[Validation of Quantitative Accuracy and Variability in 177Lu Imaging Using Monte Carlo Simulation].

PURPOSE: To predict side effects and optimize injection doses in the dosimetry of 177Lu imaging, highly accurate quantitative SPECT images are required. Monte Carlo simulations were performed to verify the accuracy and variability of quantitative values for 177Lu imaging under various imaging conditions. METHOD: SPECT data of NEMA body phantom were assumed to simulate intrahepatic tumors 6 h after administration of 7.4 GBq of 177Lu-Dotatate. SPECT data were acquired using the SIMIND program with different combinations of collimators and energy windows. For variability evaluation, 30 SPECT images with Poisson noise were generated for each acquisition time. The relative error was evaluated for accuracy evaluation, and the coefficient of variation was estimated for variability evaluation. RESULTS: The accuracy of BG quantification was less than 10% relative error. The accuracy of hot sphere quantification was highest with the combination of MEGP and an energy window of 208 keV±10%. However, the accuracy of hot sphere quantification decreased significantly with decreasing hot sphere diameter. Variability varied with imaging conditions and improved with longer acquisition time. CONCLUSION: Monte Carlo simulations revealed the accuracy and variability of quantitative values for each SPECT imaging condition for 177Lu imaging.

Evaluation of two-dimensional total bone uptake (2D-TBU) and bone scan index (BSI) extracted from active bone metastatic burden on the bone scintigraphy in patients with radium-223 treatment.

OBJECTIVE: Radium-223 is a first alpha-emitting radionuclide treatment for metastatic castration-resistant prostate cancer (mCRPC) patients with bone metastases. Although the spread-based bone scan index (BSI) and novel index of the intensity-based two-dimensional total bone uptake (2D-TBU) from bone scintigraphy may provide useful input in radium-223 treatment, they have not been evaluated in detail yet. This study aimed to fill this gap by evaluating BSI and 2D-TBU in patients treated with radium-223. METHODS: Twenty-seven Japanese patients with mCRPC treated with radium-223 were retrospectively analyzed. The patients were evaluated via blood tests and bone scans at baseline and 3 cycles intervals of treatment. BSI and 2D-TBU were analyzed via VSBONE BSI in terms of correlations, response to radium-223 treatment, association with treatment completion, and the Kaplan-Meier survival analysis was performed. RESULTS: Nineteen patients (70.4%) completed six cycles of radium-223 treatment, whereas eight patients (29.6%) did not complete the treatment regimen. A significant difference in baseline BSI and 2D-TBU was observed between these groups of patients. Both BSI and 2D-TBU were highly correlated (r = 0.96, p < 0.001). Univariate analysis showed an association between radium-223 completion in median BSI and 2D-TBU values (p = 0.015) and completion percentage differences (91.7% vs. 45.5%; p = 0.027). The Kaplan-Meier product limit estimator showed that the median overall survival was 25.2 months (95% CI 14.0-33.6 months) in the completion group and 7.5 months (95% CI 3.3-14.2 months) in the without completion group (p < 0.001). The overall survival based on median cutoff levels showed a significant difference in 2D-TBU (p = 0.007), but not in BSI (p = 0.15). CONCLUSIONS: The 2D-TBU may offer advantages over BSI in classifying patients towards radium-223 treatment based on the degree of progression of bone metastases. This study supports the importance of preliminary assessment of bone metastasis status using BSI and 2D-TBU extracted from VSBONE BSI for radium-223 treatment decisions.

Reproducibility of the principal component analysis (PCA)-based data-driven respiratory gating on texture features in non-small cell lung cancer patients with 18 F-FDG PET/CT.

OBJECTIVE: Texture analysis is one of the lung cancer countermeasures in the field of radiomics. Even though image quality affects texture features, the reproducibility of principal component analysis (PCA)-based data-driven respiratory gating (DDG) on texture features remains poorly understood. Hence, this study aimed to clarify the reproducibility of PCA-based DDG on texture features in non-small cell lung cancer (NSCLC) patients with 18 F-Fluorodeoxyglucose (18 F-FDG) Positron emission tomography/computed tomography (PET/CT). METHODS: Twenty patients with NSCLC who underwent 18 F-FDG PET/CT in routine clinical practice were retrospectively analyzed. Each patient's PET data were reconstructed in two PET groups of no gating (NG-PET) and PCA-based DDG gating (DDG-PET). Forty-six image features were analyzed using LIFEx software. Reproducibility was evaluated using Lin's concordance correlation coefficient ( ρ c ${\rho _c}$ ) and percentage difference (%Diff). Non-reproducibility was defined as having unacceptable strength ( ρ c $({\rho _c}$  < 0.8) and a %Diff of >10%. NG-PET and DDG-PET were compared using the Wilcoxon signed-rank test. RESULTS: A total of 3/46 (6.5%) image features had unacceptable strength, and 9/46 (19.6%) image features had a %Diff of >10%. Significant differences between the NG-PET and DDG-PET groups were confirmed in only 4/46 (8.7%) of the high %Diff image features. CONCLUSION: Although the DDG application affected several texture features, most image features had adequate reproducibility. PCA-based DDG-PET can be routinely used as interchangeable images for texture feature extraction from NSCLC patients.

Evaluation of data-driven respiratory gating for subcentimeter lesions using digital PET/CT system and three-axis motion phantom.

Introduction.The application of data-driven respiratory gating (DDG) for subcentimeter lesions with respiratory movement remains poorly understood. Hence, this study aimed to clarify DDG application for subcentimeter lesions and the ability of digital Positron emission tomography/computed tomography (PET/CT) system combined with DDG to detect these lesions under three-axis respiration.Methods.Discovery MI PET/CT system and National Electrical Manufacturers Association (NEMA) body phantom with Micro Hollow Sphere (4, 5, 6, 8, 10, and 13 mm) were used. The NEMA phantom was filled with18F-FDG solutions of 42.4 and 5.3 kBq/ml for each hot sphere and background region. The 3.6 s cycles of three-axis respiratory motion were reproduced using the motion platform UniTraQ. The PET data acquisition was performed in stationary and respiratory-moving states. The data were reconstructed in three PET groups: stationary (NM-PET), no gating with respiratory movement (NG-PET), and DDG gating with respiratory movement (DDG-PET) groups. For image quality, percent contrast (QH); maximum, peak, and mean standardized uptake value (SUV); background region; and detectability index (DI) were evaluated in each PET group. Visual assessment was also conducted.Results.The groups with respiratory movement had deteriorated QHand SUVs compared with NM-PET. Compared with NG-PET, DDG-PET has significantly improved QHand SUVs in spheres above 6 mm. The background region showed no significant difference between groups. The SUVmax, SUVpeak, and QHvalues of 8 mm sphere were highest in NM-PET, followed by DDG-PET and NG-PET. In visual assessment, the spheres above 6 mm were detected in all PET groups. DDG application did not detect new lesions, but it increased DI and visual score.Conclusions. The application of principal component analysis (PCA)-based DDG algorithm improves both image quality and quantitative SUVs in subcentimeter lesions measuring above 6 mm. Although DDG application cannot detect new subcentimeter lesions, it increases the visual indices.

Impact of patient body habitus on image quality and quantitative value in bone SPECT/CT.

OBJECTIVE: The first edition of guidelines for standardization of bone single photon emission computed tomography (SPECT) imaging was published in 2017, and the optimization and standardization are widely promoted. To the purpose, clarification of the factors related to image quality and quantitative values and their influence are required. The present study aimed to clarify and optimize the influence of patient body habitus on image quality and quantitative values in bone SPECT/CT. METHODS: National Electrical Manufacturers Association body phantom (S-size) and custom-made large body phantoms (M-size and L-size) that simulate the abdomens of Japanese patients weighing 60, 80, and 100 kg, were used. Each phantom was filled with 99mTc-solutions of 108 and 18 kBq/mL for the hot spheres and background, respectively. Dynamic SPECT acquisition was performed for 6000 s (150 s /rotation × 40 rotation). The data were divided into six projection data and reconstructed each acquisition time (150, 300, 450, 600, 750, 900 s, and single projection 6000 s). Image quality was evaluated for contrast (QH, 17 mm), background noise (NB, 17 mm), contrast-to-noise ratio (CNR), maximum standardized uptake value (SUVmax, 17 mm), and visual assessment for a 17 mm hot sphere. RESULTS: Image quality in the 300 s acquisition showed that values of QH, 17 mm, CNR, and SUVmax, 17 mm decreased (-16.7%, -11.8%, and -11.3%) for M-size and (-28.2%, -30.1%, and -21.7%) for L-size compared with S-size, respectively. No significant difference was observed in NB, 17 mm values. M-size and L-size required 1.2 and 2.3 times longer acquisition, to achieve same CNR as S-size. In visual assessment, 17 mm hot sphere could not be detected only in the L-size. When the Japanese bone SPECT guidelines criteria were applied in 600 s, the sphere could be detected between all phantoms. CONCLUSIONS: Patient body habitus significantly affects image quality and decreases the quantitative value in bone SPECT/CT. For the optimization, extend acquisition time according to the patient body habitus is effective for image quality. And for the standardization, it is important to achieve imaging conditions that meet the Japanese bone SPECT guidelines criteria to ensure adequate detectability.

[Administration Accuracy of Automated Infusion Device for PET Using Improved Disposable Kit].

PURPOSE: The AI-300 automated infusion device (Sumitomo Heavy Industries, Ltd., Tokyo, Japan) is subject to administration error as a function of smaller volumes of 18F-FDG dispensed via a three-way cock supplied with a disposable kit. The present study aimed to validate the administration accuracy of the AI-300 using an improved disposable kit for quantitative positron emission tomography (PET) assessment. METHODS: We determined administration accuracy between the improved and previous disposable kits by measuring variations in dispensed volumes and radioactive concentrations of 18F-FDG according to the criteria of the Japanese Society of Nuclear Medicine. A reference value was generated by measuring radioactivity using a standard dose calibrator. RESULTS: The values obtained using the previous kit deviated from the reference values by a maximum of -10.6%, and the deviation depended on dispensed volumes of 18F-FDG<0.25 mL. In contrast, the values were relatively stable when using the improved kit with dispensed 18F-FDG volumes < 0.25 mL. Variations in radioactive concentrations were relatively stable using the improved kit, whereas that of the previous kit was slightly unstable at high radioactive concentrations. CONCLUSION: The administration accuracy of the AI-300 using the previous kit varied considerably according to smaller dispensed volumes, but the improved kit might alleviate this problem. The present results indicated that the improved disposal kit should be immediately implemented to eliminate uncertainty surrounding quantitative PET findings.

Evaluation of bone metastatic burden by bone SPECT/CT in metastatic prostate cancer patients: defining threshold value for total bone uptake and assessment in radium-223 treated patients.

OBJECTIVES: To establish a new three-dimensional quantitative evaluation method for bone metastasis, we applied bone single photon emission tomography with computed tomography (SPECT/CT). The total bone uptake (TBU), which measures active bone metastatic burden, was calculated as the sum of [mean uptake obtained as standardized uptake value (SUV) above a cut-off level] × (the volume of the lesion) in the trunk using bone SPECT/CT. We studied the threshold value and utility of TBU in prostate cancer patients treated with radium-223 (Ra-223) therapy. METHODS: To establish the threshold value of TBU, we compared bone metastatic and non-metastatic regions in 61 prostate cancer patients with bone metastasis and 69 without. Five fixed sites in each patient were selected as evaluation points and divided into bone metastatic and non-metastatic sites. Sensitivity and specificity analysis was applied to establish the threshold level. Using the obtained threshold value, we then calculated the TBU in nine prostate cancer patients who received Ra-223 therapy, and compared the results with the bone scan index (BSI) by BONENAVI® and visual evaluation of bone scintigraphy. RESULTS: Uptake was significantly lower in non-metastatic sites in patients with bone metastasis than in patients without metastasis. Sensitivity and specificity analysis revealed SUV = 7.0 as the threshold level. There was a discrepancy between TBU and BSI change in two of the nine patients, in whom TBU change correlated with visual judgement, but BSI change did not. In two patients, BSI was nearly 0 throughout the course, but the TBU was positive and changed, although the change was not large. These results suggest that TBU may be more accurate and sensitive than BSI for quantitative evaluation of active bone metastatic burden. CONCLUSION: We established a threshold value (SUV > 7.0) for three-dimensional TBU for evaluating active bone metastatic burden in prostate cancer patients using bone SPECT/CT. Despite the small number of patients, we expect the change in TBU could be more accurate and sensitive than the change in BSI among patients who received Ra-223.

Validation of Cross-calibration Schemes for Quantitative Bone SPECT/CT Using Different Sources under Various Geometric Conditions.

PURPOSE: Several cross-calibration schemes have been proposed to produce quantitative values in bone SPECT imaging. Differences in the radionuclide sources and geometric conditions can decrease the accuracy of cross-calibration factor (CCF). The present study aimed to validate the effects of calibration schemes using different sources under various geometric conditions. METHODS: Temporal variations as well as variations in acquisition counts and the shapes of 57Co standard and 99mTc point sources and a 99mTc disk source were determined. The effects of the geometric conditions of the source-to-camera distance (SCD) and lateral distance on the CCF were investigated by moving the camera or source away from the origin. The system planar sensitivity of NEMA incorporated into a Symbia Intevo SPECT/CT device (Siemens®) was defined as reference values. RESULTS: The temporal variation in CCF using the 57Co source was relatively stable within the range of 0.7% to 2.3%, whereas the 99mTc source ranged from 2.7% to 7.3%. In terms of source shape, the 57Co standard point source was the most stable. Both SCD and lateral distance decreased as a function of distance from the origin. Errors in the geometric condition were higher for the 57Co standard point source than the 99mTc disk source. CONCLUSIONS: Different calibration schemes influenced the reliability of quantitative values. The 57Co standard point source was stable over a long period, and this helped to maintain the quality of quantitative SPECT/CT imaging data. The CCF accuracy of the 99mTc source decreased depending on the preparative method. The method of calibration for quantitative SPECT should be immediately standardized to eliminate uncertainty.