Synthesis, Characterization, and Stability of Two Americium Vanadates, AmVO3 and AmVO4.

In search for chemically stable americium compounds with high power densities for radioisotope sources for space applications, AmVO3 and AmVO4 were prepared by a solid-state reaction. We present here their crystal structure at room temperature solved by powder X-ray diffraction combined with Rietveld refinement. Their thermal and self-irradiation stabilities have been studied. The oxidation states of americium were confirmed by the Am M5 edge high-resolution X-ray absorption near-edge structure (HR-XANES) technique. Such ceramics are investigated as potential power sources for space applications like radioisotope thermoelectric generators, and they have to endure extreme conditions including vacuum, high or low temperatures, and internal irradiation. Thus, their stability under self-irradiation and heat treatment in inert and oxidizing atmospheres was tested and discussed relative to other compounds with a high content of americium.

Synthesis and characterization of homogeneous (U,Am)O2 and (U,Pu,Am)O2 nanopowders.

This paper details the first dedicated production of homogeneous nanocrystalline particles of mixed actinide oxide solid solutions containing americium. The target compositions were U0.75Pu0.20Am0.05O2, U0.90Am0.10O2 and U0.80Am0.20O2. After successful hydrothermal synthesis and chemical characterisation, the nanocrystals were sintered and their structure and behaviour under self-irradiation were studied by powder XRD. Cationic charge distribution of the as-prepared nanocrystalline and sintered U0.80Am0.20O2 materials was investigated applying U M4 and Am M5 edge high energy resolution XANES (HR-XANES). Typical oxidation states detected for the cations are U(iv)/U(v) and Am(iii)/Am(iv). The measured crystallographic swelling was systematically smaller for the as-synthesised nanoparticles than the sintered products. For sintered pellets, the maximal volumetric swelling was about 0.8% at saturation, in line with literature data for PuO2, AmO2, (U,Pu)O2 or (U,Am)O2.

Synthesis, Characterization, and Stability of Americium Phosphate, AmPO4.

AmPO4 was prepared by a solid-state reaction method, and its crystal structure at room temperature was solved by powder X-ray diffraction combined with Rietveld refinement. The purity of the monazite-like phase was confirmed by spectroscopic (high-resolution solid-state 31P NMR and Raman) and microscopic (SEM-EDX and TEM) techniques. The thermal and self-irradiation stability have been studied. The compound is stable under argon and air atmosphere at least up to 1773 K. It remains crystalline under self-irradiation for circa two months, with a crystallographic volume swelling of ∼1.5%, and then is amorphizing over a year. However, microcrystals are present in the amorphous material even after a two year period of time. All these characteristics are discussed in relation to the potential application of AmPO4 as a stable form of Am in radioisotope power sources for space exploration and of behavior of the monazites under irradiation.

Plutonium and Americium Aluminate Perovskites.

Both AmAlO3 and PuAlO3 perovskites have been synthesized and characterized using powder X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), and 27Al magic angle spinning nuclear magnetic resonance spectroscopy (MAS NMR). AmAlO3 perovskite showed a rhombohedral configuration (space group R3̅c) in agreement with previous studies. The effect of americium α-decay on this material has been followed by XRD and 27Al MAS NMR analyses. In a first step, a progressive increase in the level of disorder in the crystalline phase was detected, associated with a significant crystallographic swelling of the material. In a second step, the crystalline AmAlO3 perovskite was progressively converted into amorphous AmAlO3, with a total amorphization occurring after 8 months and 2 × 1018 α-decays/g. For the first time, PuAlO3 perovskite was synthesized with an orthorhombic configuration (space group Imma), showing an interesting parallel to CeAlO3 and PrAlO3 lanthanide analogues. High-temperature XRD was performed and showed a Imma → R3̅c phase transition occurring between 473 and 573 K. The thermal behavior of R3̅c PuAlO3 was followed from 573 to 1273 K, and extrapolation of the data suggests that cubic plutonium perovskite should become stable at around 1850 K (R3̅c → Pm3̅m transition).

Optimization of Uranium-Doped Americium Oxide Synthesis for Space Application.

Americium 241 is a potential alternative to plutonium 238 as an energy source for missions into deep space or to the dark side of planetary bodies. In order to use the 241Am isotope for radioisotope thermoelectric generator or radioisotope heating unit (RHU) production, americium materials need to be developed. This study focuses on the stabilization of a cubic americium oxide phase using uranium as the dopant. After optimization of the material preparation, (Am0.80U0.12Np0.06Pu0.02)O1.8 has been successfully synthesized to prepare a 2.96 g pellet containing 2.13 g of 241Am for fabrication of a small scale RHU prototype. Compared to the use of pure americium oxide, the use of uranium-doped americium oxide leads to a number of improvements from a material properties and safety point of view, such as good behavior under sintering conditions or under alpha self-irradiation. The mixed oxide is a good host for neptunium (i.e., the 241Am daughter element), and it has improved safety against radioactive material dispersion in the case of accidental conditions.

On the Role of the Electrical Field in Spark Plasma Sintering of UO2+x.

The electric field has a large effect on the stoichiometry and grain growth of UO2+x during Spark Plasma Sintering. UO2+x is gradually reduced to UO2.00 as a function of sintering temperature and time. A gradient in the oxidation state within the pellets is observed in intermediate conditions. The shape of the gradient depends unequivocally on the direction of the electrical field. The positive surface of the pellet shows a higher oxidation state compared to the negative one. An area with larger grain size is found close to the positive electrode, but not in contact with it. We interpret these findings with the redistribution of defects under an electric field, which affect the stoichiometry of UO2+x and thus the cation diffusivity. The results bear implications for understanding the electric field assisted sintering of UO2 and non-stoichiometric oxides in general.