An MR-compatible force sensor based on FBG technology for biomedical application.

Fiber Bragg Grating (FBG) technology is very attractive to develop sensors for the measurement of thermal and mechanical parameters in biological applications, particularly in presence of electromagnetic interferences. This work presents the design, working principle and experimental characterization of a force sensor based on two FBGs, with the feature of being compatible with Magnetic Resonance. Two prototypes based on different designs are considered and characterized: 1) the fiber with the FBGs is encapsulated in a polydimethylsiloxane (PDMS) sheet; 2) the fiber with the FBGs is free without the employment of any polymeric layer. Results show that the prototype which adopts the polymeric sheet has a wider range of measurement (4200 mN vs 250 mN) and good linearity; although it has lower sensitivity (≈0.1 nm-N(1) vs 7 nm-N(1)). The sensor without polymeric layer is also characterized by employing a differential configuration which allows neglecting the influence of temperature. This solution improves the linearity of the sensor, on the other hand the sensitivity decreases. The resulting good metrological properties of the prototypes here tested make them attractive for the intended application and in general for force measurement during biomedical applications in presence of electromagnetic interferences.

A micro opto-mechanical displacement sensor based on micro-diffraction gratings: design and characterization.

A micro opto-mechanical displacement sensor is here presented. It is constituted by a sensing element based on two overlapped micro-diffraction gratings (MDGs). They present a platinum layer (45 nm of thick) on a glass substrate, a period of 525 µm constituted by a width of 150 µm of platinum separated (71.4% duty cycle). The working principle is based on the modulation of light intensity induced by the relative displacement between the MDGs: when a laser light perpendicularly hits the MDGs, the intensity of the transmitted light is a periodic function of the relative displacement between the two MDGs. A fiber optic is used to transport the transmitted light to a photodetector in order to avoid concerns related to the alignment between the optical components. The sensor's output is the ratio between the light intensity measured by the photodetector during the displacement of the MDGs and largest light intensity values measured in the whole range of measurement, therefore, it is lower than 1. The proposed sensor allows to discriminate displacement lower than 10 µm, using a cost effective micro-fabrication process implemented by the technique of Lift-Off. It shows a good linear behaviour in two ranges covering about one half of the MDGs period. Within the linear ranges it shows high sensitivity (about 0.5%/µm) and good accuracy (lower than 4% in the whole range of calibration); furthermore, the results show that a design with a duty cycle of 50% overcomes the marked decrease of sensitivity in a range of measurement corresponding to a grating period.

An implantable neural interface with electromagnetic stimulation capabilities.

Invasive interfaces with the Peripheral Nervous System (PNS), which currently rely on electric means for both nerves stimulation and signals recording, are needed in a number of applications, including prosthetics and assistive technologies. Recent studies showed that the quality of the signal-to-noise ratio of the afferent channel might be negatively affected by physiological reactions, including fibrosis. In this paper we propose a novel approach to the development of implantable neural interfaces, where the PNS is excited electromagnetically and in situ, while electrical means are used only for neural signals recording. Electromagnetic (EM) waves, capable of overcoming fibrotic capsules, are generated by microfabricated coils. Stimulation coils and registration electrodes are deposited on the same flexible substrate, also provided with a bio-absorbable coating, which releases anti-fibrotic drugs and neurons-specific functionalized magnetic nanoparticles (NPs). The NPs are intended to improve the capability of local EM waves to elicit membranes depolarization, thus enhancing selectivity. This paper details the concept of the proposed technology and provides a preliminary in silico feasibility study.

A micromachined intensity-modulated fiber optic sensor for strain measurements: working principle and static calibration.

This paper describes an intensity-modulated fiber optic sensor for strain measurements. The sensing element is a polydimetilsiloxane (PDMS) micro-diffraction grating, 15 mm long, 2 mm thick, with channels 150 µm wide, spaced apart 200 µm. The working principle of the sensor can be summarized as follows: when the sensing element is strained perpendicularly to the grating plane, light passing through the grating undergoes a modulation caused by the phenomenon of diffraction. Since the grating is interposed between a laser source and a fiber optic, the coupled radiation intensity between these two optical elements can be considered as an indirect measure of strain. A static calibration of the measuring system has been performed, showing that the device, with measuring range of about 0.04, is capable to discriminate strain of 0.005 and it presents a sensitivity increase with strain in the whole range of measurements.

Reconstruction of nasal skin cancer defects with local flaps.

Reconstruction of nasal defects must preserve the integrity of complex facial functions and expressions, as well as facial symmetry and a pleasing aesthetic outcome. The reconstructive modality of choice will depend largely on the location, size, and depth of the surgical defect. Individualized therapy is the best course, and numerous flaps have been designed to provide coverage of a variety of nasal-specific defects. We describe our experience in the aesthetic reconstruction of nasal skin defects following oncological surgery. The use of different local flaps for nasal skin cancer defects is reported in 286 patients. Complications in this series were one partial flap dehiscence that healed by secondary intention, two forehead flaps, and one bilobed flap with minimal rim necrosis that resulted in an irregular scar requiring revision. Aesthetic results were deemed satisfactory by all patients and the operating surgeons. The color and texture matches were aesthetically good, and the nasal contour was distinct in all patients. All scars were inconspicuous and symmetrical. No patient had tenting or a flat nose.

Optimization of kinetic energy harvesters design for fully implantable Cochlear Implants.

Fully implantable Cochlear Implants (CIs) would represent a tremendous advancement in terms of quality of life, comfort and cosmetics, for patients with profound sensorineural deafness. One of the main challenges involved in the development of such implants consists of finding a power supply means which does not require recharging. To this aim an inertial Energy Harvester (EH), exploiting the kinetic energy produced by vertical movements of the head during walking, has been investigated. Compared to existing devices, the EH needs to exploit very low frequency vibrations (<2.5 Hz) with small amplitude (<9 m/s(2)). In order to maximize the power transduced, an optimization method has been developed, which is the objective of this paper. The method consists in calculating the dynamical behavior of the EH using discrete transforms of experimentally measured acceleration profiles. It is shown that the quick integration of the second order dynamical equation allows the use of computationally intensive optimization techniques, such as Genetic Algorithms (GAs). The robustness of the solution is also evaluated.

Characterization of pseudoxanthoma elasticum-like lesions in the skin of patients with beta-thalassemia.

BACKGROUND: Pseudoxanthoma elasticum (PXE), an inherited disorder of unknown pathogenesis, is characterized by elastic fiber mineralization, collagen fibril alterations, and accumulation of thread material in the extracellular space. PXE-like clinical lesions have been described in patients with beta-thalassemia. OBJECTIVE AND METHODS: Dermal lesions in these two genetic disorders were compared by light and electron microscopy and by immunocytochemistry. RESULTS: In both disorders, elastic fiber polymorphism, fragmentation, and mineralization were structurally identical. Elastic fiber mineralization in beta-thalassemia was associated with vitronectin, bone sialoprotein, and alkaline phosphatase, similar to what was observed in inherited PXE. Furthermore, abnormalities of collagen fibrils and filament aggregates were identical in both disorders. In both inherited and beta-thalassemia-associated PXE, unrelated gene defects seem to induce cell metabolic abnormalities that lead to identical clinical and structural phenotypes. CONCLUSION: Data indicate that patients with beta-thalassemia may undergo important alterations of connective tissues, a better understanding of which may help in preventing clinical complications.

Baseline biophysical parameters in subjects with sensitive skin.

Sensitive skin has been described as a skin type showing higher reactivity than normal skin and developing exaggerated reactions when exposed to external factors. The stinging test, performed by applying lactic acid to the nasolabial fold and evaluating the intensity of subjective symptoms, is widely accepted as a marker of sensitivity and employed for the selection of subjects experiencing invisible cutaneous irritation. However, this test is based on self-perceived assessment and lacks objectivity. In order to contribute to the finding of objective descriptors, we assessed baseline biophysical parameters in subjects with sensitive skin by means of transepidermal water loss (TEWL), capacitance, pH, sebum and skin colour measurements, and compared the data with those obtained in normal subjects, also correlating the results with those of clinical assessments and functional tests. Subjects with sensitive skin showed a trend towards higher scores at all assessment times both for the stinging and the washing test. The skin of sensitive subjects was described as less supple, less hydrated and more erythematous and telangiectatic with respect to the skin of normal subjects. A trend towards an increase in TEWL, pH and colorimetric a* values, and a decrease in capacitance, sebum and colorimetric L* values on the face of subjects with sensitive skin was observable. However, significances were only present for capacitance and a* values. Thus, alterations of baseline capacitance values indicate the tendency to barrier impairment and support the view that skin hyperreactivity to water-soluble irritants is induced by a greater amount of irritants absorbed, whereas the increase in the erythema parameter shows that cutaneous vascular hyperreactivity in subjects with sensitive skin also corresponds to baseline vasodilation.