Compositional Optimization of Sputtered WO3/MoO3 Films for High Coloration Efficiency.

Thin films of mixed MoO3 and WO3 were obtained using reactive magnetron sputtering onto ITO-covered glass, and the optimal composition was determined for the best electrochromic (EC) properties. A combinatorial material synthesis approach was applied throughout the deposition experiments, and the samples represented the full composition range of the binary MoO3/WO3 system. The electrochromic characteristics of the mixed oxide films were determined with simultaneous measurement of layer transmittance and applied electric current through the using organic propylene carbonate electrolyte cells in a conventional three-electrode configuration. Coloration efficiency data evaluated from the primary data plotted against the composition displayed a characteristic maximum at around 60% MoO3. Our combinatorial approach allows the localization of the maximum at 5% accuracy.

Investigation of Electrochromic, Combinatorial TiO2-SnO2 Mixed Layers by Spectroscopic Ellipsometry Using Different Optical Models.

We determined the optimal composition of reactive magnetron-sputtered mixed layers of Titanium oxide and Tin oxide (TiO2-SnO2) for electrochromic purposes. We determined and mapped the composition and optical parameters using Spectroscopic Ellipsometry (SE). Ti and Sn targets were put separately from each other, and the Si-wafers on a glass substrate (30 cm × 30 cm) were moved under the two separated targets (Ti and Sn) in a reactive Argon-Oxygen (Ar-O2) gas mixture. Different optical models, such as the Bruggeman Effective Medium Approximation (BEMA) or the 2-Tauc-Lorentz multiple oscillator model (2T-L), were used to obtain the thickness and composition maps of the sample. Scanning Electron Microscopy (SEM) with Energy-Dispersive X-ray Spectroscopy (EDS) has been used to check the SE results. The performance of diverse optical models has been compared. We show that in the case of molecular-level mixed layers, 2T-L is better than EMA. The electrochromic effectiveness (the change of light absorption for the same electric charge) of mixed metal oxides (TiO2-SnO2) that are deposited by reactive sputtering has been mapped too.

Investigation of Combinatorial WO3-MoO3 Mixed Layers by Spectroscopic Ellipsometry Using Different Optical Models.

Reactive (Ar-O2 plasma) magnetron sputtered WO3-MoO3 (nanometer scaled) mixed layers were investigated and mapped by Spectroscopic Ellipsometry (SE). The W- and Mo-targets were placed separately, and 30 × 30 cm glass substrates were slowly moved under the two (W and Mo) separated targets. We used different (oscillator- and Effective Medium Approximation, EMA-based) optical models to obtain the thickness and composition maps of the sample layer relatively quickly and in a cost-effective and contactless way. In addition, we used Rutherford Backscattering Spectrometry to check the SE results. Herein, we compare the "goodness" of different optical models depending upon the sample preparation conditions, for instance, the speed and cycle number of the substrate motion. Finally, we can choose between appropriate optical models (2-Tauc-Lorentz oscillator model vs. the Bruggeman Effective Medium Approximation, BEMA) depending on the process parameters. If one has more than one "molecular layer" in the "sublayers", BEMA can be used. If one has an atomic mixture, the multiple oscillator model is better (more precise) for this type of layer structure.

Flagellin-based electrochemical sensing layer for arsenic detection in water.

Regular monitoring of arsenic concentrations in water sources is essential due to the severe health effects. Our goal was to develop a rapidly responding, sensitive and stable sensing layer for the detection of arsenic. We have designed flagellin-based arsenic binding proteins capable of forming stable filament structures with high surface binding site densities. The D3 domain of Salmonella typhimurium flagellin was replaced with an arsenic-binding peptide motif of different bacterial ArsR transcriptional repressor factors. We have shown that the fusion proteins developed retain their polymerization ability and have thermal stability similar to that of wild-type filament. The strong arsenic binding capacity of the monomeric proteins was confirmed by isothermal titration calorimetry (ITC), and dissociation constants (Kd) of a few hundred nM were obtained for all three variants. As-binding fibers were immobilized on the surface of a gold electrode and used as a working electrode in cyclic voltammetry (CV) experiments to detect inorganic arsenic near the maximum allowable concentration (MAC) level. Based on these results, it can be concluded that the stable arsenic-binding flagellin variant can be used as a rapidly responding, sensitive, but simple sensing layer in a field device for the MAC-level detection of arsenic in natural waters.

Membrane-Based In Situ Mid-Infrared Spectroscopic Ellipsometry: A Study on the Membrane Affinity of Polylactide-co-glycolide Nanoparticulate Systems.

Mid-infrared (IR) ellipsometry of thin films and molecule layers at solid-liquid interfaces has been a challenge because of the absorption of light in water. It has been usually overcome by using configurations utilizing illumination through the solid substrate. However, the access to the solid-liquid interface in a broad spectral range is also challenging due to the limited transparency of most structural materials in the IR wavelength range. In this work, we propose a concept of a microfabricated analysis cell based on an IR-transparent Si membrane with advantages of a robust design, flexible adaptation to existing equipment, small volume, multiple-angle capabilities, broad wavelength range, and opportunities of multilayer applications for adjusted ranges of high sensitivity. The chamber was prepared by 3D micromachining technology utilizing deep reactive ion etching of a silicon-on-insulator wafer and bonded to a polydimethylsiloxane microfluidic injection system resulting in a cell volume of approximately 50 µL. The mechanical stability of the 2 and 5 µm-thick membranes was tested using different "backbone" reinforcement structures. It was proved that the 5 µm-thick membranes are stable at lateral cell sizes of 5 mm by 20 mm. The cell provides good intensity and adjustment capabilities on the stage of a commercial mid-IR ellipsometer. The membrane configuration also provides optical access to the sensing interfaces at a broad range of incident angles, which is a significant advantage in many potential sensing structure configurations, such as plasmonic, multilayer, 2D, or metamaterial applications.

Micro-combinatorial sampling of the optical properties of hydrogenated amorphous [Formula: see text] for the entire range of compositions towards a database for optoelectronics.

The optical parameters of hydrogenated amorphous a-[Formula: see text]:H layers were measured with focused beam mapping ellipsometry for photon energies from 0.7 to 6.5 eV. The applied single-sample micro-combinatorial technique enables the preparation of a-[Formula: see text]:H with full range composition spread. Linearly variable composition profile was revealed along the 20 mm long gradient part of the sample by Rutherford backscattering spectrometry and elastic recoil detection analysis. The Cody-Lorentz approach was identified as the best method to describe the optical dispersion of the alloy. The effect of incorporated H on the optical absorption is explained by the lowering of the density of localized states in the mobility gap. It is shown that in the low-dispersion near infrared range the refractive index of the a-[Formula: see text] alloy can be comprehended as a linear combination of the optical parameters of the components. The micro-combinatorial sample preparation with mapping ellipsometry is not only suitable for the fabrication of samples with controlled lateral distribution of the concentrations, but also opens new prospects in creating databases of compounds for optical and optoelectonic applications.

Sensing Layer for Ni Detection in Water Created by Immobilization of Bioengineered Flagellar Nanotubes on Gold Surfaces.

The environmental monitoring of Ni is targeted at a threshold limit value of 0.34 µM, as set by the World Health Organization. This sensitivity target can usually only be met by time-consuming and expensive laboratory measurements. There is a need for inexpensive, field-applicable methods, even if they are only used for signaling the necessity of a more accurate laboratory investigation. In this work, bioengineered, protein-based sensing layers were developed for Ni detection in water. Two bacterial Ni-binding flagellin variants were fabricated using genetic engineering, and their applicability as Ni-sensitive biochip coatings was tested. Nanotubes of mutant flagellins were built by in vitro polymerization. A large surface density of the nanotubes on the sensor surface was achieved by covalent immobilization chemistry based on a dithiobis(succimidyl propionate) cross-linking method. The formation and density of the sensing layer was monitored and verified by spectroscopic ellipsometry and atomic force microscopy. Cyclic voltammetry (CV) measurements revealed a Ni sensitivity below 1 µM. It was also shown that, even after two months of storage, the used sensors can be regenerated and reused by rinsing in a 10 mM solution of ethylenediaminetetraacetic acid at room temperature.

Plasmon-enhanced two-channel in situ Kretschmann ellipsometry of protein adsorption, cellular adhesion and polyelectrolyte deposition on titania nanostructures.

Plasmon-enhanced in situ spectroscopic ellipsometry was realized using the Kretschmann geometry. A 10-µL flow cell was designed for multi-channel measurements using a semi-cylindrical lens. Dual-channel monitoring of the layer formation of different organic structures has been demonstrated on titania nanoparticle thin films supported by gold. Complex modeling capabilities as well as a sensitivity of ~40 pg/mm2 with a time resolution of 1 s was achieved. The surface adsorption was enhanced by the titania nanoparticles due to the larger specific surface and nanoroughness, which is consistent with our previous results on titanate nanotubes.

Enhanced protein adsorption and cellular adhesion using transparent titanate nanotube thin films made by a simple and inexpensive room temperature process: application to optical biochips.

A new type of titanate nanotube (TNT) coating is investigated for exploitation in biosensor applications. The TNT layers were prepared from stable but additive-free sols without applying any binding compounds. The simple, fast spin-coating process was carried out at room temperature, and resulted in well-formed films around 10nm thick. The films are highly transparent as expected from their nanostructure and may, therefore, be useful as coatings for surface-sensitive optical biosensors to enhance the specific surface area. In addition, these novel coatings could be applied to medical implant surfaces to control cellular adhesion. Their morphology and structure was characterized by spectroscopic ellipsometry (SE) and atomic force microscopy (AFM), and their chemical state by X-ray photoelectron spectroscopy (XPS). For quantitative surface adhesion studies, the films were prepared on optical waveguides. The coated waveguides were shown to still guide light; thus, their sensing capability remains. Protein adsorption and cell adhesion studies on the titanate nanotube films and on smooth control surfaces revealed that the nanostructured titanate enhanced the adsorption of albumin; furthermore, the coatings considerably enhanced the adhesion of living mammalian cells (human embryonic kidney and preosteoblast).

Ellipsometry of silica nanoparticulate Langmuir-Blodgett films for the verification of the validity of effective medium approximations.

The validity of various effective medium approximations (EMAs) (Bruggeman, Maxwell-Garnett) was studied for nanostructured systems, where the scale of inhomogeneities is comparable to the wavelength. Langmuir-Blodgett (LB) layers of Stöber silica nanospheres of diameters between 40 and 129 nm are excellent model structures for the experimental verification of the validity of the EMA methods in spectroscopic ellipsometry (SE) evaluation. Nanostructured mono- and multilayered silica films were investigated by SE and reflectance spectroscopy. The effective refractive index and film thickness were determined from the results of multiparameter fitting of SE spectra in the 300-759 nm wavelength region. The distribution of the effective refractive index in the particulate films was calculated assuming an ideal close-packed arrangement of particles. The average deviation from such a structure was deduced from the corrected model by introducing a "fill factor". In the EMA approximation, the spherical shape of the silica particle determines the optical behavior, rather than the "depth distribution" of silica or porosity. Therefore, the shape of particles has a dominant effect on the optical properties of nanoparticulate LB films.