Effect of V/III ratio on the structural and optical properties of self-catalysed GaAs nanowires.

The performance of GaAs nanowire (NW) devices depends critically on the presence of crystallographic defects in the NWs such as twinning planes and stacking faults, and considerable effort has been devoted to understanding and preventing the occurrence of these. For self-catalysed GaAs NWs grown by molecular beam epitaxy (MBE) in particular, there are in addition other types of defects that may be just as important for NW-based optoelectronic devices. These are the point defects such as the As vacancy and the Ga antisite occurring due to the inherently Ga-rich conditions of the self-catalysed growth. Here we demonstrate experimentally the effects of these point defects on the optical properties of GaAs/AlGaAs core-shell NWs grown by self-catalysed MBE. The present results enable insight into the role of the point defects both on their own and in conjunction with crystallographic planar defects.

In situ electronic probing of semiconducting nanowires in an electron microscope.

For the development of electronic nanoscale structures, feedback on its electronic properties is crucial, but challenging. Here, we present a comparison of various in situ methods for electronically probing single, p-doped GaAs nanowires inside a scanning electron microscope. The methods used include (i) directly probing individual as-grown nanowires with a sharp nano-manipulator, (ii) contacting dispersed nanowires with two metal contacts and (iii) contacting dispersed nanowires with four metal contacts. For the last two cases, we compare the results obtained using conventional ex situ litho-graphy contacting techniques and by in situ, direct-write electron beam induced deposition of a metal (Pt). The comparison shows that 2-probe measurements gives consistent results also with contacts made by electron beam induced deposition, but that for 4-probe, stray deposition can be a problem for shorter nanowires. This comparative study demonstrates that the preferred in situ method depends on the required throughput and reliability.

Position-controlled uniform GaAs nanowires on silicon using nanoimprint lithography.

We report on the epitaxial growth of large-area position-controlled self-catalyzed GaAs nanowires (NWs) directly on Si by molecular beam epitaxy (MBE). Nanohole patterns are defined in a SiO2 mask on 2 in. Si wafers using nanoimprint lithography (NIL) for the growth of positioned GaAs NWs. To optimize the yield of vertical NWs the MBE growth parameter space is tuned, including Ga predeposition time, Ga and As fluxes, growth temperature, and annealing treatment prior to NW growth. In addition, a non-negligible radial growth is observed with increasing growth time and is found to be independent of the As species (i.e., As2 or As4) and the growth temperatures studied. Cross-sectional transmission electron microscopy analysis of the GaAs NW/Si substrate heterointerface reveals an epitaxial growth where NW base fills the oxide hole opening and eventually extends over the oxide mask. These findings have important implications for NW-based device designs with axial and radial p-n junctions. Finally, NIL positioned GaAs/AlGaAs core-shell heterostructured NWs are grown on Si to study the optical properties of the NWs. Room-temperature photoluminescence spectroscopy of ensembles of as-grown core-shell NWs reveals uniform and high optical quality, as required for the subsequent device applications. The combination of NIL and MBE thereby demonstrates the successful heterogeneous integration of highly uniform GaAs NWs on Si, important for fabricating high throughput, large-area position-controlled NW arrays for various optoelectronic device applications.

Controlling crystal phases in GaAs nanowires grown by Au-assisted molecular beam epitaxy.

Control of the crystal phases of GaAs nanowires (NWs) is essential to eliminate the formation of stacking faults which deteriorate the optical and electronic properties of the NWs. In addition, the ability to control the crystal phase of NWs provides an opportunity to engineer the band gap without changing the crystal material. We show that the crystal phase of GaAs NWs grown on GaAs(111)B substrates by molecular beam epitaxy using the Au-assisted vapor-liquid-solid growth mechanism can be tuned between wurtzite (WZ) and zinc blende (ZB) by changing the V/III flux ratio. As an example we demonstrate the realization of WZ GaAs NWs with a ZB GaAs insert that has been grown without changing the substrate temperature.

Correlated micro-photoluminescence and electron microscopy studies of the same individual heterostructured semiconductor nanowires.

To correlate optical properties to structural characteristics, we developed a robust strategy for characterizing the same individual heterostructured semiconductor nanowires (NWs) by alternating low temperature micro-photoluminescence (µ-PL), low voltage scanning (transmission) electron microscopy and conventional transmission electron microscopy. The NWs used in this work were wurtzite GaAs core with zinc blende GaAsSb axial insert and AlGaAs radial shell grown by molecular beam epitaxy. The series of experiments demonstrated that high energy (200 kV) electrons are detrimental for the optical properties, whereas medium energy (5-30 kV) electrons do not affect the PL response. Thus, such medium energy electrons can be used to select NWs for correlated optical-structural studies prior to µ-PL or in NW device processing. The correlation between the three main µ-PL bands and crystal phases of different compositions, present in this heterostructure, is demonstrated for selected NWs. The positions where a NW fractures during specimen preparation can considerably affect the PL spectra of the NW. The effects of crystal-phase variations and lattice defects on the optical properties are discussed. The established strategy can be applied to other nanosized electro-optical materials, and other characterization tools can be incorporated into this routine.

Wurtzite GaAs/AlGaAs core-shell nanowires grown by molecular beam epitaxy.

We report the growth of GaAs/AlGaAs core-shell nanowires (NWs) on GaAs(111)B substrates by Au-assisted molecular beam epitaxy. Electron microscopy shows the formation of a wurtzite AlGaAs shell structure both in the radial and the axial directions outside a wurtzite GaAs core. With higher Al content, a lower axial and a higher radial growth rate of the AlGaAs shell were observed. Room temperature and low temperature (4.4 K) micro-photoluminescence measurements show a much higher radiative efficiency from the GaAs core after the NW is overgrown with a radial AlGaAs shell.

Zinc blende GaAsSb nanowires grown by molecular beam epitaxy.

We report the growth of GaAsSb nanowires (NWs) on GaAs(111)B substrates by Au-assisted molecular beam epitaxy. The structural characteristics of the GaAsSb NWs have been investigated in detail. Their Sb mole fraction was found to be about 25%. Their crystal structure was found to be pure zinc blende (ZB), in contrast to the wurtzite structure observed in GaAs NWs grown under similar conditions. The ZB GaAsSb NWs exhibit rotational twins around their [111]B growth axis, with twin-free segments as long as 500 nm. The total volumes of GaAsSb segments with twinned and un-twinned orientations, respectively, were found to be equal by x-ray diffraction analysis of NW ensembles.