Potential use of red hibiscus flower extract for the production of spray-chilled microparticles: Characterization, stability, and bioaccessibility in vitro of anthocyanins.

Microparticles (MLP) containing red hibiscus flower (Hibiscus rosa-sinensis) anthocyanins were produced by spray chilling, and characterized for physicochemical parameters, accelerated stability, and gastrointestinal release profile. Fully hydrogenated palm oil and cocoa butter were used as wall materials, at a lipid blend to hibiscus extract ratio of 70:30 (w/w). The lipid blends containing fully hydrogenated palm oil (FHPO) and cocoa butter (CB) were produced by ultrasound-assisted technique in the following FHPO to CB ratios: 100:0 (Control), 75:25, 50:50, 60:40, and 40:60. Increasing the cocoa butter content reduced the melting temperature and increased the unstable polymorphic behavior of the microparticles, resulting in amorphous characteristics. The microparticles exhibited higher viscosity, more agglomerates, and holes on the surface, and greater diameters. Characteristic peaks corresponding to the hibiscus extract were observed in the infrared spectra of the spray-chilled microparticles, indicating that the microencapsulation did not affect the anthocyanins. The antioxidant capacity of the red hibiscus anthocyanins ranged from 75 % to 79 %, with the best result observed for the treatment MLP_75:25. Higher antioxidant activities were observed for the lipid blends containing lower cocoa butter concentrations. Concerning the release profile of anthocyanins, the simulated GI digestion in vitro showed reduced release in the gastric tract and more intense release in the intestinal tract for an effective absorption of the antioxidant compounds in the small intestine. Furthermore, the treatment MLP_75:25 showed the highest encapsulation retention and lower total color difference in the accelerated stability study. Overall, the microparticles from all treatments were light-sensitive and thermosensitive at 35 °C. Thus, it is recommended to store the particles in a dark environment at temperatures below 35 °C for an effective use of the microparticles as natural food colorants.

Microencapsulation of ß-carotene using barley residue proteins from beer waste as coating material.

This study aimed to produce and characterise microparticles produced from barley residue proteins (BRP) enriched with ß-carotene. The microparticles were obtained by freeze-drying five emulsion formulations with 0.5% w/w whey protein concentrate and different concentrations of maltodextrin and BRP (0, 1.5, 3.0, 4.5 and 6.0% w/w), with the dispersed phase consisting of corn oil enriched with ß-carotene. The mixtures were mechanically mixed and sonicated, the formed emulsions were freeze-drying. The microparticles obtained were tested for encapsulation efficiency, humidity, hygroscopicity, apparent density, scanning electron microscopy (SEM), accelerated stability and bioaccessibility. Microparticles produced with the emulsion containing 6% w/w BRP had lower moisture content (3.47 ± 0.05%), higher encapsulation efficiency (69.11 ± 3.36%), bioaccessibility value of 84.1% and greater ß-carotene protection against thermal degradation. SEM analysis showed that microparticles had sizes ranging from 74.4 to 244.8 µm. These results show that BRP are viable for the microencapsulation of bioactive compounds by freeze-drying.

Microencapsulation by spray chilling in the food industry: Opportunities, challenges, and innovations.

Background: The increasing demand for healthy eating habits and the emergence of the COVID-19 pandemic, which resulted in a health crisis and global economic slowdown, has led to the consumption of functional and practical foods. Bioactive ingredients can be an alternative for healthy food choices; however, most functional compounds are sensitive to the adverse conditions of processing and digestive tract, impairing its use in food matrices, and industrial-scale applications. Microencapsulation by spray chilling can be a viable alternative to reduce these barriers in food processing. Scope and approach: This review discusses the use of spray chilling technique for microencapsulation of bioactive food ingredients. Although this technology is known in the pharmaceutical industry, it has been little exploited in the food sector. General aspects of spray chilling, the process parameters, advantages, and disadvantages are addressed. The feasibility and stability of encapsulated bioactive ingredients in food matrices and the bioavailability in vitro of solid lipid microparticles produced by spray chilling are also discussed. Main findings and conclusions: Research on the microencapsulation of bioactive ingredients by spray chilling for use in foods has shown the effectiveness of this technique to encapsulate bioactive compounds for application in food matrices. Solid microparticles produced by spray chilling can improve the stability and bioavailability of bioactive ingredients. However, further studies are required, including the use of lipid-based encapsulating agents, process parameters, and novel formulations for application in food, beverages, and packaging, as well as in vivo studies to prove the effectiveness of the formulations.

Development of alginate/pectin microcapsules by a dual process combining emulsification and ultrasonic gelation for encapsulation and controlled release of anthocyanins from grapes (Vitis labrusca L.).

The aim of this study was to investigate the physicochemical, morphological, and gastrointestinal release properties of an anthocyanin-rich extract of grapes in alginate and pectin beads as carriers; the effects of ultrasonic gelation combined with emulsification were also investigated. In general, the alginate beads showed smaller size and more regular shape compared to pectin. The effect of emulsification combined with ionic gelation was more pronounced in the alginate beads and resulted in higher retention of anthocyanins, higher antioxidant capacity, and also allowed the best release profile during intestinal digestion. Thus, the simultaneous strategy could be an interesting delivery system and enhance the release of anthocyanins, providing an opportunity for the development of ingredients with different bioactive properties.

Use of prebiotic carbohydrate as wall material on lime essential oil microparticles.

The aim of this work was to study the use of different prebiotic biopolymers in lime essential oil microencapsulation. Whey protein isolate, inulin and oligofructose biopolymers were used. The addition of prebiotic biopolymers reduced emulsion viscosity, although it produced larger droplet sizes (0.31-0.32 µm). Moisture values (2.94-3.13 g/100 g dry solids) and water activity (0.152-0.185) were satisfactory, being within the appropriate range for powdered food quality. Total oil content, limonene retention values and antioxidant activity of the microparticles containing essential oil decreased in the presence of the carbohydrates. The addition of prebiotic biopolymers reduced the microparticle thermal stability. X-ray diffraction confirmed the amorphous characteristic of the microparticles and the interaction of the essential oil with the wall material. The presence of prebiotic biopolymers can be a good alternative for lime essential oil microparticles, mainly using fibre that has a functional food appeal and can improve consumer health.

Prebiotic Carbohydrates: Effect on Reconstitution, Storage, Release, and Antioxidant Properties of Lime Essential Oil Microparticles.

The aim of this study was to include prebiotic biopolymers as wall material in microparticles of lime essential oil. Whey protein isolate (WPI), inulin (IN), and oligofructose (OL) biopolymers were used in the following combinations: WPI, WPI/IN (4:1), and WPI/OL (4:1). The emulsion droplets in the presence of inulin and oligofructose showed larger sizes on reconstitution. There was no significant difference in solubility of the particles, but the wettability was improved on addition of the polysaccharides. The size of the oligofructose chains favored the adsorption of water. Prebiotic biopolymers reduced thermal and chemical stability of the encapsulated oil. Microparticles produced with WPI showed a higher bioactive compound release rate, mainly due to its structural properties, that enabled rapid diffusion of oil through the pores. The use of prebiotic biopolymers can be a good option to add value to encapsulated products, thus promoting health benefits.