The Effects of Engineered Skeletal Muscle on Volumetric Muscle Loss in The Tibialis Anterior Of Rat After Three Months In Vivo.

Volumetric muscle loss (VML) is traumatic, degenerative, or surgical loss of skeletal muscle that exceeds the regenerative capacity of the remaining muscle, thus resulting in impaired muscle function. In humans, the loss of 30% or more mass of any one muscle will result in permanent structural and functional loss. Current VML repair treatments are limited by donor site morbidity and graft tissue availability, necessitating alternative muscle graft sources. To address this need, our lab has fabricated tissue-engineered skeletal muscle units (SMUs) for implantation into a 30 % VML model in the tibialis anterior (TA) muscle of rat. Previous results showed that after 28 days in vivo, muscle with a 30% VML repaired with our SMUs produced significantly more force than muscle with acute VML. But repair with our SMU did not fully restore muscle force production to that of native muscle. Thus, we hypothesized that more time for in vivo tissue regeneration would allow for greater force recovery. Therefore, the purpose of this study was to examine the long-term (3-month) effects of our SMUs on a 30% VML repair. We also assessed the effects of reinnervation by redirecting a branch of the peroneal nerve to the repair site. Thirty-nine, 2-month old female F344 rats were separated into a nonsurgical control group (n=5) and four surgical experimental groups (VML Only, n=5; VML+Nerve Redirect, n=6; VML+SMU, n=5; VML+SMU+ Nerve Redirect, n=8). Experimental rats were allowed a 3-month recovery period post-surgery before undergoing in situ force testing of the surgical (left) TA. The left TA of the control animals also underwent in situ force testing. Finally, the surgical (left) and contralateral (right) TAs of the experimental animals, as well as the left TA of the control animals, were explanted for histological analysis. Results for specific force showed that while all groups recovered specific forces similar to that of native muscle, the two SMU groups had significantly higher specific forces, on average, compared to the uninjured control group. Histological staining showed small muscle fibers in the repair site in animals that received an SMU. The average cross-sectional area of the native fibers just outside the area of repair (or the equivalent area in control animals) was not significantly different between groups, indicating that hypertrophy of remaining fibers did not contribute to the recovery of force following the VML. Our results suggest that following a 30% VML of the TA muscle, all surgical groups were able to recover TA mass, maximum tetanic and specific force production. Thus, creating a 30% VML in the TA in a rat model is not enough a sufficient VML to produce the sustained VML seen in humans following similar 30% loss of muscle volume.

The Maturation of Tissue-Engineered Skeletal Muscle Units following 28-Day Ectopic Implantation in a Rat.

Volumetric muscle loss (VML) is a loss of skeletal muscle that results in a sustained impairment of function and is often accompanied by physical deformity. To address the need for more innovative repair options, our laboratory has developed scaffold-free, multiphasic tissue-engineered skeletal muscle units (SMUs) to treat VML injuries. In our previous work, using the concept of the "body as a bioreactor", we have shown that implantation promotes the maturation of our SMUs beyond what is possible in vitro. Thus, in this study we sought to better understand the effect of implantation on the maturation of our SMUs, including the effects of implantation on SMU force production and cellular remodeling. We used an ectopic implantation so that we could more easily dissect the implanted tissues post-recovery and measure the force contribution of the SMU alone and compare it to pre-implantation values. This study also aimed to scale up the size of our SMUs to enable the replacement of larger volumes of muscle in our future VML studies. Overall, implantation resulted in extensive maturation of the SMUs, as characterized by an increase in force production, substantial integration with native tissue, innervation, vascularization, and the development of structural organization similar to native tissue.

Effects of Dexamethasone Dose and Timing on Tissue-Engineered Skeletal Muscle Units.

Our lab showed that administration of dexamethasone (DEX) stimulated myogenesis and resulted in advanced structure in our engineered skeletal muscle units (SMU). While administration of 25 nM DEX resulted in the most advanced structure, 10 nM dosing resulted in the greatest force production. We hypothesized that administration of 25 nM DEX during the entire fabrication process was toxic to the cells and that administration of DEX at precise time points during myogenesis would result in SMU with a more advanced structure and function. Thus, we fabricated SMU with 25 nM DEX administered at early proliferation (days 0-4), late proliferation (days 3-5), and early differentiation (days 5-7) stages of myogenesis and compared them to SMU treated with 10 nM DEX (days 0-16). Cell proliferation was measured with a BrdU assay (day 4) and myogenesis was examined by immunostaining for MyoD (day 4), myogenin (day 7), and α-actinin (day 11). Following SMU formation, isometric tetanic force production was measured. An analysis of cell proliferation indicated that 25 nM DEX administered at early proliferation (days 0-4) provided 21.5% greater myogenic proliferation than 10 nM DEX (days 0-4). In addition, 25 nM DEX administered at early differentiation (days 5-7) showed the highest density of myogenin-positive cells, demonstrating the greatest improvement in differentiation of myoblasts. However, the most advanced sarcomeric structure and the highest force production were exhibited with sustained administration of 10 nM DEX (days 0-16). In conclusion, alteration of the timing of 25 nM DEX administration did not enhance the structure or function of our SMU. SMU were optimally fabricated with sustained administration of 10 nM DEX.

A Transgenic tdTomato Rat for Cell Migration and Tissue Engineering Applications.

The growing deficit in suitable tissues for patients awaiting organ transplants demonstrates the clinical need for engineered tissues as alternative graft sources. Demonstrating safety and efficacy by tracking the migration and fate of implanted cells is a key consideration required for approval of promising engineered tissues. Cells from transgenic animals that express green fluorescent protein (GFP) are commonly used for this purpose. However, GFP can create difficulties in practice due to high levels of green autofluorescence in many musculoskeletal tissues. Tandem-dimer tomato (tdTomato) is a stable, robust red fluorescent protein that is nearly threefold brighter than GFP. Our objective was to create a line of transgenic rats that ubiquitously express tdTomato in all cells, driven by the human ubiquitin C promoter. We sought to determine the rats' utility in tissue engineering applications by fabricating engineered skeletal muscle units (SMUs) from isolated muscle-derived tdTomato cells. These tdTomato SMUs were implanted into a volumetric muscle loss (VML) defect of the tibialis anterior muscle in a rat ubiquitously expressing GFP. We also evaluated a novel method for modularly combining individual SMUs to create a larger engineered tissue. Following a recovery period of 28 days, we found that implantation of the modular SMU led to a significant decrease in the size of the remaining VML deficit. Histological analysis of explanted tissues demonstrated both tdTomato and GFP expression in the repair site, indicating involvement of both implanted and host cells in the regeneration process. These results demonstrate the successful generation of a tdTomato transgenic rat, and the use of these rats in tissue engineering and cell migration applications. Furthermore, this study successfully validated a method for scaling engineered tissues to larger sizes, a factor that will be important for repairing volumetric injuries in more clinically relevant models.

Tissue-engineered tendon constructs for rotator cuff repair in sheep.

Current rotator cuff repair commonly involves the use of single or double row suture techniques, and despite successful outcomes, failure rates continue to range from 20 to 95%. Failure to regenerate native biomechanical properties at the enthesis is thought to contribute to failure rates. Thus, the need for technologies that improve structural healing of the enthesis after rotator cuff repair is imperative. To address this issue, our lab has previously demonstrated enthesis regeneration using a tissue-engineered graft approach in a sheep anterior cruciate ligament (ACL) repair model. We hypothesized that our tissue-engineered graft designed for ACL repair also will be effective in rotator cuff repair. The goal of this study was to test the efficacy of our Engineered Tissue Graft for Rotator Cuff (ETG-RC) in a rotator cuff tear model in sheep and compare this novel graft technology to the commonly used double row suture repair technique. Following a 6-month recovery, the grafted and contralateral shoulders were removed, imaged using X-ray, and tested biomechanically. Additionally, the infraspinatus muscle, myotendinous junction, enthesis, and humeral head were preserved for histological analysis of muscle, tendon, and enthesis structure. Our results showed that our ETC-RCs reached 31% of the native tendon tangent modulus, which was a modest, non-significant, 11% increase over that of the suture-only repairs. However, the histological analysis showed the regeneration of a native-like enthesis in the ETG-RC-repaired animals. This advanced structural healing may improve over longer times and may diminish recurrence rates of rotator cuff tears and lead to better clinical outcomes. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:289-299, 2018.

In vivo structural and cellular remodeling of engineered bone-ligament-bone constructs used for anterior cruciate ligament reconstruction in sheep.

Anterior cruciate ligament (ACL) ruptures rank among the most prevalent and costly sports-related injuries. Current tendon grafts used for ACL reconstruction are limited by suboptimal biomechanical properties. We have addressed these issues by engineering multiphasic bone-ligament-bone (BLB) constructs that develop structural and mechanical properties similar to native ACL. The purpose of this study was to examine the acute remodeling process that occurs as the BLB grafts advance toward the adult ligament phenotype in vivo. Thus, we implanted BLB constructs fabricated from male cells into female host sheep and allowed 3, 7, 14, or 28 days (n = 4 at each time point) for recovery. To address whether or not graft-derived cells were even necessary, a subset of BLB constructs (n = 3) were acellularized, implanted, and allowed 28 days for recovery. At each recovery time point, the following histological analyses were performed: picrosirius red staining to assess collagen alignment and immunohistochemistry to assess both graft development and host immune response. Polymerase chain reaction (PCR) analysis, performed on every explanted BLB, was used to detect the presence of graft-derived male cells remaining in the constructs and/or migration into surrounding host tissue. The analysis of the PCR and histology samples revealed a rapid migration of host-derived macrophages and neutrophils into the graft at 3 days, followed by increased collagen density and alignment, vascularization, innervation, and near complete repopulation of the graft with host cells within 28 days. This study provides a greater understanding of the processes of ligament regeneration in our BLB constructs as they remodel toward the adult ligament phenotype.