Processing biological samples from simulated radiological terrorist events using Rapid DNA instruments.

Two commercially available portable Rapid DNA instruments were evaluated for their ability to process 1 µL and 10 µL saliva samples deposited on metal and plastic surfaces and contaminated with surrogates of cesium (Cs)-137, strontium (Sr)-90 and cobalt (Co)-60; radioactive materials potentially released during a nuclear weapon accident or a radiological dispersal device detonation. A comparable success rate was noted for both Rapid DNA instruments when considering the number of complete and balanced DNA profiles, the number of profiles with a minimum of 10 autosomal STR loci (out of 23 [FlexPlex™ 27] or 21 [GlobalFiler™ Express]), and the possibility to search a national DNA database in Canada and the United States. Cobalt had an adverse impact on the quality of the megaplex short tandem repeat (STR) DNA profiles derived on each instrument for two of the three contamination levels tested in this study, i.e., 0.05 M and 0.1 M as reflected by a reduced number of detected alleles and decreased profile peak heights. Strontium exhibited some adverse effect on the Rapid DNA results when used at the highest contamination level (0.1 M) whereas cesium had none. No new artifacts were observed in the Rapid DNA profiles of samples spiked with the non-radiogenic surrogates. Importantly, in the context of a radiological/nuclear (RN) event, the ANDE™ 6C offers the possibility to dispose of all radioactive materials associated with contaminated samples quickly using a chip on which all steps of the Rapid DNA process are performed whereas the RapidHIT™ ID accumulates radioactive materials for many days before disposal. An individual handling 25 samples in a week (5 per day) on the RapidHIT™ ID at a 30.5 cm distance with a 5 min exposure to the radioactive source estimated at every run would exceed the 0.042 µSv/5 min limit with gamma dose rates for Cs at 0.13 mSv and for Co at 3.8 mSv. Beta dose rates calculated for the surrogate isotopes at the three concentrations tested were also above the recommended radiation exposure limit of 1 mSv/yr (0.042 µSv/5 min). Various potential mechanisms of action behind the interference noted for Sr and Co at high concentrations are presented. These elements may play a role in the steps prior to PCR (at the DNA molecule by binding to bases or to phosphate groups), during PCR (at the DNA polymerase as cofactors for catalytic sites), or even during amplified DNA fragment detection (as fluorescence quenchers).

Validation of the Verogen ForenSeq™ DNA Signature Prep kit/Primer Mix B for phenotypic and biogeographical ancestry predictions using the Micro MiSeq® Flow Cells.

In anticipation of offering phenotypic and biogeographical ancestry predictions to help resolve cases, the Verogen ForenSeq™ DNA Signature Prep kit/Primer Mix B was evaluated in the context of Micro MiSeq® Flow Cells. These flow cells were determined as the best format for a quick turnaround time response and cost effective approach compared to standard flow cells. The phenotype informative SNPs (piSNPs) and ancestry informative SNPs (aiSNPs) were thoroughly examined through sensitivity, reproducibility and repeatability, concordance, robustness (mock casework) and low level DNA mixture studies purposely selecting individuals with different phenotypes (hair and eye color) when possible and different biogeographical ancestry. SNP locus-specific interpretation thresholds were established for the Universal Analysis Software (UAS) based on surviving alleles and SNP predictor rank to minimize false homozygous genotypes and maximize the information that can be derived from an unknown sample. Dropin alleles' intensity determined an appropriate threshold to minimize false heterozygous SNP genotypes. The selection of inappropriate interpretation thresholds was shown to have major consequences on phenotypic predictions. A 3.2% and 4.8% minor DNA component contribution to a DNA mixture had no impact on ancestry predictions whereas a 9.1% contribution did. The multi-locus SNP genotypes generated using the ForenSeq™ DNA Signature Prep kit/Primer Mix B were shown to be reliable, reproducible, concordant and resulted in predictions that were also reliable, reproducible and concordant based on the limited number of donors (N = 19) used in this study.

Simulated radioactive decontamination of biological samples using a portable DNA extraction instrument for rapid DNA profiling.

A portable DNA extraction instrument was evaluated for its ability to decontaminate blood and saliva samples deposited on different surfaces (metal, plastic and glass) contaminated with stable isotopes of cobalt (Co), cesium (Cs), and strontium (Sr) as equivalents to their radiogenic (60)Co, (137)Cs, and (90)Sr isotopes, respectively, that could be released during a nuclear weapon accident or a radiological dispersal device (RDD) detonation. Despite the very high contamination levels tested in this study, successful removal of greater than 99.996% of the Co, Cs, Sr contaminants was achieved based on inductively coupled plasma-mass spectrometry (ICP-MS) and neutron activation analyses carried out on all liquids (including DNA eluates) and solid waste produced during automated DNA extraction. The remaining amounts of Co, Cs and Sr in the DNA eluates, when converted to dose rates (corresponding to (60)Co, (137)Cs and (90)Sr), were determined to be below the recommended dose limits for the general public in most of the scenarios tested. The presence of Co, Cs and Sr contaminants in the cell lysates had no adverse impact on the binding of DNA onto the magnetic DNA IQ™ beads. DNA yields were similar to uncontaminated controls. The remaining Co, Cs and Sr in the DNA eluates did not interfere with real-time PCR DNA quantification. In addition, the quality of the AmpFlSTR(®) Identifiler(®) profiles derived in 26min using an accelerated protocol was very good and comparable to controls. This study emphasizes the use of an accelerated process involving a portable DNA extraction instrument to significantly reduce radioactive dose rates to allow contaminated samples to be processed safely in a forensic mobile laboratory to expedite the identification of individuals potentially involved in the dispersal of nuclear or other radioactive materials.

An Accelerated Analytical Process for the Development of STR Profiles for Casework Samples.

Significant efforts are being devoted to the development of methods enabling rapid generation of short tandem repeat (STR) profiles in order to reduce turnaround times for the delivery of human identification results from biological evidence. Some of the proposed solutions are still costly and low throughput. This study describes the optimization of an analytical process enabling the generation of complete STR profiles (single-source or mixed profiles) for human identification in approximately 5 h. This accelerated process uses currently available reagents and standard laboratory equipment. It includes a 30-min lysis step, a 27-min DNA extraction using the Promega Maxwell(®) 16 System, DNA quantification in <1 h using the Qiagen Investigator(®) Quantiplex HYres kit, fast amplification (<26 min) of the loci included in AmpFℓSTR(®) Identifiler(®), and analysis of the profiles on the 3500-series Genetic Analyzer. This combination of fast individual steps produces high-quality profiling results and offers a cost-effective alternative approach to rapid DNA analysis.

The Qiagen Investigator® Quantiplex HYres as an alternative kit for DNA quantification.

The Investigator® Quantiplex HYres kit was evaluated as a potential replacement for dual DNA quantification of casework samples. This kit was determined to be highly sensitive with a limit of quantification and limit of detection of 0.0049ng/µL and 0.0003ng/µL, respectively, for both human and male DNA, using full or half reaction volumes. It was also accurate in assessing the amount of male DNA present in 96 mock and actual casework male:female mixtures (various ratios) processed in this exercise. The close correlation between the male/human DNA ratios expressed in percentages derived from the Investigator® Quantiplex HYres quantification results and the male DNA proportion calculated in mixed AmpFlSTR® Profiler® Plus or AmpFlSTR® Identifiler® Plus profiles, using the Amelogenin Y peak and STR loci, allowed guidelines to be developed to facilitate decisions regarding when to submit samples to Y-STR rather than autosomal STR profiling. The internal control (IC) target was shown to be more sensitive to inhibitors compared to the human and male DNA targets included in the Investigator® Quantiplex HYres kit serving as a good quality assessor of DNA extracts. The new kit met our criteria of enhanced sensitivity, accuracy, consistency, reliability and robustness for casework DNA quantification.

Sperm Hy-Liter™: an effective tool for the detection of spermatozoa in sexual assault exhibits.

A fluorescence-based assay specifically targeting human spermatozoa was tested and optimized for best staining results using a variety of mock sexual assault samples. Swab clippings versus whole swabs were evaluated for best sample preparation and to simplify workflow (direct application versus swab extraction). The practicality and sensitivity of Sperm Hy-Liter™ was compared to our current phase contrast microscopy protocol for searching for the presence of spermatozoa. Sperm Hy-Liter™ was more sensitive than phase contrast microscopy and was able to detect spermatozoa more effectively in actual sexual assault samples (recent [N=240] or 24 years old [N=4]) containing few spermatozoa. Correlations were drawn between the Sperm Hy-Liter™ spermatozoa counts and the AmpFlSTR(®) Profiler(®) Plus male profiles generated from the sperm cell DNA fractions of semen containing swabs and swab clippings. In addition, recovered spermatozoa from Sperm Hy-Liter™-stained slides with greater than 40 spermatozoa produced full STR male profiles in 20.3% of slides tested and partial STR male profiles in 52.8% of slides tested. The adoption of Sperm Hy-Liter™ offers a means to standardize and improve the efficiency of the microscopic screening of sexual assault evidence.

Competition for DNA binding sites using Promega DNA IQ™ paramagnetic beads.

The Promega DNA IQ™ system is easily amenable to automation and has been an integral part of standard operating procedures for many forensic laboratories including those of the Royal Canadian Mounted Police (RCMP) since 2004. Due to some failure to extract DNA from samples that should have produced DNA using our validated automated DNA IQ™-based protocol, the competition for binding sites on the DNA IQ™ magnetic beads was more closely examined. Heme from heavily blooded samples interfered slightly with DNA binding. Increasing the concentration of Proteinase K during lysis of these samples did not enhance DNA recovery. However, diluting the sample lysate following lysis prior to DNA extraction overcame the reduction in DNA yield and preserved portions of the lysates for subsequent manual or automated extraction. Dye/chemicals from black denim lysates competed for binding sites on the DNA IQ™ beads and significantly reduced DNA recovery. Increasing the size or number of black denim cuttings during lysis had a direct adverse effect on DNA yield from various blood volumes. The dilution approach was successful on these samples and permitted the extraction of high DNA yields. Alternatively, shortening the incubation time for cell lysis to 30 min instead of the usual overnight at 56 °C prevented competition from black denim dye/chemicals and increased DNA yields.

Validation of a DNA IQ-based extraction method for TECAN robotic liquid handling workstations for processing casework.

A semi-automated DNA extraction process for casework samples based on the Promega DNA IQ™ system was optimized and validated on TECAN Genesis 150/8 and Freedom EVO robotic liquid handling stations configured with fixed tips and a TECAN TE-Shake™ unit. The use of an orbital shaker during the extraction process promoted efficiency with respect to DNA capture, magnetic bead/DNA complex washes and DNA elution. Validation studies determined the reliability and limitations of this shaker-based process. Reproducibility with regards to DNA yields for the tested robotic workstations proved to be excellent and not significantly different than that offered by the manual phenol/chloroform extraction. DNA extraction of animal:human blood mixtures contaminated with soil demonstrated that a human profile was detectable even in the presence of abundant animal blood. For exhibits containing small amounts of biological material, concordance studies confirmed that DNA yields for this shaker-based extraction process are equivalent or greater to those observed with phenol/chloroform extraction as well as our original validated automated magnetic bead percolation-based extraction process. Our data further supports the increasing use of robotics for the processing of casework samples.

Optimized manual and automated recovery of amplifiable DNA from tissues preserved in buffered formalin and alcohol-based fixative.

Archival tissue preserved in fixative constitutes an invaluable resource for histological examination, molecular diagnostic procedures and for DNA typing analysis in forensic investigations. However, available material is often limited in size and quantity. Moreover, recovery of DNA is often severely compromised by the presence of covalent DNA-protein cross-links generated by formalin, the most prevalent fixative. We describe the evaluation of buffer formulations, sample lysis regimens and DNA recovery strategies and define optimized manual and automated procedures for the extraction of high quality DNA suitable for molecular diagnostics and genotyping. Using a 3-step enzymatic digestion protocol carried out in the absence of dithiothreitol, we demonstrate that DNA can be efficiently released from cells or tissues preserved in buffered formalin or the alcohol-based fixative GenoFix. This preparatory procedure can then be integrated to traditional phenol/chloroform extraction, a modified manual DNA IQ or automated DNA IQ/Te-Shake-based extraction in order to recover DNA for downstream applications. Quantitative recovery of high quality DNA was best achieved from specimens archived in GenoFix and extracted using magnetic bead capture.

Application of human mini-satellite VNTR probes to genotyping in cynomolgus macaques.

Cynomolgus macaques (also known as longtail or crab-eating macaques) Macaca fascicularis, are an important non-human primate model for biomedical research. Using a case study involving a suspected occurrence of twin birth, we demonstrate that the highly polymorphic human variable-number tandem repeat (VNTR) mini-satellite probes D1S7, D2S44, D3S42 and D4S184 can be successfully employed as a rapid screening strategy to complement husbandry records in order to establish genetic relatedness in a captive colony.

Automated processing of forensic casework samples using robotic workstations equipped with nondisposable tips: contamination prevention.

An automated process has been developed for the analysis of forensic casework samples using TECAN Genesis RSP 150/8 or Freedom EVO liquid handling workstations equipped exclusively with nondisposable tips. Robot tip cleaning routines have been incorporated strategically within the DNA extraction process as well as at the end of each session. Alternative options were examined for cleaning the tips and different strategies were employed to verify cross-contamination. A 2% sodium hypochlorite wash (1/5th dilution of the 10.8% commercial bleach stock) proved to be the best overall approach for preventing cross-contamination of samples processed using our automated protocol. The bleach wash steps do not adversely impact the short tandem repeat (STR) profiles developed from DNA extracted robotically and allow for major cost savings through the implementation of fixed tips. We have demonstrated that robotic workstations equipped with fixed pipette tips can be used with confidence with properly designed tip washing routines to process casework samples using an adapted magnetic bead extraction protocol.

Enhanced kinship analysis and STR-based DNA typing for human identification in mass fatality incidents: the Swissair flight 111 disaster.

A bioinformatic tool was developed to assist with the victim identification initiative that followed the Swissair Flight 111 disaster. Making use of short tandem repeat (STR) DNA typing data generated with AmpFlSTR Profiler Plus (PP) and AmpFlSTR COfiler(CO) kits, the software systematically compared each available STR genotype with every other genotype. The matching algorithm was based on the search for: (i) direct matches to genotypes derived from personal effects; and (ii) potential kinship associations between victims and next-of-kin, as measured by allele sharing at individual loci. The software greatly assisted parentage analysis by enabling kinship evaluation in situations where complete parentage trios were unavailable and, in some situations, with distantly related relatives. Exclusion of fortuitous kinship associations (FKA) was made possible through the recovery at the disaster site of at least one remains for every sought-after victim, and was incorporated into the kinship software. The data from the 13 combined STR loci produced 6 and 23 times fewer FKAs when compared with PP alone and AmpFlSTR Profiler (PR) alone, respectively. Identification leads or confirmations of identification were obtained for 218 victims for which DNA reference samples (personal effects and kin) had been submitted. Confirmation of an inferred kinship association was sought through frequency and likelihood calculations, as well as corroborative data from other identification modalities. The use of a simple, yet powerful, automated genotype comparison approach and the use of megaplexes with high power of discrimination (PD) values extended considerably the identification capabilities in the case of the Swissair disaster. The DNA typing identification modality proved to be a valuable component of the large arsenal of identification tools deployed in the aftermath of this disaster.

Systematic analysis of stutter percentages and allele peak height and peak area ratios at heterozygous STR loci for forensic casework and database samples.

To assist the interpretation of STR DNA typing results from forensic casework samples containing mixtures, the range of heterozygous allele peak height and peak area ratios (HR) and stutter percentages (stutter %) for the loci comprised in the AmpFlSTR Profiler Plus (PP) kit were assessed on 468 database and 275 casework single source samples. Stutter % medians were similar for database and casework samples, ranging from 2% to 7%. The upper limit of the stutter value range was 16%, calculated as median +3 SD, although lower locus-specific values could be used. HR medians were 93 +/- 6.5% for database samples, 88 +/- 12% for casework samples. For casework samples, the maximum signal imbalance noted was 52%, calculated as median -3 SD. No significant difference was observed between peak height and peak area calculated values. This study shows the importance of selecting the proper reference database for the establishment of HR threshold values.

Precision and accuracy in fluorescent short tandem repeat DNA typing: assessment of benefits imparted by the use of allelic ladders with the AmpF/STR Profiler Plus kit.

Base-calling precision of short tandem repeat (STR) allelic bands on dynamic slab-gel electrophoresis systems was evaluated. Data was collected from over 6000 population database allele peaks generated from 468 population database samples amplified with the AmpF/STR Profiler Plus (PP) kit and electrophoresed on ABD 377 DNA sequencers. Precision was measured by way of standard deviations and was shown to be essentially the same, whether using fixed or floating bin genotyping. However, the allelic ladders have proven more sensitive to electrophoretic variations than database samples, which have caused some floating bins of D18S51 to shift on occasion. This observation prompted the investigation of polyacrylamide gel formulations in order to stabilize allelic ladder migration. The results demonstrate that, although alleles comprised in allelic ladders and questioned samples run on the same gel should migrate in an identical manner, this premise needs to be verified for any given electrophoresis platform and gel formulation. We show that the compilation of base-calling data is a very informative and useful tool for assessing the performance stability of dynamic gel electrophoresis systems, stability on which depends genotyping result quality.

STR DNA typing: increased sensitivity and efficient sample consumption using reduced PCR reaction volumes.

Improvements in detection limits/sensitivity and lower sample consumption are potential benefits of reducing PCR reaction volumes used in forensic DNA typing of crime scene samples. This premise was studied first with experimental mixtures and a nine-loci megaplex, which demonstrated stochiometric amplification and accurate detection. Next, adjudicated casework samples were subjected to amplification under 15 different template DNA to PCR reaction volume ratios. Reduction of PCR reaction volume and DNA down to 10 microL and 0.500 ng, respectively, produced identical profiles with the same signal intensity and heterozygous allele peak height ratio (HR). Reduction to 5 microL and 0.063 ng yielded HR values that were slightly affected in one to three STR loci. PCR reaction volume reduction can enhance detection and sensitivity while reducing the consumption of irreplaceable crime scene samples.

AmpFlSTR profiler Plus short tandem repeat DNA analysis of casework samples, mixture samples, and nonhuman DNA samples amplified under reduced PCR volume conditions (25 microL).

As part of the validation of the AmpFlSTR Profiler Plus short tandem repeat (STR) system, under reduced polymerase chain reaction (PCR) volume conditions (i.e., 25 microL), a total of 275 casework samples were processed. Examples of profiles are presented along with amplification conditions to improve the odds of obtaining balanced and complete profiles for samples showing partial results or profiles with a descending slope. Data collected and used to develop our interpretation guidelines are included. From the mixture studies, full profiles were obtained for minor contributors, using 2 ng of DNA, with ratios of 10:1 or 1:20 and using 1 ng of DNA, with ratios of 10:1 and 1:8. The specificity of the Profiler Plus amplification reaction performed in 25 microL was examined and confirmed using a large spectrum of nonhuman DNAs. This report supports the use of the AmpFlSTR Profiler Plus STR system for casework DNA typing under reduced PCR volume conditions.