ABSTRACT
The position of light-emitting molecules can be identified using interferometric approaches. Standard schemes utilize constructive interference to obtain a sectioned area of interest with high detection efficiency. The examination of organic light-emitting diodes (OLED) removes the common constraint of low light levels and enables a more generalized analysis. The OLED emitters are located in the front of a metal mirror, giving rise to an approximate two-wave fringe pattern in the far field. It is demonstrated theoretically and experimentally that positions around the field nodes enable the extraction of emitter distribution details within an electroluminescent layer of only 10 nm thickness.
ABSTRACT
The application of large area OLEDs for lighting and signage purposes potentially requires essential changes of the common Lambert-like emission pattern. We demonstrate an array based micro optical approach for pattern shaping of area light sources based on distorted Fourier imaging of an aperture array with a micro lens array. Narrow angular emission patterns of ± 35° and ± 18° FWHM obtained experimentally demonstrate the pattern shaping with low stray light levels. The internal recycling of initially rejected photons yields intensity enhancements exceeding a factor two in forward direction that is still well below the theoretical limits due to limited reflectivity.
ABSTRACT
We describe a method to determine the refractive index and extinction coefficient of thin film materials without prior knowledge of the film thickness and without the assumption of a dispersion model. A straightforward back calculation to the optical parameters can be performed starting from simple measurements of reflection and transmission spectra of a 100-250 nm thick supported film. The exact film thickness is found simultaneously by fulfilling the intrinsic demand of continuity of the refractive index as a function of wavelength. If both the layer and the substrate are homogeneous and isotropic media with plane and parallel interfaces, effects like surface roughness, scattering, or thickness inhomogeneities can be neglected. Then, the accuracy of the measurement is approximately 10(-2) and 10(-3) for the refractive index and the extinction coefficient, respectively. The error of the thin film thickness determination is well below 1 nm. Thus this technique is well suited to determine the input parameters for optical simulations of organic thin film devices, such as organic light-emitting diodes (OLEDs) or organic photovoltaic (OPV) cells. We apply the method to the electroluminescent polymer poly(2,5-dioctyl-p-phenylene vinylene) (PDO-PPV) and show its applicability by comparing the measured and calculated reflection and transmission spectra of OLED stacks with up to five layers.
