Retrofittable plug-flow reactor for in situ high-temperature vibrating sample magnetometry with well-controlled gas atmospheres.

We have developed an in situ sample-holder-akin to a quartz-based plug-flow reactor-for vibrating sample magnetometry (VSM) in gas-controlled environments at ambient pressure and temperatures up to ∼1000 °C. The holder matches onto a specific type of vibrating sample magnetometer (Lake Shore model 7404-S), but the principles are applicable to other types of VSM. The holder has been tested on powder samples of Co particles on a MgAl2O4 support in both reducing and oxidizing atmospheres. The results show control of gas composition and sample reduction/oxidation. In comparison with conventional sample cups, the in situ holder shows a similar measurement sensitivity but a better repeatability due to the well-controlled gas atmosphere. Moreover, the in situ holder uses a closed gas tubing system such that the active gas only passes by the sample and it is not in contact with the VSM and oven parts. At the outlet, the gas can be collected for analysis and safe handling.

Universal Synthesis of Half-Metallic Diatomic Catalysts for Efficient Oxygen Reduction Electrocatalysis.

Developing efficient and low-cost noble-free metal electrocatalysts is an urgent requirement. Herein, a one-step, solid-state template-assisted method for fabricating isolated half-metallic diatomic M, Zn─N─C (M═Fe, Co, and Ni) catalysts is reported. In particular, the fabricated Fe, Zn─N─C structure exhibits superior oxygen reduction reaction capabilities with a half-wave potential of 0.867 V versus RHE. The Mossbauer spectra reveal that the Fe, Zn─N─C half-metallic diatomic catalyst has a large proportion of the D2 site (ferrous iron with a medium spin state). Density functional theory (DFT) reveals that in Fe, Zn─N─C structures, the zinc sites play a unique role in accelerating the protonation process of O2 in ORR. In assembled zinc-air batteries, a maximum power density of 138 mW cm-2 and a capacity of 748 mAh g zn-1 can be obtained. This work fabricates a series of efficient M, Zn─N─C diatomic electrocatalysts, and the developed solid-state reaction method can hopefully apply in other energy conversion and storage fields.

Preoperative intervention to prevent delirium in patients with hip fracture - a systematic review.

INTRODUCTION: Delirium is a syndrome characterised by disturbance of consciousness and is a common complication to hip fractures. This systematic review was conducted to investigate the effect of simple preoperative interventions for the prevention of delirium in patients with hip fractures. The aim was to establish an easily implementable and resource-sparring treatment for the initial admission phase of hip fracture patients aimed at reducing the incidence of delirium. MEHODS: Five databases were searched to identify randomised controlled trials comparing preoperative interventions other than geriatric assessment to placebo or usual care. Our primary outcome was incidence of delirium using a well-defined delirium-screening tool. Secondary outcomes included need for pharmacological treatment, duration of delirium and mortality. RESULTS: A total of 13 RCTs provided data on 2,222 patients who had been exposed to 11 different interventions. Four interventions significantly reduced of the incidence of delirium: methylprednisolone (odds ratio (OR) = 0.42; 95% confidence interval (CI): 0.17-1.00; p = 0.048), fascia iliaca block (OR = 0.39; 95% CI: 0.18-0.84; p = 0.02), hypertonic saline (OR = 0.21; 95% CI: 0.08-0.55; p = 0.001) and rivastigmine patches (OR = 0.23; 95% CI: 0.07-0.77; p = 0.013). All studies were rated as having a high risk of overall bias. CONCLUSIONS: Robust conclusions are precluded by study heterogeneity and high risk of bias in the included studies. However, this systematic review provides an indication of treatments that should be investigated further to establish any effect on delirium in the preoperative setting in hip fracture patients.

Simulated clustering dynamics of colloidal magnetic nanoparticles.

Magnetically guided self-assembly of nanoparticles is a promising bottom-up method to fabricate novel materials and superstructures, such as, for example, magnetic nanoparticle clusters for biomedical applications. The existence of assembled structures has been verified by numerous experiments, yet a comprehensive theoretical framework to explore design possibilities and predict emerging properties is missing. Here we present a model of magnetic nanoparticle interactions built upon a Langevin dynamics algorithm to simulate the time evolution and aggregation of colloidal suspensions. We recognise three main aggregation regimes: non-aggregated, linear and clustered. Through systematic simulations we have revealed the link between single particle parameters and which aggregates are formed, both in terms of the three regimes and the chance of finding specific aggregates, which we characterise by nanoparticle arrangement and net magnetic moment. Our findings are shown to agree with past experiments and may serve as a stepping stone to guide the design and interpretation of future studies.

Electrified methane reforming: A compact approach to greener industrial hydrogen production.

Electrification of conventionally fired chemical reactors has the potential to reduce CO2 emissions and provide flexible and compact heat generation. Here, we describe a disruptive approach to a fundamental process by integrating an electrically heated catalytic structure directly into a steam-methane-reforming (SMR) reactor for hydrogen production. Intimate contact between the electric heat source and the reaction site drives the reaction close to thermal equilibrium, increases catalyst utilization, and limits unwanted byproduct formation. The integrated design with small characteristic length scales allows compact reactor designs, potentially 100 times smaller than current reformer platforms. Electrification of SMR offers a strong platform for new reactor design, scale, and implementation opportunities. Implemented on a global scale, this could correspond to a reduction of nearly 1% of all CO2 emissions.

Photoinduced O2-Dependent Stepwise Oxidative Deglycination of a Nonheme Iron(III) Complex.

The iron(III) complex [Fe(tpena)]2+ (tpena = N, N, N'-tris(2-pyridylmethyl)ethylendiamine- N'-acetate) undergoes irreversible O2-dependent N-demethylcarboxylation to afford [FeII(SBPy3)(MeCN)]2+ (SBPy3 = N, N-bis(2-pyridylmethyl)amine- N-ethyl-2-pyridine-2-aldimine), when irradiated with near-UV light. The loss of a mass equivalent to the glycyl group in a process involving consecutive C-C and C-N cleavages is documented by the measurement of the sequential production of CO2 and formaldehyde, respectively. Time-resolved UV-vis absorption, Mössbauer, EPR, and Raman spectroscopy have allowed the spectroscopic characterization of two iron-based intermediates along the pathway. The first of these, proposed to be a low-spin iron(II)-radical ligand complex, reacts with O2 in the rate-determining step to produce a putative alkylperoxide complex. DFT calculations suggest that this evolves into an Fe(IV)-oxo species, which can abstract a hydrogen atom from a cis methylene group of the ligand to give the second spectroscopically identified intermediate, a high-spin iron(III)-hydroxide of the product oxidized ligand, [FeIII(OH)(SBPy3)]2+. Reduction and exchange of the cohydroxo/water ligand produces the crystallographically characterized products [FeII(SBPy3)(X)]2+/3+, X = MeCN, [Zn(tpena)]+.

Dual-Function Cobalt-Nickel Nanoparticles Tailored for High-Temperature Induction-Heated Steam Methane Reforming.

The tailored chemical synthesis of binary and ternary alloy nanoparticles with a uniform elemental composition is presented. Their dual use as magnetic susceptors for induction heating and catalytic agent for steam reforming of methane to produce hydrogen at temperatures near and above 800 °C is demonstrated. The heating and catalytic performance of two chemically synthesized samples of CoNi and Cu⊂CoNi are compared and held against a traditional Ni-based reforming catalyst. The structural, magnetic, and catalytic properties of the samples were characterized by X-ray diffraction, elemental analysis, magnetometry, and reactivity measurements. For induction-heated catalysts, the conversion rate of methane is limited by chemical reactivity, as opposed to the case of traditional externally heated reformers where heat transport limitations are the limiting factor. Catalyst production by the synthetic route allows controlled doping with miniscule concentrations of auxiliary metals.

Directing a Non-Heme Iron(III)-Hydroperoxide Species on a Trifurcated Reactivity Pathway.

The reactivity of [FeIII (tpena)]2+ (tpena=N,N,N'-tris(2-pyridylmethyl)ethylenediamine-N'-acetate) as a catalyst for oxidation reactions depends on its ratio to the terminal oxidant H2 O2 and presence or absence of sacrificial substrates. The outcome can be switched between: 1) catalysed H2 O2 disproportionation, 2) selective catalytic oxidation of methanol or benzyl alcohol to the corresponding aldehyde, or 3) oxidative decomposition of the tpena ligand. A common mechanism is proposed involving homolytic O-O cleavage in the detected transient purple low-spin (S=1/2 ) [(tpenaH)FeIII O-OH]2+ . The resultant iron(IV) oxo and hydroxyl radical both participate in controllable hydrogen-atom transfer (HAT) reactions. Consistent with the presence of a weaker σ-donor carboxylate ligand, the most pronounced difference in the spectroscopic properties of [Fe(OOH)(tpenaH)]2+ and its conjugate base, [Fe(OO)(tpenaH)]+ , compared to non-heme iron(III) peroxide analogues supported by neutral multidentate N-only ligands, are slightly blue-shifted maxima of the visible absorption band assigned to ligand-to-metal charge-transfer (LMCT) transitions and, corroborating this, lower FeIII /FeII redox potentials for the pro-catalysts.

Formation Mechanism of Maghemite Nanoflowers Synthesized by a Polyol-Mediated Process.

Magnetic nanoparticles are being developed as structural and functional materials for use in diverse areas, including biomedical applications. Here, we report the synthesis of maghemite (γ-Fe2O3) nanoparticles with distinct morphologies: single-core and multicore, including hollow spheres and nanoflowers, prepared by the polyol process. We have used sodium acetate to control the nucleation and assembly process to obtain the different particle morphologies. Moreover, from samples obtained at different time steps during the synthesis, we have elucidated the formation mechanism of the nanoflowers: the initial phases of the reaction present a lepidocrocite (γ-FeOOH) structure, which suffers a fast dehydroxylation, transforming to an intermediate "undescribed" phase, possibly a partly dehydroxylated lepidocrocite, which after some incubation time evolves to maghemite nanoflowers. Once the nanoflowers have been formed, a crystallization process takes place, where the γ-Fe2O3 crystallites within the nanoflowers grow in size (from ∼11 to 23 nm), but the particle size of the flower remains essentially unchanged (∼60 nm). Samples with different morphologies were coated with citric acid and their heating capacity in an alternating magnetic field was evaluated. We observe that nanoflowers with large cores (23 nm, controlled by annealing) densely packed (tuned by low NaAc concentration) offer 5 times enhanced heating capacity compared to that of the nanoflowers with smaller core sizes (15 nm), 4 times enhanced heating effect compared to that of the hollow spheres, and 1.5 times enhanced heating effect compared to that of single-core nanoparticles (36 nm) used in this work.

Glycine buffered synthesis of layered iron(II)-iron(III) hydroxides (green rusts).

Layered FeII-FeIII hydroxides (green rusts, GRs) are efficient reducing agents against oxidizing contaminants such as chromate, nitrate, selenite, and nitroaromatic compounds and chlorinated solvents. In this study, we adopted a buffered precipitation approach where glycine (GLY) was used in the synthesis of sulfate-interlayered GR (GRSO4) by aerial oxidation of FeII or co-precipitation by adding FeIII salt to an aqueous solution of FeII at constant pH. In both the oxidation and the co-precipitation methods pure crystalline GRSO4 was precipitated in the presence of 70mM GLY (pH 8.0), whereas in the absence of GLY, synthesis failed under similar conditions. Gycine functions as both a pH buffer and a ligand; FeII-GLY complexes serve as a source of base (FeII-GLY+H2O→FeII+H-GLY+OH-) during GR formation, supplying about 45% of the total base required for the synthesis. The GLY buffer decreases pH fluctuations during base addition and hence allows for fast GRSO4 precipitation, minimizing byproduct formation. The use of other pH buffers [4-(2-hydroxyethyl)piperazine-1-ethanesulfonic acid and 2-amino-2-(hydroxymethyl)-1,3-propanediol] was also tested but failed. Mössbauer spectroscopy, X-ray diffraction, Fourier transform infrared, transmission electron microscopy, and FeII measurements confirmed the purity, stoichiometry, and pyroaurite-type structure of the obtained GRSO4. The formula of GRSO4 was found to be FeII4.08FeIII1.98(OH)11.6(SO4)1.00, and the tabular GR crystals had a lateral size of 100-500nm and a thickness of about 40nm. Upscaling of the synthesis by either 25 times in volume or 20 times in FeII concentration resulted in pure GRSO4 products. Compared with the conventional unbuffered GRSO4 synthesis method, the present method can provide pure products with a controllable, fast, and low-cost process.

Direct observation of the thermal demagnetization of magnetic vortex structures in nonideal magnetite recorders.

The thermal demagnetization of pseudo-single-domain (PSD) magnetite (Fe3O4) particles, which govern the magnetic signal in many igneous rocks, is examined using off-axis electron holography. Visualization of a vortex structure held by an individual Fe3O4 particle (~250 nm in diameter) during in situ heating is achieved through the construction and examination of magnetic-induction maps. Stepwise demagnetization of the remanence-induced Fe3O4 particle upon heating to above the Curie temperature, performed in a similar fashion to bulk thermal demagnetization measurements, revealed that its vortex state remains stable under heating close to its unblocking temperature and is recovered upon cooling with the same or reversed vorticity. Hence, the PSD Fe3O4 particle exhibits thermomagnetic behavior comparable to a single-domain carrier, and thus, vortex states are considered reliable magnetic recorders for paleomagnetic investigations.

Halogen-Bonding-Assisted Iodosylbenzene Activation by a Homogenous Iron Catalyst.

The iron(III) complex of hexadentate N,N,N'-tris(2-pyridylmethyl)ethylendiamine-N'-acetate (tpena(-) ) is a more effective homogenous catalyst for selective sulfoxidation and epoxidation with insoluble iodosylbenzene, [PhIO]n , compared with soluble methyl-morpholine-N-oxide (NMO). We propose that two molecules of [Fe(tpena)](2+) cooperate to solubilize PhIO, extracting two equivalents to form the halogen-bonded dimeric {[Fe(tpena)OIPh]2}(4+). The closest intradimeric I⋅⋅⋅O distance, 2.56 Å, is nearly 1 Šless than the sum of the van de Waals radii of these atoms. A correlation of the rates of the reaction of {[Fe(tpena)OIPh]2}(4+) with para-substituted thioanisoles indicate that this species is a direct metal-based oxidant rather than a derived ferryl or perferryl complex. A study of gas-phase reactions indicate that an ion at m/z=231.06100 originates from solution-state {[Fe(tpena)OIPh]2}(4+) and is ascribed to [Fe(III) (tpenaO)](2+), derived from an intramolecular O atom insertion into an Fe-tpena donor bond. Proposed ion pairs, {[Fe(tpena)OIPh]Cl}(+) and {[Fe(tpena)OIPh]ClO4}(+), are more stable than native [Fe(tpena)OIPh](2+) ions, suggesting that halogen-bonding, as for the solution and solid states, operates also in the gas phase.

Longitudinal domain wall formation in elongated assemblies of ferromagnetic nanoparticles.

Through evaporation of dense colloids of ferromagnetic ~13 nm ε-Co particles onto carbon substrates, anisotropic magnetic dipolar interactions can support formation of elongated particle structures with aggregate thicknesses of 100-400 nm and lengths of up to some hundred microns. Lorenz microscopy and electron holography reveal collective magnetic ordering in these structures. However, in contrast to continuous ferromagnetic thin films of comparable dimensions, domain walls appear preferentially as longitudinal, i.e., oriented parallel to the long axis of the nanoparticle assemblies. We explain this unusual domain structure as the result of dipolar interactions and shape anisotropy, in the absence of inter-particle exchange coupling.

Reversible Guest Binding in a Non-Porous Fe(II) Coordination Polymer Host Toggles Spin Crossover.

Formation of either a dimetallic compound or a 1 D coordination polymer of adiponitrile adducts of [Fe(bpte)](2+) (bpte=[1,2-bis(pyridin-2-ylmethyl)thio]ethane) can be controlled by the choice of counteranion. The iron(II) atoms of the bis(adiponitrile)-bridged dimeric complex [Fe2 (bpte)2 (µ2 -(NC(CH2 )4 CN)2 ](SbF6 )4 (2) are low spin at room temperature, as are those in the polymeric adiponitrile-linked acetone solvate polymer {[Fe(bpte)(µ2 -NC(CH2 )4 CN)](BPh4 )2 ⋅Me2 CO} (3⋅Me2 CO). On heating 3⋅Me2 CO to 80 °C, the acetone is abruptly removed with an accompanying purple to dull lavender colour change corresponding to a conversion to a high-spin compound. Cooling reveals that the desolvate 3 shows hysteretic and abrupt spin crossover (SCO) S=0↔S=2 behaviour centred at 205 K. Non-porous 3 can reversibly absorb one equivalent of acetone per iron centre to regenerate the same crystalline phase of 3⋅Me2 CO concurrently reinstating a low-spin state.

Crystal structure and magnetism of Fe2(OH)[B2O4(OH)].

The structure and magnetism of Fe2(OH)[B2O4(OH)] are reported. Powder x-ray diffraction reveals a characteristic structure containing two crystallographically independent zigzag-ladder chains of magnetic Fe(2+) ions. Magnetization measurements reveal a phase transition at 85 K, below which a weak spontaneous magnetization (≈ 0.15 µB/Fe) appears. Below 85 K, magnetization increases with decreasing temperature down to 70 K, below which it decreases and approaches a constant value at low temperature. The Mössbauer spectrum at room temperature is composed of two paramagnetic doublets corresponding to the two crystallographic Fe(2+) sites. Below 85 K, each doublet undergoes further splitting because of the magnetic hyperfine fields. The temperature dependence of the hyperfine field is qualitatively different for the two distinguishable Fe(2+) sites. This is responsible for the anomalous temperature dependence of the magnetization.

Investigating processes of nanocrystal formation and transformation via liquid cell TEM.

Recent ex situ observations of crystallization in both natural and synthetic systems indicate that the classical models of nucleation and growth are inaccurate. However, in situ observations that can provide direct evidence for alternative models have been lacking due to the limited temporal and spatial resolution of experimental techniques that can observe dynamic processes in a bulk solution. Here we report results from liquid cell transmission electron microscopy studies of nucleation and growth of Au, CaCO3, and iron oxide nanoparticles. We show how these in situ data can be used to obtain direct evidence for the mechanisms underlying nanoparticle crystallization as well as dynamic information that provide constraints on important energetic parameters not available through ex situ methods.

Ultrafast electron and energy transfer in dye-sensitized iron oxide and oxyhydroxide nanoparticles.

An emerging area in chemical science is the study of solid-phase redox reactions using ultrafast time-resolved spectroscopy. We have used molecules of the photoactive dye 2',7'-dichlorofluorescein (DCF) anchored to the surface of iron(III) oxide nanoparticles to create iron(II) surface atoms via photo-initiated interfacial electron transfer. This approach enables time-resolved study of the fate and mobility of electrons within the solid phase. However, complete analysis of the ultrafast processes following dye photoexcitation of the sensitized iron(III) oxide nanoparticles has not been reported. We addressed this topic by performing femtosecond transient absorption (TA) measurements of aqueous suspensions of uncoated and DCF-sensitized iron oxide and oxyhydroxide nanoparticles, and an aqueous iron(III)-dye complex. Following light absorption, excited state relaxation times of the dye of 115-310 fs were found for all samples. Comparison between TA dynamics on uncoated and dye-sensitized hematite nanoparticles revealed the dye de-excitation pathway to consist of a competition between electron and energy transfer to the nanoparticles. We analyzed the TA data for hematite nanoparticles using a four-state model of the dye-sensitized system, finding electron and energy transfer to occur on the same ultrafast timescale. The interfacial electron transfer rates for iron oxides are very close to those previously reported for DCF-sensitized titanium dioxide (for which dye-oxide energy transfer is energetically forbidden) even though the acceptor states are different. Comparison of the alignment of the excited states of the dye and the unoccupied states of these oxides showed that the dye injects into acceptor states of different symmetry (Ti t2gvs. Fe eg).

In situ structural characterization of ferric iron dimers in aqueous solutions: identification of µ-oxo species.

The structure of ferric iron (Fe(3+)) dimers in aqueous solutions has long been debated. In this work, we have determined the dimer structure in situ in aqueous solutions using extended X-ray absorption fine structure (EXAFS) spectroscopy. An Fe K-edge EXAFS analysis of 0.2 M ferric nitrate solutions at pH 1.28-1.81 identified a Fe-Fe distance at ∼3.6 Å, strongly indicating that the dimers take the µ-oxo form. The EXAFS analysis also indicates two short Fe-O bonds at ∼1.80 Å and ten long Fe-O bonds at ∼2.08 Å, consistent with the µ-oxo dimer structure. The scattering from the Fe-Fe paths interferes destructively with that from paths belonging to Fe(OH2)6(3+) monomers that coexist with the dimers, leading to a less apparent Fe shell in the EXAFS Fourier transform. This might be a reason why the characteristic Fe-Fe distance was not detected in previous EXAFS studies. The existence of µ-oxo dimers is further confirmed by Mössbauer analyses of analogous quick frozen solutions. This work also explores the electronic structure and the relative stability of the µ-oxo dimer in a comparison to the dihydroxo dimer using density function theory (DFT) calculations. The identification of such dimers in aqueous solutions has important implications for iron (bio)inorganic chemistry and geochemistry, such as understanding the formation mechanisms of Fe oxyhydroxides at molecular scale.

An aqueous non-heme Fe(IV)oxo complex with a basic group in the second coordination sphere.

The Fe(IV)oxo complex of a coordinatively flexible multidentate mono-carboxylato ligand is obtained by the one electron oxidation of a low spin Fe(III) precursor in water.

Electron small polarons and their mobility in iron (oxyhydr)oxide nanoparticles.

Electron mobility within iron (oxyhydr)oxides enables charge transfer between widely separated surface sites. There is increasing evidence that this internal conduction influences the rates of interfacial reactions and the outcomes of redox-driven phase transformations of environmental interest. To determine the links between crystal structure and charge-transport efficiency, we used pump-probe spectroscopy to study the dynamics of electrons introduced into iron(III) (oxyhydr)oxide nanoparticles via ultrafast interfacial electron transfer. Using time-resolved x-ray spectroscopy and ab initio calculations, we observed the formation of reduced and structurally distorted metal sites consistent with small polarons. Comparisons between different phases (hematite, maghemite, and ferrihydrite) revealed that short-range structural topology, not long-range order, dominates the electron-hopping rate.