Control of Particle Properties in Thermally-Induced Precipitation of Polyetherimide.

The feasibility of thermally-induced phase separation and crystallization for the production of semi-crystalline polyetherimide (PEI) microparticles from an amorphous feedstock has been reported recently. Here, we investigate process parameter dependencies for designing and control of particle properties. A stirred autoclave was used to extend the process controllability, as the applied process parameters, e.g., stirring speed and cooling rate, were adjusted. By increasing the stirring speed, the particle size distribution was shifted to larger values (correlation factor ρ = 0.77). Although, the enhanced droplet breakup, induced by the higher stirring speed, led to the formation of smaller particles (ρ = -0.68), broadening the particle size distribution. The cooling rate showed a significant influence on the melting temperature, reducing it with a correlation factor of ρ = -0.77, as confirmed by differential scanning calorimetry. Lower cooling rates led to larger crystalline structures and enhanced the degree of crystallinity. The polymer concentration mainly affected the resulting enthalpy of fusion, as an increased polymer fraction enhanced the latter (correlation factor ρ = 0.96). In addition, the circularity of the particles was positively correlated to the polymer fraction (ρ = 0.88). The structure assessed via X-ray diffraction, was not affected.

Isomerism control of diethylstilbestrol by metal surface induced O-H cleavage.

Diethylstilbestrol (DES) is studied on Ag(111) and Cu(111) surfaces using X-ray photoelectron spectroscopy (XPS) and scanning tunnelling microscopy (STM). We find that DES molecules on the silver surface adsorb intact and adopt a trans-conformation. On the more reactive copper surface, O-H bond cleavage results in molecular adsorption in the cis-conformation, thus providing the means of obtaining different adsorption geometries. The difference in isomerism is reflected in the observed self-assemblies which exhibit room-temperature stability.

Dynamics of Spatially Confined Bisphenol A Trimers in a Unimolecular Network on Ag(111).

Bisphenol A (BPA) aggregates on Ag(111) shows a polymorphism between two supramolecular motifs leading to formation of distinct networks depending on thermal energy. With rising temperature a dimeric pairing scheme reversibly converts into a trimeric motif, which forms a hexagonal superstructure with complex dynamic characteristics. The trimeric arrangements notably organize spontaneously into a self-assembled one-component array with supramolecular BPA rotors embedded in a two-dimensional stator sublattice. By varying the temperature, the speed of the rotors can be controlled as monitored by direct visualization. A combination of scanning tunneling microscopy and dispersion-corrected density-functional tight-binding (DFTB-vdW(surf)) based molecular modeling reveals the exact atomistic position of each molecule within the assembly as well as the driving force for the formation of the supramolecular rotors.

Surface-Assisted Cyclodehydrogenation; Break the Symmetry, Enhance the Selectivity.

Selectivity in chemical reactions is a major objective in industrial processes to minimize spurious byproducts and to save scarce resources. In homogeneous catalysis the most important factor which determines selectivity is structural symmetry. However, a transfer of the symmetry concept to heterogeneous catalysis still requires a detailed comprehension of the underlying processes. Here, we investigate a ring-closing reaction in surface-confined meso-substituted porphyrin molecules by scanning tunneling microscopy, temperature-programmed desorption, and computational modeling. The identification of reaction intermediates enables us to analyze the reaction pathway and to conclude that the symmetry of the porphyrin core is of pivotal importance regarding product yields.

Temperature-dependent templated growth of porphine thin films on the (111) facets of copper and silver.

The templated growth of the basic porphyrin unit, free-base porphine (2H-P), is characterized by means of X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine-structure (NEXAFS) spectroscopy measurements and density functional theory (DFT). The DFT simulations allow the deconvolution of the complex XPS and NEXAFS signatures into contributions originating from five inequivalent carbon atoms, which can be grouped into C-N and C-C bonded species. Polarization-dependent NEXAFS measurements reveal an intriguing organizational behavior: On both Cu(111) and Ag(111), for coverages up to one monolayer, the molecules adsorb undeformed and parallel to the respective metal surface. Upon increasing the coverage, however, the orientation of the molecules in the thin films depends on the growth conditions. Multilayers deposited at low temperatures exhibit a similar average tilting angle (30° relative to the surface plane) on both substrates. Conversely, for multilayers grown at room temperature a markedly different scenario exists. On Cu(111) the film thickness is self-limited to a coverage of approximately two layers, while on Ag(111) multilayers can be grown easily and, in contrast to the bulk 2H-P crystal, the molecules are oriented perpendicular to the surface. This difference in molecular orientation results in a modified line-shape of the C 1s XPS signatures, which depends on the incident photon energy and is explained by comparison with depth-resolved DFT calculations. Simulations of ionization energies for differently stacked molecules show no indication for a packing-induced modification of the multilayer XP spectra, thus indicating that the comparison of single molecule calculations to multilayer data is justified.

Surface-assisted dehydrogenative homocoupling of porphine molecules.

The templated synthesis of porphyrin dimers, oligomers, and tapes has recently attracted considerable interest. Here, we introduce a clean, temperature-induced covalent dehydrogenative coupling mechanism between unsubstituted free-base porphine units yielding dimers, trimers, and larger oligomers directly on a Ag(111) support under ultrahigh-vacuum conditions. Our multitechnique approach, including scanning tunneling microscopy, near-edge X-ray absorption fine structure and photoelectron spectroscopy complemented by theoretical modeling, allows a comprehensive characterization of the resulting nanostructures and sheds light on the coupling mechanism. We identify distinct coupling motifs and report a decrease of the electronic gap and a modification of the frontier orbitals directly associated with the formation of triply fused dimeric species. This new on-surface homocoupling protocol yields covalent porphyrin nanostructures addressable with submolecular resolution and provides prospective model systems towards the exploration of extended oligomers with tailored chemical and physical properties.

Self-assembly and chemical modifications of bisphenol a on Cu(111): interplay between ordering and thermally activated stepwise deprotonation.

Bisphenol A (BPA) is a chemical widely used in the synthesis pathway of polycarbonates for the production of many daily used products. Besides other adverse health effects, medical studies have shown that BPA can cause DNA hypomethylation and therefore alters the epigenetic code. In the present work, the reactivity and self-assembly of the molecule was investigated under ultra-high-vacuum conditions on a Cu(111) surface. We show that the surface-confined molecule goes through a series of thermally activated chemical transitions. Scanning tunneling microscopy investigations showed multiple distinct molecular arrangements dependent on the temperature treatment and the formation of polymer-like molecular strings for temperatures above 470 K. X-ray photoelectron spectroscopy measurements revealed the stepwise deprotonation of the hydroxy groups, which allows the molecules to interact strongly with the underlying substrate as well as their neighboring molecules and therefore drive the organization into distinct structural arrangements. On the basis of the combined experimental evidence in conjunction with density functional theory calculations, structural models for the self-assemblies after the thermal treatment were elaborated.

Self-terminating protocol for an interfacial complexation reaction in vacuo by metal-organic chemical vapor deposition.

The fabrication and control of coordination compounds or architectures at well-defined interfaces is a thriving research domain with promise for various research areas, including single-site catalysis, molecular magnetism, light-harvesting, and molecular rotors and machines. To date, such systems have been realized either by grafting or depositing prefabricated metal-organic complexes or by protocols combining molecular linkers and single metal atoms at the interface. Here we report a different pathway employing metal-organic chemical vapor deposition, as exemplified by the reaction of meso-tetraphenylporphyrin derivatives on atomistically clean Ag(111) with a metal carbonyl precursor (Ru3(CO)12) under vacuum conditions. Scanning tunneling microscopy and X-ray spectroscopy reveal the formation of a meso-tetraphenylporphyrin cyclodehydrogenation product that readily undergoes metalation after exposure to the Ru-carbonyl precursor vapor and thermal treatment. The self-terminating porphyrin metalation protocol proceeds without additional surface-bound byproducts, yielding a single and thermally robust layer of Ru metalloporphyrins. The introduced fabrication scheme presents a new approach toward the realization of complex metal-organic interfaces incorporating metal centers in unique coordination environments.

Five-vertex Archimedean surface tessellation by lanthanide-directed molecular self-assembly.

The tessellation of the Euclidean plane by regular polygons has been contemplated since ancient times and presents intriguing aspects embracing mathematics, art, and crystallography. Significant efforts were devoted to engineer specific 2D interfacial tessellations at the molecular level, but periodic patterns with distinct five-vertex motifs remained elusive. Here, we report a direct scanning tunneling microscopy investigation on the cerium-directed assembly of linear polyphenyl molecular linkers with terminal carbonitrile groups on a smooth Ag(111) noble-metal surface. We demonstrate the spontaneous formation of fivefold Ce-ligand coordination motifs, which are planar and flexible, such that vertices connecting simultaneously trigonal and square polygons can be expressed. By tuning the concentration and the stoichiometric ratio of rare-earth metal centers to ligands, a hierarchic assembly with dodecameric units and a surface-confined metal-organic coordination network yielding the semiregular Archimedean snub square tiling could be fabricated.

How surface bonding and repulsive interactions cause phase transformations: ordering of a prototype macrocyclic compound on Ag(111).

We investigated the surface bonding and ordering of free-base porphine (2H-P), the parent compound of all porphyrins, on a smooth noble metal support. Our multitechnique investigation reveals a surprisingly rich and complex behavior, including intramolecular proton switching, repulsive intermolecular interactions, and density-driven phase transformations. For small concentrations, molecular-level observations using low-temperature scanning tunneling microscopy clearly show the operation of repulsive interactions between 2H-P molecules in direct contact with the employed Ag(111) surface, preventing the formation of islands. An increase of the molecular coverage results in a continuous decrease of the average intermolecular distance, correlated with multiple phase transformations: the system evolves from an isotropic, gas-like configuration via a fluid-like phase to a crystalline structure, which finally gives way to a disordered layer. Herein, considerable site-specific molecule-substrate interactions, favoring an exclusive adsorption on bridge positions of the Ag(111) lattice, play an important role. Accordingly, the 2D assembly of 2H-P/Ag(111) layers is dictated by the balance between adsorption energy maximization while retaining a single adsorption site counteracted by the repulsive molecule-molecule interactions. The long-range repulsion is associated with a charge redistribution at the 2H-P/Ag(111) interface comprising a partial filling of the lowest unoccupied molecular orbital, resulting in long-range electrostatic interactions between the adsorbates. Indeed, 2H-P molecules in the second layer that are electronically only weakly coupled to the Ag substrate show no repulsive behavior, but form dense-packed islands.

Homo-coupling of terminal alkynes on a noble metal surface.

The covalent linking of acetylenes presents an important route for the fabrication of novel carbon-based scaffolds and two-dimensional materials distinct from graphene. To date few attempts have been reported to implement this strategy at well-defined interfaces or monolayer templates. Here we demonstrate through real space direct visualization and manipulation in combination with X-ray photoelectron spectroscopy and density functional theory calculations the Ag surface-mediated terminal alkyne C(sp)-H bond activation and concomitant homo-coupling in a process formally reminiscent of the classical Glaser-Hay type reaction. The alkyne homo-coupling takes place on the Ag(111) noble metal surface in ultrahigh vacuum under soft conditions in the absence of conventionally used transition metal catalysts and with volatile H(2) as the only by-product. With the employed multitopic ethynyl species, we demonstrate a hierarchic reaction pathway that affords discrete compounds or polymeric networks featuring a conjugated backbone. This presents a new approach towards on-surface covalent chemistry and the realization of two-dimensional carbon-rich or all-carbon polymers.

Chemical transformations drive complex self-assembly of uracil on close-packed coinage metal surfaces.

We address the interplay of adsorption, chemical nature, and self-assembly of uracil on the Ag(111) and Cu(111) surfaces as a function of molecular coverage (0.3 to 1 monolayer) and temperature. We find that both metal surfaces act as templates and the Cu(111) surface acts additionally as a catalyst for the resulting self-assembled structures. With a combination of STM, synchrotron XPS, and NEXAFS studies, we unravel a distinct polymorphism on Cu(111), in stark contrast to what is observed for the case of uracil on the more inert Ag(111) surface. On Ag(111) uracil adsorbs flat and intact and forms close-packed two-dimensional islands. The self-assembly is driven by stable hydrogen-bonded dimers with poor two-dimensional order. On Cu(111) complex structures are observed exhibiting, in addition, a strong annealing temperature dependence. We determine the corresponding structural transformations to be driven by gradual deprotonation of the uracil molecules. Our XPS study reveals unambiguously the tautomeric signature of uracil in the contact layer and on Cu(111) the molecule's deprotonation sites. The metal-mediated deprotonation of uracil and the subsequent electron localization in the molecule determine important biological reactions. Our data show a dependence between molecular coverage and molecule-metal interaction on Cu(111), as the molecules tilt at higher coverages in order to accommodate a higher packing density. After deprotonation of both uracil N atoms, we observe an adsorption geometry that can be understood as coordinative anchoring with a significant charge redistribution in the molecule. DFT calculations are employed to analyze the surface bonding and accurately describe the pertaining electronic structure.