Influence of climate change and pesticide use practices on the ecological risks of pesticides in a protected Mediterranean wetland: A Bayesian network approach.

Pollution by agricultural pesticides is one of the most important pressures affecting Mediterranean coastal wetlands. Pesticide risks are expected to be influenced by climate change, which will result in an increase of temperatures and a decrease in annual precipitation. On the other hand, pesticide dosages are expected to change given the increase in pest resistance and the implementation of environmental policies like the European ´Farm-to-Fork` strategy, which aims for a 50 % reduction in pesticide usage by 2030. The influence of climate change and pesticide use practices on the ecological risks of pesticides needs to be evaluated making use of realistic environmental scenarios. This study investigates how different climate change and pesticide use practices affect the ecological risks of pesticides in the Albufera Natural Park (Valencia, Spain), a protected Mediterranean coastal wetland. We performed a probabilistic risk assessment for nine pesticides applied in rice production using three climatic scenarios (for the years 2008, 2050 and 2100), three pesticide dosage regimes (the recommended dose, and 50 % increase and 50 % decrease), and their combinations. The scenarios were used to simulate pesticide exposure concentrations in the water column of the rice paddies using the RICEWQ model. Pesticide effects were characterized using acute and chronic Species Sensitivity Distributions built with toxicity data for aquatic organisms. Risk quotients were calculated as probability distributions making use of Bayesian networks. Our results show that future climate projections will influence exposure concentrations for some of the studied pesticides, yielding higher dissipation and lower exposure in scenarios dominated by an increase of temperatures, and higher exposure peaks in scenarios where heavy precipitation events occur right after pesticide application. Our case study shows that pesticides such as azoxystrobin, difenoconazole and MCPA are posing unacceptable ecological risks for aquatic organisms, and that the implementation of the ´Farm-to-Fork` strategy is crucial to reduce them.

Influence of Heat Accumulation on Morphology Debris Deposition and Wetting of LIPSS on Steel upon High Repetition Rate Femtosecond Pulses Irradiation.

The fabrication of laser-induced periodic surface structures (LIPSS) over extended areas at high processing speeds requires the use of high repetition rate femtosecond lasers. It is known that industrially relevant materials such as steel experience heat accumulation when irradiated at repetition rates above some hundreds of kHz, and significant debris redeposition can take place. However, there are few studies on how the laser repetition rate influences both the debris deposition and the final LIPSS morphology. In this work, we present a study of fs laser-induced fabrication of low spatial frequency LIPSS (LSFL), with pulse repetition rates ranging from 10 kHz to 2 MHz on commercially available steel. The morphology of the laser-structured areas as well as the redeposited debris was characterized by scanning electron microscopy (SEM) and µ-Raman spectroscopy. To identify repetition rate ranges where heat accumulation is present during the irradiations, we developed a simple heat accumulation model that solves the heat equation in 1 dimension implementing a Forward differencing in Time and Central differencing in Space (FTCS) scheme. Contact angle measurements with water demonstrated the influence of heat accumulation and debris on the functional wetting behavior. The findings are directly relevant for the processing of metals using high repetition rate femtosecond lasers, enabling the identification of optimum conditions in terms of desired morphology, functionality, and throughput.

Author Correction: Coherent scatter-controlled phase-change grating structures in silicon using femtosecond laser pulses.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

Coherent scatter-controlled phase-change grating structures in silicon using femtosecond laser pulses.

Periodic structures of alternating amorphous-crystalline fringes have been fabricated in silicon using repetitive femtosecond laser exposure (800 nm wavelength and 120 fs duration). The method is based on the interference of the incident laser light with far- and near-field scattered light, leading to local melting at the interference maxima, as demonstrated by femtosecond microscopy. Exploiting this strategy, lines of highly regular amorphous fringes can be written. The fringes have been characterized in detail using optical microscopy combined modelling, which enables a determination of the three-dimensional shape of individual fringes. 2D micro-Raman spectroscopy reveals that the space between amorphous fringes remains crystalline. We demonstrate that the fringe period can be tuned over a range of 410 nm - 13 µm by changing the angle of incidence and inverting the beam scan direction. Fine control over the lateral dimensions, thickness, surface depression and optical contrast of the fringes is obtained via adjustment of pulse number, fluence and spot size. Large-area, highly homogeneous gratings composed of amorphous fringes with micrometer width and millimeter length can readily be fabricated. The here presented fabrication technique is expected to have applications in the fields of optics, nanoelectronics, and mechatronics and should be applicable to other materials.