Drop-cast gold nanoparticles are not always electrocatalytically active for the borohydride oxidation reaction.

The next-generation of energy devices rely on advanced catalytic materials, especially electrocatalytic nanoparticles (NPs), to achieve the performance and cost required to reshape the energy landscape towards a more sustainable and cleaner future. It has become imperative to maximize the performance of the catalyst, both through improvement of the intrinsic activity of the NP, and by ensuring all particles are performing at the level of their capability. This requires not just a structure-function understanding of the catalytic material, but also an understanding of how the catalyst performance is impacted by its environment (substrate, ligand, etc.). The intrinsic activity and environment of catalytic particles on a support may differ wildly by particle, thus it is essential to build this understanding from a single-entity perspective. To achieve this herein, scanning electrochemical cell microscopy (SECCM) has been used, which is a droplet-based scanning probe technique which can encapsulate single NPs, and apply a voltage to the nanoparticle whilst measuring its resulting current. Using SECCM, single AuNPs have been encapsulated, and their activity for the borohydride oxidation reaction (BOR) is measured. A total of 268 BOR-active locations were probed (178 single particles) and a series of statistical analyses were performed in order to make the following discoveries: (1) a certain percentage of AuNPs display no BOR activity in the SECCM experiment (67.4% of single NPs), (2) visibly-similar particles display wildly varied BOR activities which cannot be explained by particle size, (3) the impact of cluster size (#NP at a single location) on a selection of diagnostic electrochemical parameters can be easily probed with SECCM, (4) exploratory statistical correlation between these parameters can be meaningfully performed with SECCM, and (5) outlying "abnormal" NP responses can be probed on a particle-by-particle basis. Each one of these findings is its own worthwhile study, yet this has been achieved with a single SECCM scan. It is hoped that this research will spur electrochemists and materials scientists to delve deeper into their substantial datasets in order to enhance the structure-function understanding, to bring about the next generation of high-performance electrocatalysts.

Introduction to fundamental processes in optical nanomaterials.

An introduction to the joint Nanoscale and Chemical Communications (ChemComm) themed collection focused on fundamental processes in optical nanomaterials that features a series of articles describing the properties of this versatile class of materials while highlighting some of their potential applications.

Tuning the Photoluminescence Anisotropy of Semiconductor Nanocrystals.

Semiconductor nanocrystals are promising optoelectronic materials. Understanding their anisotropic photoluminescence is fundamental for developing quantum-dot-based devices such as light-emitting diodes, solar cells, and polarized single-photon sources. In this study, we experimentally and theoretically investigate the photoluminescence anisotropy of CdSe semiconductor nanocrystals with various shapes, including plates, rods, and spheres, with either wurtzite or zincblende structures. We use defocused wide-field microscopy to visualize the emission dipole orientation and find that spheres, rods, and plates exhibit the optical properties of 2D, 1D, and 2D emission dipoles, respectively. We rationalize the seemingly counterintuitive observation that despite having similar aspect ratios (width/length), rods and long nanoplatelets exhibit different defocused emission patterns by considering valence band structures calculated using multiband effective mass theory and the dielectric effect. The principles are extended to provide general relationships that can be used to tune the emission dipole orientation for different materials, crystalline structures, and shapes.

Live-Cell SOFI Correlation with SMLM and AFM Imaging.

Standard optical imaging is diffraction-limited and lacks the resolving power to visualize many of the organelles and proteins found within the cell. The advent of super-resolution techniques overcame this barrier, enabling observation of subcellular structures down to tens of nanometers in size; however these techniques require or are typically applied to fixed samples. This raises the question of how well a fixed-cell image represents the system prior to fixation. Here we present the addition of live-cell Super-Resolution Optical Fluctuation Imaging (SOFI) to a previously reported correlative process using Single Molecule Localization Microscopy (SMLM) and Atomic Force Microscopy (AFM). SOFI was used with fluorescent proteins and low laser power to observe cellular ultrastructure in live COS-7 cells. SOFI-SMLM-AFM of microtubules showed minimal changes to the microtubule network in the 20 min between live-cell SOFI and fixation. Microtubule diameters were also analyzed through all microscopies; SOFI found diameters of 249 ± 68 nm and SMLM was 71 ± 33 nm. AFM height measurements found microtubules to protrude 26 ± 13 nm above the surrounding cellular material. The correlation of SMLM and AFM was extended to two-color SMLM to image both microtubules and actin. Two target SOFI was performed with various fluorescent protein combinations. rsGreen1-rsKAME, rsGreen1-Dronpa, and ffDronpaF-rsKAME fluorescent protein combinations were determined to be suitable for two target SOFI imaging. This correlative application of super-resolution live-cell and fixed-cell imaging revealed minimal artifacts created for the imaged target structures through the sample preparation procedure and emphasizes the power of correlative microscopy.

Modulation of Cathodoluminescence by Surface Plasmons in Silver Nanowires.

The waveguide modes in chemically-grown silver nanowires on silicon nitride substrates are observed using spectrally- and spatially-resolved cathodoluminescence (CL) excited by high-energy electrons in a scanning electron microscope. The presence of a long-range, travelling surface plasmon mode modulates the coupling efficiency of the incident electron energy into the nanowires, which is observed as oscillations in the measured CL with the point of excitation by the focused electron beam. The experimental data are modeled using the theory of surface plasmon polariton modes in cylindrical metal waveguides, enabling the complex mode wavenumbers and excitation strength of the long-range surface plasmon mode to be extracted. The experiments yield insight into the energy transfer mechanisms between fast electrons and coherent oscillations in surface charge density in metal nanowires and the relative amplitudes of the radiative processes excited in the wire by the electron.

Macroporous perovskite nanocrystal composites for ultrasensitive copper ion detection.

Accumulation of heavy metal ions, including copper ions (Cu2+), presents a serious threat to human health and to the environment. A substantial amount of research has focused on detecting such species in aqueous solutions. However, progress towards ultrasensitive and easy-to-use sensors for non-aqueous solutions is still limited. Here, we focus on the detection of copper species in hexane, realising ultra-sensitive detection through a fluorescence-based approach. To achieve this, a novel macroporous composite material has been developed featuring luminescent CsPbBr3 nanocrystals (NCs) chemically adhered to a polymerized high internal phase emulsion (polyHIPE) substrate through surface thiol groups. Due to this thiol functionality, sub-monolayer NC formation is realised, which also renders outstanding stability of the composite in the ambient environment. Copper detection is achieved through a direct solution based immersion of the CsPbBr3-(SH)polyHIPE composite, which results in concentration-dependent quenching of the NC photoluminescence. This newly developed sensor has a limit of detection (LOD) for copper as low as 1 × 10-16 M, and a wide operating window spanning 10-2 to 10-16 M. Moreover, the composite exhibits excellent selectivity among different transition metals.

Optimising correlative super resolution and atomic force microscopies for investigating the cellular cytoskeleton.

Correlative imaging methods can provide greater information for investigations of cellular ultra-structure, with separate analysis methods complementing each other's strengths and covering for deficiencies. Here we present a method for correlative applications of super resolution and atomic force microscopies, optimising the sample preparation for correlative imaging of the cellular cytoskeleton in COS-7 cells. This optimisation determined the order of permeabilisation and fixation, the concentration of Triton X-100 surfactant used and time required for sufficient removal of the cellular membrane while maintaining the microtubule network. Correlative SMLM/AFM imaging revealed the different information that can be obtained through each microscopy. The widths of microtubules and microtubule clusters were determined from both AFM height measurements and Gaussian fitting of SMLM intensity cross sections, these were then compared to determine the orientation of microtubules within larger microtubule bundles. The ordering of microtubules at intersections was determined from the AFM height profiles as each microtubule crosses the other. The combination of both microtubule diameter measurements enabled greater information on their structure to be found than either measurement could individually.

Quasiperiodic light.

Quasiperiodicity is a form of spatial order that has been observed in quasicrystalline matter but not light. We construct a quasicrystalline surface out of a light emitting diode. Using a nanoscale waveguide as a microscope (NSOM), we directly image the light field at the surface of the diode. Here we show, using reciprocal space representations of the images, that the light field is quasiperiodic. We explain the structure of the light field with wave superposition. Periodic ordering is limited to at most six-fold symmetry. The light field exhibits 12-fold quasisymmetry, showing order while disproving periodicity. This demonstrates that a new class, consisting of projections from hyperspace, exists in the taxonomy of light ordering.

Chemical Fingerprinting of Polymers Using Electron Energy-Loss Spectroscopy.

Electron energy-loss spectroscopy (EELS) is becoming an important tool in the characterization of polymeric materials. The sensitivity of EELS to changes in the chemical structure of polymeric materials dictates its applicability. In particular, it is important for compositional analysis to have reference spectra of pure components. Here, we report the spectra of the carbon K-edge of six polymers (polyethylene, polypropylene, polybutylene terephthalate, and polylactic acid) including copolymers (styrene acrylonitrile and acrylonitrile butadiene styrene), to be used as reference spectra for future EELS studies of polymers. We have successfully decomposed the carbon K-edge of each of the polymers and assigned the observed peaks to bonding transitions. The spectra have been acquired in standard experimental conditions, and electron beam damage has been taken into account during establishment of spectral-structural relationships. We found that the more commonly available low-energy resolution spectrometers are adequate to chemically fingerprint linear saturated hydrocarbons such as PE, PP, and PLA. We have thus moved a step closer toward creating an atlas of polymer EELS spectra, which can be subsequently used for chemical bond mapping of polymeric materials with nanoscale spatial resolution.

Optimal quantum dot size for photovoltaics with fusion.

Light fusion increases the efficiency of solar cells by converting photons with lower energy than the bandgap into higher energy photons. The solar cell converts the product photons to current. We use Monte Carlo simulation to predict that lead sulfide (PbS) quantum dot sensitizers will enable fusion with a figure of merit on the mA cm-2 scale, exceeding current records, while enabling silicon cell compatibility. Performance is highly sensitive to quantum dot size, on the order of mA cm-2 nm-1.

Facile purification of CsPbX3 (X = Cl-, Br-, I-) perovskite nanocrystals.

CsPbI3 perovskite nanocrystals are a promising optoelectronic material when stabilized in their cubic phase. While ongoing efforts have addressed this structural challenge through a variety of meta-stabilization approaches, the postsynthesis purification of these nanocrystal dispersions has remained a challenge. In this article, we undertake a detailed investigation into the chemical, optical, and structural changes that arise during purification of CsPbI3 nanocrystals. It is found that nanocrystal degradation can only be avoided through the judicious control of additives within each purification cycle. Under optimized additive-to-nanocrystal ratios, multiple purification cycles can be readily achieved, while retaining the quality and phase stability of the CsPbI3. This facile purification protocol ensures the preparation of high purity and high quality CsPbI3 nanocrystal inks that are suitable for better characterization or integration in optoelectronic devices. The approach has been generalized for CsPbX3 (X = Cl-, Br-, and I-).

Plasmonic isomers via DNA-based self-assembly of gold nanoparticles.

Developments in DNA nanotechnology offer control of the self-assembly of materials into discrete nanostructures. Within this paradigm, pre-assembled DNA origami with hundreds of DNA strands allows for precise and programmable spatial positioning of functionalised nanoparticles. We propose an alternative approach to construct multiple, structurally different, nanoparticle assemblies from just a few complementary nanoparticle-functionalised DNA strands. The approach exploits local minima in the potential energy landscape of hybridised nanoparticle-DNA structures by employing kinetic control of the assembly. Using a four-strand DNA template, we synthesise five different 3D gold nanoparticle (plasmonic) tetrameric isomers, akin to molecular structural isomers. The number of different structures formed using this approach for a set of DNA strands represents a combinatorial library, which we summarise in a hybridisation pathway tree and use to achieve deposition of tetrahedral assemblies onto substrates in high yield. The ability to program nanoparticle self-assembly pathways gives unprecedented access to unique plasmonic nanostructures.

Mesoscale surface plasmons: modelling and imaging using near-field scanning optical microscopy.

Meso-scale plasmons are supported by structures with dimensions on the order of tens of plasmon wavelengths. Metal structures at this length-scale are promising for the design and engineering of structures to direct the flow of optical energy and generate high intensity, localized electric fields. The near-field optical properties of mesoscale crystalline gold plates were examined using near-field scanning optical microscopy with a focus on the effects of modifying morphology and excitation conditions. Excitation of surface plasmon polaritons (SPPs) at plate edges and their subsequent propagation and interference as radial waves across the surface results in nodes of enhancement of the near-field on the plate surface at specific positions within the plate. The spatial position of the near-field enhancement may be directed by controlling either, or both, the boundary conditions (plate shape) and polarization of the excitation light.

The evolution of size, shape, and surface morphology of gold nanorods.

We investigate the transformation of single crystal gold nanorod surface morphology over extended growth times. After initial rapid anisotropic growth and disappearance of {111} bridging facets, the aspect ratios converge across AgNO3 concentrations. The surface morphology transitions from faceted to curved. These observations imply the final aspect ratio has little dependence on the AgNO3 concentration, consistent with primary control of the AgNO3 over aspect ratio occurring at the symmetry breaking point.

p-Carborane Conjugation in Radical Anions of Cage-Cage and Cage-Phenyl Compounds.

Optical electron transfer (intervalence) transitions in radical anions of p-carborane oligomers attest to delocalization of electrons between two p-carboranes cages or a p-carborane and a phenyl ring. Oligomers of the 12 vertex p-carborane (C2B10H12) cage, [12], with up to 3 cages were synthesized, as well as p-carboranes with one or two trimethylsilylphenyl groups, [6], attached to the carbon termini. Pulse radiolysis in tetrahydrofuran produced radical anions, determined redox potentials by equilibria and measured their absorption spectra. Density functional theory computations provided critical insight into the optical electron transfer bands and electron delocalization. One case, [6-12-6], showed both Robin-Day class II and III transitions. The class III transition resulted from a fully delocalized excess electron across both benzene rings and the central p-carborane, with an electronic coupling Hab = 0.46 eV between the cage and either benzene. This unprecedented finding shows that p-carborane bridges are not simply electron withdrawing insulators. In other cases with more than ∼1/2 of the excess electron localized on a [12], large cage distortions were triggered, producing a partially open cage with a nido-like structure. This resulted in class II transitions with similar Hab but massive reorganization energies. The computations also predicted delocalization in radical cations, but complexities in cation formation allowed only tentative experimental support of the predictions. The results with anions provide clear evidence for carborane conjugation that might be exploited in molecular wire materials, which are classically composed of all π-conjugated molecules.

A Mechanism for Symmetry Breaking and Shape Control in Single-Crystal Gold Nanorods.

The phenomenon of symmetry breaking-in which the order of symmetry of a system is reduced despite manifest higher-order symmetry in the underlying fundamental laws-is pervasive throughout science and nature, playing a critical role in fields ranging from particle physics and quantum theory to cosmology and general relativity. For the growth of crystals, symmetry breaking is the crucial step required to generate a macroscopic shape that has fewer symmetry elements than the unit cell and/or seed crystal from which it grew. Advances in colloid synthesis have enabled a wide variety of nanocrystal morphologies to be achieved, albeit empirically. Of the various nanoparticle morphologies synthesized, gold nanorods have perhaps been the most intensely studied, thanks largely to their unique morphology-dependent optical properties and exciting application potential. However, despite intense research efforts, an understanding of the mechanism by which a single crystal breaks symmetry and grows anisotropically has remained elusive, with many reports presenting seemingly conflicting data and theories. A fundamental understanding of the symmetry breaking process is needed to provide a rational framework upon which future synthetic approaches can be built. Inspired by recent experimental results and drawing upon the wider literature, we present a mechanism for gold nanorod growth from the moments prior to symmetry breaking to the final product. In particular, we describe the steps by which a cuboctahedral seed particle breaks symmetry and undergoes anisotropic growth to form a nanorod. With an emphasis on the evolving crystal structure, we highlight the key geometrical and chemical drivers behind the symmetry breaking process and factors that govern the formation and growth of nanorods, including control over the crystal width, length, and surface faceting. We propose that symmetry breaking is induced by an initial formation of a new surface structure that is stabilized by the deposition of silver, thus preserving this facet in the embryonic nanorod. These new surfaces initially form stochastically as truncations that remove high-energy edge atoms at the intersection of existing {111} facets and represent the beginnings of a {011}-type surface. Crucially, the finely tuned [HAuCl4]:[AgNO3] ratio and reduction potential of the system mean that silver deposition can occur on the more atomically open surface but not on the pre-existing lower-index facets. The stabilized surfaces develop into side facets of the nascent nanorod, while the largely unpassivated {111} facets are the predominant site of Au atom deposition. Growth in the width direction is tightly controlled by a self-sustaining cycle of galvanic replacement and silver deposition. It is the [HAuCl4]:[AgNO3] ratio that directly determines the particle size at which the more open atomic surfaces can be stabilized by silver and the rate of growth in the width direction following symmetry breaking, thus explaining the known aspect ratio control with Ag ion concentration. We describe the evolving surface faceting of the nanorod and the emergence of higher-index facets. Collectively, these observations allow us to identify facet-size and edge-atom effects as a simple fundamental driver of symmetry breaking and the subsequent development of new surfaces in the presence of adsorbates.

Topologically Enclosed Aluminum Voids as Plasmonic Nanostructures.

Recent advances in the ability to synthesize metallic nanoparticles with tailored geometries have led to a revolution in the field of plasmonics. However, studies of the important complementary system, an inverted nanostructure, have so far been limited to two-dimensional sphere-segment voids or holes. Here we reveal the localized surface plasmon resonances (LSPRs) of nanovoids that are topologically enclosed in three-dimensions: an "anti-nanoparticle". We combine this topology with the favorable plasmonic properties of aluminum to observe strongly localized field enhancements with LSPR energies in the extreme UV range, well beyond those accessible with noble metals or yet achieved with aluminum. We demonstrate the resonance tunability by tailoring the shape and size of the nanovoids, which are truncated octahedra in the 10-20 nm range. This system is pristine: the nanovoid cavity is free from any oxide or supporting substrate that would affect the LSPRs. We exploit this to infer LSPRs of pure, sub-20-nm Al nanoparticles, which have yet to be synthesized. Access to this extreme UV range will allow applications in LSPR-enhanced UV photoemission spectroscopy and photoionization.

Single Gold Nanorod Charge Modulation in an Ion Gel Device.

A reliable and reproducible method to rapidly charge single gold nanocrystals in a solid-state device is reported. Gold nanorods (Au NRs) were integrated into an ion gel capacitor, enabling them to be charged in a transparent and highly capacitive device, ideal for optical transmission. Changes in the electron concentration of a single Au NR were observed with dark-field imaging spectroscopy via localized surface plasmon resonance (LSPR) shifts in the scattering spectrum. A time-resolved, laser-illuminated, dark-field system was developed to enable direct measurement of single particle charging rates with time resolution below one millisecond. The added sensitivity of this new approach has enabled the optical detection of fewer than 110 electrons on a single Au NR. Single wavelength resonance shifts provide a much faster, more sensitive method for all surface plasmon-based sensing applications.

Electron Energy Loss Spectroscopy Investigation into Symmetry in Gold Trimer and Tetramer Plasmonic Nanoparticle Structures.

We present a combined scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS) investigation into the mode symmetries of plasmonic nanoparticle trimer and tetramer structures. We obtain nanometer-resolved energy loss spectra for both trimer and tetramer structures and compare these to boundary element method simulations. We show that EELS, in conjunction with eigenmode simulations, offers a complete characterization of the individual superstructures, and we trace the evolution of both optically dark and bright modes and identify multipolar mode contributions. We then apply this technique to tetramer structures that exhibit an expanded range of mode symmetries for two-dimensional and three-dimensional self-assembled geometries. These findings provide a comprehensive experimental account of the available photonic states in self-assembled nanoparticle clusters.

Mapping bound plasmon propagation on a nanoscale stripe waveguide using quantum dots: influence of spacer layer thickness.

In this paper we image the highly confined long range plasmons of a nanoscale metal stripe waveguide using quantum emitters. Plasmons were excited using a highly focused 633 nm laser beam and a specially designed grating structure to provide stronger incoupling to the desired mode. A homogeneous thin layer of quantum dots was used to image the near field intensity of the propagating plasmons on the waveguide. We observed that the photoluminescence is quenched when the QD to metal surface distance is less than 10 nm. The optimised spacer layer thickness for the stripe waveguides was found to be around 20 nm. Authors believe that the findings of this paper prove beneficial for the development of plasmonic devices utilising stripe waveguides.