A microscopic Kondo lattice model for the heavy fermion antiferromagnet CeIn3.

Electrons at the border of localization generate exotic states of matter across all classes of strongly correlated electron materials and many other quantum materials with emergent functionality. Heavy electron metals are a model example, in which magnetic interactions arise from the opposing limits of localized and itinerant electrons. This remarkable duality is intimately related to the emergence of a plethora of novel quantum matter states such as unconventional superconductivity, electronic-nematic states, hidden order and most recently topological states of matter such as topological Kondo insulators and Kondo semimetals and putative chiral superconductors. The outstanding challenge is that the archetypal Kondo lattice model that captures the underlying electronic dichotomy is notoriously difficult to solve for real materials. Here we show, using the prototypical strongly-correlated antiferromagnet CeIn3, that a multi-orbital periodic Anderson model embedded with input from ab initio bandstructure calculations can be reduced to a simple Kondo-Heisenberg model, which captures the magnetic interactions quantitatively. We validate this tractable Hamiltonian via high-resolution neutron spectroscopy that reproduces accurately the magnetic soft modes in CeIn3, which are believed to mediate unconventional superconductivity. Our study paves the way for a quantitative understanding of metallic quantum states such as unconventional superconductivity.

Quantitative evaluation of the progressive wear of powered interproximal reduction systems after repeated use : An in vitro study.

PURPOSE: To evaluate the residual surface roughness of 5 common diamond-coated interproximal reduction (IPR) systems after consecutive in vitro applications in relation to system, diamond grain size, and instrument thickness. METHODS: IPR was performed on 80 extracted human incisors using motor-driven strips and discs under predefined conditions. The IPR auxiliaries were applied at 5 consecutive sessions of 20 s on intact interproximal surfaces, and the surface profile (Ra, Rz, Rmax) was analyzed at baseline and after each session with an optical profilometer. RESULTS: No overall significant difference in the roughness values was found between systems (P = 0.07 for Ra, P = 0.33 for Rz, and P = 0.48 for Rmax). There was a significant average decrease of Ra, Rz, and Rmax for all systems for every unit increase in time by -0.171 µm (P < 0.001), -3.297 (P ≤ 0.001), and -2.788 µm (P = 0.001), respectively. Ra, Rz, and Rmax values increased significantly, i.e., by 0.194 µm (P = 0.003), 5.890 µm (P = 0.001), and 5.319 µm (P = 0.010) as instrument thickness increased by one unit. No significant reductions in Ra, Rz, and Rmax were observed across grain sizes (-0.008 µm [P > 0.05], -0.244 µm [P > 0.05], and -0.179 µm [P > 0.05], respectively). There was no evidence of interaction between system and time as the P values for Ra, Rz, and Rmax were 0.88, 0.51, and 0.70, respectively. CONCLUSIONS: All IPR materials presented significant gradual decrease of surface roughness after repeated applications. There were no significant roughness changes among auxiliaries of different grain sizes. Thinner auxiliaries showed significantly more roughness reduction, possibly requiring more frequent replacement than thick auxiliaries in clinical practice.

Marginal Gap Formation in Approximal "Bulk Fill" Resin Composite Restorations After Artificial Ageing.

The aim of this in vitro study was to investigate the marginal gap formation of a packable "regular" resin composite (Filtek Supreme XTE [3M ESPE]) and two flowable "bulk fill" resin composites (Filtek Bulk Fill [3M ESPE] and SDR [DENTSPLY DeTrey]) along the approximal margins of Class II restorations. In each of 39 extracted human molars (n=13 per resin composite), mesial and distal Class II cavities were prepared, placing the gingival margins below the cemento-enamel junction. The cavities were restored with the adhesive system OptiBond FL (Kerr) and one of the three resin composites. After restoration, each molar was cut in half in the oro-vestibular direction between the two restorations, resulting in two specimens per molar. Polyvinylsiloxane impressions were taken and "baseline" replicas were produced. The specimens were then divided into two groups: At the beginning of each month over the course of six months' tap water storage (37°C), one specimen per molar was subjected to mechanical toothbrushing, whereas the other was subjected to thermocycling. After artificial ageing, "final" replicas were produced. Baseline and final replicas were examined under the scanning electron microscope (SEM), and the SEM micrographs were used to determine the percentage of marginal gap formation in enamel or dentin. Paramarginal gaps were registered. The percentages of marginal gap formation were statistically analyzed with a nonparametric analysis of variance followed by Wilcoxon-Mann-Whitney tests and Wilcoxon signed rank tests, and all p-values were corrected with the Bonferroni-Holm adjustment for multiple testing (significance level: α=0.05). Paramarginal gaps were analyzed descriptively. In enamel, significantly lower marginal gap formation was found for Filtek Supreme XTE compared to Filtek Bulk Fill ( p=0.0052) and SDR ( p=0.0289), with no significant difference between Filtek Bulk Fill and SDR ( p=0.4072). In dentin, significantly lower marginal gap formation was found for SDR compared to Filtek Supreme XTE ( p<0.0001) and Filtek Bulk Fill ( p=0.0015), with no significant difference between Filtek Supreme XTE and Filtek Bulk Fill ( p=0.4919). Marginal gap formation in dentin was significantly lower than in enamel ( p<0.0001). The percentage of restorations with paramarginal gaps varied between 0% and 85%, and for all three resin composites the percentages were markedly higher after artificial ageing. The results from this study suggest that in terms of marginal gap formation in enamel, packable resin composites may be superior to flowable "bulk fill" resin composites, while in dentin some flowable "bulk fill" resin composites may be superior to packable ones.

Full-scale evaluation of methane production under oxic conditions in a mesotrophic lake.

Oxic lake surface waters are frequently oversaturated with methane (CH4). The contribution to the global CH4 cycle is significant, thus leading to an increasing number of studies and stimulating debates. Here we show, using a mass balance, on a temperate, mesotrophic lake, that ~90% of CH4 emissions to the atmosphere is due to CH4 produced within the oxic surface mixed layer (SML) during the stratified period, while the often observed CH4 maximum at the thermocline represents only a physically driven accumulation. Negligible surface CH4 oxidation suggests that the produced 110 ± 60 nmol CH4 L-1 d-1 efficiently escapes to the atmosphere. Stable carbon isotope ratios indicate that CH4 in the SML is distinct from sedimentary CH4 production, suggesting alternative pathways and precursors. Our approach reveals CH4 production in the epilimnion that is currently overlooked, and that research on possible mechanisms behind the methane paradox should additionally focus on the lake surface layer.

Invasive floating macrophytes reduce greenhouse gas emissions from a small tropical lake.

Floating macrophytes, including water hyacinth (Eichhornia crassipes), are dominant invasive organisms in tropical aquatic systems, and they may play an important role in modifying the gas exchange between water and the atmosphere. However, these systems are underrepresented in global datasets of greenhouse gas (GHG) emissions. This study investigated the carbon (C) turnover and GHG emissions from a small (0.6 km(2)) water-harvesting lake in South India and analysed the effect of floating macrophytes on these emissions. We measured carbon dioxide (CO2) and methane (CH4) emissions with gas chambers in the field as well as water C mineralization rates and physicochemical variables in both the open water and in water within stands of water hyacinths. The CO2 and CH4 emissions from areas covered by water hyacinths were reduced by 57% compared with that of open water. However, the C mineralization rates were not significantly different in the water between the two areas. We conclude that the increased invasion of water hyacinths and other floating macrophytes has the potential to change GHG emissions, a process that might be relevant in regional C budgets.

Enamel Surface Changes After Exposure to Bleaching Gels Containing Carbamide Peroxide or Hydrogen Peroxide.

OBJECTIVE: This study evaluated the differences in enamel color change, surface hardness, elastic modulus, and surface roughness between treatments with four bleaching gels containing carbamide peroxide (two at 10% and one each at 35%, and 45%) and two bleaching gels containing hydrogen peroxide (two at 40%). METHODS: Enamel specimens were bleached and color changes were measured. Color change was calculated using either ΔE or the Bleaching Index (BI). Then, surface hardness, elastic modulus, and surface roughness of the enamel specimens were evaluated. All measurements were performed at baseline and directly after the first bleaching treatment for all carbamide peroxide- and hydrogen peroxide-containing bleaching gels. In addition, final measurements were made 24 hours after each of a total of 10 bleaching treatments for carbamide peroxide bleaching gels, and 1 week after each of a total of three bleaching treatments for hydrogen peroxide bleaching gels. RESULTS: After the last bleaching treatment, respective ΔE scores were 17.6 and 8.2 for the two 10% carbamide peroxide gels, 12.9 and 5.6 for the 45% and 35% carbamide peroxide gels, and 9.6 and 13.9 for the two 40% hydrogen peroxide gels. The respective BI scores were -2.0 and -2.0 for the two 10% carbamide peroxide gels, -3.5 and -1.5 for the 45% and 35% carbamide peroxide gels, and -2.0 and -3.0 for the two 40% hydrogen peroxide gels. Each bleaching gel treatment resulted in significant whitening; however, no significant difference was found among the gels after the last bleaching. Whitening occurred within the first bleaching treatments and did not increase significantly during the remaining treatments. Surface hardness significantly decreased after the last bleaching treatment, when 10% carbamide peroxide was used. Furthermore, significant changes in the elastic modulus or surface roughness occurred only after treatment with 10% carbamide peroxide. CONCLUSION: All six bleaching gels effectively bleached the enamel specimens independent of their concentration of peroxide. Gels with low peroxide concentration and longer contact time negatively affected the enamel surface.

Retention of Root Canal Posts: Effect of Cement Film Thickness, Luting Cement, and Post Pretreatment.

The aim of this study was to investigate the effect of the cement film thickness of a zinc phosphate or a resin cement on retention of untreated and pretreated root canal posts. Prefabricated zirconia posts (CosmoPost: 1.4 mm) and two types of luting cements (a zinc phosphate cement [DeTrey Zinc] and a self-etch adhesive resin cement [Panavia F2.0]) were used. After removal of the crowns of 360 extracted premolars, canines, or incisors, the root canals were prepared with a parallel-sided drill system to three different final diameters. Half the posts did not receive any pretreatment. The other half received tribochemical silicate coating according to the manufacturer's instructions. Posts were then luted in the prepared root canals (n=30 per group). Following water storage at 37°C for seven days, retention of the posts was determined by the pull-out method. Irrespective of the luting cement, pretreatment with tribochemical silicate coating significantly increased retention of the posts. Increased cement film thickness resulted in decreased retention of untreated posts and of pretreated posts luted with zinc phosphate cement. Increased cement film thickness had no influence on retention of pretreated posts luted with resin cement. Thus, retention of the posts was influenced by the type of luting cement, by the cement film thickness, and by the post pretreatment.

Histopathological evidence of invasive gastric mucormycosis after transarterial chemoembolization and liver transplantation.

We describe a case of a 62-year-old diabetic woman with hepatocellular carcinoma due to chronic hepatitis B virus infection. Two weeks after orthotopic liver transplantation, endoscopy for massive upper gastrointestinal bleeding revealed a large necrotic area in the gastric fundus. The patient underwent emergency resection. Histopathologically, angioinvasive mold infection compatible with mucormycosis was diagnosed in a large area of necrosis, mimicking an atypically localized gastric ulcer. Foreign bodies originating from transarterial chemoembolization (TACE) performed 7 and 8 months earlier and 40 days before transplantation were identified in the submucosal tissue. The patient was treated with liposomal amphotericin B (LAB) for 5 weeks, followed by 7 weeks of posaconazole. Follow-up biopsies after 1 and 5 months confirmed successful treatment. Review of the radiological images of the TACE procedure showed that some of the TACE material had been diverted to the stomach via an accessory gastric branch originating from the left hepatic artery. TACE agents may be associated with chronic, refractory gastroduodenal ulcers. We hypothesize that the ischemic lesion was first colonized with presumed Mucorales mold and invasive growth was promoted by the posttransplantation immunosuppression. Careful exploration of extrahepatic collaterals during TACE may prevent this complication.

Influence of surface roughness on mechanical properties of two computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic materials.

The aim of this study was to evaluate the influence of surface roughness on surface hardness (Vickers; VHN), elastic modulus (EM), and flexural strength (FLS) of two computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic materials. One hundred sixty-two samples of VITABLOCS Mark II (VMII) and 162 samples of IPS Empress CAD (IPS) were ground according to six standardized protocols producing decreasing surface roughnesses (n=27/group): grinding with 1) silicon carbide (SiC) paper #80, 2) SiC paper #120, 3) SiC paper #220, 4) SiC paper #320, 5) SiC paper #500, and 6) SiC paper #1000. Surface roughness (Ra/Rz) was measured with a surface roughness meter, VHN and EM with a hardness indentation device, and FLS with a three-point bending test. To test for a correlation between surface roughness (Ra/Rz) and VHN, EM, or FLS, Spearman rank correlation coefficients were calculated. The decrease in surface roughness led to an increase in VHN from (VMII/IPS; medians) 263.7/256.5 VHN to 646.8/601.5 VHN, an increase in EM from 45.4/41.0 GPa to 66.8/58.4 GPa, and an increase in FLS from 49.5/44.3 MPa to 73.0/97.2 MPa. For both ceramic materials, Spearman rank correlation coefficients showed a strong negative correlation between surface roughness (Ra/Rz) and VHN or EM and a moderate negative correlation between Ra/Rz and FLS. In conclusion, a decrease in surface roughness generally improved the mechanical properties of the CAD/CAM ceramic materials tested. However, FLS was less influenced by surface roughness than expected.

Bonding of restorative materials to dentin with various luting agents.

The aim was to compare eight types of luting agents when used to bond six indirect, laboratory restorative materials to dentin. Cylinders of the six restorative materials (Esteticor Avenir [gold alloy], Tritan [titanium], NobelRondo [feldspathic porcelain], Finesse All-Ceramic [leucite-glass ceramic], Lava [zirconia], and Sinfony [resin composite]) were ground and air-abraded. Cylinders of feldspathic porcelain and glass ceramic were additionally etched with hydrofluoric acid and were silane-treated. The cylinders were luted to ground human dentin with eight luting agents (DeTrey Zinc [zinc phosphate cement], Fuji I [conventional glass ionomer cement], Fuji Plus [resin-modified glass ionomer cement], Variolink II [conventional etch-and-rinse resin cement], Panavia F2.0 and Multilink [self-etch resin cements], and RelyX Unicem Aplicap and Maxcem [self-adhesive resin cements]). After water storage at 37°C for one week, the shear bond strength of the specimens (n=8/group) was measured, and the fracture mode was stereomicroscopically examined. Bond strength data were analyzed with two-factorial analysis of variance (ANOVA) followed by Newman-Keuls' Multiple Range Test (α=0.05). Both the restorative material and the luting agent had a significant effect on bond strength, and significant interaction was noted between the two variables. Zinc phosphate cement and glass ionomer cements produced the lowest bond strengths, whereas the highest bond strengths were found with the two self-etch and one of the self-adhesive resin cements. Generally, the fracture mode varied markedly with the restorative material. The luting agents had a bigger influence on bond strength between restorative materials and dentin than was seen with the restorative material.

Operator variability using different polishing methods and surface geometry of a nanohybrid composite.

This study evaluated the operator variability of different finishing and polishing techniques. After placing 120 composite restorations (Tetric EvoCeram) in plexiglassmolds, the surface of the specimens was roughened in a standardized manner. Twelve operators with different experience levels polished the specimens using the following finishing/polishing procedures: method 1 (40 µm diamond [40D], 15 µm diamond [15D], 42 µm silicon carbide polisher [42S], 6 µm silicon carbide polisher [6S] and Occlubrush [O]); method 2 (40D, 42S, 6S and O); method 3 (40D, 42S, 6S and PoGo); method 4 (40D, 42S and PoGo) and method 5 (40D, 42S and O). The mean surface roughness (Ra) was measured with a profilometer. Differences between the methods were analyzed with non-parametric ANOVA and pairwise Wilcoxon signed rank tests (α=0.05). All the restorations were qualitatively assessed using SEM. Methods 3 and 4 showed the best polishing results and method 5 demonstrated the poorest. Method 5 was also most dependent on the skills of the operator. Except for method 5, all of the tested procedures reached a clinically acceptable surface polish of Ra≤0.2 µm. Polishing procedures can be simplified without increasing variability between operators and without jeopardizing polishing results.

A screening test of auditory comprehension for individuals with severe physical disability (PACST).

Tests of auditory comprehension are frequently unsuitable for patients with physically disabling conditions as they require abilities such as good vision or physical manipulation of test materials. A suitable test is required to assess patients who can only indicate 'yes' or 'no'. This has implications for enabling patients to make decisions about their care. A test consisting of 60 Yes-No questions was developed from a larger set tested on normals. A clinical trial was completed and the test found to be a useful tool. It allocates patients to three groups: normal, impaired and chance performance.

Assessing auditory comprehension in the context of severe physical disability: the PACST.

Existing tests of auditory comprehension are frequently unsuitable for patients with physically disabling conditions as tests require skills such as physical manipulation of materials. A suitable test is required to assess the reliability and validity of responses in patients who can only indicate 'yes' and 'no'. This has implications for enabling patients to participate, for example, in decision making over their care. In the construction of the Putney Auditory Comprehension Screening Test (PACST) 200 normal participants were tested with 258 yes/no questions. From their results a test consisting of 60 unambiguous questions, varying in difficulty, type, syntactic complexity and length were selected. A clinical trial was completed with 112 patients from the Royal Hospital for Neuro-disability. The 60 item test was found to be reliable and valid. Results were also compared with independent ratings by ward managers and speech and language therapists. Effects of demographic variables were as expected. A 60 question test was developed which was shown by the clinical trial to be a useful tool. Questions vary in difficulty, but not enough to establish a difficulty gradient. On the basis of performance on the test, patients can be allocated to three groups: normal, impaired, and chance performance.

Inhibition and reversal of endotoxin-, aggregated IgG- and paf-induced hypotension in the rat by SRI 63-072, a paf receptor antagonist.

Platelet activating factor (paf) given intravenously produces systemic hypotension in the rat. Similar effects can be induced using endotoxin or heat-aggregated IgG challenges, which are thought to involve endogenous paf release. Extending this concept, we have examined the ability of the paf antagonist SRI 63-072 to inhibit or reverse systemic hypotension induced with paf, heat-aggregated IgG or endotoxin 0111-B4 in rats. At 100 ng kg-1 paf, there occurred a 38.6 +/- 5.1% decrease in carotid mean arterial pressure (MAP) followed by a 3.2 +/- 0.7 min recovery period (RP) to return to normal pressure values. The ED50 of SRI 63-072 was 0.16 mg kg-1 i.v. (MAP) and 0.25 mg kg-1 (RP) when given 1-5 min before the paf challenge. Endotoxin (15 mg kg-1 i.v.) produced a hypotensive response (54 +/- 8% decrease in MAP) and a corresponding 80% decrease in mesenteric artery blood flow. When given 2-8 min after endotoxin, 1.0 mg kg-1 i.v. SRI 63-072 totally restored blood pressure and artery blood flow. SRI 63-072 similarly reversed heat-aggregated IgG (10 mg kg-1) induced reduction of MAP, with an ED50 of 0.05 mg kg-1 i.v. The observations that SRI 63-072 can inhibit or reverse systemic vascular effects produced from paf and other provocators of endogenous paf release strongly implicates paf as a common final mediator of hypotension and shock. As SRI 63-072 is a competitive receptor antagonist, the hypotensive effects of these provocators appear to be mediated by vascular receptors for paf.