Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 9 de 9
Filter
Add more filters










Database
Language
Publication year range
1.
Sci Rep ; 14(1): 12453, 2024 Jun 07.
Article in English | MEDLINE | ID: mdl-38849379

ABSTRACT

The use of deicers in urban areas, on runways and aircrafts has raised concerns about their environmental impact. Understanding the ice-melting mechanism is crucial for developing environmentally friendly deicers, yet it remains challenging. This study employs machine learning to investigate the ice penetration capacity (IPC) of 21 salts and 16 organic solvents as deicers. Relationships between their IPC and various physical properties were analysed using extreme gradient boosting (XGBoost) and Shapley additive explanation (SHAP). Three key ice-melting mechanisms were identified: (1) freezing-point depression, (2) interactions between deicers and H2O molecules and (3) infiltration of ions into ice crystals. SHAP analysis revealed different ice-melting factors and mechanisms for salts and organic solvents, suggesting a potential advantage in combining the two. A mixture of propylene glycol (PG) and sodium formate demonstrated superior environmental impact and IPC. The PG and sodium formate mixture exhibited higher IPC when compared to six commercially available deicers, offering promise for sustainable deicing applications. This study provides valuable insights into the ice-melting process and proposes an effective, environmentally friendly deicer that combines the strengths of organic solvents and salts, paving the way for more sustainable practices in deicing.

2.
ACS Omega ; 9(1): 1084-1091, 2024 Jan 09.
Article in English | MEDLINE | ID: mdl-38222510

ABSTRACT

Adsorbents are used to recover water vapor from the atmosphere in desiccant air conditioning (DAC) and atmospheric water harvesting (AWH) systems. Solid adsorbents have been conventionally used in these systems, though liquid adsorbents are considered to be more effective for energy-efficient fluidic thermosystems because of their low regeneration temperatures (45-70 °C). While most previous studies have focused on improving the adsorption performance, the desorption performance of adsorbents can also be a critical factor in improving the energy efficiency of these systems. Thus, this study aimed to improve the water desorption efficiency, focusing on the liquid adsorbents. We found that mixing hydrophobic molecules into a liquid adsorbent decreases the desorption temperature and increases the water-desorption efficiency. Oligomeric poly(ethylene glycol) (PEG), a common moisture-adsorbing liquid oligomer used in detergents and cosmetics, was selected as the liquid adsorbent. Oligomeric poly(propylene glycol) (PPG), which has a structure analogous to PEG and lower hygroscopicity, was selected as the hydrophobic molecule. Water adsorption and desorption experiments showed that the mixture of PPG with PEG promoted the desorption of water molecules beyond that of PEG, while thermogravimetric differential thermal analysis revealed a decrease in the water desorption temperature with increasing PPG content. The improved desorption efficiency was ascribed to the likely water adsorption equilibrium between PEG and PPG in the blend; water molecules are preferentially desorbed from PPG, which has weaker water-adsorbate interactions. The proposed concept is expected to be incorporated into various hygroscopic liquids to develop energy-efficient liquid adsorbents for DAC and AWH.

3.
Nanoscale Adv ; 5(6): 1795-1801, 2023 Mar 14.
Article in English | MEDLINE | ID: mdl-36926578

ABSTRACT

The development of metal-organic framework (MOF) thin films with various functionalities has paved the way for research into a wide variety of applications. MOF-oriented thin films can exhibit anisotropic functionality in the not only out-of-plane but also in-plane directions, making it possible to utilize MOF thin films for more sophisticated applications. However, the functionality of oriented MOF thin films has not been fully exploited, and finding novel anisotropic functionality in oriented MOF thin films should be cultivated. In the present study, we report the first demonstration of polarization-dependent plasmonic heating in a MOF oriented film embedded with Ag nanoparticles (AgNPs), pioneering an anisotropic optical functionality in MOF thin films. Spherical AgNPs exhibit polarization-dependent plasmon-resonance absorption (anisotropic plasmon damping) when incorporated into an anisotropic lattice of MOFs. The anisotropic plasmon resonance results in a polarization-dependent plasmonic heating behavior; the highest elevated temperature was observed in case the polarization of incident light is parallel to the crystallographic axis of the host MOF lattice favorable for the larger plasmon resonance, resulting in polarization-controlled temperature regulation. Such spatially and polarization selective plasmonic heating offered by the use of oriented MOF thin films as a host can pave the way for applications such as efficient reactivation in MOF thin film sensors, partial catalytic reactions in MOF thin film devices, and soft microrobotics in composites with thermo-responsive materials.

4.
Angew Chem Int Ed Engl ; 61(28): e202201725, 2022 Jul 11.
Article in English | MEDLINE | ID: mdl-35476366

ABSTRACT

The degree of pore filling is an important parameter for defining guest@MOF properties in applications including electronics, optics, and gas separation. However, the interplay of key aspects of host-guest interactions, such as a quantitative description of the guest alignment or the structural integrity of the host as function of pore filling are yet to be determined. Polarisation-dependent infrared spectroscopy in attenuated total reflection configuration combined with gas sorption allowed to simultaneously study the orientation of the guest molecule and structural changes of the MOF framework during the pore filling process. Thereby we found, that initially randomly oriented guest molecules align with increasing pore filling during adsorption from the gas phase. At the same time, the framework itself undergoes a reversible, guest molecule-dependent rotation of the aromatic linker and a linker detachment process, which induce defects.

5.
Inorg Chem ; 60(11): 7641-7649, 2021 Jun 07.
Article in English | MEDLINE | ID: mdl-33400861

ABSTRACT

Hydroxylation of cyclohexane with m-chloroperbenzoic acid was examined in the presence of an iron(III) complex supported by a trianionic planar tetradentate ligand. The present reaction system shows a high turnover number of 2750 with a high product selectivity of alcohol (93%). The turnover frequency was 0.51 s-1, and the second-order rate constant (k) for the C-H bond activation of cyclohexane was 1.08 M-1 s-1, which is one of the highest values among the iron complexes in the oxidation of cyclohexane so far reported. The present catalytic system can be adapted to the hydroxylation of substrates having only primary C-H bonds such as 2,2,3,3-tetramethylbutane as well as gaseous alkanes such as butane, propane, and ethane. The involvement of an iron(III) acyl peroxido complex as the reactive species was suggested by spectroscopic measurements of the reaction solution.

6.
Chem Commun (Camb) ; 56(38): 5123-5126, 2020 May 11.
Article in English | MEDLINE | ID: mdl-32297615

ABSTRACT

A mononuclear copper complex bearing a 'histidine brace' is synthesised and characterised as an active-site model of mononuclear copper monooxygenases such as lytic polysaccharide monooxygenases (LPMOs) and particulate methane monooxygenase (pMMO). The complex has similar structural and functional features to the active sites of the enzymes.


Subject(s)
Copper/chemistry , Histidine/chemistry , Mixed Function Oxygenases/chemistry , Multienzyme Complexes/chemistry , Copper/metabolism , Histidine/metabolism , Mixed Function Oxygenases/metabolism , Models, Molecular , Molecular Structure , Multienzyme Complexes/metabolism
7.
Chem Sci ; 11(44): 12206-12211, 2020 Oct 12.
Article in English | MEDLINE | ID: mdl-34094432

ABSTRACT

Hydroxyalkylation of N-heteroaromatics with aldehydes was achieved using a binary hybrid catalyst system comprising an acridinium photoredox catalyst and a thiophosphoric acid organocatalyst. The reaction proceeded through the following sequence: (1) photoredox-catalyzed single-electron oxidation of a thiophosphoric acid catalyst to generate a thiyl radical, (2) cleavage of the formyl C-H bond of the aldehyde substrates by a thiyl radical acting as a hydrogen atom transfer catalyst to generate acyl radicals, (3) Minisci-type addition of the resulting acyl radicals to N-heteroaromatics, and (4) a spin-center shift, photoredox-catalyzed single-electron reduction, and protonation to produce secondary alcohol products. This metal-free hybrid catalysis proceeded under mild conditions for a wide range of substrates, including isoquinolines, quinolines, and pyridines as N-heteroaromatics, as well as both aromatic and aliphatic aldehydes, and tolerated various functional groups. The reaction was applicable to late-stage derivatization of drugs and their leads.

8.
J Am Chem Soc ; 139(6): 2204-2207, 2017 02 15.
Article in English | MEDLINE | ID: mdl-28139917

ABSTRACT

Hybrid catalyst systems to achieve acceptorless dehydrogenation of N-heterocycles and tetrahydronaphthalenes-model substrates for liquid organic hydrogen carriers-were developed. A binary hybrid catalysis comprising an acridinium photoredox catalyst and a Pd metal catalyst was effective for the dehydrogenation of N-heterocycles, whereas a ternary hybrid catalysis comprising an acridinium photoredox catalyst, a Pd metal catalyst, and a thiophosphoric imide organocatalyst achieved dehydrogenation of tetrahydronaphthalenes. These hybrid catalyst systems allowed for 2 molar equiv of H2 gas release from six-membered N-heterocycles and tetrahydronaphthalenes under mild conditions, i.e., visible light irradiation at rt. The combined use of two or three different catalyst types was essential for the catalytic activity.

9.
Sci Rep ; 4: 5327, 2014 Jun 17.
Article in English | MEDLINE | ID: mdl-24937471

ABSTRACT

The electrochemical detection of metal complexes in the photoexcited state is important for understanding photoinduced electron transfer (PET) processes, which play a central role in photo-energy conversion systems. In general, however, the redox potentials of excited states have been indirectly estimated by a combination of spectroscopic properties and ground-state redox potentials. To establish a simple method for directly determining the redox potentials of the photoexcited states of metal complexes, electrochemical measurements under several conditions were performed. The electrochemical response was largely influenced not only by the generation of photoexcited molecules but also by the convection induced by photoirradiation, even when the global temperature of the sample solution was unchanged. The suppression of these unfavourable electrochemical responses was successfully achieved by adopting well-established electrochemical techniques. Furthermore, as an initial demonstration, the photoexcited state of a Ru-based metal complex was directly detected, and its redox potential was determined using a thin layer electrochemical method.

SELECTION OF CITATIONS
SEARCH DETAIL
...