 2014 Jun 06.
Article in English | MEDLINE | ID: mdl-24644296

ABSTRACT

COE-4 zeolites possess a unique two-dimensional ten-ring pore structure with the Si(OH)2 hydroxyl groups attached to the linker position between the ferrierite-type layers, which has been demonstrated through the interlayer-expansion approach in our previous work (H. Gies et al. Chem. Mater. 2012, 24, 1536). Herein, density functional theory is used to study the framework stability and Brønsted acidity of the zeolite T-COE-4, in which the tetravalent Si is isomorphously substituted by a trivalent Fe, B, Ga, or Al heteroatom at the linker position. The influences of substitution energy and equilibrium geometry parameters on the stability of T-COE-4 are investigated in detail. The relative acid strength of the linker position is revealed by the proton affinity, charge analysis, and NH3 adsorption. It is found that the range of the ⟨T-O-Si⟩ angles is widened to maintain the stability of isomorphously substituted T-COE-4 zeolites. The smaller the ⟨O1-T-O2⟩ bond angle is, the more difficult is to form the regular tetrahedral unit. Thus, the substitution energies at the linker positions increase in the following sequence: Al-COE-4 < Ga-COE-4 < Fe-COE-4 < B-COE-4. The adsorption of NH3 as a probe molecule indicates that the acidity can affect the hydrogen-bonding interaction between (N-H⋅⋅⋅O2) and (N⋅⋅⋅H-O2). The relative Brønsted-acid strength of the interlayer-expanded T-COE-4 zeolite decreases in the order of Al-COE-4 > Ga-COE-4 > Fe-COE-4 > B-COE-4. These findings may be helpful for the structural design and functional modification of interlayer-expanded zeolites.

3.
Chem Commun (Camb) ; 48(94): 11549-51, 2012 Dec 07.
Article in English | MEDLINE | ID: mdl-23093006

ABSTRACT

A ferrierite-type layered aluminosilicate, Al-RUB-36, was prepared for the first time and its interlayer expansion resulted in new zeolite catalysts denoted Al-COE-3 and Al-COE-4. Decane hydroconversion tests demonstrated the highly active and shape-selective nature of the new Al-COE-4 catalyst with an unprecedented isomerization yield, highlighting the potential of this material as a hydroisomerization catalyst. This is the first report on achieving shape-selectivity via interlayer expansion.

4.
Chemistry ; 17(2): 598-605, 2011 Jan 10.
Article in English | MEDLINE | ID: mdl-21207578

ABSTRACT

High-temperature, stable core-shell catalysts for ammonia decomposition have been synthesized. The highly active catalysts, which were found to be also excellent model systems for fundamental studies, are based on α-Fe(2)O(3) nanoparticles coated by porous silica shells. In a bottom-up approach, hematite nanoparticles were firstly obtained from the hydrothermal reaction of ferric chlorides, L-lysine, and water with adjustable average sizes of 35, 47, and 75 nm. Secondly, particles of each size could be coated by a porous silica shell by means of the base-catalyzed hydrolysis of tetraethylorthosilicate (TEOS) with cetyltetramethylammonium bromide (CTABr) as porogen. After calcination, TEM, high-resolution scanning electron microscopy (HR-SEM), energy-dispersive X-ray (EDX), XRD, and nitrogen sorption studies confirmed the successful encapsulation of hematite nanoparticles inside porous silica shells with a thickness of 20 nm, thereby leading to composites with surface areas of approximately 380 m(2) g(-1) and iron contents between 10.5 and 12.2 wt %. The obtained catalysts were tested in ammonia decomposition. The influence of temperature, iron oxide core size, possible diffusion limitations, and dilution effects of the reagent gas stream with noble gases were studied. The catalysts are highly stable at 750 °C with a space velocity of 120,000 cm(3) g(cat)(-1) h(-1) and maintained conversions of around 80 % for the testing period time of 33 h. On the basis of the excellent stability under reaction conditions up to 800 °C, the system was investigated by in situ XRD, in which body-centered iron was determined, in addition to FeN(x), as the crystalline phase under reaction conditions above 650 °C.

5.
J Am Chem Soc ; 132(19): 6791-9, 2010 May 19.
Article in English | MEDLINE | ID: mdl-20420374

ABSTRACT

In this study, a facile and controllable synthetic route for the fabrication of mushroom nanostructures (Fe(x)O(y)@PSD-SiO(2)) and their hollow derivatives has been established. The synthesis consists of partial coating of Fe(x)O(y) (Fe(3)O(4) or Fe(2)O(3)) with polymer spheres, followed by attaching silica hemispheres. The surface-accessible Fe(x)O(y) nanoparticles on the Janus-type Fe(x)O(y)@PSD nanospheres are key for directing the growth of the silica hemisphere on the Fe(x)O(y)@PSD seeds. The size and the porosity of the silica hemispheres are tunable by adjusting the amount of TEOS used and addition of a proper surfactant in a Stober-type process. After the iron oxide cores were leached out with concentrated HCl, mushroom nanostructures with hollow interiors were obtained, where the morphology of the hollow interior faithfully replicates the shape of the iron oxide core previously filling this void. This synthetic strategy provides a controllable method for the large-scale preparation of asymmetric colloidal nanostructures which could serve as building blocks for the assembly of new types of nanostructures.


Subject(s)
Nanostructures/chemistry , Colloids , Ferric Compounds/chemistry , Microscopy, Electron, Transmission , Nanospheres/chemistry , Photoelectron Spectroscopy , Polystyrenes/chemistry , Silicon Dioxide/chemistry , Stereoisomerism , Substrate Specificity
6.
Beilstein J Nanotechnol ; 1: 101-7, 2010.
Article in English | MEDLINE | ID: mdl-21977399

ABSTRACT

Magnetic γ-Fe(2)O(3) nanoparticles with a mean diameter of 20 nm and size distribution of 7% were chemically synthesized and spin-coated on top of a Si-substrate. As a result, the particles self-assembled into a monolayer with hexagonal close-packed order. Subsequently, the nanoparticle array was coated with a Co layer of 20 nm thickness. The magnetic properties of this composite nanoparticle/thin film system were investigated by magnetometry and related to high-resolution transmission electron microscopy studies. Herein three systems were compared: i.e. a reference sample with only the particle monolayer, a composite system where the particle array was ion-milled prior to the deposition of a thin Co film on top, and a similar composite system but without ion-milling. The nanoparticle array showed a collective super-spin behavior due to dipolar interparticle coupling. In the composite system, we observed a decoupling into two nanoparticle subsystems. In the ion-milled system, the nanoparticle layer served as a magnetic flux guide as observed by magnetic force microscopy. Moreover, an exchange bias effect was found, which is likely to be due to oxygen exchange between the iron oxide and the Co layer, and thus forming of an antiferromagnetic CoO layer at the γ-Fe(2)O(3)/Co interface.

SELECTION OF CITATIONS
SEARCH DETAIL
...