Engineering a better light sheet in an axicon-based system using a flattened Gaussian beam of low order.

Lasers are fundamental tools in research and development. The shape of an incident laser beam directly affects the results, when it propagates through complex structured meso-aspheric optical elements. In conic-based systems utilizing elements such as axicons, the impact of secondary lobes is mostly overlooked, although the intensity distributions at the central spot and the side-lobes directly affect the beam properties. We investigate the interaction of two axicons (160° and 170°) with incident beams approximated by Gaussian, high-order Flattened-Gaussian, and low-order Flattened-Gaussian functions. We demonstrate that replacing an incident Gaussian beam with a low-order Flattened-Gaussian beam reduces the secondary lobes and significantly improves the uniformity of the intensity profile. We practically applied this effect in engineering a conic-aspheric-based static light-sheet microscope producing markedly improved results.

3D histopathology of human tumours by fast clearing and ultramicroscopy.

Here, we describe a novel approach that allows pathologists to three-dimensionally analyse malignant tissues, including the tumour-host tissue interface. Our visualization technique utilizes a combination of ultrafast chemical tissue clearing and light-sheet microscopy to obtain virtual slices and 3D reconstructions of up to multiple centimetre sized tumour resectates. For the clearing of tumours we propose a preparation technique comprising three steps: (a) Fixation and enhancement of tissue autofluorescence with formalin/5-sulfosalicylic acid. (b) Ultrafast active chemical dehydration with 2,2-dimethoxypropane and (c) refractive index matching with dibenzyl ether at up to 56 °C. After clearing, the tumour resectates are imaged. The images are computationally post-processed for contrast enhancement and artefact removal and then 3D reconstructed. Importantly, the sequence a-c is fully reversible, allowing the morphological correlation of one and the same histological structures, once visualized with our novel technique and once visualized by standard H&E- and IHC-staining. After reverting the clearing procedure followed by standard H&E processing, the hallmarks of ductal carcinoma in situ (DCIS) found in the cleared samples could be successfully correlated with the corresponding structures present in H&E and IHC staining. Since the imaging of several thousands of optical sections is a fast process, it is possible to analyse a larger part of the tumour than by mechanical slicing. As this also adds further information about the 3D structure of malignancies, we expect that our technology will become a valuable addition for histological diagnosis in clinical pathology.

Deconvolution of light sheet microscopy recordings.

We developed a deconvolution software for light sheet microscopy that uses a theoretical point spread function, which we derived from a model of image formation in a light sheet microscope. We show that this approach provides excellent blur reduction and enhancement of fine image details for image stacks recorded with low magnification objectives of relatively high NA and high field numbers as e.g. 2x NA 0.14 FN 22, or 4x NA 0.28 FN 22. For these objectives, which are widely used in light sheet microscopy, sufficiently resolved point spread functions that are suitable for deconvolution are difficult to measure and the results obtained by common deconvolution software developed for confocal microscopy are usually poor. We demonstrate that the deconvolutions computed using our point spread function model are equivalent to those obtained using a measured point spread function for a 10x objective with NA 0.3 and for a 20x objective with NA 0.45.

High-resolution imaging of fluorescent whole mouse brains using stabilised organic media (sDISCO).

Optical tissue clearing using dibenzyl ether (DBE) or BABB (1 part benzyl alcohol and 2 parts benzyl benzoate) is easy in application and allows deep-tissue imaging of a wide range of specimens. However, in both substances, optical clearing and storage times of enhanced green fluorescent protein (EGFP)-expressing specimens are limited due to the continuous formation of peroxides and aldehydes, which severely quench fluorescence. Stabilisation of purified DBE or BABB by addition of the antioxidant propyl gallate efficiently preserves fluorescence signals in EGFP-expressing samples for more than a year. This enables longer clearing times and improved tissue transparency with higher fluorescence signal intensity. The here introduced clearing protocol termed stabilised DISCO allows to image spines in a whole mouse brain and to detect faint changes in the activity-dependent expression pattern of tdTomato.

High-resolution ultramicroscopy of the developing and adult nervous system in optically cleared Drosophila melanogaster.

The fruit fly, Drosophila melanogaster, is an important experimental model to address central questions in neuroscience at an organismic level. However, imaging of neural circuits in intact fruit flies is limited due to structural properties of the cuticle. Here we present a novel approach combining tissue clearing, ultramicroscopy, and data analysis that enables the visualisation of neuronal networks with single-cell resolution from the larval stage up to the adult Drosophila. FlyClear, the signal preserving clearing technique we developed, stabilises tissue integrity and fluorescence signal intensity for over a month and efficiently removes the overall pigmentation. An aspheric ultramicroscope set-up utilising an improved light-sheet generator allows us to visualise long-range connections of peripheral sensory and central neurons in the visual and olfactory system. High-resolution 3D reconstructions with isotropic resolution from entire GFP-expressing flies are obtained by applying image fusion from orthogonal directions. This methodological integration of novel chemical, optical, and computational techniques allows a major advance in the analysis of global neural circuit organisation.

Reshaping a multimode laser beam into a constructed Gaussian beam for generating a thin light sheet.

Based on the modal analysis method, we developed a model that describes the output beam of a diode-pumped solid state (DPSS) laser emitting a multimode beam. Measuring the output beam profile in the near field and at the constructed far field the individual modes, their respective contributions, and their optical parameters are determined. Using this information, the beam is optically reshaped into a quasi-Gaussian beam by the interference and superposition of the various modes. This process is controlled by a mode modulator unit that includes different meso-aspheric elements and a soft-aperture. The converted beam is guided into a second optical unit comprising achromatic-aspheric elements to produce a thin light sheet for ultramicroscopy. We found that this light sheet is markedly thinner and exhibits less side shoulders compared with a light sheet directly generated from the output of a DPSS multimode laser.

Outlook on optimizing ultramicroscopy imaging technique through optical characterization.

Here, we present an optically optimized system for static ultramicroscopy imaging technique. The unit for generating an ultra-thin light sheet employs aspheric and meso-optical elements (meso-aspheric system). An analytical as well as an experimental comparison between the light sheet produced by the standard system (using a rectangular slit aperture and one cylindrical lens) and the one produced by our latest optimized system, which converts a symmetrical Gaussian beam into an ultra-thin light sheet is presented. Using the new light sheet in combination with our objective equipped with a modulator unit to compensate the refractive index mismatch between air and mediums with indices of 1.45-1.56, we present high resolution images of various biological samples that were chemically cleared using different methods. They demonstrate a marked improvement in quality, contrast and resolution.