Gold nanoparticle assisted synthesis of MoS2 monolayers by chemical vapor deposition.

The use of metal nanoparticles is an established paradigm for the synthesis of semiconducting one-dimensional nanostructures. In this work we study their effect on the synthesis of two-dimensional semiconducting materials, by using gold nanoparticles for chemical vapor deposition growth of two-dimensional molybdenum disulfide (MoS2). In comparison with the standard method, the employment of gold nanoparticles allows us to obtain large monolayer MoS2 flakes, up to 20 µm in lateral size, even if they are affected by the localized overgrowth of MoS2 bilayer and trilayer islands. Important modifications of the optical and electronic properties of MoS2 triangular domains are reported, where the photoluminescence intensity of the A exciton is strongly quenched and a shift to a positive threshold voltage in back-gated field effect transistors is observed. These results indicate that the use of gold nanoparticles influences the flake growth and properties, indicating a method for possible localized synthesis of two-dimensional materials, improving the lateral size of monolayers and modifying their properties.

Understanding the role of threading dislocations on 4H-SiC MOSFET breakdown under high temperature reverse bias stress.

The origin of dielectric breakdown was studied on 4H-SiC MOSFETs that failed after three months of high temperature reverse bias stress. A local inspection of the failed devices demonstrated the presence of a threading dislocation (TD) at the breakdown location. The nanoscale origin of the dielectric breakdown was highlighted with advanced high-spatial-resolution scanning probe microscopy (SPM) techniques. In particular, SPM revealed the conductive nature of the TD and a local increase of the minority carrier concentration close to the defect. Numerical simulations estimated a hole concentration 13 orders of magnitude larger than in the ideal 4H-SiC crystal. The hole injection in specific regions of the device explained the failure of the gate oxide under stress. In this way, the key role of the TD in the dielectric breakdown of 4H-SiC MOSFET was unambiguously demonstrated.

Probing the uniformity of hydrogen intercalation in quasi-free-standing epitaxial graphene on SiC by micro-Raman mapping and conductive atomic force microscopy.

In this paper, micro-Raman mapping and conductive atomic force microscopy (C-AFM) were jointly applied to investigate the structural and electrical homogeneity of quasi-free-standing monolayer graphene (QFMLG), obtained by high temperature decomposition of 4H-SiC(0001) followed by hydrogen intercalation at 900 °C. Strain and doping maps, obtained by Raman data, showed the presence of sub-micron patches with reduced hole density correlated to regions with higher compressive strain, probably associated with a locally reduced hydrogen intercalation. Nanoscale resolution electrical maps by C-AFM also revealed the presence of patches with enhanced current injection through the QFMLG/SiC interface, indicating a locally reduced Schottky barrier height (ΦB). The ΦB values evaluated from local I-V curves by the thermionic emission model were in good agreement with the values calculated for the QFMLG/SiC interface using the Schottky-Mott rule and the graphene holes density from Raman maps. The demonstrated approach revealed a useful and non-invasive method to probe the structural and electrical homogeneity of QFMLG for future nano-electronics applications.