Clinical and radiographic outcomes of primary total hip arthroplasty with the revelation hip system using density mapping.

The Revelation Hip System is a cementless stem with a lateral flare concept. Stable fixation is achieved by fitting the stem to the medullary cavity of the proximal lateral femoral cortex. Patients who have undergone total hip arthroplasty using the Revelation Hip System show good postoperative clinical and radiographic outcomes. However, to the best of our knowledge, no study has reported the relationship between stem fitting and clinical or radiological outcomes after the surgery. In the present study, we investigated the relationship between stem fitting and clinical or radiological outcomes after total hip arthroplasty (THA) using the Revelation Hip System. In this study, 28 hips of 26 patients who were treated with the Revelation Hip System for osteoarthritis, osteonecrosis of the femoral head, rheumatoid arthritis, and rapidly destructive coxarthropathy and were followed up for > 5 y were enrolled. These patients were divided into two groups, including the rest fit group (11 hips, group R) and the control group (17 hips, group C), according to the results of the density mapping analysis. In group R, the lateral side of the stem fits on the medullary cavity of the proximal lateral femoral cortex, while in group C, the lateral side of the stem did not fit. Radiographic results showed no significant differences between the groups in terms of stem alignment, subsidence, and stress shielding around the cup. The incidence of stress shielding around the stem in zone 7 was not significant but tended to be higher in group R than in group C (p = 0.052). Clinical outcomes showed no significant differences between group R and group C in terms of the Harris hip score, the Japanese Orthopaedic Association (JOA) score, and the Japanese Orthopaedic Association Hip Disease Evaluation Questionnaire (JHEQ) total score. However, pain complaints that were assessed by patient-reported outcomes using the 36-Item Short Form Health Survey (SF-36) bodily pain and vitality subscales and the JHEQ pain subscale were significantly higher in group R than in group C at the final follow-up. These results suggest that some patients had pain complaint even if the stems were inserted as per the concept after THA with the Revelation Hip System.Trial Registration911.

Differences among the observers in the assessments of Japanese orthopedic association hip scores between surgeons and physical therapists and the correlations to patients' reported outcomes after total hip arthroplasty.

BACKGROUND: We aimed to assess the utility of a clinician-reported outcome (the Japanese Orthopedic Association [JOA] hip score) as evaluated by clinicians and physiotherapists. This assessment was made by comparing these scores to those of the JOA hip disease evaluation questionnaire (JHEQ), which is a measurement of patient-reported outcomes after total hip arthroplasty. METHODS: In this retrospective case-control study, 52 hips that underwent primary total hip arthroplasty were included in the analyses. The mean age of the participants was 66.8 years (sex, seven male and 45 female participants). The JOA hip score included four categories: pain, range of motion, ability to walk, and active daily living. The JHEQ included three categories: pain, movement, and mental health. These scores were evaluated preoperatively and postoperatively by clinicians or physiotherapists. Pearson's correlation coefficients were utilized to analyze the association of the JOA hip scores to those of the JHEQ. RESULTS: The JOA hip scores were determined by clinicians and physiotherapists (scores of 46.8 and 57.3, respectively) preoperatively and at 24 months (scores of 94.4 and 91.7, respectively) postoperatively. The JHEQ points were 28.8 and 66.2 preoperatively and at 24 months postoperatively, respectively. The correlation coefficients between the JOA hip and JHEQ scores were .66 and .69 preoperatively and .57 and .76 at 24 months postoperatively, as evaluated by clinicians and physiotherapists, respectively. CONCLUSIONS: Although the JHEQ scores were positively correlated to the JOA hip scores by clinicians and physiotherapists preoperatively and postoperatively, this study implies that clinicians may interpret the results in a way that might have been beneficial to them. To comprehend a patients' health status, we should inclusively understand the varying range of information among different evaluators.

Volar RIM Plate Rarely Causes Flexor Tendon Complications in a Short Period Despite Its Plate Prominence over the Watershed Line: A Descriptive Study.

Background: The DePuy Synthes variable angle LCP® Volar RIM Plate has been designed with its contour to overhang volar rim fragments of the distal radius to prevent secondary displacement after fracture fixation. Therefore, RIM potentially contributes to a risk of flexor tendon rupture due to its plate prominence over the watershed line. This is a retrospective cross-sectional study that aims at describing the occurrence of complications by utilizing RIM as well as three standards VLPs to evaluate the impact of plate design on flexor tendons. Methods: A total of 84 patients with a volar locking plate fixation were analyzed retrospectively (Far-distal; RIM: 14 cases, Juxta-articular; AcuLoc2 (ACUMED): 20 cases, Dual-Loc V7 (MEIRA): 25 cases, Extra-articular; VA-TCP (DePuy Synthes): 25 cases). Tendinous problems were evaluated with a reported adverse event and flexor tendon appearance examined by utilizing ultrasonography and direct observation during hardware removal. Plate prominence was graded according to Soong's classification and the distance to flexor tendons was measured to describe the risk that each plate damage the flexor tendons. Results: The mean follow-up period was 13.0 months. All RIM plates were placed in grade 2 (85.7%) and grade 1 (14.3%). Symptomatic and asymptomatic tendinous problems were barely reported in RIM. The examination of ultrasonography and direct observation during hardware removal showed that tendons smoothly slid without attrition on the curved plate surface of RIM despite their adjacent appositions came from its high and distal plate prominence. Conclusions: Smooth profile of RIM showed an ability to decrease the potential risk of flexor tendon damage regardless of its prominence over the watershed line. RIM can be applied more to challenging far distal fractures when used judiciously and surgeons need to be even more vigilant for symptoms of tendon irritation as usually recommended without being coward more than necessary.

Radiographic analysis of subclinical appearances of the hip joint among patients with labral tears.

OBJECTIVE: Labral tears can be complicated by hip diseases, including osteoarthritis or femoral acetabular impingement. To accurately plan hip arthroscopy or subsequent conversion to total hip arthroplasty, the presence of bony abnormalities in the hip joint must be evaluated. This study aimed to elucidate the utility of multiplanar reconstruction computed tomography (mCT) for the detection of subclinical coincidence of osteoarthritis or femoral acetabular impingement with a labrum tear. MATERIALS AND METHODS: We retrospectively analysed 34 patients (36 hips) with labrum tears without apparent osteoarthritis or hip dysplasia from 2012 to 2015. The joint spaces were calculated using radiographs or mCT, and the detection rates of degenerative cyst and herniation pit were compared. RESULTS: Narrow joint spaces (< 2 mm) were more clearly detected in mCT (p < 0.05, chi-square analysis) than in radiographs. The detection rate of cysts in the acetabulum was 8.3% using radiographs and 36.1% using mCT (p < 0.001, chi-square analysis). Additionally, the detection of herniation pit was 8.3% and 25.0% using radiographs and mCT, respectively (p = 0.053, chi-square analysis). CONCLUSION: We performed the radiographic analysis of patients with labral tears using radiographs and mCT. The mCT allowed for fine detection of narrow joint spaces and subtle subclinical appearances. The results of this study may provide surgeons with more appropriate strategies for the treatment of labral tears.

Advantages of an on-the-screwhead crosslink connector for atlantoaxial fixation using the Goel/Harms technique.

The goal of fixation surgery for atlantoaxial instability is to achieve solid bony fusion. Achieving bony fusion as early as possible is beneficial for patients. Although placement of a transverse cross-link connector (XL) provides greater biomechanical strength, XLs have not been able to be placed when performing the Goel/Harms procedure. Recently, placing a XL on the screw head (on-the-head XL [OH-XL]) has become a viable option during the Goel/Harms procedure. However, there is little evidence demonstrating whether applying an OH-XL achieves early solid bony union. A matched-control study was conducted to investigate whether placing an OH-XLs in C1/2 fixation surgery provides earlier bone union or not. Eighteen patients who underwent atlantoaxial fusion with OH-XLs (X-group), and 17 age and sex-matched patients without OH-XLs (NX-group) were compared. Bony union was assessed using reconstructed sagittal and coronal computed tomography images. Six months after surgery, six patients in the X-group and one patient in the NX-group achieved bony union (p = .0338). One year after surgery, 14 patients in the X-group and 4 patients in the NX-group achieved bone union (p = .0010). Two years after surgery, 17 patients in the X-group and 9 patients in the NX-group achieved bony union (p = .0011). This is the first report of the clinical application of OH-XLs for the Goel/Harms procedure. OH-XLs yield earlier bony fusion; thus, placing OH-XLs is beneficial for atlantoaxial fixation surgery using lateral mass screws of the atlas.

Temporary Internal Fixation Using C1 Lateral Mass Screw and C2 Pedicle Screw (Goel-Harms Technique) without Bone Grafting for Chronic Atlantoaxial Rotatory Fixation.

BACKGROUND: The primary treatment strategy for chronic atlantoaxial rotatory fixation (chro-AARF) is traction followed by bracing or application of a halo device. However, to complete these conservative therapies, patient cooperation is mandatory. If conservative therapy fails, surgery is required for reduction and prevention of recurrence. It has been considered that surgery for atlantoaxial rotatory fixation necessitates solid bony fusion. However, once bony fusion is achieved, loss of range of motion is problematic. Here, we report a patient with chro-AARF who was successfully treated with temporary internal fixation using a C1 lateral mass screw and C2 pedicle screw (Goel-Harms technique) without any grafting of bone or use of bone substitute materials. CASE DESCRIPTION: A 9-year-old boy with chro-AARF was referred to our institution. He had a history of pervasive developmental disorders. He did not cooperate for the completion of conservative therapy and could not tolerate this therapy. Therefore, the orthopedic staff and his parents considered surgery. Under general anesthesia, reduction was easily performed. The Goel-Harms screw-rod construct was completed as a temporary internal fixator without any grafting of bone or use of bone substitute materials. After 6 months, the screw-rod construct was removed. Removal of the screw-rod construct was performed easily without complication. There was no ankylosis of the C1-2 joint, and cervical range of motion was maintained 2.8 years after removal of the construct. CONCLUSIONS: When conservative therapy cannot be continued, Goel-Harms surgery as a temporary internal fixator without bone grafting might be a suitable alternative for selected patients with chro-AARF.

Surgical Management of the Pregnant Patient With Lumbar Disc Herniation in the Latter Stage of the Second Trimester.

STUDY DESIGN: Case report. OBJECTIVE: To report on a pregnant woman successfully treated with microendoscopic discectomy in the left lateral position under general anesthesia at 24-week gestation. SUMMARY OF BACKGROUND DATA: Treatment for lumbar disc herniation in pregnant women poses a particular challenge due to the complexity of the clinical situation. Review of the literature emphasizes timely diagnosis with adequate management specific for each gestational period. A surgical approach mandates consideration of the physiologic parameters of pregnancy and the effects of these stressors on the fetus. METHODS: A 38-year-old primigravid woman presented with persistent and incapacitating low back and left leg pain. Magnetic resonance imaging demonstrated a herniated disc at L4-5 with a severely compressed left L5 nerve root. Symptoms were resistant to conservative treatment (acetaminophen; 1200 mg/day) and nerve root block with corticosteroids (1 mg/0.5 mL of betamethasone plus 0.5 mL of 1% lidocaine) provided only transient pain relief. Operative management with surgical discectomy was discussed. Anesthesiologists, obstetricians, and neonatologists were consulted for preoperative planning, focusing on appropriate anesthesia, ideal positioning for surgical access, and provision for emergent fetal care. Surgery was ultimately performed in the left lateral position, in contrast to the oft-used prone position. Microendoscopic discectomy was performed under general anesthesia at 24-week gestation. RESULTS: The patient experienced complete relief from pain after surgical intervention and delivered a healthy baby at 39-week gestation after normal labor. Our methods, used in accordance with our preoperative simulation, resulted in a satisfactory outcome for both mother and child. CONCLUSION: Although previously published cases noted the safety of operating in the prone position under epidural anesthesia, we performed minimally invasive microendoscopic discectomy in the left lateral position in combination with general anesthesia and found that this is a safe and preferable alternative for pregnant patients in the latter stage of the second trimester. LEVEL OF EVIDENCE: N/A.

Unphosphorylated heat shock protein 27 suppresses fibroblast growth factor­2­stimulated vascular endothelial growth factor release in osteoblasts.

Heat shock protein 27 (HSP27) also known as heat shock protein ß1 (HSPB1) is a member of the family of small heat shock proteins ubiquitously expressed in all tissues. It has previously been demonstrated that HSP27 regulated the synthesis of osteocalcin and interleukin­6 in osteoblast­like MC3T3­E1 cells. In the present study, the effect of HSP27 on basic fibroblast growth factor (FGF­2)­stimulated vascular endothelial growth factor (VEGF) synthesis in MC3T3­E1 cells, was observed. The levels of VEGF release stimulated by FGF­2 in the HSP27­overexpressing MC3T3­E1 cells were significantly lower compared with those in the control cells. In addition, the levels of VEGF release stimulated by FGF-2 in the phosphomimic HSP27-overexpressing cells were significantly higher compared with those in the non­phosphorylatable HSP27­overexpressing cells. Furthermore, no significant differences were observed in the FGF­2­induced phosphorylation levels of p44/p42 mitogen­activated protein (MAP) kinase, p38 MAP kinase, stress­activated protein kinase/c­Jun N­terminal kinase (SAPK/JNK) or p70 S6 kinase among the four types of transfected cells. These results suggested that unphosphorylated HSP27 attenuated the FGF­2­stimulated VEGF synthesis in osteoblasts.

Relationship between screw trajectory of C1 lateral mass screw and internal carotid artery.

STUDY DESIGN: Evaluation of diagnostic imaging. OBJECTIVE: To comprehend anatomic relationships between the internal carotid artery (ICA) and bicortical purchase of C1 lateral mass screws from the perspective of avoiding ICA injury. SUMMARY OF BACKGROUND DATA: No studies have evaluated safety trajectory of atlantal lateral mass screw that would avoid the ICA injury in relation to its location, although previous studies have indicated concern about ICA injury by the screw tip at the anterior surface of the lateral mass of the atlas. METHODS: From 149 of 177 human 3-dimensional computed tomography reconstruction images, 6 distance and 2 angle parameters related to both atlas and ICA were measured on the plane 15 degrees cephalad to the transverse plane. In addition, angle of error during screw insertion from intended trajectory was checked. RESULTS: The ICA was located in front of the C1 lateral mass in 64.4% of cases and faced the lateral one third of the C1 lateral mass in 54.6% of cases. None were located in front of the medial one third of the C1 lateral mass. The maximum inward screw trajectory that would violate the ICA was 8.6 degrees . Mean angle of preoperative C1/2 rotation and angle of error from intended trajectory was about 5 degrees , respectively. CONCLUSION: The possibility of ICA injury can be excluded by correct insertion of the screw 10 degrees inward. Although bicortical purchase with adequately medially angulated trajectory might be safe enough, we must remember the possibility to violate the ICA in bicortical purchase, because the intended screw trajectory never be assured.

Application of full-scale three-dimensional models in patients with rheumatoid cervical spine.

Full-scale three-dimensional (3D) models offer a useful tool in preoperative planning, allowing full-scale stereoscopic recognition from any direction and distance with tactile feedback. Although skills and implants have progressed with various innovations, rheumatoid cervical spine surgery remains challenging. No previous studies have documented the usefulness of full-scale 3D models in this complicated situation. The present study assessed the utility of full-scale 3D models in rheumatoid cervical spine surgery. Polyurethane or plaster 3D models of 15 full-sized occipitocervical or upper cervical spines were fabricated using rapid prototyping (stereolithography) techniques from 1-mm slices of individual CT data. A comfortable alignment for patients was reproduced from CT data obtained with the patient in a comfortable occipitocervical position. Usefulness of these models was analyzed. Using models as a template, appropriate shape of the plate-rod construct could be created in advance. No troublesome Halo-vests were needed for preoperative adjustment of occipitocervical angle. No patients complained of dysphasia following surgery. Screw entry points and trajectories were simultaneously determined with full-scale dimensions and perspective, proving particularly valuable in cases involving high-riding vertebral artery. Full-scale stereoscopic recognition has never been achieved with any existing imaging modalities. Full-scale 3D models thus appear useful and applicable to all complicated spinal surgeries. The combination of computer-assisted navigation systems and full-scale 3D models appears likely to provide much better surgical results.

Safe atlantoaxial fixation using a laminar screw (intralaminar screw) in a patient with unilateral occlusion of vertebral artery: case report.

STUDY DESIGN: A case of atlantoaxial fusion using an intralaminar (unilateral-crossing laminar screw) screw is presented in a patient with unilateral vertebral artery communication with the basilar artery. OBJECTIVES: To document the significance of the intralaminar screw technique in the aforementioned case. SUMMARY OF BACKGROUND DATA: Vertebral artery injury is directly linked with intraoperative or perioperative death if the vertebral artery communicates only unilaterally to the basilar artery or has an obvious dominant side. In this situation, irrespective of whether the pedicle is confirmed to be sufficient for pedicle screw placement, if the vertebral artery is violated, fatal complications will occur. The literature reports that even proficient surgeons cannot guarantee 100% accuracy in pedicle screw placement. The intralaminar screw technique is currently the safest with regard to avoiding violation of the vertebral artery. Biomechanical studies have also shown this technique to ensure sufficient strength. METHODS: The patient had rheumatoid atlantoaxial subluxation, and the right vertebral artery alone communicated with basilar artery, while the left ended blind. She underwent atlantoaxial fixation with an intralaminar screw (unilateral-crossing laminar screw) of the axis and lateral mass atlas screws inserted via the posterior arch. RESULTS: The intralaminar screw (unilateral-crossing laminar screw) was completed, and comprised lateral mass atlas screws and rods. There were no complications during and after surgery. Good bone union was achieved. CONCLUSION: Patients with unilateral dominant vertebral artery are good candidates for the intralaminar screw technique, even if the pedicle anatomy is sufficient to insert pedicle screws.

The inhibitory effect of disease-modifying anti-rheumatic drugs and steroids on gliostatin/platelet-derived endothelial cell growth factor production in human fibroblast-like synoviocytes.

Gliostatin/platelet-derived endothelial cell growth factor (GLS/PD-ECGF) is known to have both angiogenic and arthritogenic activities. The purpose of this study was to investigate whether disease-modifying anti-rheumatic drugs (DMARDs) and steroids are involved in the regulation of GLS expression. Fibroblast-like synoviocytes (FLSs) obtained from patients with rheumatoid arthritis (RA) were cultured and stimulated by interleukin (IL)-1beta with or without DMARDs and steroids. The expression levels of GLS were determined using the reverse transcription-polymerase chain reaction and an ELISA. In cultured rheumatoid FLSs, the expression of GLS mRNA was significantly increased by stimulation with IL-1beta. By contrast, GLS mRNA levels in IL-1beta-stimulated FLSs were reduced by treatment with aurothioglucose (AuTG) and dexamethasone (DEX). These findings indicate that AuTG and DEX have anti-rheumatic activity, which is mediated via the suppression of GLS production. Neither methotrexate (MTX) nor sulfasalazine (SSZ) had a significant influence on GLS levels in our study.

Inhibition of recombinant dipeptidyl peptidase III by synthetic hemorphin-like peptides.

In order to find the most effective antagonist for dipeptidyl peptidase III degrading enkephalin, we synthesized hemorphin-like pentapeptides with aliphatic or aromatic amino acids at the N-termini, such as VVYPW, LVYPW, IVYPW, YVYPW, FVYPW and WVYPW. Among those pentapeptides, IVYPW and WVYPW showed the strongest inhibitory activity toward rDPP III. The K(i) values of IVYPW and WVYPW were 0.100+/-0.011 and 0.126+/-0.015 microM (mean+/-S.E.), respectively. The order of K(i) values was Ile> or =Trp>Phe> or =Tyr>Leu>Ala>Val>Ser>Gly. rDPP III activity is inhibited in a non-competitive manner by these peptides. The peptide VYPW did not inhibit rDPP III activity, but the sequence is essential for the expression of inhibitory activity.

Syringomyelia caused by loosening of multistrand cables following C1-2 Brooks-type fusion in the rheumatoid cervical spine. Case report.

The authors report a very rare case of syringomyelia caused by loosening of multistrand cable wires following C1-2 Brooks-type fusion in a 36-year-old woman with a 13-year history of rheumatoid arthritis (RA). The syrinx vanished immediately after removal of the cables, and 2 years later no recurrence of symptoms or deterioration has occurred. The authors contend that multistrand titanium cables should not be used to fix a graft-assisted C1-2 construct in patients with RA, although this material is good for fixing rods. The phenomenon observed in this case adds to our understanding of the pathogenesis of noncommunicating syringomyelia.

A rare case of lumbosacral meningioma: nondural attachment and possible enlargement by orally administered sex steroid.

STUDY DESIGN: A case report is presented. OBJECTIVES: To present a very rare case of orally ingested sex hormone pills inducing nondurally attached meningioma in the lumbosacral region. SUMMARY OF BACKGROUND DATA: Meningiomas are known to enlarge in response to female sex hormones. At this writing, few cases of nondurally based intradural meningioma have been reported. Moreover, meningiomas in the lumbosacral region are very rare. Spinal meningiomas predominantly arise in the fourth to sixth decades of life and are more common in women. METHODS: The patient was a 20-year-old woman. She had undergone oral sex steroid therapy for long-term oligomenorrhea. The patient complained of intolerable lumbago and numbness in her buttocks. Nonopioid analgesics did not relieve her pain, and she was unable to walk without the aid of a walker. Radiography disclosed a lumbosacral intradural tumor. RESULTS: Complete removal of the tumor was performed. The tumor was not adherent to the dura, and its appearance was that of a typical neurilemmoma. However, the pathologic diagnosis was meningioma. CONCLUSIONS: The tumor in the reported case may have enlarged in response to orally ingested sex steroid pills. Nondural attachment intradural meningiomas are quite uncommon. The gross appearance of the tumor during surgery was typical of neurilemmoma. All the cases reported so far, including the current case, have involved tumor located in the lumbosacral region. Care must be taken in the management of lumbosacral intradural tumors because tumors resembling neurilemmoma may in fact represent meningioma, some subtypes of which possess a high rate of recurrence.