Using Unentangled Oligomers To Toughen Materials.

Entanglements between polymer chains are responsible for the strength and toughness of polymeric materials. When the chains are too short to form entanglements, the polymer becomes weak and brittle. Here we show that molecular bridging of oligomers in molecular-scale confinement can dramatically toughen materials even when intermolecular entanglements are completely absent. We describe the fabrication of nanocomposite materials that confine oligomer chains to molecular-scale dimensions and demonstrate that partially confined unentangled oligomers can toughen materials far beyond rule-of-mixtures estimates. We also characterize how partially confined oligomers affect the kinetics of nanocomposite cracking in moist environments and show that the presence of a backfilled oligomeric phase within a nanoporous organosilicate matrix leads to atomistic crack path meandering in which the failure path is preferentially located within the matrix phase.

Hyperconnected molecular glass network architectures with exceptional elastic properties.

Hyperconnected network architectures can endow nanomaterials with remarkable mechanical properties that are fundamentally controlled by designing connectivity into the intrinsic molecular structure. For hybrid organic-inorganic nanomaterials, here we show that by using 1,3,5 silyl benzene precursors, the connectivity of a silicon atom within the network extends beyond its chemical coordination number, resulting in a hyperconnected network with exceptional elastic stiffness, higher than that of fully dense silica. The exceptional intrinsic stiffness of these hyperconnected glass networks is demonstrated with molecular dynamics models and these model predictions are calibrated through the synthesis and characterization of an intrinsically porous hybrid glass processed from 1,3,5(triethoxysilyl)benzene. The proposed molecular design strategy applies to any materials system wherein the mechanical properties are controlled by the underlying network connectivity.

Atmospheric plasma deposited dense silica coatings on plastics.

We explore the application of a high-temperature precursor delivery system for depositing high boiling point organosilicate precursors on plastics using atmospheric plasma. Dense silica coatings were deposited on stretched poly(methyl methacrylate), polycarbonate and silicon substrates from the high boiling temperature precursor, 1, 2-bis(triethoxysilyl)ethane, and from two widely used low boiling temperature precursors, tetraethoxysilane and tetramethylcyclotetrasiloxane. The coating deposition rate, molecular network structure, density, Young's modulus and adhesion to plastics exhibited a strong dependence on the precursor delivery temperature and rate, and the functionality and number of silicon atoms in the precursor molecules. The Young's modulus of the coatings ranged from 6 to 34 GPa, depending strongly on the coating density. The adhesion of the coatings to plastics was affected by both the chemical structure of the precursor and the extent of exposure of the plastic substrate to the plasma during the initial stage of deposition. The optimum combinations of Young's modulus and adhesion were achieved with the high boiling point precursor which produced coatings with high Young's modulus and good adhesion compared to commercial polysiloxane hard coatings on plastics.

A new photoactive crystalline highly porous titanium(IV) dicarboxylate.

Titanium is a very attractive candidate for MOFs due to its low toxicity, redox activity, and photocatalytic properties. We present here MIL-125, the first example of a highly porous and crystalline titanium(IV) dicarboxylate (MIL stands for Materials of Institut Lavoisier) with a high thermal stability and photochemical properties. Its structure is built up from a pseudo cubic arrangement of octameric wheels, built up from edge- or corner-sharing titanium octahedra, and terephthalate dianions leading to a three-dimensional periodic array of two types of hybrid cages with accessible pore diameters of 6.13 and 12.55 A. X-ray thermodiffractometry and thermal analysis show that MIL-125 is stable up to 360 degrees C under air atmosphere while nitrogen sorption analysis indicates a surface area (BET) of 1550 m(2) x g(-1). Moreover, under nitrogen and alcohol adsorption, MIL-125 exhibits a photochromic behavior associated with the formation of stable mixed valence titanium-oxo compounds. The titanium oxo cluster are back oxidized in the presence of oxygen. This photochemical phenomenon is analyzed through the combined use of Electron Spin Resonance (ESR) and UV-visible absorption spectroscopies. The photogenerated electrons are trapped as Ti(III) centers, while a concomitant oxidation of the adsorbed alcohol molecules occurs. This new microporous hybrid is a very promising candidate for applications in smart photonic devices, sensors, and catalysis.