Development of a monoclonal antibody sandwich ELISA for the determination of antigen content and quality in diphtheria vaccines.

At present, quality control of diphtheria vaccines by both manufacturers and national control laboratories relies heavily on in vivo assays to confirm potency. As part of the VAC2VAC project we have developed a monoclonal antibody (mAb) enzyme-linked immunosorbent assay (ELISA) to measure the relative amount and quality of diphtheria toxoid (DTxd) in diphtheria-tetanus based vaccines and believe this test has the potential to play a key role in a control strategy no longer including an in vivo potency test. The mAb ELISA is highly specific, has good dilutional linearity, and is suitable for detecting DTxd in a range of different human vaccine products. We demonstrate the ability of the assay to discriminate between batches of different content and quality using vaccine batches that were prepared to contain differing amounts of DTxd or were altered by exposure to heat or oxidative stress. We also demonstrate successful transfer of the method to other laboratories and show that different diphtheria antigen materials may be able to serve as a reference antigen for local standardization of the method. The assay is ideally suited for incorporation into a consistency approach for routine diphtheria vaccine quality control testing and may be suitable to serve as the stability indicating test in replacement of the current in vivo potency test.

Diphtheria vaccines help to protect against diphtheria infection. Currently, animal tests are used to ensure the potency of such vaccines. Since these tests were first introduced, there have been improvements in non-animal technologies that can be used to ensure consistent production of potent vaccine batches. To demonstrate that a new batch of diphtheria vaccine is consistent with a previous batch of known potency, the quality and amount of the component that stimulates the immune response upon vaccination must be assessed in comparison. We have developed an assay that can measure the quality of a range of different diphtheria vaccine product types. The assay is very specific and reliable, and different laboratories obtained comparable results, showing that the assay is suited for routine use. Once validated by manufacturers and recognized by regulators, this assay will greatly reduce the number of animals needed for batch release of diphtheria vaccines.

Development of a multiplex-based immunoassay for the characterization of diphtheria, tetanus and acellular pertussis antigens in human combined DTaP vaccines.

Routine batch quality testing before vaccine release, notably for potency evaluation, still relies on animal use for several animal and human vaccines. In this context, the VAC2VAC project is a public-private consortium of 22 partners funded by EU whose the main objective is to reduce the number of animal used for batch testing by developing immunoassays that could be implemented for routine potency assessment of vaccines. This paper focused on the development of a Luminex-based multiplex assay to monitor the consistency of antigen quantity and quality throughout the production process of DTaP vaccines from two human vaccine manufacturers. Indepth characterized monoclonal antibody pairs were used for development and optimization of the Luminex assay with non-adsorbed and adsorbed antigens and with complete vaccine formulations from both manufacturers. The multiplex assay demonstrated good specificity, reproducibility and absence of cross-reactivity. Analysis of over and underdosed formulations, heat and H2O2-degraded products as well as batch to batch consistency of vaccines from both manufacturers brought the proof of concept for a future application of the multiplex immunoassay as a useful tool in the frame of DTaP vaccine quality control.

Third dose of COVID-19 mRNA vaccine closes the gap in immune response between naïve nursing home residents and healthy adults.

BACKGROUND: Nursing home residents, a frail and old population group, respond poorly to primary mRNA COVID-19 vaccination. A third dose has been shown to boost protection against severe disease and death in this immunosenescent population, but limited data is available on the immune responses it induces. METHODS: In this observational cohort study, peak humoral and cellular immune responses were compared 28 days after the second and third doses of the BNT162b2 mRNA COVID-19 vaccine in residents and staff members of two Belgian nursing homes. Only individuals without evidence of previous SARS-CoV-2 infection at third dose administration were included in the study. In addition, an extended cohort of residents and staff members was tested for immune responses to a third vaccine dose and was monitored for vaccine breakthrough infections in the following six months. The trial is registered on ClinicalTrials.gov (NCT04527614). FINDINGS: All included residents (n = 85) and staff members (n = 88) were SARS-CoV-2 infection naïve at third dose administration. Historical blood samples from 28 days post second dose were available from 42 residents and 42 staff members. Magnitude and quality of humoral and cellular immune responses were strongly boosted in residents post third compared to post second dose. Increases were less pronounced in staff members than in residents. At 28 days post third dose, differences between residents and staff had become mostly insignificant. Humoral, but not cellular, responses induced by a third dose were predictive of subsequent incidence of vaccine breakthrough infection in the six months following vaccination. INTERPRETATION: These data show that a third dose of mRNA COVID-19 vaccine largely closes the gap in humoral and cellular immune response observed after primary vaccination between NH residents and staff members but suggest that further boosting might be needed to achieve optimal protection against variants of concern in this vulnerable population group.

Regulation of Clostridium tetani Neurotoxin Expression by Culture Conditions.

BACKGROUND: Ensuring consistency of tetanus neurotoxin (TeNT) production by Clostridium tetani could help to ensure consistent product quality in tetanus vaccine manufacturing, ultimately contributing to reduced animal testing. The aim of this study was to identify RNA signatures related to consistent TeNT production using standard and non-standard culture conditions. METHODS: We applied RNA sequencing (RNA-Seq) to study C. tetani gene expression in small-scale batches under several culture conditions. RESULTS: We identified 1381 time-dependent differentially expressed genes (DEGs) reflecting, among others, changes in growth rate and metabolism. Comparing non-standard versus standard culture conditions identified 82 condition-dependent DEGs, most of which were specific for one condition. The tetanus neurotoxin gene (tetX) was highly expressed but showed expression changes over time and between culture conditions. The tetX gene showed significant down-regulation at higher pH levels (pH 7.8), which was confirmed by the quantification data obtained with the recently validated targeted LC-MS/MS approach. CONCLUSIONS: Non-standard culture conditions lead to different gene expression responses. The tetX gene appears to be the best transcriptional biomarker for monitoring TeNT production as part of batch-to-batch consistency testing during tetanus vaccine manufacturing.

Poor Antibody Response to BioNTech/Pfizer Coronavirus Disease 2019 Vaccination in Severe Acute Respiratory Syndrome Coronavirus 2-Naive Residents of Nursing Homes.

BACKGROUND: Residents of nursing homes (NHs) are at high risk of coronavirus disease 2019 (COVID-19)-related disease and death and may respond poorly to vaccination because of old age and frequent comorbid conditions. METHODS: Seventy-eight residents and 106 staff members, naive to infection or previously infected with severe acute respiratory syndrome coronavirus (SARS-CoV-2), were recruited in NHs in Belgium before immunization with 2 doses of 30 µg BNT162b2 messenger RNA (mRNA) vaccine at days 0 and 21. Binding antibodies (Abs) to SARS-CoV-2 receptor-binding domain (RBD), spike domains S1 and S2, RBD Ab avidity, and neutralizing Abs against SARS-CoV-2 wild type and B.1.351 were assessed at days 0, 21, 28, and 49. RESULTS: SARS-CoV-2-naive residents had lower Ab responses to BNT162b2 mRNA vaccination than naive staff. These poor responses involved lower levels of immunoglobulin (Ig) G to all spike domains, lower avidity of RBD IgG, and lower levels of Abs neutralizing the vaccine strain. No naive residents had detectable neutralizing Abs to the B.1.351 variant. In contrast, SARS-CoV-2-infected residents had high responses to mRNA vaccination, with Ab levels comparable to those in infected staff. Cluster analysis revealed that poor vaccine responders included not only naive residents but also naive staff, emphasizing the heterogeneity of responses to mRNA vaccination in the general population. CONCLUSIONS: The poor Ab responses to mRNA vaccination observed in infection-naive NH residents and in some naive staff members suggest suboptimal protection against breakthrough infection, especially with variants of concern. These data support the administration of a third dose of mRNA vaccine to further improve protection of NH residents against COVID-19.

Safety and immunogenicity of a reduced dose of the BNT162b2 mRNA COVID-19 vaccine (REDU-VAC): A single blind, randomized, non-inferiority trial.

Fractional dosing of COVID-19 vaccines could accelerate vaccination rates in low-income countries. Dose-finding studies of the mRNA vaccine BNT162b2 (Pfizer-BioNTech) suggest that a fractional dose induces comparable antibody responses to the full dose in people <55 years. Here, we report the safety and immunogenicity of a fractional dose regimen of the BNT162b2 vaccine. REDU-VAC is a participant-blinded, randomised, phase 4, non-inferiority study. Adults 18-55 years old, either previously infected or infection naïve, were randomly assigned to receive 20µg/20µg (fractional dose) or 30µg/30µg (full dose) of BNT162b2. The primary endpoint was the geometric mean ratio (GMR) of SARS-CoV-2 anti-RBD IgG titres at 28 days post second dose between the reduced and full dose regimens. The reduced dose was considered non-inferior to the full dose if the lower limit of the two-sided 95% CI of the GMR was >0.67. Primary analysis was done on the per-protocol population, including infection naïve participants only. 145 participants were enrolled and randomized, were mostly female (69.5%), of European origin (95%), with a mean age of 40.4 years (SD 7.9). At 28 days post second dose, the geometric mean titre (GMT) of anti-RBD IgG of the reduced dose regimen (1,705 BAU/mL) was not non-inferior to the full dose regimen (2,387 BAU/mL), with a GMR of 0.714 (two-sided 95% CI 0.540-0.944). No serious adverse events occurred. While non-inferiority of the reduced dose regimen was not demonstrated, the anti-RBD IgG titre was only moderately lower than that of the full dose regimen and, importantly, still markedly higher than the reported antibody response to the licensed adenoviral vector vaccines. These data suggest that reduced doses of the BNT162b2 mRNA vaccine may offer additional benefit as compared to the vaccines currently in use in most low and middle-income countries, warranting larger immunogenicity and effectiveness trials. Trial Registration: The trial is registered at ClinicalTrials.gov (NCT04852861).

Development and validation of a targeted LC-MS/MS quantitation method to monitor cell culture expression of tetanus neurotoxin during vaccine production.

The tetanus neurotoxin (TeNT) is one of the most toxic proteins known to man, which prior to the use of the vaccine against the TeNT producing bacteria Clostridium tetani, resulted in a 20% mortality rate upon infection. The clinical detrimental effects of tetanus have decreased immensely since the introduction of global vaccination programs, which depend on sustainable vaccine production. One of the major critical points in the manufacturing of these vaccines is the stable and reproducible production of high levels of toxin by the bacterial seed strains. In order to minimize time loss, the amount of TeNT is often monitored during and at the end of the bacterial culturing. The different methods that are currently available to assess the amount of TeNT in the bacterial medium suffer from variability, lack of sensitivity, and/or require specific antibodies. In accordance with the consistency approach and the three Rs (3Rs), both aiming to reduce the use of animals for testing, in-process monitoring of TeNT production could benefit from animal and antibody-free analytical tools. In this paper, we describe the development and validation of a new and reliable antibody free targeted LC-MS/MS method that is able to identify and quantify the amount of TeNT present in the bacterial medium during the different production time points up to the harvesting of the TeNT just prior to further upstream purification and detoxification. The quantitation method, validated according to ICH guidelines and by the application of the total error approach, was utilized to assess the amount of TeNT present in the cell culture medium of two TeNT production batches during different steps in the vaccine production process prior to the generation of the toxoid. The amount of TeNT generated under different physical stress conditions applied during bacterial culture was also monitored.

Characterisation of tetanus monoclonal antibodies as a first step towards the development of an in vitro vaccine potency immunoassay.

Batch release testing for human and veterinary tetanus vaccines still relies heavily on methods that involve animals, particularly for potency testing. The quantity and quality of tetanus antigen present in these products is of utmost importance for product safety and clinical effect. Immunochemical methods that measure consistency of antigen content and quality, potentially as an indicator of potency, could be a better choice and negate the need for an in vivo potency test. These immunochemical methods require at least one well characterised monoclonal antibody (mAb) that is specific for the target antigen. In this paper we report the results of the comprehensive characterisation of a panel of mAbs against tetanus with a view to select antibodies that can be used for development of an in vitro potency immunoassay. We have assessed binding of the antibodies to native antigen (toxin), detoxified antigen (toxoid), adsorbed antigen and heat-altered antigen. Antibody function was determined using an in-house cell-based neutralisation assay to support prior in vivo potency data that was available for some, but not all, of the antibodies. In addition, antibody affinity was measured, and epitope competition analysis was performed to identify pairs of antibodies that could be deployed in a sandwich immunoassay format. Not all characterisation tests provided evidence of "superiority" of one mAb over another, but together the results from all characterisation studies allowed for selection of an antibody pair to be taken forward to assay development.

Characterisation of diphtheria monoclonal antibodies as a first step towards the development of an in vitro vaccine potency immunoassay.

Immunoassays are used for routine potency assessment of several vaccines, in some cases having been specifically developed as alternatives to in vivo potency tests. These methods require at least one well characterised monoclonal antibody (mAb) that is specific for the target antigen. In this paper we report the results of the comprehensive characterisation of a panel of mAbs against diphtheria with a view to select antibodies that can be used for development of an in vitro potency immunoassay for diphtheria vaccines. We have assessed binding of the antibodies to native antigen (toxin), detoxified antigen (toxoid), adsorbed antigen and heat-altered antigen. Antibody function was determined by a cell-based toxin neutralisation test and diphtheria toxin-domain recognition was determined by Western blotting. In addition, antibody affinity was measured, and epitope competition analysis was performed to identify pairs of antibodies that could be deployed in a sandwich immunoassay format. Not all characterisation tests provided evidence of "superiority" of one mAb over another, but together the results from all characterisation studies allowed for selection of an antibody pair to be taken forward to assay development.

The occurrence of putative cognitive enhancing research peptides in seized pharmaceutical preparations: An incentive for controlling agencies to prepare for future encounters of the kind.

At the end of 2017 and 2018 two different unknown suspicious preparations were encountered and were subjected to a plethora of different analyses in order to identify, if present, any bioactive compound. It turned out that these samples contained the assumedly cognitive enhancing research peptides Selank and Semax, which, to our knowledge, have not completed any clinical trials. Moreover, an online search, excluding the dark web, demonstrated that these kinds of nootropic research peptides are freely available either as lyophilized powder for injection purposes or are present in nasal sprays. It stands to reason that controlling laboratories need to anticipate the uprising of these types of potentially dangerous molecules and must therefore be able to correctly identify these compounds. Therefore, these findings served as an incentive to develop a novel combined liquid chromatography tandem mass spectroscopy (LC-MS/MS) methodology, applicable to both hydrophilic or more hydrophobic peptides, which was utilized to analyze a total of 10 putative cognitive enhancing polypeptides, with variable biochemical characteristics, that are currently being sold online. The screening rationale, complying to the recommendation paper of the General European Official Medicines Control Laboratory (OMCL) network on the interpretation of screening results for unknown peptides by mass spectrometry, was also validated in different matrices as required by ISO 17025.