Comprehensive analysis of ordering in CoCrNi and CrNi2 alloys.

Chemical Short-Range Order (CSRO) has attracted recent attention from many researchers, creating intense debates about its impact on material properties. The challenges lie in confirming and quantifying CSRO, as its detection proves exceptionally demanding, contributing to conflicting data in the literature regarding its true effects on mechanical properties. Our work uses high-precision calorimetric data to unambiguously prove the existence and, coupled with atomistic simulations, quantify the type of CSRO. This methodology allows us to propose a mechanism for its formation and destruction based on the heat evolution during thermal analysis and facilitates a precise identification of local ordering in CoCrNi alloys. Samples of CoCrNi (Co33Cr33Ni33) and CrNi2 (Cr33Ni66) alloys are fabricated in varying ordered states, extensively characterized via synchrotron X-ray diffraction, X-ray absorption spectroscopy, and transmission electron microscopy. Samples with considerably different ordered states are submitted to tensile tests with in-situ synchrotron X-ray diffraction. We demonstrate, despite inducing varied CSRO levels in CoCrNi, no significant alterations in overall mechanical behavior emerge. However, the CrNi2 alloy, which undergoes long-range ordering, experiences significant shifts in yield strength, ultimate tensile stress and ductility.

Acetylsalicylic acid and dihydroartemisinin combined therapy on experimental malaria-associated acute lung injury: analysis of lung function and the inflammatory process.

BACKGROUND: Severe malaria can cause respiratory symptoms, which may lead to malaria-acute lung injury (MA-ALI) due to inflammation and damage to the blood-gas barrier. Patients with severe malaria also often present thrombocytopenia, and the use of acetylsalicylic acid (ASA), a commonly used non-steroidal anti-inflammatory drug with immunomodulatory and antiplatelet effects, may pose a risk in regions where malaria is endemic. Thus, this study aimed to investigate the systemic impact of ASA and dihydroartemisinin (DHA) on ALI induced in mice by Plasmodium berghei NK65 (PbNK65). METHODS: C57BL/6 mice were randomly divided into control (C) and PbNK65 infected groups and were inoculated with uninfected or 104 infected erythrocytes, respectively. Then, the animals were treated with DHA (3 mg/kg) or vehicle (DMSO) at the 8-day post-infection (dpi) for 7 days and with ASA (100 mg/kg, single dose), and analyses were performed at 9 or 15 dpi. Lung mechanics were performed, and lungs were collected for oedema evaluation and histological analyses. RESULTS: PbNK65 infection led to lung oedema, as well as increased lung static elastance (Est, L), resistive (ΔP1, L) and viscoelastic (ΔP2, L) pressures, percentage of mononuclear cells, inflammatory infiltrate, hemorrhage, alveolar oedema, and alveolar thickening septum at 9 dpi. Mice that received DHA or DHA + ASA had an increase in Est, L, and CD36 expression on inflammatory monocytes and higher protein content on bronchoalveolar fluid (BALF). However, only the DHA-treated group presented a percentage of inflammatory monocytes similar to the control group and a decrease in ΔP1, L and ΔP2, L compared to Pb + DMSO. Also, combined treatment with DHA + ASA led to an impairment in diffuse alveolar damage score and lung function at 9 dpi. CONCLUSIONS: Therapy with ASA maintained lung morpho-functional impairment triggered by PbNK65 infection, leading to a large influx of inflammatory monocytes to the lung tissue. Based on its deleterious effects in experimental MA-ALI, ASA administration or its treatment maintenance might be carefully reconsidered and further investigated in human malaria cases.

Accuracy and time efficiency of conventional and digital outlining of extensions of denture foundation on preliminary casts.

PURPOSE: The purpose of this diagnostic study was to assess the accuracy and time efficiency of a digital method to draw the denture foundation extension outline on preliminary casts compared with the conventional technique. MATERIALS AND METHODS: A total of 28 preliminary edentulous casts with no anatomical landmarks were digitized using a laboratory scanner. The outlining of the entire basal seat of the denture was performed on preliminary casts and digitized. Casts with no extension outline were digitized and outlines were drawn using software (DWOS, Straumann). The accuracy of the extension outlined between both techniques was evaluated in the software (GOM Inspect; GOM GmbH) by file superimposition. Specificity and sensitivity tests were applied to measure accuracy. The paired t-test (95% CI) was used to compare the mean total area and the working time. RESULTS: The accuracy ranged from 0.57 to 0.92. The buccal and labial frenulum showed a lower value in the maxilla (0.57); while the area between the retromolar pad and buccal frenulum (0.64) showed a lower score in the mandible. The maxillary denture foundation and the working time for both arches were significantly longer for the digital method (P < .001). CONCLUSION: The denture foundation extension outline exhibited a sufficiently excellent accuracy for the digital method, except for the maxillary anterior region. However, the digital method required a longer working time.

Contribuições dos grupos operativos da atenção básica a partir da visão dos usuários / Aportes de los grupos operativos de atención primaria desde la visión de los usuarios / Contributions of primary care operating groups from user perception

Os grupos em saúde nascem para fomentar práticas coletivas de saúde, tendo se expandido para a atenção básica, encontrando ressonância na promoção da saúde e da qualidade de vida. Baseados nas teorias de Pichon-Rivière e de Yalom e Leszcz, esses grupos são capazes de contribuir para mudanças significativas na qualidade de vida de seus usuários participantes. Este artigo tem como objetivo analisar as contribuições dos grupos operativos da atenção primária à saúde a partir da visão de seus usuários e compreender a operacionalização desses grupos. Trata-se de pesquisa descritiva e analítica de caráter qualitativo, realizada em quatro grupos operativos em saúde da atenção básica de um município do Rio Grande do Norte, no interior do semiárido nordeste brasileiro. Os dados foram coletados por questionário socioeconômico e grupos focais entre março e agosto de 2023, sendo utilizada estatística descritiva para os questionários e análise temática de conteúdo para os grupos focais. Os questionários revelaram um predomínio de participantes do sexo feminino, com faixa etária acima dos 60 anos e situação socioeconômica de baixa renda. A análise de conteúdo demonstrou a efetividade dos grupos em produzir vetores grupais e fatores terapêuticos, além de seu potencial, como campo para a educação popular em saúde, em fomentar as redes sociais, o apoio, o acolhimento e o bem-estar biopsicossocial. Os grupos em saúde são estratégias eficazes na promoção da saúde e na qualidade de vida. Entretanto, ressalta-se a necessidade de pesquisas que avaliem a eficácia global dos grupos nos processos de morbimortalidade.

Health care groups were created to promote collective health practices and were expanded into Primary Care, helping to promote health and quality of life. Based on the theories of Pichon-Rivière and Yalom and Lezscz, these groups can contribute to significant changes in the quality of life of their participating users. Thus, this article analyzes the contributions of Primary Health Care operating groups from users' perspective and understands their operationalization. A descriptive analytical qualitative research was conducted with four health operating groups in Primary Care from a municipality in Rio Grande do Norte, in the semi-arid northeastern Brazil. Data were collected by means of a socioeconomic questionnaire and focus groups between March and August 2023, and investigated using descriptive statistics (questionnaires) and thematic content analysis (focus groups). The questionnaires revealed a predominance of female participants over 60 years old and with low-income socioeconomic status. Content analysis showed the groups' effectiveness in producing group vectors and therapeutic factors, as well as their potential as a field for popular health education in fostering social networks, support, user embracement, and biopsychosocial well-being. Health groups are effective strategies for promoting health and quality of life, future research should evaluate their global effectiveness in morbidity and mortality.

Los grupos de salud se crearon para promover prácticas de salud colectiva y se expandieron a la atención primaria, repercutiendo en la promoción de la salud y la calidad de vida. Basados en las teorías de Pichon-Rivière y Yalom y Lezscz, los grupos son capaces de contribuir a cambios significativos en la calidad de vida de sus usuarios participantes. Este artículo tuvo por objetivo analizar las contribuciones de los grupos operativos de atención primaria de la salud desde la perspectiva de sus usuarios, así como comprender la operacionalización de estos grupos. Se trata de una investigación cualitativa, descriptiva y analítica, realizada en cuatro grupos operativos de salud en atención primaria de un municipio de Rio Grande do Norte (Brasil), en el interior de la región semiárida del Nordeste de Brasil. Los datos se recogieron de un cuestionario socioeconómico y de grupos focales en el período entre marzo y agosto de 2023, utilizando estadística descriptiva para los cuestionarios y análisis de contenido temático para los grupos focales. Los cuestionarios revelaron un predominio de los participantes del sexo femenino, mayores de 60 años y con nivel socioeconómico de bajos ingresos. El análisis de contenido demostró la eficacia de los grupos en la producción de vectores grupales y factores terapéuticos, además de su potencial como campo de educación popular en salud para fomentar redes sociales, apoyo, acogida y bienestar biopsicosocial. Los grupos de salud son estrategias efectivas para promover la salud y la calidad de vida. Sin embargo, se destaca la necesidad de investigaciones que evalúen la efectividad global de los grupos en los procesos de morbimortalidad.

Maxillomandibular relationship record methods for computer-engineered complete dentures: a scoping review.

OBJECTIVES: The purpose of this scoping review was to identify different methods employed for recording the maxillomandibular relationship (MMR) for computer-aided designed and manufactured (CAD-CAM) complete dentures (CDs). MATERIALS AND METHODS: This scoping review followed the PRISMA-ScR guidelines and was developed according to Arksey and O'Malley and The Joanna Briggs Institute protocol. The methods were registered on the Open Science Framework (< osf.io/rf4xm> ). The focus question was: "What are the different techniques for recording the maxillomandibular relationship in the digital workflow used in CECDs?" Two investigators searched 3 online databases [MEDLINE (PubMed), Scopus, and Science Direct] independently. The inclusion criteria were clinical studies and reviews that assessed techniques for recording MMR using digital workflow for manufacturing of CECDs. A descriptive analysis was performed considering the study design, manufacturing system, clinical steps, and tools for the determination of MMR, and the difficulty level of procedures. RESULTS: 4779 articles were identified in the electronic search and 10 studies were included for data analysis. The review identified 4 commercially available CAD-CAM denture systems and 3 innovative methods suitable for abbreviating the number of appointments (2 to 4 visits). The trial denture is inherent to the procedure for the Baltic System and 3 innovative techniques. Three techniques (2 innovative and WholeYouNexteeth) demonstrated lower difficulty levels for performing the clinical procedures, regardless of the professional skills. CONCLUSIONS: The commercially available and innovative techniques for the recording of MMR may provide predictability of the treatment. The techniques are effective, however, rely on the learning curve and the patient's clinical condition. CLINICAL RELEVANCE: Recording of the maxillomandibular relationship is paramount for the manufacturing and functionality of complete dentures. Clinicians should be aware of the different tools and techniques described for registering the jaw relationship.

Targeting bonding protocols to increase the bond between acrylic resin or 3D printed denture bases and prefabricated or 3D printed denture teeth.

STATEMENT OF PROBLEM: The difference in chemical composition between denture base resin and denture teeth requires the development of bonding protocols that increase the union between the materials. PURPOSE: The purpose of this in vitro study was to evaluate the impact of different bonding protocols on the bond between heat-polymerized and 3-dimensionally (3D) printed acrylic resin denture bases and acrylic resin prefabricated and 3D printed artificial teeth. MATERIAL AND METHODS: Four types of artificial teeth were evaluated: prefabricated acrylic resin (VITA MFT) and 3D printed (Cosmos TEMP, PRIZMA 3D Bio Denture, and PrintaX AA Temp) bonded to 20×24-mm cylinders of heat-polymerized (VipiWave) and 3D printed (Cosmos Denture, PRIZMA 3D Bio Denture, and PrintaX BB Base) denture bases. Three bonding protocols were tested (n=20): mechanical retention with perforation + monomer (PT1), mechanical retention with perforation + airborne-particle abrasion with 50-µm aluminum oxide + monomer (PT2), and mechanical retention with perforation + Palabond (PT3). Half of the specimens in each group received 10 000 thermocycles and were then subjected to the bonding test at a crosshead speed of 1 mm/minute. The failure type was analyzed and scanning electron micrographs made. Additionally, surface roughness (Ra) and wettability (degree) were analyzed (n=15). ANOVA was used to evaluate the effect of the bonding protocol, and the Student t test was applied to compare the experimental groups with the control (α=.05). For type of failure, a descriptive analysis was carried out using absolute and relative frequency. The Kruskal-Wallis test was used to evaluate the surface changes (α=.05). RESULTS: Among the protocols, PT3 with in Yller and PT2 with Prizma had the highest bond strengths of the heat-polymerized denture base and 3D printed teeth (P<.05). When comparing the experimental groups with the control, PT3 and PT2 had greater union with the 3D printed denture base + 3D printed teeth (in Yller), with no difference from the heat-polymerized denture base + prefabricated teeth in acrylic resin. The treatment of the 3D printed tooth surfaces affected the surface roughness of Prizma (P<.001) and wettability (P<.001). CONCLUSIONS: To increase the bond between Yller 3D printed denture base + 3D printed teeth, a bonding protocol including mechanical retention with perforation + Palabond or mechanical retention with perforation + airborne-particle abrasion with aluminum oxide + monomer is indicated. For the other materials tested, further bonding protocols need to be investigated.

Arboviruses epidemic associates with Guillain-Barré syndrome: temporal series in northeast Brazil / Epidemia de arboviroses associada à síndrome de Guillain-Barré: série temporal no nordeste brasileiro / Epidemia de arbovirosis asociada al síndrome de Guillain-Barré: serie temporal en el noreste de Brasil

Arboviruses cause public health problems in several countries, and records show that they can generate central and peripheral neurological complications with permanent sequelae. However, it is not certain which arbovirus is responsible for outbreaks of the Guillain-Barré Syndrome (GBS), especially in Brazil. Thus, the objective of this study is to verify if there is a coincidence between the GBS outbreak and the most common arboviruses in Northeastern Brazil, as well as their relationship. An ecological time series study was designed with the federative units of Northeastern Brazil, using hospitalizations for Guillain-Barré syndrome and notifications of arbovirus infections between 2014 and 2019 as a data source. Distribution incidence curves were constructed for the conditions studied, and generalized estimating equations (GEE) models were applied to estimate the relationship between arboviruses and Guillain-Barré. The results showed a similar distribution for the incidences of Chikungunya virus (z=7.82; p=0.001), Zika virus (z=3.69; p=0.03), and Guillain-Barré syndrome (z=2.98; p=0.05) from 2014 to 2019. The GEE model revealed that the distribution of Chikungunya incidence is associated with the distribution of GBS incidence in each year (x2Wald=3,969; p=0.046). This pattern was repeated in seven of the nine states, while the Zika virus had a significant relationship with GBS in only two states. The outbreak of GBS in Northeastern Brazil appears to be probabilistically related to outbreaks of the Chikungunya virus.

As arboviroses são problemas de saúde pública em vários países e há registros de que podem produzir complicações neurológicas centrais e periféricas com sequelas permanentes. Entretanto, não se sabe ao certo qual delas é realmente responsável pelos surtos da Síndrome de Guillain-Barré (SGB), principalmente no Brasil. Assim, o objetivo é verificar se há coincidência entre o surto de SGB e as arboviroses mais comuns no Nordeste do Brasil e suas relações. Foi desenhado um estudo ecológico de série temporal com as unidades federativas do Nordeste do Brasil, adotando como fonte de dados as internações Guillain-Barré e as notificações de infecções por arbovírus entre 2014 e 2019. Curvas de distribuição de incidência foram construídas para as condições estudadas, e foram aplicados modelos de equações generalizadas estimadas (GEE) para estimar a relação entre arbovírus e Guillain-Barré. Evidencia-se que há distribuição semelhante para as incidências do vírus Chikungunya (z=7,82; p=0,001), vírus Zika (z=3,69; p=0,03) e síndrome de Guillain-Barré (z=2,98; p=0,05) entre 2014 e 2019. O modelo GEE revelou que a distribuição da incidência de Chikungunya está associada à distribuição da incidência de SGB em cada ano (x2Wald=3,969; p=0,046). Esse padrão se repetiu em sete dos nove estados, enquanto o zika vírus teve uma relação significativa com o GBS em apenas dois estados. Conclui-se, então, que o surto de SGB no Nordeste do Brasil parece estar probabilisticamente relacionado aos surtos do vírus Chikungunya.

Los arbovirus causan problemas de salud pública en varios países y, según indican los reportes, pueden producir complicaciones neurológicas centrales y periféricas con secuelas permanentes. Sin embargo, no se sabe cuál de ellos es realmente el responsable de los brotes del síndrome de Guillain-Barré (SGB), especialmente en Brasil. Así, el objetivo de este estudio es verificar si existen coincidencias entre el brote del SGB y los arbovirus más comunes en el Noreste de Brasil y sus asociaciones. Se diseñó un estudio de series temporales ecológico en las unidades federativas del Noreste de Brasil, adoptando como fuente de datos las hospitalizaciones y las notificaciones de arbovirosis de Guillain-Barré entre 2014 y 2019. Se construyeron curvas de distribución de incidencia para las condiciones científicas, y se aplicó una ecuación estimada generalizada (GEE) para estimar la relación entre arbovirus y Guillain-Barré. Se encontró que existe una distribución similar en las incidencias de virus del chikunguña (z=7,82; p=0,001), virus del Zika (z=3,69; p=0,03) y síndrome de Guillain-Barré (z =2,98; p=0,05) entre 2014 y 2019. El modelo GEE reveló que la distribución de la incidencia de chikunguña está asociada con la distribución de la incidencia de SGB en cada año (x2Wald=3,969; p=0,046). Este patrón se repitió en siete de los nueve estados, mientras que el virus del Zika presentó una relación significativa con el SGB en solo dos estados. El brote del SGB en el Noreste de Brasil parece estar relacionado probabilísticamente con los brotes del virus del chikunguña.

Effects of Calendula officinalis extract on liver histopathology, lipid profile, and oxidative stress in rats submitted to a diet rich in cholesterol and carbohydrates.

PURPOSE: To evaluate the modulatory properties of Calendula officinalis L. (Asteraceae) (C. officinalis) extract on cafeteria diet-fed rats. METHODS: A cafeteria diet was administered ad libitum for 45 days to induce dyslipidemia. Then, the rats were treated with the formulations containing C. officinalis in the doses of 50, 100, and 150 mg/kg or only with the vehicle formulation; the control group received a commercial ration. RESULTS: The cafeteria diet decreased glutathione S-transferase activity and high-density lipoprotein plasmatic levels and damaged the hepatic architecture. The C. officinalis extract was able to reduce lipid infiltration in liver tissue and to modulate oxidative stress and lipid profile markers. CONCLUSIONS: The correlations between the variables suggest a pathological connection between oxidative stress markers and serum lipid profile.

Flexural strength, surface roughness, micro-CT analysis, and microbiological adhesion of a 3D-printed temporary crown material.

OBJECTIVE: To evaluate the thermocycling effect of 3D-printed resins on flexural strength, surface roughness, microbiological adhesion, and porosity. MATERIALS AND METHODS: 150 bars (8 × 2 × 2 mm) and 100 blocks (8 × 8 × 2 mm) were made and divided into 5 groups, according to two factors: "material" (AR: acrylic resin, CR: composite resin, BIS: bis-acryl resin, CAD: CAD/CAM resin, and PRINT: 3D-printed resin) and "aging" (non-aged and aged - TC). Half of them were subjected to thermocycling (10,000 cycles). The bars were subjected to mini-flexural strength (σ) test (1 mm/min). All the blocks were subjected to roughness analysis (Ra/Rq/Rz). The non-aged blocks were subjected to porosity analysis (micro-CT; n = 5) and fungal adherence (n = 10). Data were statistically analyzed (one-way ANOVA, two-way ANOVA; Tukey's test, α = 0.05). RESULTS: For σ, "material" and "aging" factors were statistically significant (p < 0.0001). The BIS (118.23 ± 16.26A) presented a higher σ and the PRINT group (49.87 ± 7.55E) had the lowest mean σ. All groups showed a decrease in σ after TC, except for PRINT. The CRTC showed the lowest Weibull modulus. The AR showed higher roughness than BIS. Porosity revealed that the AR (1.369%) and BIS (6.339%) presented the highest porosity, and the CAD (0.002%) had the lowest porosity. Cell adhesion was significantly different between the CR (6.81) and CAD (6.37). CONCLUSION: Thermocycling reduced the flexural strength of most provisional materials, except for 3D-printed resin. However, it did not influence the surface roughness. The CR showed higher microbiological adherence than CAD group. The BIS group reached the highest porosity while the CAD group had the lowest values. CLINICAL RELEVANCE: 3D-printed resins are promising materials for clinical applications because they have good mechanical properties and low fungal adhesion.

Oficina de formação bioética para a Estratégia Saúde da Família: perspectivas e olhares dos diferentes atores acerca dos cenários, montagem e espetáculo / Bioethics Training Workshop for Family Health Strategy: perspectives of the different players about scenarios, setup and show / Taller de formación en bioética para la estrategia salud de la familia: perspectivas y miradas de los diferentes actores sobre los escenarios, montaje y espectáculo

A formação dos profissionais de saúde segue em discussão há tempos ­ no Brasil e no mundo ­, assim como as mudanças dos paradigmas sanitários e dos modelos de cuidado em saúde. Com a criação do Sistema Único de Saúde e a implantação da Estratégia de Saúde da Família (ESF) como reorganizadores da atenção em saúde, brotam, neste cenário, questões e problemas bioéticos não vividos anteriormente no âmbito da prática de saúde hospitalar. Este artigo apresenta os resultados da realização de uma oficina de formação em bioética com a participação de 130 pessoas (128 profissionais da ESF no município de Viçosa, Minas Gerais, e dois convidados), promovida pela integração da universidade com o serviço de saúde local. Os referenciais utilizados incluíram o pluralismo metodológico, o trabalho em pequenos grupos, a aprendizagem significativa e o uso da arte para a construção das competências em bioética. Os resultados verificados foram otimistas quanto à efetividade da ação, tanto na ótica dos profissionais da ESF quanto dos participantes (facilitadores e docentes envolvidos), promovendo-se uma construção coletiva de saberes para a práxis.

The training of health professionals has been a point of discussion for a long time in Brazil and around the world, as well as changes in health paradigms and health care models. With the merger of the National Health System and the implementation of the Family Health Strategy (FHS) as organizer of health care, issues and problems emerged, which were not previously thought about in the context of health and hospital practice, mainly reflections on ethical and bioethical aspects. This paper presents the results of conducting a training workshop on bioethics with the participation of 130 people (128 FHS professionals in Viçosa, Minas Gerais and two guests), sponsored by the university's integration with the local health service, based on the use of methodological pluralism, small group work, learning and meaningful use of art for the construction of expertise in bioethics. Actual outcomes were optimistic about the effectiveness of the action, from the viewpoint of both the FHS professionals and participants (facilitators and professors involved), promoting a collective construction of knowledge for practice.

La formación de los profesionales de la salud es objeto de debate desde hace mucho tiempo - en Brasil y en el mundo -, así como los cambios de paradigmas y modelos de salud para el cuidado de la salud. Con la creación del Sistema Único de Salud (SUS) y de la aplicación de la Estrategia Salud de la Familia (ESF) como de reorganizadores cuidado de la salud, surgen, en este escenario, los problemas y las cuestiones de bioética que no se vivieron dentro de la práctica de la salud del hospital. Este artículo presenta los resultados de la realización de una capacitación sobre la bioética con la participación de 130 personas (128 profesionales de la ESF en Viçosa, Minas Gerais y dos invitados), promovido por la integración de la universidad con el servicio de salud local. Los puntos de referencia utilizados incluyen el pluralismo metodológico, el trabajo en pequeños grupos, el aprendizaje significativo y el uso del arte para la construcción de capacidades en bioética. Los resultados observados se mostraron optimistas acerca de la efectividad de la acción, tanto desde el punto de vista de los profesionales de la ESF, y los participantes (facilitadores y profesores involucrados), la promoción de una construcción colectiva de conocimiento a la práctica.

Partially digital workflow for making complete-arch implant-supported fixed prostheses: A dental technique.

This article describes a technique for making complete-arch implant-supported fixed prostheses by using intraoral scanning and computer-aided design and computer-aided manufacturing (CAD-CAM) technology for the fabrication of a metal substructure and conventional processing for the prosthesis base. For this, a device was designed to accurately capture the position of multiple implants and the associated digitalized surgical guide, and the metal substructure was planned and milled directly in cobalt-chromium. The color of the gingiva and artificial teeth was selected by using the intraoral scanner software program, and the prosthesis base was processed conventionally. The straightforward methods used to fabricate the prostheses eliminated possible errors associated with conventional substructure casting and occlusal registration.

Workflow for complete dentures fabrication in three appointments: A dental technique.

This technical report describes a novel workflow for complete denture fabrication designed to abbreviate the necessary steps for dental prostheses delivery by using a 3-appointment protocol in which preliminary impressions are made in the first session together with the registration of maxillary lip support, occlusal plane, and reference lines for tooth arrangement. A trial denture is fabricated with conventional or computer-aided design and computer-aided manufacturing procedures and is evaluated in the second appointment for esthetics, the definitive impression, and the maxillomandibular relationship record to provide precise references for definitive denture fabrication.

Physical, Mechanical, and Anti-Biofilm Formation Properties of CAD-CAM Milled or 3D Printed Denture Base Resins: In Vitro Analysis.

PURPOSE: To investigate surface characteristics (roughness and contact angle), anti-biofilm formation, and mechanical properties (mini-flexural strength) of computer-aided design and computer-aided manufacturing (CAD-CAM) polymethylmethacrylate (PMMA) polymer, and three-dimensional (3D) printed resin for denture base fabrication compared with conventional heat polymerized denture base resins. MATERIALS AND METHODS: A total of 60 discs and 40 rectangular specimens were fabricated from one CAD-CAM (AvaDent), one 3D printed (Cosmos Denture), and two conventional heat polymerized (Lucitone 199 and VipiWave) materials for denture base fabrication. Roughness was determined by Ra value; the contact angle was measured by the sessile drop method. The biofilm formation inhibition behavior was analyzed through Candida albicans adhesion, while mini-flexural strength test was done using a three-point bending test. The data were analyzed using descriptive and analytical statistics (α = 0.05). RESULTS: The CAD-CAM PMMA group showed the lowest C. albicans adhesion (log CFU/mL: 3.74 ± 0.57) and highest mini-flexural strength mean (114.96 ± 16.23 MPa). 3D printed specimens presented the highest surface roughness (Ra: 0.317 ± 0.151 µm) and lowest mini-flexural strength values (57.23 ± 9.07 MPa). However, there was no statistical difference between CAD-CAM PMMA and conventional groups for roughness, contact angle, and mini-flexural strength. CONCLUSIONS: CAD-CAM milled materials present surface and mechanical properties similar to conventional resins and show improved behavior in preventing C. albicans adhesion. Nevertheless, 3D printed resins present decreased mini-flexural strength.

Elements of interprofessional education in the curriculum of multiprofessional residency programs in health: a documentary study / Elementos de la educación interprofesional en los planes de estudios de los programas de residencia multiprofesionales en salud: estudio documental / Elementos da educação interprofissional no currículo das residências multiprofissionais em saúde: estudo documental

ABSTRACT Objective: to examine the interprofessional education elements present in the integrated curricula of the Multiprofessional Residency Programs in Health in the cities from inland Rio Grande do Norte. Method: a documentary research study based on the analysis of three Pedagogical Course Projects with a quantitative approach. The data were extracted with the aid of an adapted instrument, processed in the Iramuteq software, presented in charts and in a dendrogram and analyzed by thematic categories and interpretively. Results: the text corpus was built from the organization of all the information through the adapted instrument and subsequently analyzed in Iramuteq through Descending Hierarchical Classification. The emergence of two main classes was identified: Class 3, which was subdivided into classes 1 and 2; and Class 4. From the keywords found in the dendrogram corresponding to each Class and their statistical similarity, it was possible to organize the classes into analysis categories, as follows: Class 3 - Interprofessional Education: Actors, contexts and strategies; and Class 4 - Methodological and evaluative strategies for building interprofessional competencies and skills. Through the Pedagogical Course Projects, a training process that values the development of competencies for teamwork, interprofessional and comprehensive care is indicated, based on the guiding principles of interprofessional education. Conclusion: there is an effort by the pedagogical projects to point to an integrated curriculum based on Interprofessional Education since, in their theoretical framework, they contribute fundamental principles for developing the teaching-learning process.

RESUMEN Objetivo: examinar los elementos de la educación interprofesional presentes en los planes de estudios integrados de los Programas de Residencia Multiprofesionales en Salud en las ciudades del interior do Rio Grande do Norte. Método: investigación documental a partir del análisis de tres Proyectos Pedagógicos de Carreras Universitarias con enfoque cuantitativo. Los datos se extrajeron con la ayuda de un instrumento adaptado, se los procesó en el programa de software Iramuteq, se presentaron en forma de cuadros y de dendrograma y se los analizó por categorías temáticas y en forma interpretativa. Resultados: el corpus de texto se elaboró a partir de organizar toda la información en el instrumento adaptado e, inmediatamente después, se lo analizó en Iramuteq por medio de Clasificación Jerárquica Descendente. Se identificaron dos clases principales: a Clase 3, que se subdividió en las clases 1 y 2; y Clase 4. A partir de las palabras clave presentes en el dendrograma de cada Clase y su similitud estadística, fue posible organizar las clases en categorías de análisis, a saber: Clase 3 - Educación interprofesional: Actores, contextos y estrategias; y Clase 4 - Estrategias metodológicas y evaluativas para desarrollar competencias y habilidades interprofesionales. A través de los Proyectos Pedagógicos de Carreras Universitarias, se señala un proceso formativo que valoriza el desarrollo de competencias para trabajo en equipo, interprofesional y cuidado integral, a partir de principios guía de la educación interprofesional. Conclusión: los proyectos pedagógicos se esfuerzan por indicar el camino a un plan de estudios integrado y fundamentado en la Educación Interprofesional, puesto que incluyen principios fundamentales para desarrollar el proceso de en enseñanza-aprendizaje en su marco teórico.

RESUMO Objetivo: examinar os elementos da educação interprofissional presentes nos currículos integrados das Residências Multiprofissionais em Saúde nas cidades do interior do Rio Grande do Norte. Método: pesquisa documental a partir da análise de três Projetos Pedagógicos de Curso com abordagem quantitativa. Os dados foram coletados de novembro de 2022 a janeiro de 2023 e extraídos com auxílio de um instrumento adaptado, processados no software Iramuteq, apresentados em quadros, dendograma e analisados por categorias temáticas e interpretativamente. Resultados: o corpus textual foi construído a partir da organização das informações através do instrumento adaptado e, logo após, analisado no Iramuteq por meio de Classificação Hierárquica Descendente. Identificou-se o surgimento de duas classes principais: a Classe 3, que se subdividiu em classe 1 e 2; e a Classe 4. A partir das palavras-chaves presentes no dendrograma de cada Classe e sua similaridade estatística, foi possível organizar as classes em categorias de análises, sendo: Classe 3 - Educação interprofissional: Atores, contextos e estratégias; e Classe 4 - Estratégias metodológicas e avaliativas para a construção de competências e habilidades interprofissionais. Indica-se, através dos Projetos Pedagógicos de Curso, um processo formativo que valoriza a construção de competências para um trabalho em equipe, interprofissional e cuidado integral, a partir de princípios norteadores da educação interprofissional. Conclusão: há um esforço dos projetos pedagógicos em apontar para um currículo integrado fundamentado em Educação Interprofissional, visto que trazem, em seu arcabouço teórico, princípios fundamentais para o desenvolvimento do processo ensino-aprendizagem.

Effects of Calendula officinalis extract on liver histopathology, lipid profile, and oxidative stress in rats submitted to a diet rich in cholesterol and carbohydrates

Purpose: To evaluate the modulatory properties of Calendula officinalis L. (Asteraceae) (C. officinalis) extract on cafeteria diet-fed rats. Methods: A cafeteria diet was administered ad libitum for 45 days to induce dyslipidemia. Then, the rats were treated with the formulations containing C. officinalis in the doses of 50, 100, and 150 mg/kg or only with the vehicle formulation; the control group received a commercial ration. Results: The cafeteria diet decreased glutathione S-transferase activity and high-density lipoprotein plasmatic levels and damaged the hepatic architecture. The C. officinalis extract was able to reduce lipid infiltration in liver tissue and to modulate oxidative stress and lipid profile markers. Conclusions: The correlations between the variables suggest a pathological connection between oxidative stress markers and serum lipid profile.

Conhecimento e prática de enfermeiros da Atenção Primária sobre gênero e assistência às pessoas LGBTQIA+ / Knowledge and practice of primary care nurses about gender and care for LGBTQIA+ people

RESUMO Objetivo compreender o conhecimento e a prática de enfermeiros da Atenção Primária à Saúde sobre gênero e assistência às pessoas LGBTQIA+. Métodos estudo qualitativo, realizado com nove enfermeiros da Atenção Primária à Saúde. Os dados foram coletados mediante entrevista semiestruturada e submetidos à Análise de Conteúdo Temática. Resultados emergiram três categorias: conhecimento sobre gênero e população LGBTQIA+; percepção sobre a Política Nacional de Saúde Integral LGBT; e procura pelos serviços e assistência de enfermagem ao público LGBTQIA+. Conclusão evidenciou-se um conhecimento deficiente sobre gênero e saúde da população LGBTQIA+. Há um despreparo dos profissionais que assistem esses usuários, o que provoca barreiras de acesso à assistência e aos serviços, devido ao desconhecimento da existência da política nacional de saúde integral dessa população. Os enfermeiros se centram em ações pontuais e biologicistas. Contribuições para a prática: os achados contribuem para subsidiar o pensar/fazer da enfermagem a respeito das populações vulneráveis, que necessitam de um olhar equânime, integral e humanizado. É necessário fortalecer as discussões na formação em saúde e na educação permanente, para ampliar o conhecimento sobre gênero, o acesso da população LGBTQIA+ aos serviços e a consolidação das ações da política nacional de saúde destinadas a esse grupo populacional.

ABSTRACT Objective to understand the knowledge and practice of Primary Health Care nurses about gender and assistance to LGBTQIA+ people. Methods qualitative study, conducted with nine nurses from Primary Health Care. Data were collected through semi-structured interviews and submitted to Thematic Content Analysis. Results three categories emerged: knowledge about gender and the LGBTQIA+ population; perception of the National LGBT Comprehensive Health Policy; and demand for services and nursing care for the LGBTQIA+ public. Conclusion it was evidenced deficient knowledge about gender and health of the LGBTQIA+ population. There is a lack of preparation of the professionals who assist these users, which causes barriers to access to care and services, due to the lack of knowledge about the existence of the national policy of integral health of this population. Nurses focus on punctual and biologist actions. Contributions to practice: the findings contribute to subsidize the thinking/doing of nursing regarding vulnerable populations, who need an equitable, integral, and humanized look. It is necessary to strengthen discussions in health training and continuing education to expand knowledge about gender, the access of the LGBTQIA+ population to services and the consolidation of the actions of the national health policy aimed at this population group.

CAD/CAM technology for fabrication of reduction guide for RPD parallel guiding planes preparation: A dental technique.

INTRODUCTION: The preparation of parallel axial wall guide planes in abutment teeth is essential for providing a correct path of insertion and removal axis for removable partial dentures (RPDs). With the introduction of digital resources, new alternatives to the conventional method can be used to manufacture guide preparation for guide planes. AIMS: To describe the use of computer-aided design/computer-aided manufacturing (CAD/CAM) technology for the manufacture of guide planes to guide the reduction of the axial walls of abutment teeth according to the insertion and removal axis of the RPD. METHODS: This technique used the "bite splint" module of the Dental Wings software for the virtual planning of guide planes, to promote the construction of axial walls parallel to the abutment teeth. This was performed from the virtual design on a standard tessellation language (STL) file obtained by intraoral scanning, which determined the best trajectory for insertion and removal of the metallic structure. CONCLUSION: Digital technology allows the design and production of guide planes for the preparation of abutment teeth, simplifying the conventionally used technique, with precision and speed.

Tecnologia digital em próteses totais: propriedades dos materiais CAD-CAM e desenvolvimento de uma patente de inovação para simplificação do fluxo de trabalho / Digital technology in complete dentures: properties of CAD-CAM materials and development of an innovation patent to simplify the workflow

Recursos digitais, como a manufatura subtrativa (fresagem CAD-CAM) e a manufatura aditiva (impressão 3D) podem promover significativos avanços, reduzindo o tempo e o custo de produção de próteses totais (PTs). Assim, este estudo objetiva investigar as características superficiais (rugosidade e ângulo de contato), propriedades mecânicas (resistência mini-flexural) e a adesão de biofilme sobre polímeros de PMMA pré-polimerizado para fresagem CAD-CAM e sobre resinas para impressão 3D utilizados na fabricação de bases de PTs, bem como propor um fluxo de trabalho inovador para abreviar e simplificar as etapas de confecção de PTs. Para a análise in vitro, foram fabricados um total de 60 discos e 40 barras distribuídas igualmente em quatro grupos: fresagem CAD-CAM (GF), impressão 3D (GI) e PMMA convencional termopolimerizado por ciclo longo (GCL) ou por energia de micro-ondas (GCM). A rugosidade foi determinada pelo valor de Ra; o ângulo de contato foi medido pelo método da gota séssil; o teste de resistência à mini-flexão foi obtido por teste de flexão de três pontos, enquanto o comportamento frente à formação de biofilme foi analisado através da adesão de biofilme de C. albicans. Os dados foram analisados por meio de estatística descritiva e analítica (α = 0,05). Os resultados mostraram que o GI apresentou a maior rugosidade superficial (Ra: 0,317 ± 0,151µm) e os menores valores de resistência à miniflexão (57,23 ± 9,07MPa) e o GF apresentou a menor adesão de biofilme de C. albicans (log UFC/mL: 3,74 ± 0,57) e maior média de resistência à mini-flexão (114,96 ± 16,23 MPa). Não houve diferença estatística entre o GF e os grupos convencionais para rugosidade, ângulo de contato e resistência à mini-flexão. A patente de inovação desenvolvida estabeleceu um novo fluxo de trabalho para confecção de próteses totais através de um protocolo de três consultas em que foram feitas as moldagens anatômicas na 1ª sessão, juntamente com o registro do suporte labial, plano oclusal e linhas de referência para subsidiar a montagem dos dentes superiores. Uma prótese-teste foi confeccionada por meio de procedimentos convencionais ou CAD-CAM e avaliada na 2ª consulta, permitindo observar o resultado estético, executar a moldagem funcional e realizar o registro da relação maxilo-mandibular, fornecendo referências precisas para a confecção da prótese inferior. Com base nos resultados da fase in vitro deste estudo, os corpos-de-prova obtidos a partir de disco para fresagem CAD-CAM apresentaram resistência flexural e propriedades superficiais semelhantes às resinas convencionais e mostraram um comportamento inibidor da adesão de C. albicans, enquanto os espécimes produzidos por impressão 3D exibiram a menor resistência à flexão e a maior rugosidade da superfície. O dispositivo inovador apresentado para a execução das etapas clínicas relacionadas à fabricação de PTs mostrou-se efetivo para abreviar e simplificar as técnicas disponíveis, apresentando confiabilidade e previsibilidade para produção de PTs em número de sessões reduzido (AU).

Digital features like subtractive and additive manufacturing can promote breakthroughs by reducing the time and cost of making complete dentures (CDs). Thus, this study aims to investigate surface characteristics (roughness and contact angle), mechanical properties (mini-flexural strength), and biofilm adhesion on computer-aided design/computer-aided manufacturing (CAD-CAM) PMMA polymer, and threedimensional (3D) printed resin for denture´s base fabrication as well as to propose an innovative workflow. For in vitro analysis, a total of 60 discs and 40 rectangular specimens were fabricated from one CAD-CAM pre-polymerized PMMA disc (GF), one 3D-printed (GI), and two conventional heat-polymerized (GCL and GCM) materials for denture base fabrication. Roughness was determined by the Ra value; the contact angle was measured by the sessile drop method; the mini-flexural strength test was a three-point bending test while the biofilm formation inhibition behavior was analyzed through C. albicans adhesion. The data were analyzed using descriptive and analytical statistics (α = 0.05). Results showed that GI specimens presented the highest surface roughness (Ra: 0.317 ± 0.151 µm) and lowest mini-flexural strength values (57.23 ± 9.07 MPa) and the GF showed the lowest C. albicans adhesion (log CFU/mL: 3.74 ± 0.57) and highest mini-flexural strength mean (114.96 ± 16.23 MPa). There was no statistical difference between GF and conventional groups for roughness, contact angle, and mini-flexural strength. In turn, the presented novel workflow for complete dentures fabrication reached a three appointments protocol in which preliminary impressions were made in the 1st session, all together to maxillary registration of lip support, occlusal plane, and reference lines for teeth arrangement. A trial denture was manufactured and evaluated by the 2nd appointment through conventional or CAD-CAM procedures, allowing esthetics evaluation, final impression, and maxillomandibular relationship record and providing precise references for final dentures fabrication. Based on the findings of this in vitro study, GF presented surface and mechanical properties similar to conventional resins and show improved behavior preventing C. albicans adhesion, while GI specimens exhibited the lowest flexural strength, and highest surface roughness. The proposed device for CD´s fabrication clinical procedures reached feasibility and by simplifying available techniques, this protocol could achieve reliability and predictability to produce complete dentures with reduced working time (AU).

Violência contra Crianças e Adolescentes em Sofrimento Psíquico: Percepção dos Profissionais de Saúde

Este estudo tem como objetivo identificar a percepção dos profissionais de saúde de um Centro de Atenção Psicossocial Infantojuvenil (CAPSi) sobre a violência sofrida por criança e adolescentes em sofrimento psíquico. Trata-se de um estudo qualitativo, descritivo, desenvolvido no CAPSi numa capital do Nordeste brasileiro. Participou nove profissionais de saúde de nível superior. A coleta de dados se deu através da entrevista semiestruturada, que foram analisadas de acordo com análise de conteúdo de Bardin. Emergiu-se três categorias: Violência como um termo complexo e multifacetado; Violência que traz consequências para a vida da criança e adolescente; e Contexto sociofamiliar desestruturado. A negligência e violência psicológica foram mais apontadas, trazendo consequências negativas para a vida da criança. Aponta-se o contexto sociofamiliar como um agravante das vivências de violência. Portanto, os profissionais de saúde precisam estar atentos à problemática da violência, utilizando estratégias para promoção da saúde entre as crianças, familiares, escola e comunidade em geral.

Chronic Chikungunya arthralgia reduces functionality, quality of life and occupational performance: descriptive cross-sectional study / Artralgia crônica por Chikungunya reduz funcionalidade, qualidade de vida e performance ocupacional: estudo descritivo transversal

ABSTRACT BACKGROUND AND OBJECTIVES: Chikungunya virus (CHIKV) chronic polyarthralgia deteriorates general functionality and work productivity. The objective of this study was to evaluate functionality, pain, quality of life, and sleep quality of individuals with chronic CHIKV arthralgia and correlate them with clinical symptoms, work productivity, and activity impairment. METHODS: This is a descriptive cross-sectional study with 61 chronic CHIKV arthralgia patients. Functionality was assessed using the Health Assessment Questionnaire (HAQ). Pain intensity and interference were measured by using the Visual Analog Scale (VAS) and the Brief Pain Inventory Short Form (BPI), respectively. Quality of life and sleep were evaluated using the Short Form 36 Health Survey (SF-36) and the Pittsburgh Sleep Quality Index (PSQI), respectively. Work Productivity and Activity Impairment (WPAI) questionnaire was used to assess the effects of health in general symptoms on work. RESULTS: Low and moderate level of function was present in 39.4% and 55.7% of the sample, respectively. Moderate pain (5.57 ± 2.25), poor sleep quality (47.54%), and sleep disturbances (42.63%) were also observed. Pearson correlations showed significant correlation between absenteeism and presenteeism with HAQ scores (p = 0.03; r = 0.39 and p = 0.01; r = 0.43, respectively), BPI interference (p = 0.02; r = 0.41 and p = 0.001; r = 0.58, respectively) and SF-36 physical score (p = 0.007; r = -0.49 and p = 0.01; r = 0.58, respectively). Activity impairment showed a significant correlation with HAQ (p = 0.01; r = 0.44), BPI interference (p = 0.006; r = 0.5), SF-36 physical score (p = 0.01; r = -0.6) and SF-36 total score (p = 0.01; r = -0.44). Overall work productivity loss only correlated with BPI interference (p = 0.04; r = 0.37). CONCLUSION: These results suggest that CHIKV chronic arthralgia showed bilateral moderate pain in large joints that impacts activities of daily life, work productivity, and functional activity. HIGHLIGHTS Chronic chikungunya reduces functionality and causes moderate pain and poor sleep quality Clinical symptoms impact daily living activity, work productivity, and activity impairment. Functionality, pain, and sleep correlate with occupational performance.

RESUMO JUSTIFICATIVA E OBJETIVOS: A poliartralgia crônica do vírus Chikungunya (CHIKV) deteriora a funcionalidade e a produtividade do trabalho. O objetivo deste estudo foi avaliar funcionalidade, dor, qualidade de vida e sono de indivíduos com artralgia crônica por CHIKV correlacionada com sintomas clínicos, produtividade do trabalho e comprometimento das atividades. MÉTODOS: Trata-se de um estudo transversal descritivo com 61 pacientes crônicos de artralgia da CHIKV. A intensidade e a interferência da dor foram medidas usando a Escala Analógica Visual (EAV) e o Brief Pain Inventory Short Form (BPI), respectivamente. A qualidade de vida e o sono foram avaliados usando o Short Form 36 Health Survey (SF-36) e o Pittsburgh Sleep Quality Index (PSQI), respectivamente. O questionário Work Productivity and Activity Impairment (WPAI) foi usado para avaliar os efeitos dos sintomas gerais da saúde no trabalho. RESULTADOS: Foi observado um nível de funcionalidade baixo em 39,4% e moderado em 55,7% da amostra. Nível de dor moderada (5,57 ± 2,25), má qualidade do sono (47,54%) e distúrbios do sono (42,63%) também foram observados. O teste de Pearson apresentou correlação significativa entre absenteísmo e presenteísmo com as pontuações de Health Assessment Questionnaire (HAQ) (p = 0,03; r = 0,39 e p = 0,01; r = 0,43 respectivamente), interferência do BPI (p = 0,02; r = 0,41 e p = 0,001; r = 0,58 respectivamente) e score físico do SF-36 (p = 0,007; r = -0,49 e p = 0,01; r = 0,58, respectivamente). O comprometimento da atividade mostrou uma correlação significativa com o HAQ (p = 0,01; r = 0,44), interferência do BPI (p = 0,006; r = 0,5), pontuação física do SF-36 (p = 0,01; r = -0,6) e pontuação total do SF-36 (p = 0,01; r = -0,44). A perda geral de produtividade no trabalho correlacionou-se apenas com a interferência do BPI (p = 0,04; r = 0,37). CONCLUSÃO: Esses resultados sugerem que a artralgia crônica da CHIKV apresenta dor moderada bilateral em grandes articulações com impacto nas atividades de vida diária, produtividade no trabalho e atividade funcional. DESTAQUES A Chikungunya crônica reduz a funcionalidade e causa dor moderada e má qualidade do sono. Os sintomas clínicos afetam atividades de vida diária, a produtividade no trabalho e comprometimento de atividades. Funcionalidade, dor e sono estão correlacionados com o desempenho profissional.