Formulation optimization of sterilized xanthones-loaded nanoemulgels and evaluation of their wound healing activities.

Xanthones (XTs) are bioactive compounds found in mangosteen trees (Garcinia mangostana Linn.). They are used as an active ingredient in various health products. However, there is a lack of data of their application in wound healing. In particular, the topical products of XTs for wound healing; they should be sterilized to minimize the risks of wound infection from contaminated microorganisms. This study thus aimed to optimize the formulation of sterilized XTs-loaded nanoemulgel (XTs-NE-G) and to investigate their wound healing activities. The XTs-NE-Gs were prepared by mixing various gels containing sodium alginate (Alg) and Pluronic F127 (F127) into a XTs-nanoemulsion (NE) concentrate according to the face-centered central composite design. The results showed that the optimized XTs-NE-G was A5-F3 containing 5% w/w Alg and 3% w/w F127. It enhanced the proliferation-, migration rates of skin fibroblasts (HFF-1 cells) with an optimal viscosity. After blending the XTs-NE concentrate and the gel that was previously sterilized by a membrane filtration and an autoclaving technique, respectively, the sterilized A5-F3 was obtained. The sterilized A5-F3 still had effective bioactivities towards the HFF-1 cells. It promoted re-epithelialization, collagen deposition and inflammation suppression in the mice' wounds. It could thus be accepted for further investigation in clinical studies.

Effects of Calcium Carbonate Microcapsules and Nanohydroxyapatite on Properties of Thermosensitive Chitosan/Collagen Hydrogels.

Thermosensitive chitosan/collagen hydrogels are osteoconductive and injectable materials. In this study, we aimed to improve these properties by adjusting the ratio of nanohydroxyapatite particles to calcium carbonate microcapsules in a ß-glycerophosphate-crosslinked chitosan/collagen hydrogel. Two hydrogel systems with 2% and 5% nanohydroxyapatite particles were studied, each of which had varying microcapsule content (i.e., 0%, 1%, 2%, and 5%). Quercetin-incorporated calcium carbonate microcapsules were prepared. Calcium carbonate microcapsules and nanohydroxyapatite particles were then added to the hydrogel according to the composition of the studied system. The properties of the hydrogels, including cytotoxicity and biocompatibility, were investigated in mice. The calcium carbonate microcapsules were 2-6 µm in size, spherical, with rough and nanoporous surfaces, and thus exhibited a burst release of impregnated quercetin. The 5% nanohydroxyapatite system is a solid particulate gel that supports homogeneous distribution of microcapsules in the three-dimensional matrix of the hydrogels. Calcium carbonate microcapsules increased the mechanical and physical strength, viscoelasticity, and physical stability of the nanohydroxyapatite hydrogels while decreasing their porosity, swelling, and degradation rates. The calcium carbonate microcapsules-nanohydroxyapatite hydrogels were noncytotoxic and biocompatible. The properties of the hydrogel can be tailored by adjusting the ratio of calcium carbonate microcapsules to the nanohydroxyapatite particles. The 1% calcium carbonate microcapsules containing 5% nanohydroxyapatite particle-chitosan/collagen hydrogel exhibited mechanical and physical strength, permeability, and prolonged release profiles of quercetin, which were superior to those of the other studied systems and were optimal for promoting bone regeneration and delivering natural flavonoids.

Roles of viscosity, applied load and surface wettability on the lubrication behaviour of model liquid/semi-solid foods: Measurements with a bespoke tribo-cell fixture and rotational rheometer.

Thin film sliding and friction phenomena of food bolus confined between tongue-palate surfaces during oral processing can be explored using tribological measurements. However, these measurements are still limited within the food industry due to the requirement of expensive commercial instruments which are not commonly used in the food industry. This work has designed and manufactured a modular "tribological cell" (tribo-cell) that can simulate lubricated soft-hard contact interfaces and can be mounted on a rotational rheometer to perform tribological measurements. The tribo-cell was validated by performing tribological measurements using a range of corn syrup solutions as model liquid foods. It was shown that the Stribeck curve describing the change in friction behaviour with entrainment speed or with the product of entrainment speed and liquid viscosity could be obtained. Since tribology deals with surface property, the cell was then used in the further studies to demonstrate the effects of applied normal load and surface wetting on the tribological response of lubricated hard-soft contact of the designed fixture. These parameters were shown to have a marked influence on in the boundary and mixed-lubrication regimes. The designed tribo-cell was also used to illustrate the impact of fat content on the lubrication properties of commercial liquid and semi-solid foods with different fat contents, thus, pointing out to the importance of tribology as a vital tool for product formulation designs in food and beverage industry.

Optimization of Production Parameters for Andrographolide-Loaded Nanoemulsion Preparation by Microfluidization and Evaluations of Its Bioactivities in Skin Cancer Cells and UVB Radiation-Exposed Skin.

Andrographolide (AG) is an active compound isolated from Andrographis paniculata (Family Acanthaceae). Although it possesses beneficial bioactivities to the skin, there is insufficient information of its applications for treatment of skin disorders due to low water solubility leading to complications in product development. To overcome the problem, an AG-loaded nanoemulsion (AG-NE) was formulated and prepared using a microfluidization technique. This study aimed to investigate the effect of pressure and the number of homogenization cycles (factors) on droplet size, polydispersity index and zeta potential of AG-NE (responses) and to determine the effect of AG-NE on skin cancer cells and UVB irradiation-induced skin disorders in rats. Relationships between factors versus responses obtained from the face-centered central composite design were described by quadratic models. The optimum value of parameters for the production of optimized AG-NE (Op-AG-NE) were 20,000 psi of pressure and 5 homogenization cycles. Op-AG-NE showed promising cytotoxicity effects on the human malignant melanoma- (A375 cells) and non-melanoma cells (A-431 cells) via apoptosis induction with a high selectivity index and also inhibited intracellular tyrosinase activity in the A375 cells. Op-AG-NE could reduce melanin index and healed UVB irradiation exposed skin. Op-AG-NE thus had potential for treatment of skin cancers and skin disorders from exposure to UVB radiation.

Application of film-forming solution as a transdermal delivery system of piperine-rich herbal mixture extract for anti-inflammation.

Piperine-rich herbal mixture (PHM) used in this study is a traditional Thai medicine that contains 21 oriental herbs. It is called "Sahastara remedy" and is officially included in the Thai National List of Essential Medicine since A.D. 2011. PHM has been used orally to relieve muscle and bone pains. It contains Piper nigrum fruits as a major constituent and also Piper retrofractum fruits, PHM thus has anti-inflammatory activities that mostly come from the bioactivities of piperine consisting of these pepper fruits. Unfortunately, PHM usually causes gastrointestinal side effects. Consequently, a topical product containing an alcoholic extract of PHM (PHM-E), i.e., film-forming solution (FFS) was developed to overcome this drawback. The aims of this study were to investigate the anti-inflammatory activity of PHM-E, to evaluate physicochemical properties and the anti-inflammatory activity of FFS containing PHM-E (PHM-E FFS). Anti-inflammatory activities of PHM-E were investigated in the RAW 264.7 cells. Physicochemical properties, in vitro toxicities and anti-inflammatory activities of PHM-E FFS including its dry film (PHM-E film) were determined. PHM-E showed anti-inflammatory activities with dose dependent manners via inhibition of nitric oxide and prostaglandin E2 production by the RAW 264.7 cells and promotion of the cell phenotype polarization from M1 to M2. PHM-E FFS had low viscosity and exhibited the Newtonian behavior. It provided elastic PHM-E film with low tensile strength. The release profile of piperine from PHM-E film followed a zero-kinetic model. PHM-E FFS demonstrated compatibility with the skin cells, minimal ocular irritant when accidentally splashing into the eye and moderate-to-high potency for inhibition of inflammatory symptoms in the rats. PHM-E FFS thus had potential for use in the further clinical study to investigate its efficacy and safety in patients.

Formulation development and in vitro evaluation of transferrin-conjugated liposomes as a carrier of ganciclovir targeting the retina.

Ganciclovir (GCV) is an antiviral drug approved for treatment of cytomegalovirus (CMV) retinitis. It can be delivered to the eye via systemic administrations. However, local delivery of GCV that targets the retina is considered as an alternative to increase efficacy of the treatment and lessen side effects. Thus, this study aimed to develop formulations of transferrin (Tf)-conjugated liposomes containing GCV (Tf-GCV-LPs) for intravitreal injection and topical instillation. Tf-GCV-LPs were prepared by the reverse-phase evaporation technique and then conjugated to Tf. Their physicochemical properties were evaluated. The optimized formulation was selected and subjected to the cytotoxicity test, cellular uptake study in the human retinal pigment epithelial cells (the ARPE-19 cells) and antiviral activity evaluation. The results showed that physicochemical properties of Tf-GCV-LPs were affected by formulation compositions. The optimized Tf-GCV-LPs had a particle size lower than 100 nm with a negative value of zeta potential. They were safe for the ARPE-19 cells. These Tf-GCV-LPs were taken up by these cells via Tf receptors-mediated endocytosis and showed inhibitory activity on CMV in the infected cells. Therefore, the optimized Tf-GCV-LPs could be accepted as a promising drug delivery system for targeted GCV delivery to the retina in the treatment of CMV retinitis.

Physicochemical properties of alpha-mangostin loaded nanomeulsions prepared by ultrasonication technique.

HYPOTHESIS: Alpha-mangostin (AMG) is a natural compound possessing strong antibacterial activity. Because of its poor water solubility, the formulations of AMG usually require high concentrations of solubilizers leading limitation for using in some clinical applications. Thus, the novel formulation of topical nanoemulsion (NE) containing AMG (AMG-NE) with optimal content of the oil phase and surfactants was developed. EXPERIMENTS: AMG was extracted, purified and used as an active ingredient of AMG-NE. Blank NEs (NEs without AMG) with varying in contents of the oil phase and surfactants and AMG-NE were prepared by the ultrasonication technique. They were investigated their physicochemical properties including antibacterial activity against Staphyloccocus aureus and Propionibacterium acnes (which is recently renamed as Cutibacterium acnes). FINDINGS: Blank NEs and AMG-NE had droplet size in a range of nanometer and negative value of zeta potential. The droplet size, polydispersity index and zeta potential of blank NEs were affected by formulation compositions and sonication intensities. AMG could be loaded into a representative Blank NE at a maximum concentration of 0.2% w/w and did not cause significant changes in physicochemical properties. AMG-NE showed the antibacterial activity against Staphyloccocus aureus and Propionibacterium acnes without toxicity to the skin cells. Therefore, AMG-NE had potential for using in a clinical study to investigate its efficacy and safety in patients.

Gamma sterilization of diclofenac sodium loaded- N-trimethyl chitosan nanoparticles for ophthalmic use.

This study was conducted to investigate the effect of gamma irradiation on physicochemical properties of N-trimethyl chitosan (TMC), diclofenac sodium (DC) and diclofenac sodium loaded N-trimethylchitosan nanoparticles (DC-TMCNs), and to determine suitable doses of gamma rays for sterilization of DC-TMCNs. Physicochemical properties of TMC, DC and DC-TMCNs before and after exposure to gamma rays at various doses were investigated. It was found that gamma irradiation at doses of 5-25kGy did not cause any significant changes in physical and chemical properties of TMC, DC and DC-TMCNs. The bioburden of DC-TMCNs was 1.5×106 CFU/vial. The initial contaminating bacteria were radiosensitive bacteria. A number of microorganisms was reduced to 10-6 after exposure to 9.9kGy of gamma rays. Therefore, DC-TMCNs could be sterilized by gamma irradiation at a dose of 10kGy, which did not alter their physicochemical properties and did not produce any substances toxic to the eye.

Development and Evaluation of Diclofenac Sodium Loaded-N-Trimethyl Chitosan Nanoparticles for Ophthalmic Use.

The ophthalmic preparation of diclofenac sodium (DC) for relieving ocular inflammation is presently available in the market only as an eye drop solution. Due to its low occular bioavailability, it requires frequent application leading to low patients' compliance and quality of life. This study was conducted to develop formulations of DC loaded-N-trimethyl chitosan nanoparticles (DC-TMCNs) for ophthalmic use to improve ocular biavailabiltiy of DC. DC-TMCNs varied in formulation compositions were prepared using ionic gelation technique and evaluated for their physicochemical properties, drug release, eye irritation potential, and ophthalmic absorption of diclofenac sodium. N-Trimethyl chitosan (TMC) with a 49.8% degree of quaternization was synthesized and used for DC-TMCNs production. The obtained DC-TMCNs had particle size in a range of 130-190 nm with zeta potential values of +4 to +9 mV and drug entrapment efficiencies of more than 70% depending on the content of TMC and sodium tripolyphosphate (TPP). The optimized DC-TMCNs formulation contained TMC, DC, and TPP at a weight ratio of TMC/DC/TPP = 3:1:1. Their lyophilized product reconstituted with phosphate buffer solution pH 5.5 possessed a drug release pattern that fitted within the zero-order model. The eye irritation tests showed that DC-TMCNs were safe for ophthalmic use. The in vivo ophthalmic drug absorption study performed on rabbits indicated that DC-TMCNs could improve ophthalmic bioavailability of DC. Results of this study suggested that DC-TMCNs had potential for use as an alternative to conventional DC eye drops for ophthalmic inflammation treatment.

Modification of tapioca starch by non-chemical route using jet atmospheric argon plasma.

Non-chemical modification of tapioca starch was investigated using jet atmospheric argon plasma treatment. Two forms of starch slurry, i.e. granular starch (G) and cooked starch (C), were jet-treated by argon plasma generated by supplying input power of 50 W (denoted as G50 and C50 samples) and 100 W (denoted as G100 and C100 samples) for 5 min. Physical, rheological, and structural characteristics of the modified starch were investigated. The G50 and C100 samples had lower paste clarity but higher thermal stability and performed stronger gels (G50 only) compared to their control counterparts. On the other hand, the analyzed properties of the G100 and C50 samples showed the opposite trend. FTIR and (1)H NMR results revealed that the relative areas of COC and OH peaks were changed after the treatment. Cross-linking reaction seemed to predominantly take place for the G50 and C100 samples, whereas depolymerization predominated for the G100 and C50 samples.

Physicochemical properties and anti-Propionibacterium acnes activity of film-forming solutions containing alpha-mangostin-rich extract.

The objective of this study was to study the effect of formulation compositions on physicochemical properties and anti-Propionibacterium acnes activity of film-forming solutions containing alpha-mangostin-rich extract (AM). Film-forming solution bases and film-forming solutions containing AM were prepared by using Eudragit RL PO or Klucel LF or combinations of them as film-forming polymers. Rheological properties, pH values of the solutions, and mechanical properties of the dry films were investigated. An optimized formulation was selected and evaluated for the film surface, in vitro AM release, an anti-P. acnes activity, and potential for being a skin irritant. It was found that mechanical properties of the dry films were affected by total polymer contents, ratios of Klucel LF/Eudragit RL PO, AM, and contents of triethyl citrate. The film-forming solutions containing AM had pH values around 7.0. Their flow curves exhibited Newtonian flow behaviors. The optimized formulation provided films possessing smooth and nonporous surfaces. These films showed greater anti-P. acnes activity than their base films without toxicity to skin fibroblasts. Furthermore, AM released from the film matrix obeyed Higuchi's equation. In conclusion, the film-forming solutions containing AM had potential for treatment of acne vulgaris caused by P. acnes. However, further in vivo study is necessary to determine their efficacy and safety for using in patients suffering from acne vulgaris.

Effect of cross-linking on physicochemical properties of tapioca starch and its application in soup product.

Physicochemical properties of cross-linked tapioca starch (CLTS) with different cross-linking levels and their application as a thickening agent in soups were studied. The CLTS was prepared by cross-linking native tapioca starch suspended in alkaline solution (41.67% (w/w), pH 11) using a mixture (99:1 (w/w) ratio) of sodium trimetaphosphate (STMP) and sodium tripolyphosphate (STPP) at different concentrations ranged from 0.25% to 6.0% (w/w of starch) at 45°C for 3h. Starch paste clarity decreased with increasing concentration of STMP/STPP mixture. Variations of swelling power, solubility, pasting, gelatinization, and rheological properties of the CLTS were found. Thermogravimetric analysis exhibited higher thermal stability for the CLTS granules compared to the native one. Among the samples, the CLTS prepared using 1.0% STMP/STPP (1.0%-CLTS) and soup containing the 1.0%-CLTS exhibited the strongest gel characteristic and the greatest shear resistant properties. The 1.0%-CLTS improved the textural properties and sensory quality of soups.

Optimization and evaluation of thermoresponsive diclofenac sodium ophthalmic in situ gels.

This work was conducted to optimize and evaluate Pluronic F127-based thermoresponsive diclofenac sodium ophthalmic in situ gels (DS in situ gel). They were prepared by cold method and investigated their physicochemical properties i.e., pH, flow ability, sol-gel transition temperature, gelling capacity and rheological properties. An optimized formulation was selected and investigated its physicochemical properties before and after autoclaving, eye irritation potency in SIRC cells and rabbits. In vivo ophthalmic absorption was performed in rabbits. It was found that physicochemical properties of DS in situ gels were affected by formulation compositions. Increment of Pluronic F127 content decreased sol-gel transition temperature of the products while increase in Pluronic F68 concentration tended to increase sol-gel transition temperature. In this study, Carbopol 940 did not affect sol-gel transition temperature but it affected transparency, pH, and gelling capacity of the products. The optimized formulation exhibited sol-gel transition at 32.6 ± 1.1 °C with pseudoplastic flow behavior. It was lost diclofenac sodium content during autoclaving. However, it was accepted as safe for ophthalmic use and could increase diclofenac sodium bioavailability in aqueous humor significantly. In conclusion, the optimized DS in situ gel had potential for using as an alternative to the conventional diclofenac sodium eye drop. However, autoclaving was not a suitable sterilization method for this product.