A three-dimensional comparison of intramedullary nail constructs for osteopenic supracondylar femur fractures.

OBJECTIVES: This study developed a new 6 degree-of-freedom, unconstrained biomechanical model that replicated the in vivo loading environment of femoral fractures. The objective of this study was to determine whether various distal fixation strategies alter failure mechanisms and/or offer mechanical advantages when performing retrograde intramedullary nail (IMN) stabilization of supracondylar femur fractures in osteoporotic bone. METHODS: Forty fresh-frozen human femora were allocated into 2 groups of matched pairs: "locked" (fixed angle locking construct with both distal locking screws rigidly attached to the IMN) versus "unlocked" (conventional locking technique with 2 distal locking screws targeted through the distal locking screw holes of the IMN) and "locked" versus "washer" (fixed angle locking with the most distal screw exchanged for a bolt with condyle washers) distal fixation of a retrograde IM nails. A comminuted fracture (OTA 33-A3) was simulated with a wedge osteotomy. Bone density measurements were completed on all specimens before instrumentation. Instrumented femurs were loaded axially to failure, whereas 6 degree-of-freedom translations and angulations were measured using Roentgen stereophotogrammetric analysis. RESULTS: Mean (± SD) load born by "locked" specimens (1609 ± 667 N) at clinical failure was 38.1% greater (P = 0.09) than the corresponding mean load born by "unlocked" specimens (1165 ± 772 N). Clinical failure for the "washer" group (1738 ± 772 N) was 29.9% greater (P = 0.07) than the corresponding mean of the "locked" counterparts (1338 ± 822 N). Failure load was most clearly related to bone density in the "unlocked" fixation group. CONCLUSIONS: Predicting failure load based on bone density using a least squares estimate suggests that the washer construct provides superior fixation to other treatment techniques. The failure mechanism for a comminuted, supracondylar fracture cannot be analyzed accurately with a 1-dimensional measurement. The most common failure mechanism in this model was medial translation and varus angulation.

Digital syndactyly release.

Syndactyly reconstruction is one of the more common congenital malformations treated by hand surgeons. Most techniques require full thickness skin grafts for coverage. Methods of reconstruction without skin grafts have recently been described and outcomes are generally good. Both techniques are detailed here.