A 3D Cross-Linked Metal-Organic Framework (MOF)-Derived Polymer Electrolyte for Dendrite-Free Solid-State Lithium-Ion Batteries.

Lithium metal batteries (LMBs) with high energy density have received widespread attention; however, there are usually issues with lithium dendrite growth and safety. Therefore, there is a demand for solid electrolytes with high mechanical strength, room-temperature ionic conductivity, and good interface performance. Herein, a 3D cross-linked metal-organic framework (MOF)-derived polymer solid electrolyte exhibits good mechanical and ionic conductive properties simultaneously, in which the MOF with optimized pore size and strong imidazole cation sites can restrict the migration of anions, resulting in a uniform Li+ flux and a high lithium-ion transference number (0.54). Moreover, the MOF-derived polymer solid electrolytes with the 3D cross-linked network can promote the rapid movement of Li+ and inhibit the growth of lithium dendrites. Lithium symmetric batteries assembled with the 3D MOF-derived polymer solid electrolytes are subjected to lithium plating/stripping and cycled over 2000 h at a current density of 0.1 mA cm-2 and over 800 h at a current density of 0.2 mA cm-2 . The Li/P-PETEA-MOF/LiFePO4 batteries exhibit excellent long-cycle stability and cycle reversibility.

An Asymmetric Cross-Linked Ionic Copolymer Hybrid Solid Electrolyte with Super Stretchability for Lithium-Ion Batteries.

Composite solid electrolytes are recommended to be the most promissing strategy for solid-state batteries because they combine the advantages of inorganic ceramics and polymers. However, the huge interfacial resistance between the inorganic ceramic and polymer results in low ionic conductivity, which is still the major impediment that limits their applications. Herein, a novel highly elastic and weakly coordinated ionic copolymer hybrid electrolyte with asymmetric structure based on surface-modified Li1.5 Al0.5 Ge1.5 (PO4 )3 by "in situ" polymerization is proposed to improve ionic conductivity and mechanical properties simultaneously. The all-solid hybrids electrolytes exhibit room-temperature ionic conductivity up to 2.61 × 10-4 S cm-1 and lithium-ion transference number of 0.41. The hybrids electrolytes can be repeatedly stretching-releasing-stretching, showing a super stretchability with the elongation at break up to 496%. The Li symmetrical cells assembled with the hybrid electrolytes can continuously operate for 800 h at 0.1 mA cm-2 without discernable dendrites, indicating good interfacial compatibility between the hybrid electrolytes and lithium electrodes. The Li|LiFePO4 batteries assembled with the hybrid electrolytes deliver an initial discharge specific capacity of 165.5 mAh g-1 with an initial coulombic efficiency of 94.8% and 154 mAh g-1 after 100 cycles at 0.1 C, and maintain 95.4% capacity retention after 100 cycles at 0.5 C.

Highly populated and nearly monodispersed nanosilica particles in an organic medium and their epoxy nanocomposites.

An organic aminopropyl-functionalized nanosilica sol was synthesized in the presence of ethyl silicate, γ-(aminopropyl)triethoxysilane (KH550), and N,N-dimethylformamide (DMF) via a sol-gel technique and then used to prepare epoxy nanocomposites. Structure and morphology analyses of the obtained aminopropyl-functionalized nanosilicas were observed by dynamic light scattering (DLS), transmission electron microscopy (TEM), and high-resolution TEM (HRTEM). TEM and DLS showed that modified nanosilicas with an average diameter of 30 nm dispersed homogeneously in DMF. The effects of the aminopropyl-functionalized nanosilica particles on the flexural modulus, impact strength, glass transition temperature (Tg), and bulk resistivity (ρv) of the epoxy nanocomposites were investigated. The toughening mechanisms and microstructures were determined in terms of the impact fracture surface morphology using scanning electron microscopy.