Fast Depolymerization of PET Bottle Mediated by Microwave Pre-Treatment and An Engineered PETase.

Invited for this month's cover is the groups of Prof. Minna Hakkarainen, Prof. István Furó and Assoc. Prof. Per-Olof Syrén at KTH Royal Institute of Technology. The image shows how microwave irradiation is an efficient pre-treatment method of polyethylene terephthalate (PET) for subsequent biocatalytic depolymerization. The Research Article itself is available at 10.1002/cssc.202300742.

Fast Depolymerization of PET Bottle Mediated by Microwave Pre-Treatment and An Engineered PETase.

Recycling plastics is the key to reaching a sustainable materials economy. Biocatalytic degradation of plastics shows great promise by allowing selective depolymerization of man-made materials into constituent building blocks under mild aqueous conditions. However, insoluble plastics have polymer chains that can reside in different conformations and show compact secondary structures that offer low accessibility for initiating the depolymerization reaction by enzymes. In this work, we overcome these shortcomings by microwave irradiation as a pre-treatment process to deliver powders of polyethylene terephthalate (PET) particles suitable for subsequent biotechnology-assisted plastic degradation by previously generated engineered enzymes. An optimized microwave step resulted in 1400 times higher integral of released terephthalic acid (TPA) from high-performance liquid chromatography (HPLC), compared to original untreated PET bottle. Biocatalytic plastic hydrolysis of substrates originating from PET bottles responded to 78 % yield conversion from 2 h microwave pretreatment and 1 h enzymatic reaction at 30 °C. The increase in activity stems from enhanced substrate accessibility from the microwave step, followed by the administration of designer enzymes capable of accommodating oligomers and shorter chains released in a productive conformation.

Water as an Intrinsic Structural Element in Cellulose Fibril Aggregates.

While strong water association with cellulose in plant cell walls and man-made materials is well-established, its molecular scale aspects are not fully understood. The thermodynamic consequences of having water molecules located at the microfibril-microfibril interfaces in cellulose fibril aggregates are therefore analyzed by molecular dynamics simulations. We find that a thin layer of water molecules at those interfaces can be in a state of thermal equilibrium with water surrounding the fibril aggregates because such an arrangement lowers the free energy of the total system. The main reason is enthalpic: water at the microfibril-microfibril interfaces enables the cellulose surface hydroxyls to experience a more favorable electrostatic environment. This enthalpic gain overcomes the entropic penalty from strong immobilization of water molecules. Hence, those particular water molecules stabilize the cellulose fibril aggregates, akin to the role of water in some proteins. Structural and functional hypotheses related to this finding are presented.

Timescales for convergence in all-atom molecular dynamics simulations of hydrated amorphous xylan.

Atomistic molecular dynamics simulation is an important complement to experimental techniques for investigating properties of hydrated carbohydrate polymers at the molecular scale. A critical problem is to determine whether or not a simulation has converged to thermal equilibrium before data collection can begin. In this work, simulations of xylan oligomers starting from random configurations at different levels of hydration are performed. The simulations show clear evidence of phase separation into water-rich and polymer-rich phases at higher hydration, in spite of standard indicators of equilibrium, such as density and energy, remaining constant. Using instead a set of parameters that are coupled to the structural and dynamical heterogeneity of the system, it is shown that simulation times on the order of one microsecond are needed to reach an equilibrated state. Moreover, qualitative similarities in the temporal evolution of these parameters suggest significant interplay between the structure and both polymer and water dynamics.

Weak Anion Binding to Poly(N-isopropylacrylamide) Detected by Electrophoretic NMR.

Ion specific effects are ubiquitous in solutions and govern a large number of colloidal phenomena. To date, a substantial and sustained effort has been directed at understanding the underlying molecular interactions. As a new approach, we address this issue by sensitive 1H NMR methods that measure the electrophoretic mobility and the self-diffusion coefficient of poly(N-isopropylacrylamide) (PNIPAM) chains in bulk aqueous solution in the presence of salts with the anion component varied from kosmotropes to chaotropes along the Hofmeister series. The accuracy of the applied electrophoretic NMR experiments is exceptionally high, on the order of 10-10 m2/(V s), corresponding to roughly 10-4 elementary charges per monomer effectively associated with the neutral polymer. We find that chaotropic anions associate to PNIPAM with an apparent Langmuir-type saturation behavior. The polymer chains remain extended upon ion association, and momentum transfer from anion to polymer is only partial which indicates weak attractive short-range forces between anion and polymer and, thereby and in contrast to some other ion-polymer systems, the lack of well-defined binding sites.

Trapped and Alone: Clay-Assisted Aqueous Graphene Dispersions.

Dispersing graphene sheets in liquids, in particular water, could enhance the transport properties (like thermal conductivity) of the dispersion. Yet, such dispersions are difficult to achieve since graphene sheets are prone to aggregate and subsequently precipitate due to their strong van der Waals interactions. Conventional dispersion approaches, such as surface treatment of the sheets either by surfactant adsorption or by chemical modification, may prevent aggregation. Unfortunately, surfactant-assisted graphene dispersions are typically of low concentration (<0.2 wt %) with relatively small sheets (<1 µm lateral size) while chemical modification is punished by increased defect density within the sheets. We investigate here a new approach in which the concentration of dispersed graphene in water is enhanced by the addition of a fibrous clay mineral, sepiolite. As we demonstrate, the clay particles in water form a kinetically arrested particle network within which the graphene sheets are effectively trapped. This mechanism keeps graphene sheets of high lateral size (∼4 µm) dispersed at high concentrations (∼1 wt %). We demonstrate the application of such dispersions as cooling liquids for thermal management solutions, where a 26% enhancement in the thermal conductivity is achieved as compared to that in a filler-free fluid.

Improved accuracy and precision in electrophoretic NMR experiments. Current control and sample cell design.

Electrophoretic NMR has the capacity to provide unique physico-chemical information but is limited by a variety of experimental artifacts, such as thermal convection and electrolytic products in the sample. Here we present some simple modifications to the experimental hardware and protocol that, in a significant number of cases, can much improve experimental accuracy and precision. We show that one can strongly reduce artifacts in a symmetric sample cell with an appropriate feeding of current and with a porous plug suitably inserted. This latter feature requires that the electric field pulses across the sensitive volume are implemented as current-controlled pulses applied to the sample. Measurements with current-controlled pulses have the additional advantage of not requiring calibration with samples of known electrophoretic mobility.

Electro-Responsive Surface Composition and Kinetics of an Ionic Liquid in a Polar Oil.

The quartz crystal microbalance (QCM) has been used to study how the interfacial layer of an ionic liquid dissolved in a polar oil at low weight percentages responds to changes in applied potential. The changes in surface composition at the QCM gold surface depend on both the magnitude and sign of the applied potential. The time-resolved response indicates that the relaxation kinetics are limited by the diffusion of ions in the interfacial region and not in the bulk, since there is no concentration dependence. The measured mass changes cannot be explained only in terms of simple ion exchange; the relative molecular volumes of the ions and the density changes in response to ion exclusion must be considered. The relaxation behavior of the potential between the electrodes upon disconnecting the applied potential is more complex than that observed for pure ionic liquids, but a measure of the surface charge can be extracted from the exponential decay when the rapid initial potential drop is accounted for. The adsorbed film at the gold surface consists predominantly of ionic liquid despite the low concentration, which is unsurprising given the surtactant-like structures of (some of) the ionic liquid ions. Changes in response to potential correspond to changes in the relative numbers of cations and anions, rather than a change in the oil composition. No evidence for an electric field induced change in viscosity is observed. This work shows conclusively that electric potentials can be used to control the surface composition, even in an oil-based system, and paves the way for other ion solvent studies.

Intrinsically disordered protein as carbon nanotube dispersant: How dynamic interactions lead to excellent colloidal stability.

The rich pool of protein conformations combined with the dimensions and properties of carbon nanotubes create new possibilities in functional materials and nanomedicine. Here, the intrinsically disordered protein α-synuclein is explored as a dispersant of single-walled carbon nanotubes (SWNTs) in water. We use a range of spectroscopic methods to quantify the amount of dispersed SWNT and to elucidate the binding mode of α-synuclein to SWNT. The dispersion ability of α-synuclein is good even with mild sonication and the obtained dispersion is very stable over time. The whole polypeptide chain is involved in the interaction accompanied by a fraction of the chain changing into a helical structure upon binding. Similar to other dispersants, we observe that only a small fraction (15-20%) of α-synuclein is adsorbed on the SWNT surface with an average residence time below 10 ms.

Cryoporometry in Femtoliter Volumes by Confocal Raman Spectroscopy.

The properties of porous material are largely dependent on the size, shape, and connectivity of the pores. Here, we present a method based on confocal Raman spectroscopy to quantify porosity using a cryoporometric approach. We show that the phase transition of water imbibed in porous silica can be accurately determined using two different, but complementary methodologies. The first one relies on integrating the temperature-dependent spectral intensities across the whole OH (H2O) or OD (D2O) stretching region. The second, more quantitative approach, deconvolutes the spectral contributions within the pores in terms of liquid and solid fractions. The results show the expected reciprocal dependence of the average phase transition point with pore size, as well as the typical hysteresis between the freezing and melting transitions. One of the key advantages of the confocal Raman approach is its high spatial resolution, with sampling volumes starting from just a few femtoliters, opening the possibility of mapping the structure in heterogeneous porous materials.

Gemini surfactants as efficient dispersants of multiwalled carbon nanotubes: Interplay of molecular parameters on nanotube dispersibility and debundling.

Surfactants have been widely employed to debundle, disperse and stabilize carbon nanotubes in aqueous solvents. Yet, a thorough understanding of the dispersing mechanisms at molecular level is still warranted. Herein, we investigated the influence of the molecular structure of gemini surfactants on the dispersibility of multiwalled carbon nanotubes (MWNTs). We used dicationic n-s-n gemini surfactants, varying n and s, the number of alkyl tail and alkyl spacer carbons, respectively; for comparisons, single-tailed surfactant homologues were also studied. Detailed curves of dispersed MWNT concentration vs. surfactant concentration were obtained through a stringently controlled experimental procedure, allowing for molecular insight. The gemini are found to be much more efficient dispersants than their single-tailed homologues, i.e. lower surfactant concentration is needed to attain the maximum dispersed MWNT concentration. In general, the spacer length has a comparatively higher influence on the dispersing efficiency than the tail length. Further, scanning electron microscopy imaging shows a sizeable degree of MWNT debundling by the gemini surfactants in the obtained dispersions. Our observations also point to an adsorption process that does not entail the formation of micelle-like aggregates on the nanotube surface, but rather coverage by individual molecules, among which the ones that seem to be able to adapt best to the nanotube surface provide the highest efficiency. These studies are relevant for the rational design and choice of optimal dispersants for carbon nanomaterials and other similarly water-insoluble materials.

Non-halogenated Ionic Liquid Dramatically Enhances Tribological Performance of Biodegradable Oils.

It is demonstrated that a phosphonium orthoborate ionic liquid may serve as a wear reducing additive in biodegradable oils at steel-steel surfaces in the boundary lubrication regime. Tribological tests were performed in a ball-on-three plate configuration. A set of surface characterization techniques-SEM/EDS, FIB and white light interferometry were used to characterize surfaces following the tribotests and to observe the formation of any tribofilms. 11B NMR was used to follow changes in the composition of the ionic-liquid-oil blends and to identify boron-containing decomposition products after the tribotests. The ionic liquid reduces the wear of steel surfaces by up to 92% compared to the neat oil at 90°C; it is shown that the reduction in wear can be correlated with the formation of boron enriched patches in the boundary films.

Propofol adsorption at the air/water interface: a combined vibrational sum frequency spectroscopy, nuclear magnetic resonance and neutron reflectometry study.

Propofol is an amphiphilic small molecule that strongly influences the function of cell membranes, yet data regarding interfacial properties of propofol remain scarce. Here we consider propofol adsorption at the air/water interface as elucidated by means of vibrational sum frequency spectroscopy (VSFS), neutron reflectometry (NR), and surface tensiometry. VSFS data show that propofol adsorbed at the air/water interface interacts with water strongly in terms of hydrogen bonding and weakly in the proximity of the hydrocarbon parts of the molecule. In the concentration range studied there is almost no change in the orientation adopted at the interface. Data from NR show that propofol forms a dense monolayer with a thickness of 8.4 Å and a limiting area per molecule of 40 Å2, close to the value extracted from surface tensiometry. The possibility that islands or multilayers of propofol form at the air/water interface is therefore excluded as long as the solubility limit is not exceeded. Additionally, measurements of the 1H NMR chemical shifts demonstrate that propofol does not form dimers or multimers in bulk water up to the solubility limit.

Block Copolymers as Dispersants for Single-Walled Carbon Nanotubes: Modes of Surface Attachment and Role of Block Polydispersity.

When using amphiphilic polymers to exfoliate and disperse carbon nanotubes in water, the balance between the hydrophobic and hydrophilic moieties is critical and nontrivial. Here, we investigate the mode of surface attachment of a triblock copolymer, Pluronics F127, composed of a central hydrophobic polypropylene oxide block flanked by hydrophilic polyethylene oxide blocks, onto single-walled carbon nanotubes (SWNTs). Crucially, we analyze the composition in dispersant of both the as-obtained dispersion (the supernatant) and the precipitate-containing undispersed materials. For this, we combine the carefully obtained data from 1H NMR peak intensities and self-diffusion and thermogravimetric analysis. The molecular motions behind the observed NMR features are clarified. We find that the hydrophobic blocks attach to the dispersed SWNT surface and remain significantly immobilized leading to 1H NMR signal loss. On the other hand, the hydrophilic blocks remain highly mobile and thus readily detectable by NMR. The dispersant is shown to possess significant block polydispersity that has a large effect on dispersibility. Polymers with large hydrophobic blocks adsorb on the surface of the carbonaceous particles that precipitate, indicating that although a larger hydrophobic block is good for enhancing adsorption, it may be less effective in dispersing the tubes. A model is also proposed that consistently explains our observations in SWNT dispersions and some contradicting findings obtained previously in carbon nanohorn dispersions. Overall, our findings help elucidating the molecular picture of the dispersion process for SWNTs and are of interest when looking for more effective (i.e., well-balanced) polymeric dispersants.

Quantifying Size Exclusion by Diffusion NMR: A Versatile Method to Measure Pore Access and Pore Size.

Size-exclusion quantification NMR spectroscopy (SEQ-NMR) is introduced for measuring equilibrium distribution coefficients, Keq, in porous media. The porous medium is equilibrated with a polydisperse polymer solution. The original bulk polymer solution and the polymer solution after equilibration but in the absence of the porous medium are analyzed by NMR diffusion experiments. The joint evaluation of the two diffusion attenuation curves under suitable constraints provides the extent by which polymer fractions of particular size were depleted from the solution by pore access. This procedure yields Keq versus polymer probe size, the selectivity curve that in turn can provide the pore size and its distribution. Simulations probe the performance of the method that is demonstrated experimentally in chromatographic media using dextran polymers. SEQ-NMR and inverse size-exclusion chromatography (ISEC) yield selectivity curves that virtually coincide. Crucial advantages with SEQ-NMR, such as versatility with regard to both the polymer used and porous system explored, high speed, potential for automation, and small required sample volume, are discussed.

Hydration-Dependent Dynamical Modes in Xyloglucan from Molecular Dynamics Simulation of 13C NMR Relaxation Times and Their Distributions.

Macromolecular dynamics in biological systems, which play a crucial role for biomolecular function and activity at ambient temperature, depend strongly on moisture content. Yet, a generally accepted quantitative model of hydration-dependent phenomena based on local relaxation and diffusive dynamics of both polymer and its adsorbed water is still missing. In this work, atomistic-scale spatial distributions of motional modes are calculated using molecular dynamics simulations of hydrated xyloglucan (XG). These are shown to reproduce experimental hydration-dependent 13C NMR longitudinal relaxation times ( T1) at room temperature, and relevant features of their broad distributions, which are indicative of locally heterogeneous polymer reorientational dynamics. At low hydration, the self-diffusion behavior of water shows that water molecules are confined to particular locations in the randomly aggregated XG network while the average polymer segmental mobility remains low. Upon increasing water content, the hydration network becomes mobile and fully accessible for individual water molecules, and the motion of hydrated XG segments becomes faster. Yet, the polymer network retains a heterogeneous gel-like structure even at the highest level of hydration. We show that the observed distribution of relaxations times arises from the spatial heterogeneity of chain mobility that in turn is a result of heterogeneous distribution of water-chain and chain-chain interactions. Our findings contribute to the picture of hydration-dependent dynamics in other macromolecules such as proteins, DNA, and synthetic polymers, and hold important implications for the mechanical properties of polysaccharide matrixes in plants and plant-based materials.

Release of Solubilizate from Micelle upon Core Freezing.

By combining NMR (yielding 1H chemical shift, spin relaxation, and self-diffusion data) and small-angle X-ray scattering experiments, we investigate the complex temperature dependence of the molecular and aggregate states in aqueous solutions of the surfactant [CH3(CH2)17(OCH2CH2)20OH], abbreviated as C18E20, and hexamethyldisiloxane, HMDSO. The latter molecule serves as a model for hydrophobic solubilizates. Previously, the pure micellar solution was demonstrated to exhibit core freezing at approximately 7-8 °C. At room temperature, we find that HMDSO solubilizes at a volume fraction of approximately 10% in the core of the C18E20 micelles, which consists of molten and thereby highly mobile alkyl chains. Upon lowering the temperature, core freezing is found, just like in pure micelles, but at a temperature shifted significantly to 3 °C. The frozen cores contain immobile alkyl chains and exhibit a higher density but are essentially devoid (volume fraction below 1%) of the solubilizate. The latter molecules are released, first gradually and then rather steeply, from the core in the temperature range that is roughly delimited by the two core freezing temperatures, one for pure micelles and one for micelles with solubilizates. The release behavior of systems with different initial HMDSO loading follows the same master curve. This feature is rationalized in terms of loading capacity being strongly temperature dependent: upon lowering the temperature, release commences once the loading capacity descends below the actual solubilizate content. The sharp release curves and the actual release mechanism with its molecular features shown in rich detail have some bearing on a diverse class of possible applications.

Acceleration of diffusion in ethylammonium nitrate ionic liquid confined between parallel glass plates.

Diffusion of EAN confined between polar glass plates separated by a few micrometers is higher by a factor of ca. 2 as compared to bulk values. Formation of a new phase, different to the bulk, was suggested.

Complexing Cations by Poly(ethylene oxide): Binding Site and Binding Mode.

The binding of K+ and Ba2+ cations to short poly(ethylene oxide) (PEO) chains with ca. 4-25 monomeric units in methanol was studied by determining the effective charge of the polymer through a combination of electrophoretic NMR and diffusion NMR experiments. These cations were previously found to bind to long PEO chains in a similar strong manner. In addition, 1H chemical shift and longitudinal spin relaxation rate changes upon binding were quantified. For both systems, binding was stronger for the short chains than that for the longer chains, which is attributed mainly to interactions between bound ions. For K+ ions, the equilibrium binding constant of a cation to a binding site was measured. For both cations, the binding site was estimated to consist of ca. six monomeric units that coordinated with the respective ions. For the systems with barium, a significant fraction of the bound ions are (BaAnion)+ ion pairs. This leads to a strong anion effect in the effective charge of the oligomers acquired upon barium ion binding. For K+, the coordinating oligomer segment remains rather mobile and individual oligomers exchange rapidly (≪s) between their free and ion-complexing states. In contrast, segmental dynamics slows significantly for the oligomer section that coordinates with the barium species, and for individual oligomers, binding and nonbinding sections do not exchange on the time scale of seconds. Hence, oligomers also exchange slowly (>s) between their free and barium complexing states.

Mechanical agitation induces counterintuitive aggregation of pre-dispersed carbon nanotubes.

Mechanical agitation is commonly used to fragment and disperse insoluble materials in liquids. However, here we show that when pristine single-walled carbon nanotubes pre-dispersed in water are subject to vortex-shaking for very short periods (typically 10-60s, power density ∼0.002WmL-1), re-aggregation counterintuitively occurs. The initial dispersions are produced using surfactants as dispersants and powerful tip sonication (∼1WmL-1) followed by centrifugation. Detailed imaging by light and electron microscopies shows that the vortex-induced aggregates consist of loose networks (1-102µm in size) of intertwined tubes and thin bundles. The average aggregate size increases with vortexing time in an apparently logarithmic manner and depends on the dispersant used, initial concentration of nanotubes and size distribution of bundles. The aggregation is, nonetheless, reversible: if the vortex-shaken dispersions are mildly bath-sonicated (∼0.03WmL-1), the flocs break down and re-dispersal occurs. Molecular insight for the mechanism behind this surprising phenomenon is put forth.