State of the art in self-sustaining smoldering for remediation of contaminated soil and disposal of organic waste.

Smoldering combustion applications in energy and environmental fields have attracted increasing research attention in recent years. Smoldering has demonstrated considerable green advantages, such as having a low carbon footprint and being sustainable, for remediation of organic-contaminated soil and disposal of high-moisture, low-calorific value, slurry-type organic waste due to its self-sustaining reaction characteristic. This review aims to analyze and summarize studies on smoldering applications to refine the critical components of applied smoldering systems, key reaction characteristics, and corresponding influencing conditions that affect their effectiveness. Furthermore, the common characteristics and influencing factors of different smoldering application scenarios are compared to provide a comprehensive reference for commercial applications. Thus, this paper specifically includes an overview of the impact of inert porous media, combustible material, and oxidants in applied smoldering systems; a review of the research status of the three key reaction characteristics, including peak temperature, smoldering front propagation velocity, and self-sustainability; a summary of typical influencing factors, disposal material characteristics, and control conditions in the two mainstream application directions, which are remediation of contaminated soil and disposal of organic waste; and a comparative analysis of the common modes of applied smoldering beyond the lab scale. As a technically effective and energy-efficient emerging technology, the prospects of smoldering as a robust treatment process in environmental pollution cleanup are presented.

Characteristics of the pyrolytic products and the pollutant emissions at different operating stages from a pilot waste tire pyrolysis furnace.

Pyrolysis is considered a highly practical, cost-effective, and environment-friendly technology for waste tires disposal. In this study, pyrolysis processes of waste tires were conducted in a pilot scale furnace feeding at 30 kg/h. The properties of pyrolytic products and the distribution patterns of pollutants generated in different operating stages (start-up, steady, and shut-down) were investigated. The pyrolytic gas in the steady state had a high caloric value of 10799 kJ/Nm3, valuable as heating source for pyrolysis. The elements of sulfur and zinc were effectively fixed as ZnS in the pyrolytic carbon. The basic properties of pyrolytic oil were in line with commercial diesel oil except for the lower flash point. Heavy metals were mainly concentrated in the pyrolytic carbon, with slightly higher concentrations in the steady state. Moreover, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were mainly concentrated in the pyrolytic oil, with predominated low-ring PAHs and high chlorinated PCDD/Fs. The concentrations of PAHs and PCDD/Fs in the gas phase were higher during the start-up stage due to the memory effect, whereas were effectively reduced during the steady stage. The concentration of PAHs in the solid phase was highest during the furnace start-up and lowest in the shut-down stage. In contrast to PAHs, the PCDD/Fs in the solid phase reached their highest concentration during the shut-down stage, which was mainly affected by temperature. The results provide guidance for the reducing of pollutant emissions and the recycling of pyrolytic products.

Comparison of GLIM, SGA, PG-SGA, and PNI in diagnosing malnutrition among hepatobiliary-pancreatic surgery patients.

Objective: To compare the diagnostic value of four tools-the Global Leadership Initiative on Malnutrition (GLIM) criteria, the subjective global assessment (SGA), patient-generated subjective global assessment (PG-SGA), and prognostic nutritional index (PNI) in malnutrition among hospitalized patients undergoing hepatobiliary-pancreatic surgery. Meanwhile, to observe the nutritional intervention of these patients. Methods: Present study was a cross-sectional study, including 506 hospitalized patients who underwent hepatobiliary-pancreatic surgery between December 2020 and February 2022 at Ningbo Medical Center Lihuili Hospital, China. The incidence rate of malnutrition was diagnosed using the four tools. The consistency of the four tools was analyzed by Cohen's kappa statistic. Data, including nutritional characteristics and nutritional interventions, were collected. The nutritional intervention was observed according to the principles of Five Steps Nutritional Treatment. Results: The prevalence was 36.75, 44.58, and 60.24%, as diagnosed by the GLIM, PG-SGA, and PNI, respectively, among 332 tumor patients. Among the 174 non-tumor patients, the prevalence was 9.77, 10.92, and 32.18% as diagnosed by the GLIM, SGA, and PNI. The diagnostic concordance of PG-SGA and GLIM was higher (Kappa = 0.814, <0.001) than SGA vs. GLIM (Kappa = 0.752, P < 0.001) and PNI vs. GLIM (Kappa = 0.265, P < 0.001). The univariate analysis revealed that older age, lower BMI and tumorous were significantly associated with nutritional risks and malnutrition. Among 170 patients with nutritional risk, most of patients (118/170, 69.41%) did not meet the nutritional support standard. Conclusion: The incidence of nutritional risk and malnutrition is high among patients with hepatobiliary and pancreatic diseases, specifically those with tumors. The GLIM showed the lowest prevalence of malnutrition among the four tools. The PG-SGA and GLIM had a relative high level of agreement. There was a low proportion of nutritional support in patients. More prospective and well-designed cohort studies are needed to confirm the relevance of these criteria in clinical practice in the future.

An investigation into the reproductive concerns of young women with breast cancer.

Objective: Breast cancer has the highest incidence rate among malignant tumors in China, with a trend of affecting younger women. The survival rate of young patients with breast cancer has improved significantly, but the treatment to which they are subjected has short- and long-term adverse effects such as damage to the ovaries, which may result in infertility. Such consequences, in turn, increase patients' concerns over future reproduction and childrearing. At present, patients lack easy access to the informative consultations and accurate patient education. Nor do medical staff continuously assess their overall wellbeing, engage in mental health interventions, or ensure that they have the knowledge necessary to manage their reproductive concerns. This study sought to investigate the reproductive concerns of young female patients with breast cancer, identify the factors that influence those concerns, and provide a theoretical and practical scientific basis for the future fertility management of this specific population. Methods: Our study is based on a cross-sectional survey of 112 young patients with breast cancer recruited by a convenience sampling method in the Shanghai Cancer Center, Fudan University, from October 2020 to January 2021. A self-designed questionnaire and the Chinese version of the Reproductive Concerns After Cancer were used for data collection. Multivariable linear regression was performed to analyze the data. Results: The total score for reproductive concerns was 59.96 â€‹± â€‹9.91, indicating that young women with breast cancer have relatively high levels of concern about reproduction. Multivariable linear regression analyses suggested that age, education level, and the desire for parenthood were the factors that influenced these concerns. The younger the patient, the higher the level of concern. Patients with a higher level of education and a greater desire for parenthood indicated greater levels of concern about reproductive issues. Conclusions: The levels of concern about reproduction expressed by these young patients with breast cancer were high. The factors that influenced their concern were their age, education level, and desire to have children. We suggest that medical staff focus on young patients during treatment and develop effective intervention measures based on their desire for parenthood, disease condition, and psychological status to promote the patients' physical and mental health.

Formation and control of dioxins during thermal desorption remediation of chlorine and non-chlorine organic contaminated soil.

Formation and emission of dioxins is a great concern during thermal desorption remediation of organic contaminated soil. The differential formation of dioxins from chlorine organic contaminated soil (COCS) and non-chlorine organic contaminated soil (NCOCS) is still unclear and the control technique for the dioxins generated is an urgent need. In this study, the formation and distribution characteristics of dioxins were investigated in the thermal desorption unit combined with flue gas purification system during COCS and NCOCS treatments. Although organic contaminates were well desorbed, de-novo formation of dioxins was observed for both COCS and NCOCS, as well as synthesis from precursors for NCOCS. The gas-phase dioxin in the flue gas purification system continuously decreased during NCOCS thermal desorption, while the dioxin concentration in the quench tower sharply increased from 0.46 to 2.13 ng/Nm3 through de-novo synthesis during COCS treatment. Furthermore, the emission of dioxins only slightly reduced (for COCS) or even increased (for NCOCS) at 70% operating load. The catalytic adsorption tower within modified activated carbon and V5-Mo5-Ti catalyst after bag filter can reduce the emission of dioxins up to 91.4% at the condition of secondary combustion chamber closure, demonstrating that the catalytic adsorption tower can replace the secondary combustion chamber for controlling dioxin emission. More importantly, the highly toxic low-chlorinated polychlorinated dibenzodioxins and polychlorinated dibenzofurans (PCDD/PCDFs) were selectively removed from flue gas by the catalytic adsorption tower. These results reveal the differential formation characteristics of dioxins during COCS and NCOCS thermal treatments and highlight V5-Mo5-Ti/ modified activated carbon as a promising catalytic adsorption material to control the emission of dioxins from the thermal desorption of organic contaminated soil.

Dioxin emission and distribution from cement kiln co-processing of hazardous solid waste.

Cement kiln collaborative disposal technology can not only dispose of hazardous waste but also provide energy for the cement industry. However, the addition of hazardous waste may promote the formation of dioxins in cement kilns. In this study, typical hazardous solid wastes, such as solidified fly ash, electroplating sludge, and industrial residue, were co-processed in a cement kiln with different feeding positions and different feeding amounts. The concentrations of dioxins in the flue gas, clinker, and precalciner furnace slag were investigated. The effect of adding mixed hazardous solid waste on the formation of dioxin was also studied. The results showed that the concentration of dioxin in the flue gas without added hazardous waste was 1.57 ng/m3, and the concentration varied from 1.03 to 6.49 ng/m3 after the addition of hazardous waste. In addition, the concentration of dioxin in the flue gas and solid samples increased substantially when the co-processing ratio doubled. The large amount of Cu in solidified fly ash promoted the formation of dioxins, while the higher S content in the electroplating sludge suppressed the formation of dioxins. Compared with the addition of single hazardous waste, the concentration of dioxin in precalciner furnace slag increases by about 300%. Furthermore, the distributions of isomers in the clinker and precalciner furnace slag were similar. 1,2,3,4,6,7,8-HpCDD and OCDD accounted for a large proportion of the mass concentration, and the contribution rate ranged from 48.7 to 82.0%. Most importantly, correlation analysis showed that the concentration of dioxin was closely related to the copper content, hazardous waste types and additive proportion, with correlation coefficients of 0.79, 0.83, and 0.89, respectively. This study provides a basis for exploring the high environmental benefits of disposing of hazardous solid waste by co-processing in cement kilns.

Long non­coding RNA SNHG20 promotes colorectal cancer cell proliferation, migration and invasion via miR­495/STAT3 axis.

Colorectal cancer (CRC) is one of the primary causes of cancer­associated mortality worldwide. However, the potential molecular mechanism of CRC progression remains unknown. Long non­coding RNA small nucleolar RNA host gene 20 (SNHG20) has been demonstrated to be involved in the development and progression of a variety of tumors, including CRC. However, the involvement of SNHG20 in CRC progression remains unclear. The aim of the present study was to investigate the functional role and molecular mechanism of SNHG20 in CRC progression. In the present study, SNHG20 expression was found to be significantly upregulated in CRC tissues and cell lines. Association analysis indicated that high SNHG20 expression was significantly association with greater tumor size (P=0.014), tumor invasion depth (P=0.019), positive lymph node status (P=0.022), distant metastasis (P=0.017) and advanced tumor node metastasis stage (P=0.038). Loss­of­function experiments indicated that SNHG20 knockdown could significantly suppress proliferation, migration and invasion in vitro. Notably, SNHG20 knockdown significantly inhibited tumor growth and lung metastasis in vivo. Bioinformatics analysis and luciferase reporter assays confirmed that microRNA (miR)­495 was a direct target of SNHG20. Rescue assays indicated that miR­495 inhibitor reversed the suppressive effects of SNHG20 knockdown on CRC progression. Moreover, STAT3 was identified as a downstream target of miR­495 in CRC. STAT3 overexpression partially rescued the inhibitory effects of SNHG20 knockdown on CRC progression. Taken together, the results revealed that SNHG20 facilitated CRC progression by regulating STAT3 expression and by sponging miR­495.

Comparisons of three different doses of alirocumab application in patients with hypercholesterolemia: a meta-analysis.

INTRODUCTION: Low high-density lipoprotein cholesterol (HDL-C) and high low-density lipoprotein cholesterol (LDL-C) levels are associated with incidence of cardiovascular disease (CVD). Alirocumab has been considered as an efficacious, safe and promising therapeutic modality for hypercholesterolemia. The purpose of this study is to compare the differences of the three different doses of alirocumab in patients with hypercholesterolemia. EVIDENCE ACQUISITION: Randomized controlled trials were identified from PubMed, EMBASE, PMC and Cochrane-library databases. The inter-comparison of different doses were performed by subgroups analysis. Meta-analyses were performed by the Review Manager 5.3 and STATA 13.0 software. EVIDENCE SYNTHESIS: A total of nine studies involving 3870 patients were included in this meta-analysis. Alirocumab administered at 75-150 mg every 2 weeks (Q2W) resulted in a greater percent change from baseline in LDL-C concentrations (MD, -55.17; 95% CI: -64.35 to -45.99; P<0.05), and HDL-C levels (MD, 7.70; 95% CI 5.94 to 9.46; P<0.05) than other two doses (300 mg every 4 weeks [Q4W], 150 mg every 2 weeks [Q2W]). There was no difference in achieving the treatment goal of LDL-C (≤1.8 mmol/L), in other serum lipid parameters (total cholesterol [TC], triglyceride [TG]), and in the incidence of adverse events. CONCLUSIONS: The results demonstrate that alirocumab at a dose of 75-150 mg Q2W should be preferred in patients with hypercholesterolemia.

Comparative analyses of catalytic degradation of PCDD/Fs in the laboratory vs. industrial conditions.

This study investigates the efficiencies and mechanisms of the catalytic degradation of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) first, in simulated laboratory conditions and then, in a commercial municipal solid waste incineration (MSWI) plant. Five commercially available V2O5-WO3/TiO2 (VWTi) catalysts were tested. The degradation efficiency of PCDD/Fs in the simulated flue gas ranged 22.8-91.7% and was generally higher than that in the MSWI flue gas of 8.0-85.4%. The degradation efficiency of PCDD/Fs in the real flue gas of the MSWI plant was largely hindered by the complex composition of the flue gas, which could not be completely reproduced in the simulated laboratory conditions. Furthermore, the degradation of the higher chlorinated PCDD/Fs was easier compared to the lower chlorinated ones in the presence of the VWTi catalysts, which was primarily driven by the tendency of the higher chlorinated PCDD/Fs to be adsorbed on the surface of the catalyst and further destructed due to their lower vapor pressure. In addition, powdered catalysts should be preferred over the honeycomb shaped ones as they exposed higher PCDD/Fs degradation efficiencies under equal reaction conditions. The chemical composition and a range of the relevant to the study properties of the catalysts, such as surface area, crystallinity, oxidation ability, and surface acidity, were analyzed. The study ultimately supports the identification of the preferred characteristics of the VWTi catalysts for the most efficient degradation of toxic PCDD/Fs and elucidates the corresponding deactivation reasons of the catalysts.

Effects of bypass system on PCDD/F emission and chlorine circulation in cement kilns.

A bypass at the kiln inlet allows the effective reduction of alkali chloride cycles and thus perhaps affects the emission of PCDD/Fs. Effects of bypass system on PCDD/F emission and chlorine circulation were studied in two typical dry cement kilns with 5000 ton/day clinker capacity in China and named CK1 and CK2, respectively. Firstly, the emission level of PCDD/Fs with the operation of bypass system was estimated in CK1, to certify that bypass system has a perfect adaption to the cement kiln regarding the PCDD/F emission even with the refuse derived fuel (RDF) as the replacement of fuel. On the other hand, the operating conditions in the CK2 were scrutinised by monitoring the concentrations of SO2, NH3 and HCl. In addition, the characteristics of raw meal, clinker, bag filter ash and bypass ash were also investigated by Energy Dispersive Spectrometer (EDS), metal and chlorine analysis. The balance of chlorine showed that 18 % of the possible accumulated chlorine could be ejected from the cement kiln system when 2 % of kiln exhaust gas was extracted. Furthermore, the emission level of PCDD/Fs in the main flue gas also decreased from 0.037 ± 0.035 ng I-TEQ/Nm(3) to 0.019 ± 0.007 ng I-TEQ/Nm(3) with a reduction efficiency of 48.2 %. Most importantly, PCDD/F emission from the bypass system was proven to have rather minor effect on the total emission factor. The congener distributions of PCDD/Fs were also analysed in the flue gas and fly ash, before and after application of bypass system, to find cues to the formation mechanism.

Recycling ash into the first stage of cyclone pre-heater of cement kiln.

Fly ash collected from the bag filter could be recycled into the first stage of the cyclone pre-heater of the cement kiln, resulting in the possible enrichment of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). In this study, soxhlet fly ash (SFA) and raw meal (RM) were selected as the basis for the PCDD/F formation experiments. The levels of 2,3,7,8-PCDD/Fs formed on the SFA and RM were observed to be 2550pg/g (157pg I-TEQ/g) and 1142pg/g (55pg I-TEQ/g), respectively. While less 2,3,7,8-PCDD/Fs was detected when SFA was mixed with RM, suggesting that recycling cement kiln ash would not largely increase the concentration of PCDD/Fs in flue gas. Furthermore, the possible influencing factors on the PCDD/F formation were also investigated. The formation of 2,3,7,8-PCDD/Fs was up to 10,871pg/g (380pg I-TEQ/g) with the adding of CuCl2, which was much higher than the results of CuO and activated carbon. Most importantly, the homologue, congener and gas/particle distribution of PCDD/Fs indicated that de novo synthesis was the dominant PCDD/F formation pathway for SFA. Lastly, principal component analysis (PCA) was also conducted to identify the relationship between the compositions of reactant and the properties of PCDD/Fs produced.

Dipeptidyl peptidase-4 inhibitors and fracture risk: an updated meta-analysis of randomized clinical trials.

Data on the effects of dipeptidyl peptidase-4 (DPP-4) inhibitors on fracture risk are conflicting. Here, we performed a systematic review and meta-analysis of randomized controlled trials (RCTs) assessing the effects of DPP-4 inhibitors. Electronic databases were searched for relevant published articles, and unpublished studies presented at ClinicalTrials.gov were searched for relevant clinical data. Eligible studies included prospective randomized trials evaluating DPP-4 inhibitors versus placebo or other anti-diabetic medications in patients with type 2 diabetes. Study quality was determined using Jadad scores. Statistical analyses were performed to calculate the risk ratios (RRs) and 95% confidence intervals (CIs) using fixed-effects models. There were 62 eligible RCTs with 62,206 participants, including 33,452 patients treated with DPP-4 inhibitors. The number of fractures was 364 in the exposed group and 358 in the control group. The overall risk of fracture did not differ between patients exposed to DPP-4 inhibitors and controls (RR, 0.95; 95% CI, 0.83-1.10; P = 0.50). The results were consistent across subgroups defined by type of DPP-4 inhibitor, type of control, and length of follow-up. The study showed that DPP-4 inhibitor use does not modify the risk of bone fracture compared with placebo or other anti-diabetic medications in patients with type 2 diabetes.

Suppression of dioxins by S-N inhibitors in pilot-scale experiments.

S-N inhibitors like thiourea and sewage sludge decomposition gases (SDG) are relatively novel dioxins suppressants and their efficiencies are proven in numerous lab-scale experiments. In this study, the suppression effects of both thiourea and SDG on the formation of dioxins are systematically tested in a pilot-scale system, situated at the bypass of a hazardous waste incinerator (HWI). Moreover, a flue gas recirculation system is used to get high dioxin suppression efficiencies. Operating experience shows that this system is capable of stable operation and to keep gaseous suppressant compounds at a high and desirable molar ratio (S + N)/Cl level in the flue gas. The suppression efficiencies of dioxins are investigated in flue gas both without and with addition of S-N inhibitors. A dioxin reduction of more than 80 % is already achieved when the (S + N)/Cl molar ratio is increased to ca. 2.20. When this (S + N)/Cl molar ratio has augmented to 4.18 by applying suppressant recirculation, the residual PCDD/Fs concentration in the flue gas shrank from 1.22 to 0.08 ng I-TEQ/Nm(3). Furthermore, the congener distribution of dioxins is analysed to find some possible explanation or suppression mechanism. In addition, a correlation analysis between (S + N)/Cl molar ratios and PCDD/Fs is also conducted to investigate the chief functional compounds for dioxin suppression.

Suppression of dioxins after the post-combustion zone of MSWIs.

Thiourea was selected as representative of combined S- and N-inhibitors and injected after the post-combustion zone of two full-scale municipal solid waste incinerators (MSWIs) using a dedicated feeder. Firstly, the operating conditions were scrutinised by monitoring the concentrations of SO2, NH3 and HCl in the clean flue gas. The suppression experiment showed that in MSWI A thiourea could reduce the total I-TEQ value in flue gas by 73.4% from 1.41ng I-TEQ/Nm(3) to 0.37I-TEQ/Nm(3), those in fly ash by 87.1% from 14.3ng I-TEQ/g to 1.84I-TEQ/g and the total dioxins emission factor by 87.0wt.%, with a (S+N)/Cl molar ratio of 9.4. The suppression efficiencies of PCDD/Fs in flue gas and fly ash in MSWI B could be up to 69.2% and 83.0% when the (S+N)/Cl molar ratio attained 7.51. Furthermore, the congener distributions of dioxins were also analysed in the flue gas and fly ash, before and after addition of thiourea, to find cues to some suppression mechanism. In addition, the filtered fly ash was explored by the Scanning Electron Microscope (SEM) and Energy Dispersive Spectrometer (EDS) analysis of fly ash. These results suggest that poisoning the metal catalyst and blocking the chlorination are most probably responsible for suppression.

High temperature suppression of dioxins.

Combined Sulphur-Nitrogen inhibitors, such as sewage sludge decomposition gases (SDG), thiourea and amidosulphonic acid have been observed to suppress the de novo synthesis of dioxins effectively. In this study, the inhibition of PCDD/Fs formation from model fly ash was investigated at unusually high temperatures (650 °C and 850 °C), well above the usual range of de novo tests (250-400 °C). At 650 °C it was found that SDG evolving from dried sewage sludge could suppress the formation of 2,3,7,8-substituted PCDD/Fs with high efficiency (90%), both in weight units and in I-TEQ units. Additionally, at 850 °C, three kinds of sulphur-amine or sulphur-ammonium compounds were tested to inhibit dioxins formation during laboratory-scale tests, simulating municipal solid waste incineration. The suppression efficiencies of PCDD/Fs formed through homogeneous gas phase reactions were all above 85% when 3 wt. % of thiourea (98.7%), aminosulphonic acid (96.0%) or ammonium thiosulphate (87.3%) was added. Differences in the ratio of PCDFs/PCDDs, in weight average chlorination level and in the congener distribution of the 17 toxic PCDD/Fs indicated that the three inhibitors tested followed distinct suppression pathways, possibly in relation to their different functional groups of nitrogen. Furthermore, thiourea reduced the (weight) average chlorinated level. In addition, the thermal decomposition of TUA was studied by means of thermogravimetry-fourier transform infrared spectroscopy (TG-FTIR) and the presence of SO2, SO3, NH3 and nitriles (N≡C bonds) was shown in the decomposition gases; these gaseous inhibitors might be the primary dioxins suppressants.

A review of the genus Abdosetae (Araneae: Phrurolithidae) from China.

Four species of the genus Abdosetae Fu, Zhang & MacDermott, 2010 from China are reviewed, and three of them are new to science: A. digitata sp. nov., A. falcata sp. nov. and A. hamata sp. nov. We re-examined the type material of A. hainan Fu, Zhang & MacDermott, 2010, re-delimited the generic characteristics and re-described the type species. A key to all Abdosetae species and a distribution map of the Chinese species are provided.

Antiosteoporotic Effects of Huangqi Sanxian Decoction in Cultured Rat Osteoblasts by Proteomic Characterization of the Target and Mechanism.

Huangqi Sanxian decoction (HQSXD) is routinely used for the treatment of osteoporosis in the Chinese traditional healthcare system. However, the targets and mechanism underlying the effect of HQSXD on osteoporosis have not been documented. In the present study, seropharmacology and proteomic approaches (two-dimensional gel electrophoresis combined with mass spectrometry) were used to investigate the effects and possible target proteins of HQSXD on osteoblast. We found that HQSXD-treated rat serum significantly enhanced osteoblast proliferation, differentiation, and mineralization. In HQSXD-S-treated osteoblasts, there were increases in the expression of N-formyl peptide receptor 2 and heparan sulfate (glucosamine) 3-O-sulfotransferase 3A1 and reduction in the expression of alpha-spectrin, prohibitin, and transcription elongation factor B (SIII), polypeptide 1. The identified proteins are associated with cell proliferation, differentiation, signal transcription, and cell growth. These findings might provide valuable insights into the mechanism of antiosteoporotic effect affected by HQSXD treatment in osteoblasts.

Dioxins from medical waste incineration: Normal operation and transient conditions.

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are key pollutants in waste incineration. At present, incinerator managers and official supervisors focus only on emissions evolving during steady-state operation. Yet, these emissions may considerably be raised during periods of poor combustion, plant shutdown, and especially when starting-up from cold. Until now there were no data on transient emissions from medical (or hospital) waste incineration (MWI). However, MWI is reputed to engender higher emissions than those from municipal solid waste incineration (MSWI). The emission levels in this study recorded for shutdown and start-up, however, were significantly higher: 483 ± 184 ng Nm(-3) (1.47 ± 0.17 ng I-TEQ Nm(-3)) for shutdown and 735 ng Nm(-3) (7.73 ng I-TEQ Nm(-3)) for start-up conditions, respectively. Thus, the average (I-TEQ) concentration during shutdown is 2.6 (3.8) times higher than the average concentration during normal operation, and the average (I-TEQ) concentration during start-up is 4.0 (almost 20) times higher. So monitoring should cover the entire incineration cycle, including start-up, operation and shutdown, rather than optimised operation only. This suggestion is important for medical waste incinerators, as these facilities frequently start up and shut down, because of their small size, or of lacking waste supply. Forthcoming operation should shift towards much longer operating cycles, i.e., a single weekly start-up and shutdown.

Simultaneous suppression of PCDD/F and NO(x) during municipal solid waste incineration.

Thiourea was tested as a dioxins inhibitor in a full-scale municipal solid waste incinerator with high capacity (34 t h(-1)). The suppressant, featuring a high S- and N-content, was converted into liquor and then injected (35 kg h(-1)) into the furnace (850 °C) through the inlets already used for Selective Non-Catalytic Reduction (SNCR) of flue gas NOx. The first results show that thiourea reduces the dioxins in flue gas by 55.8 wt.%, those in fly ash by 90.3 wt.% and the total dioxins emission factor by 91.0 wt.%. The concentration of PCDD/Fs was 0.08 ng TEQ Nm(-3), below the national standard of 0.1 ng TEQ Nm(-3). The weight average chlorination degree of dioxins decreases slightly after adding the inhibitor, indicating that it suppresses both the formation and the chlorination of dioxins. Analysis of fly ash by scanning electron microscope (SEM) suggests that the particle size becomes larger after adding the inhibitor. Further analysis using an energy dispersive spectrometer (EDS) reveals that the sulphur content in fly ash rises, but the chlorine content declines when adding thiourea. These results suggest that poisoning the metal catalyst and blocking the chlorination are probably responsible for suppression. NOx reduction attains 42.6 wt.%. These tests are paving the way for further industrial application and assist in controlling the future emissions of dioxins and NOx from MSWI.