Strengthening the Key Features of Volumizing Fillers: Projection Capacity and Long-Term Persistence.

Volumizing fillers aim to create or restore facial volume in fat layers. To provide strong tissue lifting and long-term persistence, gels are generally designed with stiff properties, characterized by a high storage modulus (G'). However, clinical evidence shows a discrepancy between high G' and good lifting capacities, especially after skin tension has been exerted on the gel. To better explore the in vivo behavior of a gel, we first evaluated the elastic moduli of five commercial volumizers (RHA4, JUVVOL, RESVOL, RESLYFT, and BELVOL) in dynamic compression mode, E'. We further developed a Projection Index score based on the rheological assessment of creep in compression to mimic skin tension-induced stress relaxation (flattening). Finally, the ability of a gel to resist enzymatic degradation was analyzed with a multidose approach. Despite similar clinical indications, volumizers exhibited distinct behaviors. RHA4 and BELVOL showed the highest E' values (resistance to strain), RHA4, JUVVOL, and RESVOL exhibited the greatest projection capacities, while JUVVOL and RHA4 offered the largest persistence to enzymatic degradation. In this article, we introduce the use of the Projection Index to efficiently assess the ability of a gel to lift tissues, thus increasing preclinical models' efficiency and reducing the need for animal studies.

Development of an ex vivo porcine skin model for the preclinical evaluation of subcutaneously injected biomacromolecules.

Subcutaneous administration is used to deliver systemically-acting biotherapeutics, e.g. antibodies, and locally-acting biomacromolecules, e.g. hyaluronic acid. However, few preclinical models are available to evaluate post-injection behaviour in the tissue microenvironment. In vivo animal studies are costly, time-consuming, and raise obvious ethical concerns. In vitro models are cost-efficient, high-throughput solutions, but cannot simulate complex skin structure and biological function. An ex vivo model (containing hypodermis) with an extended culture period that enabled longitudinal studies would be of great interest for both the pharmaceutical and cosmeceutical industries. We describe the development of one such ex vivo model, using viable full-thickness porcine skin. Structural integrity was evaluated using a histological scoring system: spongiosis and epidermal detachment were identified as discriminating parameters. Ki67 and Claudin-1 expression reported on epidermal cell proliferation and barrier function, respectively and their expression decreased as a function of incubation time. After optimization, the system was used to investigate the fate/impact of subcutaneously administered hyaluronic acid (HA) formulations. The results showed that HA was localized at the injection site and adjacent adipocytes were well preserved during 5 days' incubation and confirmed that the full-thickness ex vivo porcine skin model could provide a platform for preclinical evaluation of subcutaneously injected biomacromolecules.

Multidose Hyaluronidase Administration as an Optimal Procedure to Degrade Resilient Hyaluronic Acid Soft Tissue Fillers.

Minimally invasive hyaluronan (HA) tissue fillers are routinely employed to provide tissue projection and correct age-related skin depressions. HA fillers can advantageously be degraded by hyaluronidase (HAase) administration in case of adverse events. However, clear guidelines regarding the optimal dosage and mode of administration of HAase are missing, leaving a scientific gap for practitioners in their daily practice. In this study, we implemented a novel rheological procedure to rationally evaluate soft tissue filler degradability and optimize their degradation kinetics. TEOSYAL RHA® filler degradation kinetics in contact with HAase was monitored in real-time by rheological time sweeps. Gels were shown to degrade as a function of enzymatic activity, HA concentration, and BDDE content, with a concomitant loss of their viscoelastic properties. We further demonstrated that repeated administration of small HAase doses improved HA degradation kinetics over large single doses. Mathematical analyses were developed to evaluate the degradation potential of an enzyme. Finally, we tuned the optimal time between injections and number of enzymatic units, maximizing degradation kinetics. In this study, we have established a scientific rationale for the degradation of HA fillers by multidose HAase administration that could serve as a basis for future clinical management of adverse events.

Cartilage tissue engineering by extrusion bioprinting utilizing porous hyaluronic acid microgel bioinks.

3D bioprinting offers an excellent opportunity to provide tissue-engineered cartilage to microtia patients. However, hydrogel-based bioinks are hindered by their dense and cell-restrictive environment, impairing tissue development and ultimately leading to mechanical failure of large scaffoldsin vivo. Granular hydrogels, made of annealed microgels, offer a superior alternative to conventional bioinks, with their improved porosity and modularity. We have evaluated the ability of enzymatically crosslinked hyaluronic acid (HA) microgel bioinks to form mature cartilagein vivo. Microgel bioinks were formed by mechanically sizing bulk HA-tyramine hydrogels through meshes with aperture diameters of 40, 100 or 500µm. Annealing of the microgels was achieved by crosslinking residual tyramines. Secondary crosslinked scaffolds were stable in solution and showed tunable porosity from 9% to 21%. Bioinks showed excellent rheological properties and were used to print different objects. Printing precision was found to be directly correlated to microgel size. As a proof of concept, freeform reversible embedding of suspended hydrogels printing with gelation triggered directly in the bath was performed to demonstrate the versatility of the method. The granular hydrogels support the homogeneous development of mature cartilage-like tissuesin vitrowith mechanical stiffening up to 200 kPa after 63 d. After 6 weeks ofin vivoimplantation, small-diameter microgels formed stable constructs with low immunogenicity and continuous tissue maturation. Conversely, increasing the microgel size resulted in increased inflammatory response, with limited stabilityin vivo. This study reports the development of new microgel bioinks for cartilage tissue biofabrication and offers insights into the foreign body reaction towards porous scaffolds implantation.

Injectable silanized hyaluronic acid hydrogel/biphasic calcium phosphate granule composites with improved handling and biodegradability promote bone regeneration in rabbits.

Biphasic calcium phosphate (BCP) granules are osteoconductive biomaterials used in clinics to favor bone reconstruction. Yet, poor cohesivity, injectability and mechanical properties restrain their use as bone fillers. In this study, we incorporated BCP granules into in situ forming silanized hyaluronic acid (Si-HA) and hydroxypropylmethylcellulose (Si-HPMC) hydrogels. Hydrogel composites were shown to be easily injectable (F < 30 N), with fast hardening properties (<5 min), and similar mechanical properties (E∼ 60 kPa). In vivo, both hydrogels were well tolerated by the host, but showed different biodegradability with Si-HA gels being partially degraded after 21d, while Si-HPMC gels remained stable. Both composites were easily injected into critical size rabbit defects and remained cohesive. After 4 weeks, Si-HPMC/BCP led to poor bone healing due to a lack of degradation. Conversely, Si-HA/BCP composites were fully degraded and beneficially influenced bone regeneration by increasing the space available for bone ingrowth, and by accelerating BCP granules turnover. Our study demonstrates that the degradation rate is key to control bone regeneration and that Si-HA/BCP composites are promising biomaterials to regenerate bone defects.

In Situ Forming, Silanized Hyaluronic Acid Hydrogels with Fine Control Over Mechanical Properties and In Vivo Degradation for Tissue Engineering Applications.

In situ forming hydrogels that can be injected into tissues in a minimally-invasive fashion are appealing as delivery vehicles for tissue engineering applications. Ideally, these hydrogels should have mechanical properties matching those of the host tissue, and a rate of degradation adapted for neo-tissue formation. Here, the development of in situ forming hyaluronic acid hydrogels based on the pH-triggered condensation of silicon alkoxide precursors into siloxanes is reported. Upon solubilization and pH adjustment, the low-viscosity precursor solutions are easily injectable through fine-gauge needles prior to in situ gelation. Tunable mechanical properties (stiffness from 1 to 40 kPa) and associated tunable degradability (from 4 days to more than 3 weeks in vivo) are obtained by varying the degree of silanization (from 4.3% to 57.7%) and molecular weight (120 and 267 kDa) of the hyaluronic acid component. Following cell encapsulation, high cell viability (> 80%) is obtained for at least 7 days. Finally, the in vivo biocompatibility of silanized hyaluronic acid gels is verified in a subcutaneous mouse model and a relationship between the inflammatory response and the crosslink density is observed. Silanized hyaluronic acid hydrogels constitute a tunable hydrogel platform for material-assisted cell therapies and tissue engineering applications.

Towards an in vitro model of the glomerular barrier unit with an innovative bioassembly method.

BACKGROUND: The development of an artificial glomerular unit may be pivotal for renal pathophysiology studies at a multicellular scale. Using a tissue engineering approach, we aimed to reproduce in part the specific glomerular barrier architecture by manufacturing a glomerular microfibre (Mf). METHODS: Immortalized human glomerular cell lines of endothelial cells (GEnCs) and podocytes were used. Cells and a three-dimensional (3D) matrix were characterized by immunofluorescence with confocal analysis, Western blot and polymerase chain reaction. Optical and electron microscopy were used to study Mf and cell shapes. We also analysed cell viability and cell metabolism within the 3D construct at 14 days. RESULTS: Using the Mf manufacturing method, we repeatedly obtained a cellularized Mf sorting human glomerular cells in 3D. Around a central structure made of collagen I, we obtained an internal layer composed of GEnC, a newly formed glomerular basement membrane rich in α5 collagen IV and an external layer of podocytes. The cell concentration, optimal seeding time and role of physical stresses were modulated to obtain the Mf. Cell viability and expression of specific proteins (nephrin, synaptopodin, vascular endothelial growth factor receptor 2 (VEGFR2) and von Willebrandt factor (vWF)) were maintained for 19 days in the Mf system. Mf ultrastructure, observed with EM, had similarities with the human glomerular barrier. CONCLUSION: In summary, with our 3D bio-engineered glomerular fibre, GEnC and podocytes produced a glomerular basement membrane. In the future, this glomerular Mf will allow us to study cell interactions in a 3D system and increase our knowledge of glomerular pathophysiology.

Toward the development of biomimetic injectable and macroporous biohydrogels for regenerative medicine.

Repairing or replacing damaged human tissues has been the ambitious goal of regenerative medicine for over 25years. One promising approach is the use of hydrated three-dimensional scaffolds, known as hydrogels, which have had good results repairing tissues in pre-clinical trials. Benefiting from breakthrough advances in the field of biology, and more particularly regarding cell/matrix interactions, these hydrogels are now designed to recapitulate some of the fundamental cues of native environments to drive the local tissue regeneration. We highlight the key parameters that are required for the development of smart and biomimetic hydrogels. We also review the wide variety of polymers, crosslinking methods, and manufacturing processes that have been developed over the years. Of particular interest is the emergence of supramolecular chemistries, allowing for the development of highly functional and reversible biohydrogels. Moreover, advances in computer assisted design and three-dimensional printing have revolutionized the production of macroporous hydrogels and allowed for more complex designs than ever before with the opportunity to develop fully reconstituted organs. Today, the field of biohydrogels for regenerative medicine is a prolific area of research with applications for most bodily tissues. On top of these applications, injectable hydrogels and macroporous hydrogels (foams) were found to be the most successful. While commonly associated with cells or biologics as drug delivery systems to increase therapeutic outcomes, they are steadily being used in the emerging fields of organs-on-chip and hydrogel-assisted cell therapy. To highlight these advances, we review some of the recent developments that have been achieved for the regeneration of tissues, focusing on the articular cartilage, bone, cardiac, and neural tissues. These biohydrogels are associated with improved cartilage and bone defects regeneration, reduced left ventricular dilation upon myocardial infarction and display promising results repairing neural lesions. Combining the benefits from each of these areas reviewed above, we envision that an injectable biohydrogel foam loaded with either stem cells or their secretome is the most promising hydrogel solution to trigger tissue regeneration. A paradigm shift is occurring where the combined efforts of fundamental and applied sciences head toward the development of hydrogels restoring tissue functions, serving as drug screening platforms or recreating complex organs.