KTP and Er:YAG laser dental bleaching comparison: a spectrophotometric, thermal and morphologic analysis.

The aim of this study was to compare the results, in terms of temperature, colour change and morphology, of two different laser wavelengths with two different concentrations of hydrogen peroxide (HP). The lasers used were KTP (potassium-titanyl-phosphate) laser (λ = 532 nm (PD = 1.98 W/cm2)) and Er:YAG laser (λ = 2940 nm (PD = 2.54 W/cm2)). The bleaching gels used were PolaOffice 35% HP gel and PolaOffice+ 6% HP gel (SDI, Australia). Thirty-six extracted human teeth were selected and divided into two groups. For the 35% HP treatment, 18 teeth were randomly assigned to three subgroups: (1) HP gel without laser irradiation vs. HP gel + KTP laser irradiation; (2) HP gel without laser irradiation vs. HP gel + Er:YAG irradiation; and (3) HP gel + KTP laser irradiation vs. HP gel + Er:YAG irradiation. The same protocol was used for the 6% HP bleaching treatment. The bleaching results were analysed by a spectrophotometer, the thermal elevation by K thermocouples and the enamel surface by a scanning electron microscope (SEM). The Kruskal-Wallis test and the Mann-Whitney test were performed, and the data were analysed using the software StatView and the free Web statistics tool BiostaTGV. The thermal elevation of the Er:YAG groups was higher than KTP, while only the group 35% HP gel vs. 35% HP gel + Er:YAG showed significant colour differences (p < 0.05). SEM photographs showed slight enamel surface morphologic alterations after bleaching treatment. The Er:YAG laser may improve the bleaching results of 35% HP even if it increases the gel temperature, when compared to the KTP laser.

The "at-home LLLT" in temporo-mandibular disorders pain control: a pilot study.

OBJECTIVES: The Temporo-Mandibular Disorders (TMD) are a set of dysfunctional patterns concerning the temporo-mandibular joints (TMJ) and the masticatory muscles; its main symptom is pain, probably caused by inflammatory changes in the synovial membrane, alterations in the bone marrow of the mandibular condyle and impingement and compression. The aim of this preliminary study was to investigate the effectiveness in the TMD pain reduction of a new laser device recently proposed by the commerce that, due to its reduced dimensions and to be a class I laser according the ANSI classification, may be used at home by the patient himself. MATERIAL AND METHODS: Twenty-four patients with TMD were randomly selected: the inclusion criteria for the sample was the diagnosis of mono- or bi-lateral TMD, with acute pain restricted to the joint area, associated with the absence of any muscle tenderness during palpation. The patients were randomly assigned to two groups: Group 1 (12 patients): patients receiving real LLLT (experimental group). Group 2 (12 patients): patients receiving inactive laser (placebo group). The treatment was performed once a day for two weeks with an 808 nm diode laser by the patient himself with irradiation of the cutaneous zone corresponding to the TMJ for 15 minutes each side. Each patient was instructed to express its pain in a visual analogue scale (VAS) making a perpendicular line between the two extremes representing the felt pain level. Statistical analysis was realized with GraphPad Instat Software, where P<0.05 was considered significant and P<0.01 very significant. RESULTS: The patient's pain evaluation was expressed in the two study groups before the treatment, 1 week and two weeks after the treatment. The differences between the two groups result extremely significant with p<0.0001 for the comparison of VAS value after 1 and 2 weeks. CONCLUSION: This study, even if it may be considered such a pilot study, investigated a new way to control the pain in the temporo-mandibular diseases by an at home self administered laser device. RESULTS are encouraging but they will have to be confirmed by greater studies.

Postoperative discomfort in oral soft tissue surgery: a comparative perspective evaluation of Nd:YAG Laser, quantic molecular resonance scalpel and cold blade.

AIM: The aim of this paper was to compare pain, health-related quality of life (HRQoL) and need for painkillers during the postoperative course of oral soft tissue surgery performed with neodymium-doped yttrium aluminum garnet (Nd:YAG) laser, quantic molecular resonance (QMR) scalpel and cold blade. METHODS: One-hundred and sixty-three similar surgical interventions were subclassified as follows: group 1 (G1), 77 cases performed with Nd:YAG laser; group 2 (G2), 45 cases performed with QMR scalpel and group 3 (G3), 41 cases performed with cold blade. Pain was evaluated using a Visual Analogue Scale (VAS), a Numeric Rating Scale (NRS) and a Verbal Rating Scale-6 (VRS-6) on the same day of surgery (day 0), and at 1, 3 and 7 days after surgery. The HRQoL was evaluated on day 7 using a 0-45 score range questionnaire. On day 7, painkillers taken were recorded. RESULTS: No statistically significant differences could be highlighted in the VAS and NRS scores at day 1, 3 and 7. A trend toward significance at day 0 was evident, with a VAS and NRS average scores lower in G1 than G2 and G3. With regard to VRS-6, the scores resulted statistically lower in G1 than G2 and G3 at day 1 and 3. The HRQoL in G1 was statistically lower than G3. CONCLUSION: Our study demonstrates that the use of new technologies in oral soft tissue surgery is associated to a reduction of postoperative discomfort. The better HRQoL and the lower postoperative pain observed in laser-treated patients may be associated to the possible bio-modulating effect of the laser.

405 nm diode laser, halogen lamp and LED device comparison in dental composites cure: an "in vitro" experimental trial.

BACKGROUND AND AIMS: A 405 nm diode laser is indicated for composite materials polymerizing, thanks to the recent evolution in their compositions, absorbing in blue part of the spectrum. The purpose of this research was to evaluate its performance on two different kinds of composite resins. MATERIALS AND METHODS: Two different composites were polymerized with a traditional halogen lamp, a LED device and a 405 nm diode laser. The depth of the cure, the volumetric shrinkage, and the degree of the conversion (DC%) of the double bond during the curing process were measured. One-way ANOVA test, Kruskal-Wallis tests, and Dunn comparison tests were used for statistic analysis. RESULTS: Regarding the depth of polymerization, the laser had the worst performance on one composite while on the other, no significant difference with the other devices was observed. The volumetric shrinkage showed that laser produced the lowest change in both of the composites. The DC% measure confirmed these findings. CONCLUSIONS: Based on the results of this preliminary study, it is not possible to recommend the 405 nm diode laser for the polymerization of dental composites.

Comparison of two different laser wavelengths' dental bleaching results by photo-Fenton reaction: in vitro study.

The purpose of this study was to perform a preliminary in vitro test on the possible use of two different laser wavelengths, 405 and 532 nm, to improve the dental bleaching results. To perform the test, the degradation of a dye, rhodamine B, under the effects of hydrogen peroxide was used. One hundred and twenty vials were divided into four groups of 30 samples each and, while three of them were irradiated with different wavelengths, 365 nm (reference), 405 nm and 532 nm, the fourth was the non-irradiated control group. Each of the four groups was further divided into three subgroups of 10 cuvettes (n = 10) each. The three subgroups included a group with a rhodamine (RH) solution, a rhodamine and hydrogen peroxide (RH + HP) solution and a rhodamine plus hydrogen peroxide and ferrous gluconate (RH + FR) solution. When hydrogen peroxide was present, only UVA irradiation was able to produce significant results, whereas when the photo-Fenton reaction occurred, all the three wavelengths were able to produce a significant degradation of rhodamine B, with better results for longer wavelengths in comparison with short wavelengths. Within the limitations of this in vitro study, the light of the two laser devices, even remaining less effective than UV activation, showed its ability to improve the performance of bleaching agents based on Fenton photocatalysis, whereas when used in combination with hydrogen peroxide only, the 405-nm laser displayed a small effect and the 532-nm laser produced no effects.

The bleaching efficiency of KTP and diode 810 nm lasers on teeth stained with different substances: An in vitro study.

BACKGROUND AND AIMS: The purpose of this study was to evaluate the bleaching efficiency of two different lasers (KTP and diode 810 nm) on teeth, randomly divided by means an Excel function (Microsoft Excel 2010 "Fx causale") and stored in physiological solution, that were previously stained with different substances commonly considered as a cause of tooth discoloration, such as coffee, tea and red fruits and to investigate the role of laser irradiation in an experimental model, during the dental bleaching process. METHODS: Three groups of 45 bovine teeth were created and immersed for one week in a solution of tea, coffee or red fruits respectively. Each group was divided into three sub-groups of fifteen teeth. One was bleached with a 30% hydrogen peroxide gel for 30 min only as control, another 15 teeth group was bleached with the gel plus 810 nm diode laser irradiation and the last group was bleached with the gel plus KTP irradiation. The lasers were applied in three cycles of 30 sec each with a power of 1.5 W localized on a 10 mm spot on the teeth. The temperature of the gel was checked during the bleaching procedure using a thermometer and the colour of each tooth was measured by a spectrophotometer. RESULTS: Statistical analysis of the collected data was performed using Graph Pad Prism, version 6.01 software, Kruskal-Wallis test and Dunn's multiple comparison test and Mann-Whitney test. P value <0.0001 was considered extremely significant (***), P value between 0.001 to 0.01 very significant (**), P value between 0.01 to 0.05 significant (*) and P value >0.05 not significant (ns). By these tests diode laser was effective only at bleaching teeth stained with coffee meanwhile the KTP laser was efficient at bleaching teeth with coffee, tea and red fruits stains. CONCLUSION: This study suggests that a relation between the laser wavelength and the type of staining on the dental enamel and the efficacy of the whitening treatment exists.

Use of laser in orthodontics: applications and perspectives.

Laser technology got in these years a more and more important role in modern dentistry and, recently, also in orthodontics was proposed the utilization of laser devices. The aim of this work is to describe the utilization of this technology both in soft and hard oral tissues to improve orthodontic treatment. Several cases, with different wavelengths (532, 810, 980, 1064, 2940 and 10600 nm) and in different times of the treatment (before, during and after) are presented. All the cases reported showed, according to the literature, that the use of the laser related to orthodontic treatment offers several advantages when compared with conventional methods. In the soft tissues surgery it allows to reduce or eliminate the use of anesthetic injection, to avoid use of sutures and to bond bracket in dry enamel; associated with orthophosphoric acid, it gives a stronger adhesion of the brackets to the enamel and, in the case of porcelain brackets, it detaches them without damages; at low power (LLLT) it permits to control the pain of the first period after bonding and, by increasing the speed of teeth movement in the bone, reduces the time of the treatment.

Analysis of shade, temperature and hydrogen peroxide concentration during dental bleaching: in vitro study with the KTP and diode lasers.

Many dental bleaching techniques are now available, several of them using a laser source. However, the literature on the exact role of coherent light in the biochemical reaction of the whitening process is very discordant. The aims of this in vitro study were: (1) to compare two different laser sources, a KTP laser with a wavelength of 532 nm and a diode laser with a wavelength of 808 nm, during dental bleaching, and (2) to investigate the relationships among changes in gel temperature, tooth shade and hydrogen peroxide (HP) concentration during laser irradiation. Altogether, 116 bovine teeth were bleached using a 30% HP gel, some of them with gel only and others with gel plus one of the two lasers (532 or 808 nm) at two different powers (2 and 4 W). The KTP laser produced a significant shade variation with a minimal temperature increase. The diode laser led to a higher temperature increase with a greater reduction in HP concentration, but the change in shade was only statistically significant with a power of 4 W. At a power of 2 W, the KTP laser caused a greater change in shade than the diode laser. No significant correlations were found among temperature, HP concentration and shade variation. The KTP laser appears to provide better results with less dangerous thermal increases than the diode laser. This might call into question most of the literature affirming that the action of laser bleaching is by increasing the gel temperature and, consequently, the speed of the redox reaction. Further study is required to investigate the correlations between the parameters investigated and efficacy of the bleaching process.

Er:YAG Laser and Fractured Incisor Restorations: An In Vitro Study.

Introduction. The aim of this study was to analyse the effects of an Er:YAG laser on enamel and dentine in cases of dental restorations involving fractured teeth, utilizing the dental fragment. Materials and Methods. Seventy-two freshly extracted bovine incisors were fractured at the coronal level by using a hammer applied with a standardized method, and the fragment was reattached by using three different methods: Er:YAG laser, orthophosphoric acid, and laser plus acid. The different groups were evaluated by a test realized with the dynamometer to know the force required to successfully detach the reattached fragment and by a microinfiltration test by using a 0.5% methylene blue solution followed by the optic microscope observation. Results. The compression test showed only a slight difference between the three groups, without any statistical significance. The infiltration test used to evaluate the marginal seal between the fracture fragment and the tooth demonstrated that etching with Er:YAG laser alone or in combination with orthophosphoric acid gives better results than orthophosphoric acid alone, with a highly significant statistical result. Discussion. Reattaching a tooth fragment represents a clinically proven methodology, in terms of achieving resistance to detachment, and the aim of this work was to demonstrate the advantages of Er:YAG laser on this procedure. Conclusion. This "in vitro" study confirms that Er:YAG laser can be employed in dental traumatology to restore frontal teeth after coronal fracture.

Laser welding and syncristallization techniques comparison: in vitro study.

Background. Laser welding was first reported in 1967 and for many years it has been used in dental laboratories with several advantages versus the conventional technique. Authors described, in previous works, the possibility of using also chair-side Nd : YAG laser device (Fotona Fidelis III, λ = 1064 nm) for welding metallic parts of prosthetic appliances directly in the dental office, extra- and also intra-orally. Syncristallisation is a soldering technique based on the creation of an electric arc between two electrodes and used to connect implants to bars intra-orally. Aim. The aim of this study was to compare two different laser welding devices with a soldering machine, all of these used in prosthetic dentistry. Material and Methods. In-lab Nd : YAG laser welding (group A = 12 samples), chair-side Nd : YAG laser welding (group B = 12 samples), and electrowelder (group C = 12 samples) were used. The tests were performed on 36 CrCoMo plates and the analysis consisted in evaluation, by microscopic observation, of the number of fissures in welded areas of groups A and B and in measurement of the welding strength in all the groups. The results were statistically analysed by means of one-way ANOVA and Tukey-Kramer multiple comparison tests. Results. The means and standard deviations for the number of fissures in welded areas were 8.12 ± 2.59 for group A and 5.20 ± 1.38 for group B. The difference was statistical significant (P = 0.0023 at the level 95%). On the other hand, the means and standard deviations for the traction tests were 1185.50 ± 288.56 N for group A, 896.41 ± 120.84 N for group B, and 283.58 ± 84.98 N for group C. The difference was statistical significant (P = 0.01 at the level 95%). Conclusion. The joint obtained by welding devices had a significant higher strength compared with that obtained by the electrowelder, and the comparison between the two laser devices used demonstrated that the chair-side Nd : YAG, even giving a lower strength to the joints, produced the lowest number of fissures in the welded area.

Er:YAG Laser: A New Technical Approach to Remove Torus Palatinus and Torus Mandibularis.

Objective. The aim of this study was to assess the ability of Er:YAG laser to remove by excision torus mandibularis and to smooth torus palatinus exostosis. Materials and Methods. Torus mandibularis (TM) and torus palatinus (TP) were surgically eliminated via the Er:YAG laser using the following parameters: TM: output power ranging from 500 to 1000 mJ, frequency from 20 to 30 Hz, sapphire tips (diameter 0.8 mm), air-water spray (ratio 5/5), pulse duration 150 µsec, fluence ranging from 99592 J/cm(2) to 199044,586 J/cm(2). TP: a peeling technique was used to eliminate TP, as excision by slicing being impossible here. Results. TM: excision was obtained after 12730 pulses. TP: smoothing technique took more time compared with excision. Once peeling was considered to be accomplished, the use of a surgical rasp was necessary to eliminate bone spicules that could delay the wound to heal in good conditions. Conclusion. Er:YAG excision (TM) or Er:YAG peeling (TP) are safe clinical techniques easy to practice even if the time required for excision or surface smoothing is more than the time required with bony burs and high speed instruments.

Low energy KTP laser in oral soft tissue surgery: A 52 patients clinical study.

OBJECTIVES: Since 1962 laser appliances have been used for soft tissues surgery of oral cavity with significant advantages compared to the traditional instruments: excellent bleeding control, possibility to avoid the use of suture, good patient compliance thanks to a decrease of intra- and post-operative discomfort and biostimulating effect. Unfortunately, the wavelengths so far used have been seen to cause, in association with an excellent ablation capacity, heat damage of the tissues that can decrease healing process and cause a greater discomfort to patients. To evaluate the laser-assisted KTP laser surgery at low power in terms of characteristics of intervention and patients compliance. STUDY DESIGN: In this study, we describe the application of a new and recently introduced in dentistry wavelength, the KTP laser (532 nm), used with low power parameter (1 Watt - CW), evaluating the time of interventions and, by a Numerical Rating Scale, the intra and postoperative pain. RESULTS: KTP laser used at low power permits to obtain good pain control during operations that were carried out with only a topic anaesthetic (EMLA, Astratech), as shown in VAS tests. Good healing with limited or absent burning areas in treated portion of tissue. CONCLUSIONS: These preliminary study allows us to affirm that KTP laser with low parameters permits to perform oral surgery with good pain control and good wound healing. A greater number of clinical cases are however necessary to confirm the result obtained.

Intra-oral laser welding: an in vitro evaluation of thermal increase.

The neodymium:yttrium-aluminium-garnet (Nd:YAG) laser is currently used in dental laboratories to weld metals on dental prostheses. Recently, the use of Nd:YAG has been suggested so that dentists themselves can repair broken fixed, removable and orthodontic prostheses by welding metals directly in the mouth. This work aimed to evaluate, through a four k-type thermocouple system on calf jaws, the thermal increase in the biological structures close to the metal parts during laser welding. We put two hemispherical metal plates onto mandibular molars and then laser welded them at three points with a four k-thermocouple system to determine the thermal rise in the pulp chamber, sulcus, root and bone. This procedure was carried out on 12 samples, and the results were processed. The highest values of thermal increase were found in the pulp chamber, 1.5 degrees C; sulcus, 0.7 degrees C; root, 0.3 degrees C; and bone, 0.3 degrees C. This study showed that thermal increases in pulp chamber, sulcus, root and bone were biologically compatible and that intra-oral laser welding, at the parameters used in this work, seems to be harmless to the biological structures close to the welding and thermally affected zones.

Nd:YAG and diode laser in the surgical management of soft tissues related to orthodontic treatment.

OBJECTIVE: The aim of this clinical study was to observe and evaluate the surgical management efficiency of soft tissues during orthodontic treatment. MATERIALS AND METHODS: Thirty-seven young patients were selected and treated by laser-assisted surgery before or during orthodontic treatment and were classified by sex, age, and type of surgical management. Three different wavelengths were used (diode 810 nm, diode 980 nm, and Nd:YAG 1064 nm) in different surgical situations: maxillary vestibular and lingual frenectomies, surgical exposure and alignment of ectopic or retained teeth, and re-contouring gingival overgrowth. RESULTS: In all evaluated patients, the laser treatment was performed without local anesthesia or sutures. Only topical anesthetic was needed. CONCLUSION: These use of these wavelengths of laser energy was a noticeable aid in the surgical management of soft tissues before or during orthodontic treatment. The benefits of laser treatment include reduced bleeding during surgery with consequent reduced operating time and rapid postoperative hemostasis, thus eliminating the need for sutures. The lack of need for anesthetics and sutures, as well as improved postoperative comfort and healing, make this technique particularly useful for very young patients.