Retarding Ion Migration for Stable Blade-Coated Inverted Perovskite Solar Cells.

The fabrication of perovskite solar cells (PSCs) through blade coating is seen as one of the most viable paths toward commercialization. However, relative to the less scalable spin coating method, the blade coating process often results in more defective perovskite films with lower grain uniformity. Ion migration, facilitated by those elevated defect levels, is one of the main triggers of phase segregation and device instability. Here, a bifunctional molecule, p-aminobenzoic acid (PABA), which enhances the barrier to ion migration, induces grain growth along the (100) facet, and promotes the formation of homogeneous perovskite films with fewer defects, is reported. As a result, PSCs with PABA achieved impressive power conversion efficiencies (PCEs) of 23.32% and 22.23% for devices with active areas of 0.1 cm2 and 1 cm2 , respectively. Furthermore, these devices maintain 93.8% of their initial efficiencies after 1 000 h under 1-sun illumination, 75 °C, and 10% relative humidity conditions.

Progress of Photocapacitors.

In response to the current trend of miniaturization of electronic devices and sensors, the complementary coupling of high-efficiency energy conversion and low-loss energy storage technologies has given rise to the development of photocapacitors (PCs), which combine energy conversion and storage in a single device. Photovoltaic systems integrated with supercapacitors offer unique light conversion and storage capabilities, resulting in improved overall efficiency over the past decade. Consequently, researchers have explored a wide range of device combinations, materials, and characterization techniques. This review provides a comprehensive overview of photocapacitors, including their configurations, operating mechanisms, manufacturing techniques, and materials, with a focus on emerging applications in small wireless devices, Internet of Things (IoT), and Internet of Everything (IoE). Furthermore, we highlight the importance of cutting-edge materials such as metal-organic frameworks (MOFs) and organic materials for supercapacitors, as well as novel materials in photovoltaics, in advancing PCs for a carbon-free, sustainable society. We also evaluate the potential development, prospects, and application scenarios of this emerging area of research.

Emerging indoor photovoltaics for self-powered and self-aware IoT towards sustainable energy management.

As the number of Internet of Things devices is rapidly increasing, there is an urgent need for sustainable and efficient energy sources and management practices in ambient environments. In response, we developed a high-efficiency ambient photovoltaic based on sustainable non-toxic materials and present a full implementation of a long short-term memory (LSTM) based energy management using on-device prediction on IoT sensors solely powered by ambient light harvesters. The power is supplied by dye-sensitised photovoltaic cells based on a copper(ii/i) electrolyte with an unprecedented power conversion efficiency at 38% and 1.0 V open-circuit voltage at 1000 lux (fluorescent lamp). The on-device LSTM predicts changing deployment environments and adapts the devices' computational load accordingly to perpetually operate the energy-harvesting circuit and avoid power losses or brownouts. Merging ambient light harvesting with artificial intelligence presents the possibility of developing fully autonomous, self-powered sensor devices that can be utilized across industries, health care, home environments, and smart cities.

Ionic Accumulation as a Diagnostic Tool in Perovskite Solar Cells: Characterizing Band Alignment with Rapid Voltage Pulses.

Despite record-breaking devices, interfaces in perovskite solar cells are still poorly understood, inhibiting further progress. Their mixed ionic-electronic nature results in compositional variations at the interfaces, depending on the history of externally applied biases. This makes it difficult to measure the band energy alignment of charge extraction layers accurately. As a result, the field often resorts to a trial-and-error process to optimize these interfaces. Current approaches are typically carried out in a vacuum and on incomplete cells, hence values may not reflect those found in working devices. To address this, a pulsed measurement technique characterizing the electrostatic potential energy drop across the perovskite layer in a functioning device is developed. This method reconstructs the current-voltage (JV) curve for a range of stabilization biases, holding the ion distribution "static" during subsequent rapid voltage pulses. Two different regimes are observed: at low biases, the reconstructed JV curve is "s-shaped", whereas, at high biases, typical diode-shaped curves are returned. Using drift-diffusion simulations, it is demonstrated that the intersection of the two regimes reflects the band offsets at the interfaces. This approach effectively allows measurements of interfacial energy level alignment in a complete device under illumination and without the need for expensive vacuum equipment.

Conductivity in Thin Films of Transition Metal Coordination Complexes.

Two coordination complexes have been made by combining the dithiolene complexes [M(mnt)2]2- (mnt = maleonitriledithiolate; M = Ni2+ or Cu2+) as anion, with the copper(II) coordination complex [Cu(Stetra)] (Stetra = 6,6'-bis(4,5-dihydrothiazol-2-yl)-2,2'-bipyri-dine) as cation. The variation of the metal centers leads to a dramatic change in the conductivity of the materials, with the M = Cu2+ variant (Cu-Cu) displaying semiconductor behavior with a conductivity of approximately 2.5 × 10-8 S cm-1, while the M = Ni2+ variant (Ni-Cu) displayed no observable conductivity. Computational studies found Cu-Cu enables a minimization of reorganization energy losses and, as a result, a lower barrier to the charge transfer process, resulting in the reported higher conductivity.

Rapid and Facile Fabrication of Polyiodide Solid-State Dye-Sensitized Solar Cells Using Ambient Air Drying.

Dye-sensitized solar cells are promising candidates for low-cost indoor power generation applications. However, they currently suffer from complex fabrication and stability issues arising from the liquid electrolyte. Consequently, the so-called zombie cell was developed, in which the liquid electrolyte is dried out to yield a solid through a pinhole after cell assembly. We report a method for faster, simpler, and potentially more reliable production of zombie cells through direct and rapid drying of the electrolyte on the working electrode prior to cell assembly, using an iodide-triiodide redox couple electrolyte as a basis. These "rapid-zombie" cells were fabricated with power conversion efficiencies reaching 5.0%, which was larger than the 4.5% achieved for equivalent "slow" zombie cells. On a large-area cell of 15.68 cm2, over 2% efficiency was achieved at 0.2 suns. After 12 months of dark storage, the "rapid-zombie" cells were remarkably stable and actually showed a moderate increase in average efficiencies.

Assessment of TiO2 Blocking Layers for CuII/I-Electrolyte Dye-Sensitized Solar Cells by Electrochemical Impedance Spectroscopy.

The TiO2 blocking layer in dye-sensitized solar cells is the most difficult component to evaluate at thicknesses below 50 nm, but it is crucial for the power conversion efficiency. Here, the electrode capacitance of TiO2 blocking layers is tested in aqueous [Fe(CN)6]3-/4- and correlated to the performance of photoanodes in devices based on a [Cu(tmby)2]2+/+ electrolyte. The effects of the blocking layer on electronic recombination in the devices are illustrated with transient photovoltage methods and electrochemical impedance analysis. We have thus demonstrated a feasible and facile method to assess TiO2 blocking layers for the fabrication of dye-sensitized solar cells.

Dye-sensitized solar cells strike back.

Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.

Challenges and prospects of ambient hybrid solar cell applications.

The impending implementation of billions of Internet of Things and wireless sensor network devices has the potential to be the next digital revolution, if energy consumption and sustainability constraints can be overcome. Ambient photovoltaics provide vast universal energy that can be used to realise near-perpetual intelligent IoT devices which can directly transform diffused light energy into computational inferences based on artificial neural networks and machine learning. At the same time, a new architecture and energy model needs to be developed for IoT devices to optimize their ability to sense, interact, and anticipate. We address the state-of-the-art materials for indoor photovoltaics, with a particular focus on dye-sensitized solar cells, and their effect on the architecture of next generation IoT devices and sensor networks.

Dye-sensitized solar cells based on Fe N-heterocyclic carbene photosensitizers with improved rod-like push-pull functionality.

A new generation of octahedral iron(ii)-N-heterocyclic carbene (NHC) complexes, employing different tridentate C^N^C ligands, has been designed and synthesized as earth-abundant photosensitizers for dye sensitized solar cells (DSSCs) and related solar energy conversion applications. This work introduces a linearly aligned push-pull design principle that reaches from the ligand having nitrogen-based electron donors, over the Fe(ii) centre, to the ligand having an electron withdrawing carboxylic acid anchor group. A combination of spectroscopy, electrochemistry, and quantum chemical calculations demonstrate the improved molecular excited state properties in terms of a broader absorption spectrum compared to the reference complex, as well as directional charge-transfer displacement of the lowest excited state towards the semiconductor substrate in accordance with the push-pull design. Prototype DSSCs based on one of the new Fe NHC photosensitizers demonstrate a power conversion efficiency exceeding 1% already for a basic DSSC set-up using only the I-/I3 - redox mediator and standard operating conditions, outcompeting the corresponding DSSC based on the homoleptic reference complex. Transient photovoltage measurements confirmed that adding the co-sensitizer chenodeoxycholic acid helped in improving the efficiency by increasing the electron lifetime in TiO2. Time-resolved spectroscopy revealed spectral signatures for successful ultrafast (<100 fs) interfacial electron injection from the heteroleptic dyes to TiO2. However, an ultrafast recombination process results in undesirable fast charge recombination from TiO2 back to the oxidized dye, leaving only 5-10% of the initially excited dyes available to contribute to a current in the DSSC. On slower timescales, time-resolved spectroscopy also found that the recombination dynamics (longer than 40 µs) were significantly slower than the regeneration of the oxidized dye by the redox mediator (6-8 µs). Therefore it is the ultrafast recombination down to fs-timescales, between the oxidized dye and the injected electron, that remains as one of the main bottlenecks to be targeted for achieving further improved solar energy conversion efficiencies in future work.

Dye-sensitized solar cells under ambient light powering machine learning: towards autonomous smart sensors for the internet of things.

The field of photovoltaics gives the opportunity to make our buildings ''smart'' and our portable devices "independent", provided effective energy sources can be developed for use in ambient indoor conditions. To address this important issue, ambient light photovoltaic cells were developed to power autonomous Internet of Things (IoT) devices, capable of machine learning, allowing the on-device implementation of artificial intelligence. Through a novel co-sensitization strategy, we tailored dye-sensitized photovoltaic cells based on a copper(ii/i) electrolyte for the generation of power under ambient lighting with an unprecedented conversion efficiency (34%, 103 µW cm-2 at 1000 lux; 32.7%, 50 µW cm-2 at 500 lux and 31.4%, 19 µW cm-2 at 200 lux from a fluorescent lamp). A small array of DSCs with a joint active area of 16 cm2 was then used to power machine learning on wireless nodes. The collection of 0.947 mJ or 2.72 × 1015 photons is needed to compute one inference of a pre-trained artificial neural network for MNIST image classification in the employed set up. The inference accuracy of the network exceeded 90% for standard test images and 80% using camera-acquired printed MNIST-digits. Quantization of the neural network significantly reduced memory requirements with a less than 0.1% loss in accuracy compared to a full-precision network, making machine learning inferences on low-power microcontrollers possible. 152 J or 4.41 × 1020 photons required for training and verification of an artificial neural network were harvested with 64 cm2 photovoltaic area in less than 24 hours under 1000 lux illumination. Ambient light harvesters provide a new generation of self-powered and "smart" IoT devices powered through an energy source that is largely untapped.

Exploring the Optical and Electrochemical Properties of Homoleptic versus Heteroleptic Diimine Copper(I) Complexes.

Due to ligand scrambling, the synthesis and investigation of the properties of heteroleptic Cu(I) complexes can be a challenging task. In this work, we have studied the optical and electrochemical properties of a series of homoleptic complexes, such as [Cu(dbda)2]+, [Cu(dmp)2]+, [Cu(Br-dmp)2]+, [Cu(bcp)2]+, [Cu(dsbtmp)2]+, [Cu(biq)2]+, and [Cu(dap)2]+ in solution, and those of their heteroleptics [Cu(dbda)(dmp)]+, [Cu(dbda)(Br-dmp)]+, [Cu(dbda)(bcp)]+, [Cu(dbda)(dsbtmp)]+, [Cu(dbda)(biq)]+, [Cu(dbda)(dap)]+ adsorbed on the surface of anatase TiO2 (dbda = 6,6'-dimethyl-2,2'-bipyridine-4,4'-dibenzoic acid; dmp = 2,9-dimethyl-1,10-phenanthroline; Br-dmp = 5-bromo-2,9-dimethyl-1,10-phenanthroline; bcp = bathocuproine or 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline; dsbtmp = 2,9-di(sec-butyl)-3,4,7,8-tetramethyl-1,10-phenanthroline; biq = 2,2'-biquinoline; dap = 2,9-dianisyl-1,10-phenanthroline). We show that the maximum absorption wavelengths of the heteroleptic complexes on TiO2 can be reasonably predicted from those of the homoleptic complexes in solution through a simple linear relation, whereas the prediction of their redox properties is less trivial. In the latter case, two different linear patterns emerge: one including the ligands bcp, biq, and dap and another one including the ligands dmp, Br-dmp, and dsbtmp. We offer an interpretation of the data based on the chemical structure of the ligands. On one hand, ligands bcp, biq, and dap possess a more extended π-conjugated system, which gives a more prominent contribution to the overall redox properties of the ligand dbda. On the other hand, the ligands dmp, Br-dmp, and dsbtmp are all phenanthroline-based containing alkyl substituents and contribute less than dbda to the overall redox properties.

Planar Perovskite Solar Cells with High Open-Circuit Voltage Containing a Supramolecular Iron Complex as Hole Transport Material Dopant.

In perovskite solar cells (PSCs), the most commonly used hole transport material (HTM) is spiro-OMeTAD, which is typically doped by metalorganic complexes, for example, based on Co, to improve charge transport properties and thereby enhance the photovoltaic performance of the device. In this study, we report a new hemicage-structured iron complex, 1,3,5-tris(5'-methyl-2,2'-bipyridin-5-yl)ethylbenzene Fe(III)-tris(bis(trifluoromethylsulfonyl)imide), as a p-type dopant for spiro-OMeTAD. The formal redox potential of this compound was measured as 1.29 V vs. the standard hydrogen electrode, which is slightly (20 mV) more positive than that of the commercial cobalt dopant FK209. Photoelectron spectroscopy measurements confirm that the iron complex acts as an efficient p-dopant, as evidenced in an increase of the spiro-OMeTAD work function. When fabricating planar PSCs with the HTM spiro-OMeTAD doped by 5 mol % of the iron complex, a power conversion efficiency of 19.5 % (AM 1.5G, 100 mW cm-2 ) is achieved, compared to 19.3 % for reference devices with FK209. Open circuit voltages exceeding 1.2 V at 1 sun and reaching 1.27 V at 3 suns indicate that recombination at the perovskite/HTM interface is low when employing this iron complex. This work contributes to recent endeavors to reduce recombination losses in perovskite solar cells.

11% efficiency solid-state dye-sensitized solar cells with copper(II/I) hole transport materials.

Solid-state dye-sensitized solar cells currently suffer from issues such as inadequate nanopore filling, low conductivity and crystallization of hole-transport materials infiltrated in the mesoscopic TiO2 scaffolds, leading to low performances. Here we report a record 11% stable solid-state dye-sensitized solar cell under standard air mass 1.5 global using a hole-transport material composed of a blend of [Cu (4,4',6,6'-tetramethyl-2,2'-bipyridine)2](bis(trifluoromethylsulfonyl)imide)2 and [Cu (4,4',6,6'-tetramethyl-2,2'-bipyridine)2](bis(trifluoromethylsulfonyl)imide). The amorphous Cu(II/I) conductors that conduct holes by rapid hopping infiltrated in a 6.5 µm-thick mesoscopic TiO2 scaffold are crucial for achieving such high efficiency. Using time-resolved laser photolysis, we determine the time constants for electron injection from the photoexcited sensitizers Y123 into the TiO2 and regeneration of the Y123 by Cu(I) to be 25 ps and 3.2 µs, respectively. Our work will foster the development of low-cost solid-state photovoltaic based on transition metal complexes as hole conductors.

Copper Bipyridyl Redox Mediators for Dye-Sensitized Solar Cells with High Photovoltage.

Redox mediators play a major role determining the photocurrent and the photovoltage in dye-sensitized solar cells (DSCs). To maintain the photocurrent, the reduction of oxidized dye by the redox mediator should be significantly faster than the electron back transfer between TiO2 and the oxidized dye. The driving force for dye regeneration with the redox mediator should be sufficiently low to provide high photovoltages. With the introduction of our new copper complexes as promising redox mediators in DSCs both criteria are satisfied to enhance power conversion efficiencies. In this study, two copper bipyridyl complexes, Cu(II/I)(dmby)2TFSI2/1 (0.97 V vs SHE, dmby = 6,6'-dimethyl-2,2'-bipyridine) and Cu(II/I)(tmby)2TFSI2/1 (0.87 V vs SHE, tmby = 4,4',6,6'-tetramethyl-2,2'-bipyridine), are presented as new redox couples for DSCs. They are compared to previously reported Cu(II/I)(dmp)2TFSI2/1 (0.93 V vs SHE, dmp = bis(2,9-dimethyl-1,10-phenanthroline). Due to the small reorganization energy between Cu(I) and Cu(II) species, these copper complexes can sufficiently regenerate the oxidized dye molecules with close to unity yield at driving force potentials as low as 0.1 V. The high photovoltages of over 1.0 V were achieved by the series of copper complex based redox mediators without compromising photocurrent densities. Despite the small driving forces for dye regeneration, fast and efficient dye regeneration (2-3 µs) was observed for both complexes. As another advantage, the electron back transfer (recombination) rates were slower with Cu(II/I)(tmby)2TFSI2/1 as evidenced by longer lifetimes. The solar-to-electrical power conversion efficiencies for [Cu(tmby)2]2+/1+, [Cu(dmby)2]2+/1+, and [Cu(dmp)2]2+/1+ based electrolytes were 10.3%, 10.0%, and 10.3%, respectively, using the organic Y123 dye under 1000 W m-2 AM1.5G illumination. The high photovoltaic performance of Cu-based redox mediators underlines the significant potential of the new redox mediators and points to a new research and development direction for DSCs.

Supramolecular Hemicage Cobalt Mediators for Dye-Sensitized Solar Cells.

A new class of dye-sensitized solar cells (DSSCs) using the hemicage cobalt-based mediator [Co(ttb)]2+/3+ with the highly preorganized hexadentate ligand 5,5'',5''''-((2,4,6-triethyl benzene-1,3,5-triyl)tris(ethane-2,1-diyl))tri-2,2'-bipyridine (ttb) has been fully investigated. The performances of DSSCs sensitized with organic D-π-A dyes utilizing either [Co(ttb)]2+/3+ or the conventional [Co(bpy)3 ]2+/3+ (bpy=2,2'-bipyridine) redox mediator are comparable under 1000 W m-2 AM 1.5 G illumination. However, the hemicage complexes exhibit exceptional stability under thermal and light stress. In particular, a 120-hour continuous light illumination stability test for DSSCs using [Co(ttb)]2+/3+ resulted in a 10 % increase in the performance, whereas a 40 % decrease in performance was found for [Co(bpy)3 ]2+/3+ electrolyte-based DSSCs under the same conditions. These results demonstrate the great promise of [Co(ttb)]2+/3+ complexes as redox mediators for efficient, cost-effective, large-scale DSSC devices.

Fluorescence enhancement of di-p-tolyl viologen by complexation in cucurbit[7]uril.

A viologen derivative, 1,1'-di-p-tolyl-(4,4'-bipyridine)-1,1'-diium dichloride (DTV(2+)), was studied in solution and encapsulated in cucurbit[7]uril (CB7), a macrocyclic host. Upon encapsulation, DTV(2+) exhibited dramatically enhanced fluorescence. Aqueous solutions of DTV(2+) were weakly fluorescent (Φ = 0.01, τ < 20 ps), whereas the emission of the DTV(2+)@2CB7 complex was enhanced by 1 order of magnitude (Φ = 0.12, τ = 0.7 ns) and blue-shifted by 35 nm. Similar properties were observed in the presence of NaCl. DTV(2+) in a poly(methyl methacrylate) matrix was fluorescent with a spectrum similar to that observed for the complex in solution. (1)H NMR and UV-vis titrations indicated that the DTV(2+)@2CB7 complex is formed in aqueous solutions with complexation constants K(1) = (1.2 ± 0.3) × 10(4) M(-1) and K(2)= (1.0 ± 0.4) × 10(4) M(-1) in water. Density functional theory and configuration interaction singles calculations suggested that the hindrance of the rotational relaxation of the S(1) state of DTV(2+) caused by encapsulation within the host or a polymer matrix plays a key role in the observed emission enhancement. The absorption and emission spectra of DTV(2+)@2CB7 in water exhibited a large Stokes shift (ΔSt ~ 9000 cm(-1)) and no fine structure. DTV(2+) is a good electron acceptor [E°(DTV(2+)/DTV(•+)) = -0.30 V vs Ag/AgCl] and a strong photooxidant [E°(DTV*(2+)/DTV(•+)) = 0.09 V vs NHE]).

Photoinduced electron transfer across a molecular wall: coumarin dyes as donors and methyl viologen and TiO2 as acceptors.

Coumarins C-153, C-480, and C-1 formed 1:2 (guest:host) complexes with a water-soluble cavitand having eight carboxylic acid groups (OA) in aqueous borate buffer solution. The complexes were photoexcited in the presence of electron acceptors (methyl viologen, MV(2+), or TiO(2)) to probe the possibility of electron transfer between a donor and an acceptor physically separated by a molecular wall. In solution at basic pH, the dication MV(2+) was associated to the exterior of the complex C-153@OA(2), as suggested by diffusion constants (~1.2 × 10(-6) cm(2)/s) determined by DOSY NMR. The fluorescence of C-153@OA(2) was quenched in the presence of increasing amounts of MV(2+) and Stern-Volmer plots of I(o)/I and τ(o)/τ vs [MV(2+)] indicated that the quenching was static. As per FT-IR-ATR spectra, the capsule C-153@OA(2) was bound to TiO(2) nanoparticle films. Selective excitation (λ(exc) = 420) of the above bound complex resulted in fluorescence quenching. When adsorbed on insulating ZrO(2) nanoparticle films, excitation of the complex resulted in a broad fluorescence spectrum centered at 500 nm and consistent with C-153 being within the lipophilic capsule interior. Consistent with the above results, colloidal TiO(2) quenched the emission while colloidal ZrO(2) did not.

Cucurbituril complexes of viologens bound to TiO2 films.

Methylviologen (1,1'-dimethyl-4,4'-bipyridinium dichloride, MV(2+), 1) and a newly synthesized viologen derivative (1-methyl-1'-p-tolyl-4,4'-bipyridinium dichloride, MTV(2+), 2) were encapsulated in a macrocyclic host, cucur[7]bituril, CB[7]. The complexes MV(2+)@CB[7] and MTV(2+)@CB[7] were physisorbed on the surface of TiO(2) nanoparticles films. Viologens 1 or 2, which do not have anchoring group substituents, did not bind to the films in the absence of CB[7]. The complexation into CB[7] was monitored by (1)H NMR spectra in D(2)O solutions, which showed an upfield shift of the viologen protons upon encapsulation. TiO(2) films functionalized with the complexes were studied by FT-IR-ATR and UV-vis absorption. The electrochemical and spectroelectrochemical properties of MV(2+)@CB[7] and MTV(2+)@CB[7] were studied in solution and in electrochromic windows, where the complexes were bound to TiO(2) films cast on FTO. The windows prepared from MV(2+)@CB[7]/TiO(2)/FTO and MTV(2+)@CB[7]/TiO(2)/FTO electrodes showed reversible, sharp (colorless to purple), and fast color switching upon application of -0.8 V. Electrochromic behavior was not observed in control windows prepared in the absence of CB[7].