Use of cerrado plants as an alternative in the control of bacterial contamination in the alcoholic fermentation process.

Bacterial contamination causes irreparable losses in the performance of alcoholic fermentation. Antibiotics are used to control these microorganisms, but they generate residues and cause microbial resistance. Today the only commercial product used by the mills is hops, but it is very expensive. As an alternative, the objective of this work was to evaluate the feasibility of using extracts from plants grown in the Cerrado for antimicrobial control during an alcoholic fermentation to replace antibiotics. Hydraethanolic extracts of leaves and essential oil of the following species were tested: Schinus terebinthifolius Raddi, Serjania erecta, Serjania marginata, Campomanesia adamantium and Syzygium cumini. Only the extract of Serjania marginata did not show any activity against the bacterium Bacillus sp. Both the essential oils as well as the hydroalcoholic extracts of S. terebinthifolius and C. adamantium and the extract of S. erecta showed antibacterial activity without harming the yeast, with potential to replace the hops.

Lip print evidence: Poland as the Last Bastion of Practical Cheiloscopy.

Cheiloscopic examinations have long been conducted, and many scientists have reported the usefulness of cheiloscopy for personal identification with a characteristic and individual pattern of furrows on the vermilion lip. For almost 40 years, research conducted in Poland has determined the patterns of these furrows and the separation and development of their individual features. This was the basis for forming expert opinions and presenting them in court as evidence. In Poland, cheiloscopic expertise is performed and the results of precise procedures that are accredited and assessed serve as evidence. Although the legal system in Poland (continental system) is completely different from the American system, cheiloscopic expertise was also assessed in detail according to the American standards of evidence. This narrative review presents the problem of cheiloscopic expertise as a scientific and practical issue and provides a brief historical overview of this field and the foundations of the Polish cheiloscopic identification method. We conclude that Poland has sufficient historical background and a robust development of cheiloscopy in the field on a scientific and legal basis; however, due to its reports being in the Polish language, its absence from the most relevant specialized literature, or simply a lack of cooperation between countries and experts, the country has unfairly been left out of the discussion. We believe that a new look at the Polish contribution to lip print identification is necessary to reinsert this topic into the current discussion of a new identification paradigm.

Cardiovascular biomarkers in sickle cell disease− clinical and echocardiographic correlations in a cross-sectional study with 126 patients

INTRODUCTION: Cardiac biomarkers can be useful in understanding the systemic and heart manifestations of sickle cell disease (SCD). Biomarkers reflect various aspects of heart disease (remodeling, injury and myocardial strain), with discriminatory potential for non-cardiac complications. Patients and METHODS: SCD patients (SS/Sß0) in steady state, were studied, correlating clinical manifestations and echo parameters (myocardial work - MW and speckle tracking), pre-MSCD severity score (integrating clinical and echo data), and cardiac biomarkers (high-sensitivity troponins ­ hs-cTn I and T, NT-pro-BNP, ST2s, and galectin-3 - GAL3). Quantitative characteristics were analyzed by Spearman tests, and qualitative characteristics by Mann-Whitney test. Hemolytic Index (HI) was calculated through Principal Component Analysis. Generalized linear Poisson models were generated for hs-cTn, and γ-distribution models were employed for other markers, with final models selected through the Stepwise Backward method. RESULTS: We studied 126 patients (mean age 37.2 ± 11.6 years), 42.1% male, and 80.2% SS. 47% were on hydroxyurea treatment and 30.2% on a chronic transfusion. NT-pro-BNP was elevated in 44% (> 160 ng/mL in 37%), correlated with female gender (p < 0.001), severity score (p = 0.001), uric acid (p = 0.017), HI (p < 0.001), Global Work Index (GWI) (p = 0.003), left atrial (LA) stiffness (p = 0.003), and ventricular mass (VM) (p = 0.02). ST2s were elevated in 11% and correlated with male gender (p > 0.001), HI (p > 0.001), cardiac index (p = 0.015), and LA strain reservoir function (p = 0.034). GAL3 was elevated in 42.8%, correlated with E/e'ratio (p = 0.006), uric acid (p = 0.005), and absence of chronic pain (p = 0.046). hs-cTn correlated with age (c-TnI p = 0.004; c-TnT p > 0.001), HI (p > 0.001), diastolic dysfunction (p > 0.001), left VM (p < 0.001), increased GWI (p < 0.001), and reduced MW efficiency (p < 0.001). hs-cTn I also correlated with increased LA reservoir function (p < 0.001) with reduced conduit function (p < 0.001). hs-cTn T correlated with uric acid (p = 0.001), and in univariate analysis was also correlated with severity score. The values of both hs-cTn correlated with increased GWI (p < 0.001) and reduced MW efficiency (p < 0.001). DISCUSSION: The biomarkers demonstrated various clinical and pathophysiological aspects of SCD. NT-pro-BNP is a routine marker with correlations similar to literature, except for higher values in females, also observed in non-SCD population. ST2 and GAL3 had limited correlations with echo findings, likely due to their production in extracardiac tissues affected by inflammation/vaso-occlusion. Both were linked to the HI, and the decrease in GAL3 in chronic pain can be attributed to chronic opioid use causing reduced synthesis of it. The elevation of hs-cTn was expected due to the analytical characteristics of high-sensitivity assays, but low in terms of the extent of heart involvement. hs-cTnT was more associated with general severity, like in the general population, where it is associated with overall mortality, while hs-cTnI is more connected to heart disease. MW in SCD is optimized to the maximum with a very low Global Work Wasted, and hs-cTn elevation is associated with reduced MW efficiency, indicating mecano-energetic uncoupling and subtle systolic dysfunction. CONCLUSION: Our study demonstrates that cardiac biomarkers can be used for clinical and pathophysiological evaluation, with NT-pro-BNP confirming its role in clinical stratification. ST2s and GAL3 may reveal new pathophysiological pathways in hemolysis and the interaction of opioids and chronic pain. Troponins are promising as prospective tool and may unveil ischemic damage resulting from myocardial mecano-energetic dissociation.

UBC Neck C4-C5: An Anatomically and Biomechanically Accurate Surrogate C4-C5 Functional Spinal Unit.

Millions of people worldwide suffer from spinal cord injuries (SCIs) and traumatic brain injuries (TBIs) annually. Safety devices meant to protect against SCIs and TBIs, such as helmets, airbags, seat belts, and compliant floors are often evaluated with the use of anthropometric test devices (ATD s); however, there are currently no neck surrogates appropriate for the multiplane loading that often occurs in real-world scenarios leading to injury. As such, our objective in this study was to design and create an anatomically correct functional spinal unit (FSU) that produces a repeatable and biofidelic response to lateral bending, axial rotation, and quasistatic flexion-extension motion. This is a critical step in developing a biofidelic omnidirectional surrogate that can be used in future evaluations of safety devices in transportation, occupational, and sports settings. To create a biofidelic C4-C5 FSU, anatomically accurate C4 and C5 vertebrae were designed and manufactured using a 3D printer using geometry derived from the CT scans of a healthy 31-year-old male. Potential intervertebral disc and ligament surrogate materials were tested in compression and tension, respectively, to select representative materials for the surrogate intervertebral disc and cervical ligaments. The C4-C5 FSU was assembled and tested repeatedly in quasistatic flexion-extension, axial rotation, and lateral bending. Kinematic results were captured and compared to previously published cadaver data. The surrogate disc showed excellent Biofidelity (ISO/TR 9790) in compression, and the surrogate ligaments were within 25 N/mm of linear cadaveric stiffness ranges. The assembled FSU named UBC Neck C4-C5 showed good biofidelity under quasistatic axial rotation, lateral bending, flexion-extension, and coupled motion (ISO/TR 9790). However, the instantaneous centre of rotation was not similar to ex vivo or in vivo published studies. The UBC Neck C4-C5 FSU resulted in good biofidelity ratings and will inform future construction of a full surrogate neck to be used in the testing of head and neck safety equipment.

Folliculogenesis-related genes are differently expressed in secondary and tertiary ovarian follicles.

The relative mRNA abundance of 10 genes associated with folliculogenesis was compared between late preantral (secondary) and early antral (tertiary) ovarian follicles in goats. In total, 100 follicles in each category were mechanically isolated. The relative transcript abundance of the mRNAs were determined by qPCR. Data were analyzed using unpaired Student's t-test. Of the 10 tested genes, ABLIM mRNA was not detected in either follicle category, six genes (SLIT3, TYMS, GTPBP1, AKR1C4, PIK3R6, and MAOB) were upregulated in secondary follicles compared with tertiary follicles, and three genes (ARHGEF12, CLEC6A, and CYTL1) showed similar mRNA abundances in both secondary and tertiary follicles. In conclusion, SLIT3, GTPBP1, AKR1C4, and PIK3R6 mRNA abundance was upregulated in secondary follicles (preantral phase) compared with in tertiary follicles (antral phase) in goats.

Brachytherapy treatment verification using gamma radiation from the internal treatment source combined with an imaging panel-a phantom study.

Brachytherapy has an excellent clinical outcome for different treatment sites. However,in vivotreatment verification is not performed in the majority of hospitals due to the lack of proper monitoring systems. This study investigates the use of an imaging panel (IP) and the photons emitted by a high dose rate (HDR)192Ir source to track source motion and obtain some information related to the patient anatomy. The feasibility of this approach was studied by monitoring the treatment delivery to a 3D printed phantom that mimicks a prostate patient. A 3D printed phantom was designed with a template for needle insertion, a cavity ('rectum') to insert an ultrasound probe, and lateral cavities used to place tissue-equivalent materials. CT images were acquired to create HDR192Ir treatment plans with a range of dwell times, interdwell distances and needle arrangements. Treatment delivery was verified with an IP placed at several positions around the phantom using radiopaque markers on the outer surface to register acquired IP images with the planning CT. All dwell positions were identified using acquisition times ≤0.11 s (frame rates ≥ 9 fps). Interdwell distances and dwell positions (in relation to the IP) were verified with accuracy better than 0.1 cm. Radiopaque markers were visible in the acquired images and could be used for registration with CT images. Uncertainties for image registration (IP and planning CT) between 0.1 and 0.4 cm. The IP is sensitive to tissue-mimicking insert composition and showed phantom boundaries that could be used to improve treatment verification. The IP provided sufficient time and spatial resolution for real-time source tracking and allows for the registration of the planning CT and IP images. The results obtained in this study indicate that several treatment errors could be detected including swapped catheters, incorrect dwell times and dwell positions.

Antimicrobial Photodynamic Therapy (aPDT) for decontamination of high-speed handpieces: A comparative study.

BACKGROUND: Cross-transmission is a major concern in dental offices. Various disinfection methods have been frequently used to reduce its incidence. Standard procedures include decontamination and sterilization. Traditional decontamination methods include: Alcohol 70 % and chlorhexidine digluconate, however, antimicrobial photodynamic therapy (aPDT) could be added as an option. The objective was to evaluate the effectiveness of aPDT on decontamination of high-speed handpieces, contaminated by Staphylococcus aureus (SA) and Escherichia coli (EC), and compare it to autoclave sterilized and to conventional chemical decontamination methods. METHODS: Sterilized, SA and EC contaminated high-speed handpieces were divided in 7 groups: G1- sterilized in an autoclave. G2- contaminated untreated control. G3- contaminated and decontaminated using Alcohol 70 %. G4- contaminated and decontaminated using chlorhexidine digluconate 2%. G5- contaminated and laser treated. G6- contaminated and photosensitizer treated. G7- contaminated and photodynamic therapy. RESULTS: The groups G3, G4, G7 did not show bacterial growth, G5 and G6 showed bacterial growth similar to G2. The study did not find SA or EC sensible to laser irradiation only, differently from some authors and did not consider biofilm in our experiments. CONCLUSION: Our experiment showed that, laser and photosensitizer isolated were not effective to inhibit Staphylococcus aureus (SA) and Escherichia coli (EC) growth, but when associated in aPDT technique, can be compared to chemical disinfection agents that are traditionally used and effective against this pathogen.

Discriminating sarcopenia in overweight/obese male patients with heart failure: the influence of body mass index.

AIMS: The definition of sarcopenia based on appendicular lean mass/height (2) (ALM/height (2) ) is often used, although it can underestimate the prevalence of sarcopenia in overweight/obese patients with heart failure. Therefore, new methods have been proposed to overcome this limitation. We aimed to evaluate the prevalence of sarcopenia by three methods and compare body composition in this population. METHODS AND RESULTS: We enrolled 168 male patients with heart failure (left ventricular ejection fraction <40%). Sixty-six patients (39.3%) were identified with sarcopenia by at least one method. The lower 20th percentile defined as the cut-off point for sarcopenia was 7.03 kg/m2 , -2.32 and 0.76 for Baumgartner's (20.8%), Newman's (21.4%), and Studenski's methods (21.4%), respectively. Patients with body mass index (BMI) <25 kg/m2 were more likely to be identified by Baumgartner's than Studenski's method (P < 0.001). However, in patients with BMI ≥ 25 kg/m2 , Studenski's and Newman's methods were more likely to detect sarcopenia than Baumgartner's method (both P < 0.005). Patients were further divided into three subgroups: (i) patients classified in all indexes (n = 8), (ii) patients classified in Baumgartner's (sarcopenic; n = 27), and (iii) patients classified in both Newman's and Studenski's methods (sarcopenic obesity; n = 31). Comparing body composition among groups, all sarcopenic groups presented lower total lean mass compared with non-sarcopenic patients, whereas sarcopenic obese patients had higher total lean mass than lean sarcopenic patients. CONCLUSIONS: Our results demonstrate that the prevalence of sarcopenia in overweight/obese patients is similar to lean sarcopenic patients when other methods are considered. In patients with higher BMI, Studenski's method seems to be more feasible to detect sarcopenia.

Reliability, reproducibility and validity of the conventional buccolingual and mesiodistal measurements on 3D dental digital models obtained from intra-oral 3D scanner.

OBJECTIVE: The aims of this study were to assess the reliability, reproducibility and validity of mesiodistal and buccolingual measurements comparing these measurements collected using an electronic hand-held digital calliper, on dry dentitions and on dental casts, with measurements obtained from 3D digital models created using a portable intra-oral scanner. DESIGN: The mesiodistal and buccolingual diameter of the crown of 1304 teeth were measured on dry dentitions and on dental casts, and secondly on 3D digital models created using an intra-oral 3D scanner. Reliability, reproducibility and validity were evaluated using the intraclass correlation coefficient (ICC) and the Bland-Altman graphic method. RESULTS: The results of the intraclass correlation coefficient expressed an excellent degree of agreement in the intra- and inter-observer error analysis, as well as in the comparison of the mesiodistal and buccolingual dimensions taken with the calliper and those taken in digital 3D models. The results of the Bland-Altman method showed that the greatest differences were found in the mesiodistal diameter of the molars and in the buccolingual diameter of the upper premolars. CONCLUSIONS: Mesiodistal and buccolingual measurements obtained from digital 3D models are suitable for recording dentitions for forensic purposes.

A comparison study between single- and dual-energy CT density extraction methods for neurological proton monte carlo treatment planning.

Monte Carlo proton dose calculations requires mass densities calculated from the patient CT image. This work investigates the impact of different single-energy CT (SECT) and dual-energy CT (DECT) to density conversion methods in proton dose distributions for brain tumours.Material and methods: Head CT scans for four patients were acquired in SECT and DECT acquisition modes. Commercial software was used to reconstruct DirectDensity™ images in Relative Electron Densities (RED, [Formula: see text]) and to obtain DECT-based pseudo-monoenergetic images (PMI). PMI and SECT images were converted to RED using piecewise linear interpolations calibrated on a head-sized phantom, these fits were referred to as "PMI2RED" and "CT2RED". Two DECT-based calibration methods ("Hünemohr-15it" and "Saito-15it") were also investigated. [Formula: see text] images were converted to mass-densities ([Formula: see text]) to investigate [Formula: see text]differences and one representative patient case was used to make a proton treatment plan. Using CT2RED as reference method, dose distribution differences in the target and in five organs-at-risk (OARs) were quantified.Results: In the phantom study, Saito-15it and Hünemohr-15it produced the lowest [Formula: see text]root-mean-square error (0.7%) and DirectDensity™ the highest error (2.7%). The proton plan evaluated in the Saito-15it and Hünemohr-15it datasets showed the largest relative differences compared to initial CT2RED plan down to -6% of the prescribed dose. Compared to CT2RED, average range differences were calculated: -0.1 ± 0.3 mm for PMI2RED; -0.8 ± 0.4 mm for Hünemohr-15it, and -1.2 ± 0.4 mm for Saito-15it.Conclusion: Given the wide choice of available conversion methods, studies investigating the density accuracy for proton dose calculations are necessary. However, there is still a gap between performing accuracy studies in reference [Formula: see text]phantoms and applying these methods in human CT images. For this treatment case, the PMI2RED method was equivalent to the conventional CT2RED method in terms of dose distribution, CTV coverage and OAR sparing, whereas Hünemohr-15it and Saito-15it presented the largest differences.

Morphometric analysis of bite mark patterns caused by domestic dogs ( Canis lupus familiaris ) using dental wax registers / Análisis de patrones de huellas de mordedura producidos por perros domésticos ( Canis lupus familiaris ) utilizando registros en cera dental

Dog bites are a known public health problem involving physical, mental and emotional traumas. From a forensic point of view, it has been stated that their morphological characters, and the intercanine and interincisive measurements, could allow a taxonomic and specific identification of the implicated animal. The aim of this study was to differentiate and identify the biological profile of a potential aggressor dog by analysing eight morphometric bite patterns belonging to three different dog breeds. The data obtained were analyzed following three categories: a) breeds; b) sexes among breeds; and c) sex within breed. Significant differences were detected among the variables (p≤ 0.05), but only the maximum maxillary intercanines width (MaxCW) allowed a breed differentiation. The other variables allowed a differentiation between two breeds or one breed over the others. The principal components analysis (PCA) allowed visualizing the degree of dispersion and relationship among the scores. It showed three well-defined and separated breed groups, and different degrees of dispersion within and among breeds. The most important variable for such a differentiation was MaxCW. When considering sex among breeds for males, it showed a statistically significant difference, but only the diastema located between the third left mandibular, incisive and the left mandibular canine (C-I-ManL) allowed breed differentiation. For females, only MaxCW allowed a differentiation among breeds. The multivariate analysis permitted with a 95 % confidence interval, a breed and sex differentiation. Besides, the PCA models allowed classifying, identifying, separating and graphically showing the relationship among the variables. This made it possible to differentiate between breeds and sexes. Due to the large range of dog breeds around the world, this multivariate analysis could also help determining the dog's weight and size, narrowing down towards an approximate number of offending dogs, focussing on a certain kind of dog breed, and pinpointing any suspect dog.

Las mordeduras de perros son un conocido problema de salud pública que involucra traumas físicos, mentales y emocionales. En la faz forense, se ha establecido que características morfológicas, así como las medidas intercanina e interincisiva, permitirían una identificación taxonómica y especifica del animal involucrado. El objetivo fue diferenciar e identificar el perfil biológico de un potencial perro agresor analizando ocho patrones morfológicos de mordeduras pertenecientes a tres diferentes razas caninas. Los datos fueron analizados considerando tres categorías: a) razas; b) sexo entre razas; y c) sexo en cada raza. Se observaron diferencias entre las variables (p≤0,05), pero sólo la distancia máxima entre caninos maxilares (MaxCW), permitió una diferenciación entre razas. Las otras variables permitieron una diferenciación entre dos razas o de una raza sobre las otras. El análisis de componentes principales (PCA) permitió visualizar el grado de dispersión y la relación entre las puntuaciones (dentro y entre razas). Se observaron tres grupos (razas) bien definidos y separados con diferentes grados de dispersión dentro y entre razas. La variable más importante para tal diferenciación fue la MaxCW. Al considerar sexo (machos) entre razas, se encontró diferencia estadísticamente significativa, pero sólo la medida del diastema localizado entre el tercer incisivo y canino izquierdo mandibulares (C-I-ManL) permitió la diferenciación entre razas. Para hembras, sólo la MaxCW permitió una diferenciación entre razas. El análisis multivariante permitió, con un intervalo de confianza del 95 %, diferenciar raza y sexo. El modelo PCA permitió además clasificar, identificar, separar y mostrar gráficamente la relación entre las variables. Esto posibilitó diferenciar entre razas y sexos. Debido a la gran variedad de razas de perros en el mundo, este análisis multivariado permitiría estimar peso y tamaño del animal, indicando un número aproximado de perros atacantes, centrándose en ciertos tipos de raza, y localizar a cualquier cánido sospechoso.

Novel and conserved microRNAs in soybean floral whorls.

MicroRNAs (miRNAs) correspond to a class of endogenous small non-coding RNAs (19-24 nt) that regulates the gene expression, through mRNA target cleavage or translation inhibition. In plants, miRNAs have been shown to play pivotal roles in a wide variety of metabolic and biological processes like plant growth, development, and response to biotic and abiotic stress. Soybean is one of the most important crops worldwide, due to the production of oil and its high protein content. The reproductive phase is considered the most important for soybean yield, which is mainly intended to produce the grains. The identification of miRNAs is not yet saturated in soybean, and there are no studies linking them to the different floral organs. In this study, three different mature soybean floral whorls were used in the construction of sRNA libraries. The sequencing of petal, carpel and stamen libraries generated a total of 10,165,661 sequences. Subsequent analyses identified 200 miRNAs sequences, among which, 41 were novel miRNAs, 80 were conserved soybean miRNAs, 31 were new antisense conserved soybean miRNAs and 46 were soybean miRNAs isoforms. We also found a new miRNA conserved in other plant species, and finally one miRNA-sibling of a soybean conserved miRNA. Conserved and novel miRNAs were evaluated by RT-qPCR. We observed a differential expression across the three whorls for six miRNAs. Computational predicted targets for miRNAs analyzed by RT-qPCR were identified and present functions related to reproductive process in plants. In summary, the increased accumulation of specific and novel miRNAs in different whorls indicates that miRNAs are an important part of the regulatory network in soybean flower.

Bilateral mandibular fourth molars: A case report.

INTRODUCTION: Fourth molars are supernumerary teeth located distal to the third molars that may cause local alterations. Therefore an adequate diagnosis and treatment are essential. Removal of the supernumerary tooth and, in selected cases, maintenance of the tooth on the arch and frequent observation are the preferred treatments. If the extraction is recommended, it should be performed carefully by experienced oral surgeons to prevent damage to the anatomical structures. OBSERVATION: The oral examination of a 26-year-old woman revealed a left partially impacted mandibular molar responsible for pain and infection. Although it was assumed it was a third molar, the panoramic radiograph showed that the real third molar was completely impacted and that two partially impacted mandibular fourth molars were present bilaterally. Both of them were removed without complications and the left third molar was extracted after fragmentation to avoid any injury of the contiguous inferior alveolar nerve. DISCUSSION: The extraction of the left fourth molars solved the pain. Even if the right fourth molar was asymptomatic, the patient accepted its extraction because of the evident radiographical pericoronitis and to avoid further complications. "Asymptomatic" does not mean absence of disease, but the patient's consent is mandatory before any decision.

p.L18P: a novel IDUA mutation that causes a distinct attenuated phenotype in mucopolysaccharidosis type I patients.

Mucopolysaccharidosis type I is a rare autosomal recessive disorder caused by deficiency of α-l-iduronidase (IDUA) which leads to a wide spectrum of clinical severity. Here, we describe the case of four male patients who present the previously undescribed p.L18P mutation. Patient 1 (p.L18P/p.L18P) presents, despite multiple joint contractures, an attenuated phenotype. Patient 2 (p.L18P/p.W402X) was diagnosed at 4 years of age with bone dysplasia, coarse facies, limited mobility, claw hands and underwent bilateral carpal tunnel surgery at 6 years of age. Patients 3 and 4 (both p.L18P/p.L18P) are brothers. Patient 3 was diagnosed at 4 years of age, when presented claw hands, lower limb and shoulder pain, restricted articular movement and bilateral carpal tunnel syndrome. Patient 4 was diagnosed at 17 months of age when presented lower limb pain at night, respiratory allergy and repeated upper airways infections. Bioinformatics analysis indicates that p.L18P mutation reduces the signal peptide to 25 amino acids and alters its secondary structure. In conclusion, we report a new IDUA variant that alters the structure of the signal peptide, which likely impairs transport to lysosomes. Moreover, it leads to a distinct attenuated phenotype with mainly bone and cartilage symptoms, without visceromegalies, heart disease, or cognitive impairment.

Caracterização da equideocultura no estado de Minas Gerais / Characterization of equidae breeding in Minas Gerais state

Recently, horse breeding has achieved greater prominence in the Brazilian society and now it started to appear as a part of the Brazilian agribusiness. The state of Minas Gerais stands out as the main producer of equidae in Brazil. The aim of this work was to characterize the breeding of equidae in this State in order to support future researches in this sector. By the evaluation of records from 1990 to 2009 provided by the "Brazilian Institute of Geography and Statistics" (IBGE) and also 967 interviews with breeders of equidae, it was possible to characterize some important points. It was observed that equidae breeding in this State moves over R$1,500,000,000 per year and employs 86,000 people. The main investments of the properties are made in purchasing saddles, accessories and commercial feeds. The main goal of equidae breeders in Minas Gerais has been the work in rural properties (49.49%) complementing many farming activities, especially the work with cows. Although Minas Gerais holds the main herd of equidae in the country, the number of animals has decreased. On the one hand, the equidae breeding sector has demonstrated its social and economic importance in agribusiness; on the other, hand further researches are needed to develop public policies to improve the breeding of equidae in Minas Gerais.

The contribution from transit dose for (192)Ir HDR brachytherapy treatments.

Brachytherapy treatment planning systems that use model-based dose calculation algorithms employ a more accurate approach that replaces the TG43-U1 water dose formalism and adopt the TG-186 recommendations regarding composition and geometry of patients and other relevant effects. However, no recommendations were provided on the transit dose due to the source traveling inside the patient. This study describes a methodology to calculate the transit dose using information from the treatment planning system (TPS) and considering the source's instantaneous and average speed for two prostate and two gynecological cases. The trajectory of the (192)Ir HDR source was defined by importing applicator contour points and dwell positions from the TPS. The transit dose distribution was calculated using the maximum speed, the average speed and uniform accelerations obtained from the literature to obtain an approximate continuous source distribution simulated with a Monte Carlo code. The transit component can be negligible or significant depending on the speed profile adopted, which is not clearly reported in the literature. The significance of the transit dose can also be due to the treatment modality; in our study interstitial treatments exhibited the largest effects. Considering the worst case scenario the transit dose can reach 3% of the prescribed dose in a gynecological case with four catheters and up to 11.1% when comparing the average prostate dose for a case with 16 catheters. The transit dose component increases by increasing the number of catheters used for HDR brachytherapy, reducing the total dwell time per catheter or increasing the number of dwell positions with low dwell times. This contribution may become significant (>5%) if it is not corrected appropriately. The transit dose cannot be completely compensated using simple dwell time corrections since it may have a non-uniform distribution. An accurate measurement of the source acceleration and maximum speed should be incorporated in clinical practice or provided by the manufacturer to determine the transit dose component with high accuracy.

Avaliação da atividade antimicrobiana do alho (Allium sativum Liliaceae) e de seu extrato aquoso / Evaluation of the antimicrobial activity of garlic (Liliaceae Allium sativum) and its aqueous extract

Objetivou-se avaliar a atividade antimicrobiana do alho (Allium sativum Liliaceae), in natura, e do extrato aquoso, frente à Candida albicans (Ca) e a Estreptococos do grupo B (EGB). O alho in natura e os extratos aquosos 30% e 170%, foram submetidos à avaliação da atividade antimicrobiana usando os métodos de Difusão em Ágar pela técnica do disco e do poço. Os resultados mostraram que o alho, in natura, apresentou halo de inibição de 55,3 ± 2,6 milímetros (mm) frente a Ca e de 27,1 ± 2,6 mm frente à EGB, enquanto o halo de inibição do miconazol foi de 24 ± 0,5 mm e o da Penicilina G de 29,8 ± 0,3 mm. O extrato aquoso de alho a 30% não apresentou atividade antimicrobiana frente à Ca e à EGB Já o extrato aquoso de alho a 170% apresentou halo de inibição frente a Ca, de 11,3 ± 0,7 mm na técnica do disco e de 14,5 ± 0,9 mm na técnica do poço, porém não inibiu o crescimento da EGB Conclui-se que o alho in natura apresentou melhor efeito inibitório frente às cepas de Ca e de EGB.

This study aimed to evaluate the antimicrobial activity of fresh garlic (Liliaceae Allium sativum) and its aqueous extracts against Candida albicans (Ca) and group B Streptococcus (GBS). Fresh garlic and its aqueous extract in concentrations of 30% and 170% were evaluated for their antimicrobial activity using the agar diffusion technique. The results showed that fresh garlic showed a halo of inhibition of 55.3 ± 2.6 millimeters (mm) towards Ca and 27.1 ± 2.6 mm towards GBS while the inhibition halo of miconazole was 24 ± 0.5 mm and the inhibition halo of Penicillin G was 29.8 ± 0.3 mm. The aqueous extract of garlic in the concentration of 30% showed no antimicrobial activity towards Ca and GBS The aqueous extract of garlic at 170%, showed a halo of inhibition towards Ca, of 11.3 ± 0.7 mm in the disk technique and 14.5 ± 0.9 mm in the well technique, but did not inhibit the growth OF GBS We conclude that the fresh garlic showed a better inhibitory effect against the strains of Ca and GBS.

Dens invaginatus in an impacted mesiodens: a morphological study.

Dens invaginatus (DI) is a dental anomaly originated from invagination of the enamel organ into the dental papilla, during odontogenesis. DI may be associated with other abnormalities such as dysmorphic mesiodens, and this unusual condition may be detected by chance on the conventional radiography. However, the three-dimensional nature and the exact morphological patterns of DI are impossible to appreciate from this method. We present a morphological study of impacted mesiodens in a 9-year-old girl, which the three coronal invaginations were detected only by Cone-Beam Computed Tomography (CBCT) in the pre-surgical examination. CBCT, radiographic and microscopic reproductions allow transfer of images to facilitate cooperation of working groups, examination as well as for teaching purposes.

Dissection of the C-terminal region of E1A redefines the roles of CtBP and other cellular targets in oncogenic transformation.

Human adenovirus E1A makes extensive connections with the cellular protein interaction network. By doing so, E1A can manipulate many cellular programs, including cell cycle progression. Through these reprogramming events, E1A functions as a growth-promoting oncogene and has been used extensively to investigate mechanisms contributing to oncogenesis. Nevertheless, it remains unclear how the C-terminal region of E1A contributes to oncogenic transformation. Although this region is required for transformation in cooperation with E1B, it paradoxically suppresses transformation in cooperation with activated Ras. Previous analysis has suggested that the interaction of E1A with CtBP plays a pivotal role in both activities. However, some C-terminal mutants of E1A retain CtBP binding and yet exhibit defects in transformation, suggesting that other targets of this region are also necessary. To explore the roles of these additional factors, we performed an extensive mutational analysis of the C terminus of E1A. We identified key residues that are specifically required for binding all known targets of the C terminus of E1A. We further tested each mutant for the ability to both localize to the nucleus and transform primary rat cells in cooperation with E1B-55K or Ras. Interaction of E1A with importin α3/Qip1, dual-specificity tyrosine-regulated kinase 1A (DYRK1A), HAN11, and CtBP influenced transformation with E1B-55K. Interestingly, the interaction of E1A with DYRK1A and HAN11 appeared to play a role in suppression of transformation by activated Ras whereas interaction with CtBP was not necessary. This unexpected result suggests a need for revision of current models and provides new insight into transformation by the C terminus of E1A.