Embedded Ultrathin Cluster Electrodes for Long-Term Recordings in Deep Brain Centers.

Neural interfaces which allow long-term recordings in deep brain structures in awake freely moving animals have the potential of becoming highly valuable tools in neuroscience. However, the recording quality usually deteriorates over time, probably at least partly due to tissue reactions caused by injuries during implantation, and subsequently micro-forces due to a lack of mechanical compliance between the tissue and neural interface. To address this challenge, we developed a gelatin embedded neural interface comprising highly flexible electrodes and evaluated its long term recording properties. Bundles of ultrathin parylene C coated platinum electrodes (N = 29) were embedded in a hard gelatin based matrix shaped like a needle, and coated with Kollicoat™ to retard dissolution of gelatin during the implantation. The implantation parameters were established in an in vitro model of the brain (0.5% agarose). Following a craniotomy in the anesthetized rat, the gelatin embedded electrodes were stereotactically inserted to a pre-target position, and after gelatin dissolution the electrodes were further advanced and spread out in the area of the subthalamic nucleus (STN). The performance of the implanted electrodes was evaluated under anesthesia, during 8 weeks. Apart from an increase in the median-noise level during the first 4 weeks, the electrode impedance and signal-to-noise ratio of single-units remained stable throughout the experiment. Histological postmortem analysis confirmed implantation in the area of STN in most animals. In conclusion, by combining novel biocompatible implantation techniques and ultra-flexible electrodes, long-term neuronal recordings from deep brain structures with no significant deterioration of electrode function were achieved.

Chroman-4-one and chromone based somatostatin ß-turn mimetics.

A scaffold approach has been used to develop somatostatin ß-turn mimetics based on chroman-4-one and chromone ring systems. Such derivatives could adopt conformations resembling type II or type II' ß-turns. Side chain equivalents of the crucial Trp8 and Lys9 in somatostatin were introduced in the 2- and 8-positions of the scaffolds using efficient reactions. Interestingly, this proof-of-concept study shows that 4 and 9 have Ki-values in the low µM range when evaluated for their affinity for the sst2 and sst4 receptors.

Hydrophobic ion pairing of a minocycline/Ca(2+)/AOT complex for preparation of drug-loaded PLGA nanoparticles with improved sustained release.

Polymeric nanoparticles is an established and efficient means to achieve controlled release of drugs. Incorporation of minocycline, an antibiotic with anti-inflammatory and neuroprotective properties, into biodegradable nanoparticles may therefore provide an efficient means to combat foreign body reactions to implanted electrodes in the brain. However, minocycline is commonly associated with poor encapsulation efficiencies and/or fast release rates due to its high solubility in water. Moreover, minocycline is unstable under conditions of low and high pH, heat and exposure to light, which exacerbate the challenges of encapsulation. In this work drug loaded PLGA nanoparticles were prepared by a modified emulsification-solvent-diffusion technique and characterized for size, drug encapsulation and in vitro drug release. A novel hydrophobic ion pair complex of minocycline, Ca(2+) ions and the anionic surfactant AOT was developed to protect minocycline from degradation and prolong its release. The optimized formulation resulted in particle sizes around 220 nm with an entrapment efficiency of 43% and showed drug release over 30 days in artificial cerebrospinal fluid. The present results constitute a substantial increase in release time compared to what has hitherto been achieved for minocycline and indicate that such particles might provide useful for sustained drug delivery in the CNS.

An array of highly flexible electrodes with a tailored configuration locked by gelatin during implantation-initial evaluation in cortex cerebri of awake rats.

BACKGROUND: A major challenge in the field of neural interfaces is to overcome the problem of poor stability of neuronal recordings, which impedes long-term studies of individual neurons in the brain. Conceivably, unstable recordings reflect relative movements between electrode and tissue. To address this challenge, we have developed a new ultra-flexible electrode array and evaluated its performance in awake non-restrained animals. METHODS: An array of eight separated gold leads (4 × 10 µm), individually flexible in 3D, were cut from a gold sheet using laser milling and insulated with Parylene C. To provide structural support during implantation into rat cortex, the electrode array was embedded in a hard gelatin based material, which dissolves after implantation. Recordings were made during 3 weeks. At termination, the animals were perfused with fixative and frozen to prevent dislocation of the implanted electrodes. A thick slice of brain tissue, with the electrode array still in situ, was made transparent using methyl salicylate to evaluate the conformation of the implanted electrode array. RESULTS: Median noise levels and signal/noise remained relatively stable during the 3 week observation period; 4.3-5.9 µV and 2.8-4.2, respectively. The spike amplitudes were often quite stable within recording sessions and for 15% of recordings where single-units were identified, the highest-SNR unit had an amplitude higher than 150 µV. In addition, high correlations (>0.96) between unit waveforms recorded at different time points were obtained for 58% of the electrode sites. The structure of the electrode array was well preserved 3 weeks after implantation. CONCLUSIONS: A new implantable multichannel neural interface, comprising electrodes individually flexible in 3D that retain its architecture and functionality after implantation has been developed. Since the new neural interface design is adaptable, it offers a versatile tool to explore the function of various brain structures.

Inhibitors and promoters of tubulin polymerization: synthesis and biological evaluation of chalcones and related dienones as potential anticancer agents.

A series of dihalogenated chalcones and structurally related dienones were synthesized and evaluated for their antiproliferative activity in 10 different cancer cell lines and for their effect on microtubule assembly. All compounds showed cytotoxic activity, with IC(50) values in the 5-280 µM range depending on the chalcone structure and the cell line. Five of the compounds were found to be tubulin polymerization inhibitors. In contrast, one of the compounds was found to stabilize tubulin to the same extent as the anticancer drug docetaxel. Molecular modeling suggested that the tubulin inhibitors bind to the colchicine binding site of ß-tubulin while the novel tubulin stabilization agent seems to interact with the paclitaxel binding site.

2,6,8-Trisubstituted 3-hydroxychromone derivatives as fluorophores for live-cell imaging.

We present the synthesis and photophysical characterisation of a series of structurally diverse, fluorescent 2,6,8-trisubstituted 3-hydroxychromone derivatives with high fluorescence quantum yields and molar extinction coefficients. Two of these derivatives (9 and 10 a) have been studied as fluorophores for cellular imaging in HeLa cells and show excellent permeability and promising fluorescence properties in a cellular environment. In addition, we have demonstrated by photophysical characterisation of 3-isobutyroxychromone derivatives that esterification of the 3-hydroxyl group results in acceptable and useful fluorescence properties.

Synthesis of 2-alkyl-substituted chromone derivatives using microwave irradiation.

A base-promoted condensation between 2-hydroxyacetophenones and aliphatic aldehydes has been studied. The reaction has been optimized to afford 2-alkyl-substituted 4-chromanones in an efficient manner using microwave heating. Performing the reaction using diisopropylamine in EtOH at 170 degrees C for 1 h gave moderate to high yields (43-88%). The 4-chromanones could be further converted into highly functionalized 2,3,6,8-tetrasubstituted chromones in which a 3-substituent (acetate, amine, or bromine) was introduced via straightforward chemical transformations.

Efficient bioreduction of bicyclo[2.2.2]octane-2,5-dione and bicyclo[2.2.2]oct-7-ene-2,5-dione by genetically engineered Saccharomyces cerevisiae.

A screening of non-conventional yeast species and several Saccharomyces cerevisiae (baker's yeast) strains overexpressing known carbonyl reductases revealed the S. cerevisiae reductase encoded by YMR226c as highly efficient for the reduction of the diketones 1 and 2 to their corresponding hydroxyketones 3-6 (Scheme 1) in excellent enantiomeric excesses. Bioreduction of 1 using the genetically engineered yeast TMB4100, overexpressing YMR226c, resulted in >99% ee for hydroxyketone (+)-4 and 84-98% ee for (-)-3, depending on the degree of conversion. Baker's yeast reduction of diketone 2 resulted in >98% ee for the hydroxyketones (+)-5 and (+)-6. However, TMB4100 led to significantly higher conversion rates (over 40 fold faster) and also a minor improvement of the enantiomeric excesses (>99%).

Evaluation of two pairs of chiral stationary phases: effects from the length of the achiral spacers.

Two pairs of chiral stationary phases (CSPs) with different C(2)-symmetric central parts were prepared and evaluated by chromatography of a series of structurally different racemates. Within each pair, the selectors on which the CSPs are based had different lengths of their achiral spacers. The CSPs based on selectors with short spacers showed higher enantioselectivity than the phases incorporating long spacers. On one pair of the phases, a study of the influence from different retention modifiers was performed for a series of benzodiazepinones. This demonstrated the importance of the polymer structure formed from the selectors with different spacer lengths for the enantiodiscriminating ability of the CSPs.