Explicit Expressions for a Mean Nanofibre Diameter Using Input Parameters in the Process of Electrospinning.

The process of electrospinning is subject to a variety of input parameters ranging from the characterization of polymers and solvents, the resulting solutions, the geometrical configuration of the device, including its process parameters, and ending with crucial parameters such as temperature and humidity. It is not possible to expect that functional expressions relating all these parameters can be derived in a common description. Nevertheless, it is possible to fix the majority of these parameters to derive explicit relations for a restricted number of entry parameters such that it contributes to the partial elimination of the classical trial-and-error method saving time and financial costs. However, several contributions providing such results are rather moderate. Special attention is provided to fibre diameter approximation as this parameter strongly influences the application of nanofibrous mats in various instances such as air filtration, tissue engineering, and drug delivery systems. Various difficulties connected with the derivation of these explicit relations are presented and discussed in detail.

Modification of Polyvinyl Chloride Composites for Radiographic Detection of Polyvinyl Chloride Retained Surgical Items.

The ever-present risk of surgical items being retained represents a real medical peril for the patient and potential liability issues for medical staff. Radiofrequency scanning technology is a very good means to substantially reduce such accidents. Radiolucent medical-grade polyvinyl chloride (PVC) used for the production of medical items is filled with radiopaque agents to enable X-ray visibility. The present study proves the suitability of bismuth oxychloride (BiOCl) and documents its advantages over the classical radiopaque agent barium sulfate (BaSO4). An addition of BiOCl exhibits excellent chemical and physical stability (no leaching, thermo-mechanical properties) and good dispersibility within the PVC matrix. As documented, using half the quantity of BiOCl compared to BaSO4 will provide a very good result. The conclusions are based on the methods of rotational rheometry, scanning electron microscopy, dynamic mechanical analysis, atomic absorption spectroscopy, and the verification of zero leaching of BiOCl out of a PVC matrix. X-ray images of the studied materials are presented, and an optimal concentration of BiOCl is evaluated.

Electrospun Sound-Absorbing Nanofibrous Webs from Recycled Poly(vinyl butyral).

The amount of poly(vinyl butyral) (PVB) foils added to car windscreens to suppress glass shattering represents a huge worldwide volume of the material, and once a vehicle is end-of-life it also becomes a significance contributor to landfill. The recycling of PVB materials from windscreens has been expensive and despite improvements in recycling technologies, the landfill burden still increases. However, an increase in oil prices can shift the economic balance and stimulates the possible applicability of recycled PVB. As PVB is a relatively easy electrospinnable material, it is shown that nanofibrous mats produced from recycled PVB blends in ethanol exhibit very good sound-absorbing properties. To achieve an optimal composition between virgin and recycled PVB blends, a series of their ratios was consecutively characterized using various techniques (rheometry, SEM, FTIR, DSC, TGA, DMA, an impedance tube for determining sound absorbance). The best result was obtained with two wt. portions of 8 wt.% solution of virgin PVB in ethanol and one wt. portion of 12 wt.% solution of recycled PVB in ethanol.

Electrospinning of a Copolymer PVDF-co-HFP Solved in DMF/Acetone: Explicit Relations among Viscosity, Polymer Concentration, DMF/Acetone Ratio and Mean Nanofiber Diameter.

The process of electrospinning polymer solutions depends on many entry parameters, with each having a significant impact on the overall process and where complexity prevents the expression of their interplay. However, under the assumption that most parameters are fixed, it is possible to evaluate the mutual relations between pairs or triples of the chosen parameters. In this case, the experiments were carried out with a copolymer poly(vinylidene-co-hexafluoropropylene) solved in mixed N,N'-dimethylformamide (DMF)/acetone solvent for eight polymer concentrations (8, 10, 12, 15, 18, 21, 24, and 27 wt.%) and five DMF/acetone ratios (1/0, 4/1, 2/1, 1/1, 1/2). Processing of the obtained data (viscosity, mean nanofiber diameter) aimed to determine algebraic expressions relating both to viscosity and a mean nanofiber diameter with polymer concentration, as well as DMF/acetone ratio. Moreover, a master curve relating these parameters with no fitting factors was proposed continuously covering a sufficiently broad range of concentration as well as DMF/acetone ratio. A comparison of algebraic evaluation with the experimental data seems to be very good (the mean deviation for viscosity was about 2%, while, for a mean nanofiber diameter was slightly less than 10%).

Antibacterial Filtration Membranes Based on PVDF-co-HFP Nanofibers with the Addition of Medium-Chain 1-Monoacylglycerols.

The efficiency of filtration membranes is substantially lowered by bacterial attachments and potential fouling processes, which reduce their durability and lifecycle. The antibacterial and antifouling properties exhibited by the added materials play a substantial role in their application. We tested a material poly(vinylidene fluoride)-co-hexafluoropropylene (PDVF-co-HFP) based on an electrospun copolymer, where an agent was incorporated with a small amount of ester of glycerol consecutively with caprylic, capric, and lauric acids. Each of these three materials differing in the esters (1-monoacylglycerol, 1-MAG) used was prepared with three weighted concentrations of 1-MAG (1, 2, and 3 wt %). The presence of 1-MAG with an amphiphilic structure resulted in the hydrophilic character of the prepared materials that contributed to the filtration performance. The tested materials (membranes) were characterized with rheological, optical (scanning electron microscopy, SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and other methods to evaluate antibacterial and antifouling activities. The pure water flux was 6 times higher than that of the neat PVDF-co-HFP membrane when the added 1-MAG attained only 1 wt %. It was experimentally shown that the PVDF-co-HFP/1-MAG membrane with high wettability improved antibacterial activity and antifouling ability. This membrane is highly promising for water treatment due to the safety of antibacterial 1-MAG additives.

An Estimate of the Onset of Beadless Character of Electrospun Nanofibers Using Rheological Characterization.

Electrospinning represents the very effective process of producing nanofibrous mats. This process is influenced by a number of mutually and strongly interlaced entry parameters (characteristics of polymer, solvent, process parameters) and their participation in the resulting nanofiber quality. The appearance of nanofibers is a result of the necessary primary experimental parameter setting within an acceptable range. However, finer analysis of nanofiber quality depends on the proper choice of these individual factors. The aim of this contribution is to evaluate one of the key factors-polymer concentration-with respect to the presence or absence of bead formation. This passage can be approximated by rheological oscillatory measurements when a sudden decrease in phase angle indicates this change. It replaces otherwise time- and cost-consuming trial-and-error experiments. This approach was tested using three different materials: solutions of poly(vinylidene fluoride-co-hexafluoropropylene), poly(vinyl butyral), and poly(ethylene oxide).

Two Ways to Examine Differential Constitutive Equations: Initiated on Steady or Initiated on Unsteady (LAOS) Shear Characteristics.

The exponential Phan⁻Tien and Tanner (PTT), Giesekus, Leonov, and modified extended Pom⁻Pom (mXPP) differential constitutive models are evaluated in two ways: with regard to steady shear characteristics and with regard to large amplitude oscillatory shear characteristics of a solution of poly(ethylene oxide) in dimethyl sulfoxide. Efficiency of the models with nonlinear parameters optimized with respect to steady shear measurements is evaluated by their ability to describe large amplitude oscillatory shear (LAOS) characteristics. The reciprocal problem is also analyzed: The nonlinear parameters are optimized with respect to the LAOS measurements, and the models are confronted with the steady shear characteristics. In this case, optimization is based on the LAOS measurements and equal emphasis is placed on both real and imaginary parts of the stress amplitude. The results show that the chosen models are not adequately able to fit the LAOS characteristics if the optimization of nonlinear parameters is based on steady shear measurements. It follows that the optimization of nonlinear parameters is much more responsible if it is carried out with respect to the LAOS data. In this case, when the optimized parameters are used for a description of steady shear characteristics, efficiency of the individual models as documented differs.

Tailoring the magnetic properties and magnetorheological behavior of spinel nanocrystalline cobalt ferrite by varying annealing temperature.

Magnetic nanoparticles of spinel nanocrystalline cobalt ferrite were synthesized via the sol-gel method and subsequent annealing. The influence of the annealing temperature on the structure, magnetic properties, and magnetorheological effect was investigated. The finite crystallite size of the particles, determined by X-ray diffraction and the particle size observed via transmission electron microscopy, increased with the annealing temperature. The magnetic properties observed via a vibrating sample magnetometer showed that an increase in the annealing temperature leads to the increase in the magnetization saturation and, in contrast, a decrease in the coercivity. The effect of annealing on the magnetic properties of ferrite particles has been explained by the recrystallization process at high temperatures. This resulted in grain size growth and a decrease in an imposed stress relating to defects in the crystal lattice structure of the nanoparticles. The magnetorheological characteristics of suspensions of ferrite particles in silicone oil were measured using a rotational rheometer equipped with a magnetic field generator in both steady shear and small-strain oscillatory regimes. The magnetorheological performance expressed as a relative increase in the magnetoviscosity appeared to be significantly higher for suspensions of particles annealed at 1000 °C.

Improved thermooxidation and sedimentation stability of covalently-coated carbonyl iron particles with cholesteryl groups and their influence on magnetorheology.

Sedimentation of particles in magnetorheological suspensions represents a crucial problem that concerns their efficient long-term application in practice. Prepared carbonyl iron (CI) microparticles coated with a low density substance, cholesteryl chloroformate, via a two-step reaction and immersed in silicone oil, exhibit three positive aspects: (1) the CI particle modification increased the compatibility between the particles and the silicone oil resulting in improved long-term stability (reduction in sedimentation); (2) the coating provided the particles with enhanced thermal stability in the oxygen atmosphere; and (3) rheological measurements proved a promising magnetorheological performance at different particle weight fractions.