Self-Emulsifying Drug Delivery System for Enhanced Oral Delivery of Tenofovir: Formulation, Physicochemical Characterization, and Bioavailability Assessment.

Tenofovir (TNF) is a common component of many antiretroviral therapy regimens, but it is associated with poor membrane permeability and low oral bioavailability. To improve its oral bioavailability and membrane permeability, a self-emulsifying drug delivery system (SEDDS) was developed and characterized, and its relative bioavailability was compared to the marketed tablets (Tenof). Based on solubility and ternary phase diagram analysis, eucalyptus oil was selected as an oil phase, Kolliphor EL, and Kollisolv MCT 70 were chosen as surfactant and cosurfactant, respectively, while glycerol was used as cosolvent in surfactant mixture. Optimized SEDDS formulation F6 showed an oil droplet size of 98.82 nm and zeta potential of -13.03 mV, indicating the high stability of oil droplets. Differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy characterization studies were also carried out to assess the amorphous and morphological states of the drug in the prepared SEDDS formulation. The in vitro dissolution profile of SEDDS shows the rapid release of the drug. SEDDS F6 demonstrates a higher drug permeability than the plain TNF and TNF-marketed tablets (Tenof). A pharmacokinetic study in rats revealed that SEDDS F6 showed significantly higher Cmax and AUC0-t than the marketed tablets and pure drug suspension. In addition, the relative bioavailability of SEDDS formulation dramatically improved by 21.53-fold compared to marketed tablets and 66.27-fold compared to pure drugs. These findings show that SEDDS composed of eucalyptus oil, glycerol, Kolliphor EL, and Kollisolv MCT 70 could be a useful tool for enhancing physiochemical properties and oral TNF absorption. Therefore, SEDDS has shown promise in improving the oral bioavailability of poorly water-soluble drugs.

Formulation, Optimization and Evaluation of Cytarabine-Loaded Iron Oxide Nanoparticles: From In Vitro to In Vivo Evaluation of Anticancer Activity.

Innovative drug delivery systems based on iron oxide nanoparticles (INPs) has generated a lot of interest worldwide and have prime biomedical benefits in anticancer therapy. There are still issues reported regarding the stability, absorption, and toxicity of iron oxide nanoparticles (INPs) when administered due to its rapid surface oxidation and agglomeration with blood proteins. To solve this problem, we have synthesized trehalose-coated stabilized iron oxide nanoparticles (TINPs) by a co-precipitation technique. The surface coating of INPs with trehalose helps to improve the stability, prevents protein binding, and increase absorption uptake inside the body. Developed TINPs was then loaded with anticancer drug cytarabine by chemical crosslinking encapsulation method using suitable solvent. Engineered cytarabine-loaded trehalose-coated stabilized iron oxide nanoparticles (CY-TINPs) were optimized for particle size, zeta potential (-13.03 mV), and solid-state characterization such as differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), and transmission electron microscope (TEM) studies. The particle size of 50 nm was achieved for developed CY-TINPs. The developed CY-TINPs was further evaluated for in vitro cell line investigations which confirmed potential cytotoxic activity. Developed CY-TINPs show remarkable enhancement in in vivo pharmacokinetic parameters Cmax as 425.26 ± 2.11 and AUC0-72 as 11,546.64 ± 139.82 as compared to pure drug. Compared to traditional drug delivery, the CY-TINPs formulation can effectively delay release, improve bioavailability, and boost cytotoxic activity against tumors.

Extended release delivery system of metoprolol succinate using hot-melt extrusion: effect of release modifier on methacrylic acid copolymer.

The current study reports on the manufacturing of extended release dosage forms of metoprolol succinate via hot-melt extrusion (HME) technology. Either Eudragit®S100 and Eudragit®L100 alone or in combination with release modifying agent Polyox™ WSR 303 and Eudragit®L100-55 were processed to obtain complete and faster release. Metoprolol succinate with similar solubility parameters to polymer was dispersed in polymer matrix and was characterized by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM). Stability of drug after extrusion was confirmed by thermogravimetric analysis and high-performance liquid chromatography. Physical characterization method exhibited that the drug was homogeneously dispersed in non-crystalline state in Eudragit®L100-55-based formulations whereas in semi-crystalline state in Polyox™ WSR 303. The drug release percentage was below 3 and 40% in 0.1 N HCL with Eudragit®L100-55- and Polyox™ WSR 303-containing formulations, respectively, and exhibited pH-dependent dissolution properties. The drug-release mechanism was anomalous with Polyox™ WSR 303 formulations whereas diffusion through pore formation was obtained with Eudragit®L100-55. Both Eudragit®L100-55 and Polyox™ WSR 303 changed the release mechanism and kinetics of drug release from thermally processed dosage forms. The optimized stable formulation is similar to the marketed formulation with F2 value of 72.36. Thus, it can be concluded that HME was exploited as an effective process for the preparation of controlled release matrix system based on pH-dependent polymer matrices Eudragit®S100 and Eudragit®L100.

Solid crystal suspension of Efavirenz using hot melt extrusion: Exploring the role of crystalline polyols in improving solubility and dissolution rate.

Poor aqueous solubility of drugs has emerged as a major issue for pharmaceutical scientists from many decades. The current study explores the manufacture and development of a thermodynamically stabilized solid crystal suspension (SCS) of poorly water soluble drug efavirenz via hot melt extrusion. Efavirenz is a non-nucleoside reverse transcriptase inhibitor and belongs to BCS class II. The SCS was prepared using pearlitol and xylitol as a crystalline carrier. The drug-excipient blend was processed by hot melt extrusion with up to 50% (w/w) drug loading. Physico-chemical characterization of the SCS conducted via a scanning electron microscopy, differential scanning calorimetry and hot stage microscopy confirmed that SCS are in crystalline state. Similarly, X-ray powder diffraction analysis revealed highly crystalline existence of pure drug, crystalline carriers and developed SCS. The FTIR chemical imaging analysis of SCS formulations showed a homogeneous drug distribution within respective crystalline carriers while an advanced chemical analysis via atomic force microscopy and Raman analysis complemented the foregoing findings. The developed SCS1 formulation showed up to 81 fold increase in the solubility and 4.1 fold increase in the dissolution rate of the drug compared to that of the bulk substance. Surprisingly, the developed SCS formulation remained stable for a period of more than one year at accelerated conditions inferred from dissolution studies. It can be concluded that the SCS approach can be used as an alternative contemporary technique to enhance the dissolution rates of many other poorly water-soluble drugs by means of thermal HME processing.

Advanced surface chemical analysis of continuously manufactured drug loaded composite pellets.

The aim of the present study was to develop and characterise polymeric composite pellets by means of continuous melt extrusion techniques. Powder blends of a steroid hormone (SH) as a model drug and either ethyl cellulose (EC N10 and EC P7 grades) or hydroxypropyl methylcellulose (HPMC AS grade) as polymeric carrier were extruded using a Pharma 11mm twin screw extruder in a continuous mode of operation to manufacture extruded composite pellets of 1mm length. Molecular modelling study using commercial Gaussian 09 software outlined a possible drug-polymer interaction in the molecular level to develop solid dispersions of the drug in the pellets. Solid-state analysis conducted via a differential scanning calorimetry (DSC), hot stage microscopy (HSM) and X-ray powder diffraction (XRPD) analyses revealed the amorphous state of the drug in the polymer matrices. Surface analysis using SEM/energy dispersive X-ray (EDX) of the produced pellets arguably showed a homogenous distribution of the C and O atoms in the pellet matrices. Moreover, advanced chemical surface analysis conducted via atomic force microscopy (AFM) showed a homogenous phase system having the drug molecule dispersed onto the amorphous matrices while Raman mapping confirmed the homogenous single-phase drug distribution in the manufactured composite pellets. Such composite pellets are expected to deliver multidisciplinary applications in drug delivery and medical sciences by e.g. modifying drug solubility/dissolutions or stabilizing the unstable drug (e.g. hormone, protein) in the composite network.

Biodegradable Porous Starch Spheres as a Novel Carrier for Enhancement of Dissolution Rate and Oral Bioavailability of Itraconazole.

BACKGROUND: A biodegradable porous starch (BPS) was developed in order to improve dissolution and oral bioavailability of Itraconazole as a poorly water-soluble antifungal drug. METHOD: BPS was developed by converting native starch from hydrogel to alcogel by solvent exchange method. The developed BPS carrier was characterized by SEM and nitrogen adsorption/desorption analysis to understand surface morphology and porosity distribution respectively. Itraconazole (ITR) was loaded on BPS by adsorption mediated solvent evaporation method, which provides a hydrophilic matrix powder. This causes drug distribution within hydrophilic matrix of porous starch. RESULTS: Solid-state characterization of optimized batch (ITR/BPS-3) was performed using DSC, PXRD, FTIR, SEM and FTIR chemical imaging. In vitro dissolution and in vivo pharmacokinetic studies were performed to evaluate therapeutic potential of ITR/BPS-3 system. In vitro studies of ITR: BPS-3 system revealed a burst effect in drug release (93%) compared to marketed product, which showed 90% drug release at the end of 60 min compared to 84% of marketed. Moreover, ITR/BPS-3 system showed improved oral bioavailability up to 3.93 fold and marketed product shows 3.12 fold compared to ITR. CONCLUSION: This effect is due to high surface area, improved wettability and reduced crystallinity of ITR due to its adsorption into BPS. A successful methodology was reported to prepare BPS from raw starch.

Hot melt extrusion based solid solution approach: Exploring polymer comparison, physicochemical characterization and in-vivo evaluation.

The objective of this study was to develop solid solution (SSL) using hot-melt extrusion as a continuous manufacturing method. Powder blends of artesunate (ARS) a water insoluble drug with either Soluplus (SOL) or Kollidon VA64 (VA64) and additives in the form of surfactants or plasticizers were extruded to manufacture extrudes. The incorporation of surfactant or plasticizers facilitates smooth extrusion processing of the drug-excipient blend which directly reduced the residence time to form extrudes and works as parameter to control flow of the drug-excipients melt inside the extruder barrel. Differential scanning calorimetry (DSC) and X-ray diffraction (TXRD) analysis revealed the existence of the drug within the extrudes in amorphous state. Scanning electron microscopy (SEM), Raman spectroscopy (RS), Raman imaging (RI) and Atomic force microscopy (AFM) analytical characterization were carry out on the SSL formulations showed a homogeneous drug distribution within the extrudes. (2)D NMR and (1)H NMR studies were undertaken to reveal the possible drug-excipient interactions. The SSL produced via continuous HME processing showed significantly faster release of ARS compared to the pure drug substance. It is observed that F1 SSL (soluplus based) have 66.44 times higher AUC(0-72) and 16.60 times higher Cmax than pure ARS. Also K1 SSL (Kollidon VA64 based) have 62.20 times higher AUC(0-72) and 13.40 times higher Cmax than pure ARS.

Development of hot melt co-formulated antimalarial solid dispersion system in fixed dose form (ARLUMELT): Evaluating amorphous state and in vivo performance.

The aim of this study was to investigate the industrial feasibility of developing a co-formulated solid dispersion (SD) containing two antimalarial drugs artemether (ARTM) and lumefantrine (LUMF). Soluplus(®) (polyethyleneglycol-polyvinyl caprolactam-polyvinyl acetate grafted copolymer) was used as primary carrier matrices via hot-melt extrusion processing to improve solubility profile and the oral bioavailability of the combination. Based on the preliminary screening, the optimized quantities of PEG 400, Lutrol F127 and Lutrol F68 were incorporated as surfactant with soluplus in different ratios to improve extrudability, increase wettability and the melt viscosity of the HME process. Soluplus(®) was proved to successfully stabilize both the drugs inside its polymeric network during extrusion via forming a stable solid dispersion. Physicochemical properties of the APIs and the SDs characterized by thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), MDSC, FTIR spectroscopy and X-ray diffractometry (XRD) revealed the amorphous existence of the drug in all SDs developed. Molecular level morphology of solid dispersion characterized by using advanced physicochemical characterization techniques such as Raman spectroscopy, atomic force microscopy (AFM) and 2D NMR showed the transformation of the crystalline drugs to its stable amorphous state. All manufactured SDs retained their amorphicity even after a stability study conducted in accelerated condition over 6 months. The solubility and in vitro dissolution performance of both drugs in SD formulations was improved significantly when compared with pure drugs and marketed product while the in vivo studies revealed the same.The pharmacokinetic studies in rats revealed that the SD (AL1) shows a 44.12-65.24 folds increase in the AUC(0-72) and 42.87-172.61 folds increase in Cmax compared to that of pure drugs and a better bioavailability than that of commercial product.

Hot melt extruded amorphous solid dispersion of posaconazole with improved bioavailability: investigating drug-polymer miscibility with advanced characterisation.

Invasive antifungal infections are reasons for morbidity and mortality in immunogenic patients worldwide. Posaconazole is a most promising antifungal agent against all types of invasive infections with high % of cure rate. The marketed suspension formulation has low bioavailability and is needed to be taken with food. In this paper, PCZ hot melt extruded amorphous solid dispersion (SD) with immediate release and improved bioavailability was prepared using Soluplus (Sol) as primary carrier for solubilization. Surfactants such as PEG 400, Lutrol F27, Lutrol F68, and TPGS are also used in combination with Soluplus to improve the physicochemical performance of the formulation when it comes in contact with GI (gastrointestinal) fluid. Drug-polymer miscibility of SD was investigated using advanced techniques. In the in vivo study, the AUC(0-72) and C(max) of PCZ/Soluplus were 11.5 and 11.74 time higher than those of pure PCZ. The formulation of the extrudate SD had an AUC(0-72) and C(max) higher than those with the commercial capsule (Noxafil). Molecular dynamic (MD) simulation studies were carried out using in silico molecular modelling to understand the drug-polymer intermolecular behaviour. The results of this research ensure enhanced dissolution and bioavailability of the solid dispersion of PCZ prepared by HME compared with the PCZ suspension.

Porous starch: a novel carrier for solubility enhancement of carbamazepine.

To circumvent the solubility-related issues associated with Biopharmaceutics Classification System class II drugs, a novel porous carrier has been developed. In the present study, a process for preparation of porous starch (PS) is demonstrated. The process briefly comprises of translucent gel preparation followed by solvent replacement, drying, and sizing. Carbamazepine (CBZ) was used as a drug candidate to exhibit solubility enhancement potential of PS. PS and CBZ-loaded PS (CBZ-PS) systems were characterized with respect to IR, DSC, XRD, SEM, and dissolution kinetic studies. PS-CBZ was found to follow a Fickian behavior during dissolution. In vivo studies conducted in mice displayed a superior performance of CBZ-PS as compared to neat CBZ.

Fabrication of cyclodextrin-templated mesoporous silica for improved dissolution of carbamazepine.

In the present paper, preparation of mesoporous silica using hydroxy propyl-ß-cyclodextrin as a template and its use in solubility enhancement of carbamazepine (CBZ) is reported. The produced mesoporous silica (MS) displayed a large surface area 480.37 m(2)/g and pore volume 0.8041 cm(3)/g. CBZ was loaded on MS and then compressed into a tablet. Dissolution kinetics studies revealed rapid release profiles in comparison to neat crystalline CBZ. Solid-state characterization was done using IR, DSC, PXRD, SEM and TEM, and nitrogen sorption studies. CBZ was found to be in non-crystalline state due to geometric confinement in the nanopore.

Artemether-Soluplus Hot-Melt Extrudate Solid Dispersion Systems for Solubility and Dissolution Rate Enhancement with Amorphous State Characteristics.

This work studied artemether (ARTM) solid dispersion (SD) formulation using mixture of polymer excipient Soluplus, PEG 400, Lutrol F127, and Lutrol F68 melts at temperatures lower than the melting point of ARTM using a laboratory-size, single-screw rotating batch extruder. The effects of three surfactants PEG 400, Lutrol F127, and Lutrol F68 and parameters like mixing temperature, screw rotating speed, and residence time were systematically studied. SEM, XRD, and FT-IR were employed to investigate the evolution of ARTM's dissolution into the molten excipient. Differential scanning calorimetry (DSC) was used to quantitatively study the melting enthalpy evolution of the drug. The results showed that the dissolution rate increased with increasing the ratio of polymer and surfactant to that of drug. It was concluded that the dissolution of the drug in the polymer melt is a convective diffusion process and that laminar distributive mixing can significantly enhance the dissolution rate. The aqueous solubility and dissolution rate of prepared solid dispersion were significantly enhanced. In vitro antimalarial studies revealed marked improvement in IC50 values. Thus hot-melt extrusion (HME) is a promising technology for improving solubility and dissolution profile of ARTM.