Eukaryotic yeast V1-ATPase rotary mechanism insights revealed by high-resolution single-molecule studies.

Vacuolar ATP-dependent proton pumps (V-ATPases) belong to a super-family of rotary ATPases and ATP synthases. The V1 complex consumes ATP to drive rotation of a central rotor that pumps protons across membranes via the Vo complex. Eukaryotic V-ATPases are regulated by reversible disassembly of subunit C, V1 without C, and VO. ATP hydrolysis is thought to generate an unknown rotary state that initiates regulated disassembly. Dissociated V1 is inhibited by subunit H that traps it in a specific rotational position. Here, we report the first single-molecule studies with high resolution of time and rotational position of Saccharomyces cerevisiae V1-ATPase lacking subunits H and C (V1ΔHC), which resolves previously elusive dwells and angular velocity changes. Rotation occurred in 120° power strokes separated by dwells comparable to catalytic dwells observed in other rotary ATPases. However, unique V1ΔHC rotational features included: 1) faltering power stroke rotation during the first 60°; 2) a dwell often occurring ∼45° after the catalytic dwell, which did not increase in duration at limiting MgATP; 3) a second dwell, ∼2-fold longer occurring 112° that increased in duration and occurrence at limiting MgATP; 4) limiting MgATP-dependent decreases in power stroke angular velocity where dwells were not observed. The results presented here are consistent with MgATP binding to the empty catalytic site at 112° and MgADP released at ∼45°, and provide important new insight concerning the molecular basis for the differences in rotary positions of substrate binding and product release between V-type and F-type ATPases.

F1FO ATP synthase molecular motor mechanisms.

The F-ATP synthase, consisting of F1 and FO motors connected by a central rotor and the stators, is the enzyme responsible for synthesizing the majority of ATP in all organisms. The F1 (αß)3 ring stator contains three catalytic sites. Single-molecule F1 rotation studies revealed that ATP hydrolysis at each catalytic site (0°) precedes a power-stroke that rotates subunit-γ 120° with angular velocities that vary with rotational position. Catalytic site conformations vary relative to subunit-γ position (ßE, empty; ßD, ADP bound; ßT, ATP-bound). During a power stroke, ßE binds ATP (0°-60°) and ßD releases ADP (60°-120°). Årrhenius analysis of the power stroke revealed that elastic energy powers rotation via unwinding the γ-subunit coiled-coil. Energy from ATP binding at 34° closes ßE upon subunit-γ to drive rotation to 120° and forcing the subunit-γ to exchange its tether from ßE to ßD, which changes catalytic site conformations. In F1FO, the membrane-bound FO complex contains a ring of c-subunits that is attached to subunit-γ. This c-ring rotates relative to the subunit-a stator in response to transmembrane proton flow driven by a pH gradient, which drives subunit-γ rotation in the opposite direction to force ATP synthesis in F1. Single-molecule studies of F1FO embedded in lipid bilayer nanodisks showed that the c-ring transiently stopped F1-ATPase-driven rotation every 36° (at each c-subunit in the c10-ring of E. coli F1FO) and was able to rotate 11° in the direction of ATP synthesis. Protonation and deprotonation of the conserved carboxyl group on each c-subunit is facilitated by separate groups of subunit-a residues, which were determined to have different pKa's. Mutations of any of any residue from either group changed both pKa values, which changed the occurrence of the 11° rotation proportionately. This supports a Grotthuss mechanism for proton translocation and indicates that proton translocation occurs during the 11° steps. This is consistent with a mechanism in which each 36° of rotation the c-ring during ATP synthesis involves a proton translocation-dependent 11° rotation of the c-ring, followed by a 25° rotation driven by electrostatic interaction of the negatively charged unprotonated carboxyl group to the positively charged essential arginine in subunit-a.

pH-dependent 11° F1FO ATP synthase sub-steps reveal insight into the FO torque generating mechanism.

Most cellular ATP is made by rotary F1FO ATP synthases using proton translocation-generated clockwise torque on the FO c-ring rotor, while F1-ATP hydrolysis can force counterclockwise rotation and proton pumping. The FO torque-generating mechanism remains elusive even though the FO interface of stator subunit-a, which contains the transmembrane proton half-channels, and the c-ring is known from recent F1FO structures. Here, single-molecule F1FO rotation studies determined that the pKa values of the half-channels differ, show that mutations of residues in these channels change the pKa values of both half-channels, and reveal the ability of FO to undergo single c-subunit rotational stepping. These experiments provide evidence to support the hypothesis that proton translocation through FO operates via a Grotthuss mechanism involving a column of single water molecules in each half-channel linked by proton translocation-dependent c-ring rotation. We also observed pH-dependent 11° ATP synthase-direction sub-steps of the Escherichia coli c10-ring of F1FO against the torque of F1-ATPase-dependent rotation that result from H+ transfer events from FO subunit-a groups with a low pKa to one c-subunit in the c-ring, and from an adjacent c-subunit to stator groups with a high pKa. These results support a mechanism in which alternating proton translocation-dependent 11° and 25° synthase-direction rotational sub-steps of the c10-ring occur to sustain F1FO ATP synthesis.

ΩqPCR measures telomere length from single-cells in base pair units.

ΩqPCR determines absolute telomere length in kb units from single cells. Accuracy and precision of ΩqPCR were assessed using 800 bp and 1600 bp synthetic telomeres inserted into plasmids, which were measured to be 819 ± 19.6 and 1590 ± 42.3 bp, respectively. This is the first telomere length measuring method verified in this way. The approach uses Ω-probes, a DNA strand containing sequence information that enables: (i) hybridization with the telomere via the 3' and 5' ends that become opposed; (ii) ligation of the hybridized probes to circularize the Ω-probes and (iii) circularized-dependent qPCR due to sequence information for a forward primer, and for a reverse primer binding site, and qPCR hydrolysis probe binding. Read through of the polymerase during qPCR occurs only in circularized Ω-probes, which quantifies their number that is directly proportional to telomere length. When used in concert with information about the cell cycle stage from a single-copy gene, and ploidy, the MTL of single cells measured by ΩqPCR was consistent with that obtained from large sample sizes by TRF.

SARS-CoV-2 and mitochondrial health: implications of lifestyle and ageing.

Infection with SARs-COV-2 displays increasing fatality with age and underlying co-morbidity, in particular, with markers of the metabolic syndrome and diabetes, which seems to be associated with a "cytokine storm" and an altered immune response. This suggests that a key contributory factor could be immunosenescence that is both age-related and lifestyle-induced. As the immune system itself is heavily reliant on mitochondrial function, then maintaining a healthy mitochondrial system may play a key role in resisting the virus, both directly, and indirectly by ensuring a good vaccine response. Furthermore, as viruses in general, and quite possibly this new virus, have also evolved to modulate immunometabolism and thus mitochondrial function to ensure their replication, this could further stress cellular bioenergetics. Unlike most sedentary modern humans, one of the natural hosts for the virus, the bat, has to "exercise" regularly to find food, which continually provides a powerful adaptive stimulus to maintain functional muscle and mitochondria. In effect the bat is exposed to regular hormetic stimuli, which could provide clues on how to resist this virus. In this paper we review the data that might support the idea that mitochondrial health, induced by a healthy lifestyle, could be a key factor in resisting the virus, and for those people who are perhaps not in optimal health, treatments that could support mitochondrial function might be pivotal to their long-term recovery.

Structural Asymmetry and Kinetic Limping of Single Rotary F-ATP Synthases.

F-ATP synthases use proton flow through the FO domain to synthesize ATP in the F1 domain. In Escherichia coli, the enzyme consists of rotor subunits γεc10 and stator subunits (αß)3δab2. Subunits c10 or (αß)3 alone are rotationally symmetric. However, symmetry is broken by the b2 homodimer, which together with subunit δa, forms a single eccentric stalk connecting the membrane embedded FO domain with the soluble F1 domain, and the central rotating and curved stalk composed of subunit γε. Although each of the three catalytic binding sites in (αß)3 catalyzes the same set of partial reactions in the time average, they might not be fully equivalent at any moment, because the structural symmetry is broken by contact with b2δ in F1 and with b2a in FO. We monitored the enzyme's rotary progression during ATP hydrolysis by three single-molecule techniques: fluorescence video-microscopy with attached actin filaments, Förster resonance energy transfer between pairs of fluorescence probes, and a polarization assay using gold nanorods. We found that one dwell in the three-stepped rotary progression lasting longer than the other two by a factor of up to 1.6. This effect of the structural asymmetry is small due to the internal elastic coupling.

Elastic coupling power stroke mechanism of the F1-ATPase molecular motor.

The angular velocity profile of the 120° F1-ATPase power stroke was resolved as a function of temperature from 16.3 to 44.6 °C using a ΔµATP = -31.25 kBT at a time resolution of 10 µs. Angular velocities during the first 60° of the power stroke (phase 1) varied inversely with temperature, resulting in negative activation energies with a parabolic dependence. This is direct evidence that phase 1 rotation derives from elastic energy (spring constant, κ = 50 kBT·rad-2). Phase 2 of the power stroke had an enthalpic component indicating that additional energy input occurred to enable the γ-subunit to overcome energy stored by the spring after rotating beyond its 34° equilibrium position. The correlation between the probability distribution of ATP binding to the empty catalytic site and the negative Ea values of the power stroke during phase 1 suggests that this additional energy is derived from the binding of ATP to the empty catalytic site. A second torsion spring (κ = 150 kBT·rad-2; equilibrium position, 90°) was also evident that mitigated the enthalpic cost of phase 2 rotation. The maximum ΔGǂ was 22.6 kBT, and maximum efficiency was 72%. An elastic coupling mechanism is proposed that uses the coiled-coil domain of the γ-subunit rotor as a torsion spring during phase 1, and then as a crankshaft driven by ATP-binding-dependent conformational changes during phase 2 to drive the power stroke.

Protonation-dependent stepped rotation of the F-type ATP synthase c-ring observed by single-molecule measurements.

The two opposed rotary molecular motors of the F0F1-ATP synthase work together to provide the majority of ATP in biological organisms. Rotation occurs in 120° power strokes separated by dwells when F1 synthesizes or hydrolyzes ATP. F0 and F1 complexes connect via a central rotor stalk and a peripheral stator stalk. A major unresolved question is the mechanism in which the interaction between subunit-a and rotating subunit-c-ring in the F0 motor uses the flux of H+ across the membrane to induce clockwise rotation against the force of counterclockwise rotation driven by the F1-ATPase. In single-molecule measurements of F0F1 embedded in lipid bilayer nanodiscs, we observed that the ability of the F0 motor to form transient dwells increases with decreasing pH. Transient dwells can halt counterclockwise rotation powered by the F1-ATPase in steps equivalent to the rotation of single c-subunits in the c-ring of F0, and can push the common axle shared by the two motors clockwise by as much as one c-subunit. Because the F0 proton half-channels that access the periplasm and the cytoplasm are exposed to the same pH, these data are consistent with the conclusion that the periplasmic half-channel is more easily protonated in a manner that halts ATPase-driven rotation by blocking ATPase-dependent proton pumping. The fit of transient dwell occurrence to the sum of three Gaussian curves suggests that the asymmetry of the three ATPase-dependent 120° power strokes imposed by the relative positions of the central and peripheral stalks affects c-subunit stepping efficiency.

The uniqueness of subunit α of mycobacterial F-ATP synthases: An evolutionary variant for niche adaptation.

The F1F0 -ATP (F-ATP) synthase is essential for growth of Mycobacterium tuberculosis, the causative agent of tuberculosis (TB). In addition to their synthase function most F-ATP synthases possess an ATP-hydrolase activity, which is coupled to proton-pumping activity. However, the mycobacterial enzyme lacks this reverse activity, but the reason for this deficiency is unclear. Here, we report that a Mycobacterium-specific, 36-amino acid long C-terminal domain in the nucleotide-binding subunit α (Mtα) of F-ATP synthase suppresses its ATPase activity and determined the mechanism of suppression. First, we employed vesicles to show that in intact membrane-embedded mycobacterial F-ATP synthases deletion of the C-terminal domain enabled ATPase and proton-pumping activity. We then generated a heterologous F-ATP synthase model system, which demonstrated that transfer of the mycobacterial C-terminal domain to a standard F-ATP synthase α subunit suppresses ATPase activity. Single-molecule rotation assays indicated that the introduction of this Mycobacterium-specific domain decreased the angular velocity of the power-stroke after ATP binding. Solution X-ray scattering data and NMR results revealed the solution shape of Mtα and the 3D structure of the subunit α C-terminal peptide 521PDEHVEALDEDKLAKEAVKV540 of M. tubercolosis (Mtα(521-540)), respectively. Together with cross-linking studies, the solution structural data lead to a model, in which Mtα(521-540) comes in close proximity with subunit γ residues 104-109, whose interaction may influence the rotation of the camshaft-like subunit γ. Finally, we propose that the unique segment Mtα(514-549), which is accessible at the C terminus of mycobacterial subunit α, is a promising drug epitope.

Power Stroke Angular Velocity Profiles of Archaeal A-ATP Synthase Versus Thermophilic and Mesophilic F-ATP Synthase Molecular Motors.

The angular velocities of ATPase-dependent power strokes as a function of the rotational position for the A-type molecular motor A3B3DF, from the Methanosarcina mazei Gö1 A-ATP synthase, and the thermophilic motor α3ß3γ, from Geobacillus stearothermophilus (formerly known as Bacillus PS3) F-ATP synthase, are resolved at 5 µs resolution for the first time. Unexpectedly, the angular velocity profile of the A-type was closely similar in the angular positions of accelerations and decelerations to the profiles of the evolutionarily distant F-type motors of thermophilic and mesophilic origins, and they differ only in the magnitude of their velocities. M. mazei A3B3DF power strokes occurred in 120° steps at saturating ATP concentrations like the F-type motors. However, because ATP-binding dwells did not interrupt the 120° steps at limiting ATP, ATP binding to A3B3DF must occur during the catalytic dwell. Elevated concentrations of ADP did not increase dwells occurring 40° after the catalytic dwell. In F-type motors, elevated ADP induces dwells 40° after the catalytic dwell and slows the overall velocity. The similarities in these power stroke profiles are consistent with a common rotational mechanism for A-type and F-type rotary motors, in which the angular velocity is limited by the rotary position at which ATP binding occurs and by the drag imposed on the axle as it rotates within the ring of stator subunits.

Fo-driven Rotation in the ATP Synthase Direction against the Force of F1 ATPase in the FoF1 ATP Synthase.

Living organisms rely on the FoF1 ATP synthase to maintain the non-equilibrium chemical gradient of ATP to ADP and phosphate that provides the primary energy source for cellular processes. How the Fo motor uses a transmembrane electrochemical ion gradient to create clockwise torque that overcomes F1 ATPase-driven counterclockwise torque at high ATP is a major unresolved question. Using single FoF1 molecules embedded in lipid bilayer nanodiscs, we now report the observation of Fo-dependent rotation of the c10 ring in the ATP synthase (clockwise) direction against the counterclockwise force of ATPase-driven rotation that occurs upon formation of a leash with Fo stator subunit a. Mutational studies indicate that the leash is important for ATP synthase activity and support a mechanism in which residues aGlu-196 and cArg-50 participate in the cytoplasmic proton half-channel to promote leash formation.

Anatomy of F1-ATPase powered rotation.

F1-ATPase, the catalytic complex of the ATP synthase, is a molecular motor that can consume ATP to drive rotation of the γ-subunit inside the ring of three αß-subunit heterodimers in 120° power strokes. To elucidate the mechanism of ATPase-powered rotation, we determined the angular velocity as a function of rotational position from single-molecule data collected at 200,000 frames per second with unprecedented signal-to-noise. Power stroke rotation is more complex than previously understood. This paper reports the unexpected discovery that a series of angular accelerations and decelerations occur during the power stroke. The decreases in angular velocity that occurred with the lower-affinity substrate ITP, which could not be explained by an increase in substrate-binding dwells, provides direct evidence that rotation depends on substrate binding affinity. The presence of elevated ADP concentrations not only increased dwells at 35° from the catalytic dwell consistent with competitive product inhibition but also decreased the angular velocity from 85° to 120°, indicating that ADP can remain bound to the catalytic site where product release occurs for the duration of the power stroke. The angular velocity profile also supports a model in which rotation is powered by Van der Waals repulsive forces during the final 85° of rotation, consistent with a transition from F1 structures 2HLD1 and 1H8E (Protein Data Bank).

Microsecond resolution of single-molecule rotation catalyzed by molecular motors.

Single-molecule measurements of rotation catalyzed by the F(1)-ATPase or the F(o)F(1) ATP synthase have provided new insights into the molecular mechanisms of the F(1) and F(o) molecular motors. We recently developed a method to record ATPase-driven rotation of F(1) or F(o)F(1) in a manner that solves several technical limitations of earlier approaches that were significantly hampered by time and angular resolution, and restricted the duration of data collection. With our approach it is possible to collect data for hours and obtain statistically significant quantities of data on each molecule examined with a time resolution of up to 5 µs at unprecedented signal-to-noise.

Padlock probe-mediated qRT-PCR for DNA computing answer determination.

Padlock probe-mediated quantitative real time PCR (PLP-qRT-PCR) was adapted to quantify the abundance of sequential 10mer DNA sequences for use in DNA computing to identify optimal answers of traveling salesman problems. The protocol involves: (i) hybridization of a linear PLP with a target DNA sequence; (ii) PLP circularization through enzymatic ligation; and (iii) qRT-PCR amplification of the circularized PLP after removal of non-circularized templates. The linear PLP was designed to consist of two 10-mer sequence-detection arms at the 5' and 3' ends separated by a core sequence composed of universal PCR primers, and a qRT-PCR reporter binding site. Circularization of each PLP molecule is dependent upon hybridization with target sequence and high-fidelity ligation. Thus, the number of PLP circularized is determined by the abundance of target in solution. The amplification efficiency of the PLP was 98.7% within a 0.2 pg-20 ng linear detection range between thermal cycle threshold (C(t) value) and target content. The C(t) values derived from multiplex qRT-PCR upon three targets did not differ significantly from those obtained with singleplex assays. The protocol provides a highly sensitive and efficient means for the simultaneous quantification of multiple short nucleic acid sequences that has a wide range of applications in biotechnology.

Direct observation of stepped proteolipid ring rotation in E. coli F0F1-ATP synthase.

Although single-molecule experiments have provided mechanistic insight for several molecular motors, these approaches have proved difficult for membrane bound molecular motors like the F0F1-ATP synthase, in which proton transport across a membrane is used to synthesize ATP. Resolution of smaller steps in F0 has been particularly hampered by signal-to-noise and time resolution. Here, we show the presence of a transient dwell between F0 subunits a and c by improving the time resolution to 10 µs at unprecedented S/N, and by using Escherichia coli F0F1 embedded in lipid bilayer nanodiscs. The transient dwell interaction requires 163 µs to form and 175 µs to dissociate, is independent of proton transport residues aR210 and cD61, and behaves as a leash that allows rotary motion of the c-ring to a limit of ∼36° while engaged. This leash behaviour satisfies a requirement of a Brownian ratchet mechanism for the F0 motor where c-ring rotational diffusion is limited to 36°.

Solving the fully-connected 15-city TSP using probabilistic DNA computing.

Implementation of DNA computers has lagged behind the theoretical advances due to several technical limitations. These limitations include the amount of DNA required, the efficiency and accuracy of methods to generate and purify answers, and the lack of a reliable method to read the answer. Here we show how to perform calculations using a reasonable amount of DNA with greater efficiency and accuracy and a new readout method that was used to successfully solve a problem with 15 vertices and 210 edges, the largest problem ever solved with DNA. These advances will provide new opportunities for DNA computing to perform practical computations that utilize the massively parallel nature of DNA hybridization.

Single molecule measurements of F1-ATPase reveal an interdependence between the power stroke and the dwell duration.

Increases in the power stroke and dwell durations of single molecules of Escherichia coli F(1)-ATPase were measured in response to viscous loads applied to the motor and inhibition of ATP hydrolysis. The load was varied using different sizes of gold nanorods attached to the rotating gamma subunit and/or by increasing the viscosity of the medium using PEG-400, a noncompetitive inhibitor of ATPase activity. Conditions that increase the duration of the power stroke were found to cause 20-fold increases in the length of the dwell. These results suggest that the order of hydrolysis, product release, and substrate binding may change as the result of external load on the motor or inhibition of hydrolysis.

WITHDRAWN: Microsecond resolution of enzymatic conformational changes using dark-field microscopy.

We report a novel method to detect angular conformational changes of a molecular motor in a manner sensitive enough to achieve acquisition rates with a time resolution of 2.5mus (equivalent to 400,000fps). We show that this method has sufficient sensitivity to resolve the velocity of the F(1)-ATPase gamma-subunit as it travels from one conformational state to another (transition time). Rotation is detected via a gold nanorod attached to the rotating gamma-subunit of an immobilized F(1)-ATPase. Variations in scattered light intensity allow precise measurement of changes in angular position of the rod below the diffraction limit of light.

Determination of torque generation from the power stroke of Escherichia coli F1-ATPase.

The torque generated by the power stroke of Escherichia coli F(1)-ATPase was determined as a function of the load from measurements of the velocity of the gamma-subunit obtained using a 0.25 micros time resolution and direct measurements of the drag from 45 to 91 nm gold nanorods. This result was compared to values of torque calculated using four different drag models. Although the gamma-subunit was able to rotate with a 20x increase in viscosity, the transition time decreased from 0.4 ms to 5.26 ms. The torque was measured to be 63+/-8 pN nm, independent of the load on the enzyme.

Single-molecule detection of DNA via sequence-specific links between F1-ATPase motors and gold nanorod sensors.

We report the construction of a novel biosensing nanodevice to detect single, sequence-specific target DNA molecules. Nanodevice assembly occurs through the association of an immobilized F1-ATPase molecular motor and a functionalized gold nanorod via a single 3',5'-dibiotinylated DNA molecule. Target-dependent 3',5'-dibiotinylated DNA bridges form by combining ligation and exonucleation reactions (LXR), with a specificity capable of selecting against a single nucleotide polymorphism (SNP). Using dark field microscopy to detect gold nanorods, quantitation of assembled nanodevices is sufficient to distinguish the presence of as few as 1800 DNA bridges from nonspecifically bound nanorods. The rotary mechanism of F1-ATPase can drive gold nanorod rotation when the nanorod is attached via the DNA bridge. Therefore, rotation discriminates fully assembled devices from nonspecifically bound nanorods, resulting in a sensitivity limit of one zeptomole (600 molecules).