New Triazole-Isoxazole Hybrids as Antibacterial Agents: Design, Synthesis, Characterization, In Vitro, and In Silico Studies.

Novel isoxazole-triazole conjugates have been efficiently synthesized using 3-formylchromone as starting material according to a multi-step synthetic approach. The structures of the target conjugates and intermediate products were characterized by standard spectroscopic techniques (1H NMR and 13C NMR) and confirmed by mass spectrometry (MS). The all-synthesized compounds were screened for their antibacterial activity against three ATCC reference strains, namely Staphylococcus aureus ATCC 25923, Staphylococcus aureus ATCC BAA-44, and Escherichia coli ATCC 25922 as well as one strain isolated from the hospital environment Pseudomonas aeruginosa. The findings indicate that conjugate 7b exhibits a stronger antibacterial response against the tested Escherichia coli ATCC 25922 and Pseudomonas aeruginosa pathogenic strains compared to the standard antibiotics. Furthermore, hybrid compound 7b proved to have a bactericidal action on the Escherichia coli ATCC 25922 strain, as evidenced by the results of the MBC determination. Moreover, the ADMET pharmacokinetic characteristics revealed a favorable profile for the examined compound, as well as a good level of oral bioavailability. Molecular docking and molecular dynamics simulations were performed to explore the inhibition mechanism and binding energies of conjugate 7b with the proteins of Escherichia coli and Pseudomonas aeruginosa bacterial strains. The in silico results corroborated the data observed in the in vitro evaluation for compound 7b.

Agastache Species (Lamiaceae) as a Valuable Source of Volatile Compounds: GC-MS Profiling and Investigation of In Vitro Antibacterial and Cytotoxic Activities.

Nowadays, there is an increasing interest in the study of medicinal and aromatic plants, due to their therapeutic properties that correlate with the presence of different active compounds. Agastache species (sp.) are aromatic plants that belong to the Lamiaceae family, originating from North America and East Asia. The present study aimed to evaluate the composition of essential oils (EOs) obtained from different Romanian cultivated Agastache sp. and to investigate their antibacterial and cytotoxic activities. The gas chromatography-mass spectrometry (GC-MS) screening revealed that menthone was the dominant constituent of A. foeniculum (31.58%), A. rugosa (39.60%) and A. rugosa 'After Eight' (39.76%) EOs, while estragole was the major constituent of A. foeniculum "Aromat de Buzau" (63.27%) and A. mexicana (41.66%) EOs. The investigation of the antiproliferative effect showed that A. rugosa and A. foeniculum "Aromat de Buzau" EOs had significant cytotoxic activity on MDA-MB-231 and HEPG2 tumour cell lines, with the most promising effect on the MDA-MB-231 breast cancer cell line for A. foeniculum "Aromat de Buzau" EO (IC50 = 203.70 ± 0.24 µg/mL). Regarding the antibacterial activity, A. rugosa EO was most active against E. coli (8.91 ± 3.27 µL/mL) and S. aureus (10.80 ± 0.00 µL/mL). To the best of our knowledge, this is the first report on the cytotoxic effect of Agastache sp. EOs on MDA-MB-231, HCT116 and HEPG2 tumour cell lines. The results of our study provide new and promising information for the subsequent in vivo study of the pharmacological properties of Agastache sp. essential oils.

Metal Complexes Containing Homoleptic Diorganoselenium(II) Ligands: Synthesis, Characterization and Investigation of Optical Properties.

[(Z)-2'-{2-C6H5-(4H)-oxazol-5-one}CHC6H4]2Se (5, L1) and [(Z)-4'-{2-C6H5-(4H)-oxazol-5-one}CHC6H4]2Se (6, L2) were prepared, structurally characterized and used as ligands to obtain new metal complexes of types [MX(Ln)] [L1: M = Ag, X = OTf (7); M = Au, X = Cl (13); L2: M = Ag, X = OTf (8); M = Au, X = Cl (14)], [(MX)2(Ln)] [M = Ag, X = OTf, L1 (9); L2 (10)], [ZnCl2(Ln)] [L1 (15); L2 (16)] and [Ag(Ln)][PF6] [L1 (11); L2 (12)]. The silver complexes 7 and 8 were ionic species (1:1 electrolytes) in a MeCN solution, while in the solid state, the triflate fragments were bonded to the silver cations. Similarly, the 2:1 complexes 9 and 10 were found to behave as 1:2 electrolytes in a MeCN solution, but single-crystal X-ray diffraction demonstrated that compound 9 showed the formation of a dimer in the solid state: a tetranuclear [Ag(OTf)]4 built through bridging triflate ligands was coordinated by two bridging organoselenium ligands through the nitrogen from the oxazolone ring and the selenium atoms in a 1κN:2κSe fashion. Supramolecular architectures supported by intermolecular C-H∙∙∙π, C-H∙∙∙O, Cl∙∙∙H and F∙∙∙H interactions were observed in compounds 4, 5 and 9. The compounds exhibited similar photophysical properties, with a bathochromic shift in the UV-Vis spectra caused by the position of the oxazolone ring on the phenyl ring attached to the selenium atoms.

Unraveling the Potential of Organic Oregano and Tarragon Essential Oils: Profiling Composition, FT-IR and Bioactivities.

Oregano and tarragon are widely cultivated culinary herbs used for food seasoning, having familiar characteristic aromas appreciated by the wide public. The aim of this research was to characterize essential oils (EOs) from locally sourced organic oregano and tarragon (Cluj, Romania) and study their bioactivity potential. Results showed that oregano EO had a sesquiterpene dominant profile responsible for strong bands between 2800 and 3000 cm-1 on the Fourier transform infrared spectroscopy (FT-IR) spectrum and a composition consistent with reports from similar climatic regions. The tarragon EO profile was defined by phenylpropanoids responsible for the strong sharp peaks between 1000 and 1600 cm-1 on the FT-IR spectrum. In oregano EO, 22 compounds were identified with ß-caryophyllene as a major constituent. In tarragon EO, 20 compounds were identified with eugenol as a major constituent. Oregano EO had a stronger antibacterial effect against both Gram-negative and Gram-positive bacterial strains, while tarragon EO had a slightly stronger cytotoxic effect on three types of cancer cell lines tested (skin melanoma, prostate carcinoma, and colorectal adenocarcinoma). It was concluded that, given the fact that a sufficient supply of high-quality plant material can be available for EO extraction, culinary herbs can become reliable candidates for many industries without the risk of discontinued supply. Therefore, research aiming to widen their potential applications is welcome and worth pursuing.

Contribution of Saccharomyces and Non-Saccharomyces Yeasts on the Volatile and Phenolic Profiles of Rosehip Mead.

The resurgence of mead, a honey-based fermented beverage, is attributed to the increasing consumption of fermented foods and beverages, driven by its distinct flavors and perceived health benefits. This study investigates the influence of different yeast strains, namely Saccharomyces cerevisiae var. bayanus, and Torulaspora delbrueckii, on the volatile and phenolic compounds of these beverages. Analytical techniques, including HPLC-DAD and GS/MS, were employed to analyze the chemical composition of the beverages. ANOVA analysis of variance was conducted to assess differences in the volatile and phenolic compounds. The findings reveal that yeast selection significantly impacts the chemical profiles of the beverages. Saccharomyces cerevisiae fermentation preserves rosehip-specific flavonoids and phenolic acids. Sequential fermentation with Torulaspora delbrueckii demonstrated proficiency in generating esters, contributing to fruity and floral aromas in the beverages. This study investigates the importance of yeast selection in shaping the chemical composition of rosehip mead, providing insights into the distinct characteristics conferred by different yeast strains. By optimizing yeast selection and fermentation techniques, the overall quality and diversity of these beverages can be enhanced.

L-Poly(lactic acid) Production by Microwave Irradiation of Lactic Acid Obtained from Lignocellulosic Wastes.

L-polylactic acid (PLA), a semi-crystalline aliphatic polyester, is one of the most manufactured biodegradable plastics worldwide. The objective of the study was to obtain L-polylactic acid (PLA) from lignocellulosic plum biomass. Initially, the biomass was processed via pressurized hot water pretreatment at a temperature of 180 °C for 30 min at 10 MPa for carbohydrate separation. Cellulase and the beta-glucosidase enzymes were then added, and the mixture was fermented with Lacticaseibacillus rhamnosus ATCC 7469. The resulting lactic acid was concentrated and purified after ammonium sulphate and n-butanol extraction. The productivity of L-lactic acid was 2.04 ± 0.18 g/L/h. Then, the PLA was synthesized in two stages. Firstly, lactic acid was subjected to azeotropic dehydration at 140 °C for 24 h in the presence of xylene, using SnCl2 (0.4 wt.%) as a catalyst, resulting in lactide (CPLA). Secondly, microwave-assisted polymerization was carried out at 140 °C for 30 min with 0.4 wt.% SnCl2. The resulting powder was purified with methanol to produce PLA with 92.1% yield. The obtained PLA was confirmed using electrospray ionization mass spectrometry, nuclear magnetic resonance, thermogravimetric analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. Overall, the resulting PLA can successfully replace the traditional synthetic polymers used in the packaging industry.

Poly(3-hydroxybutyrate) Production from Lignocellulosic Wastes Using Bacillus megaterium ATCC 14581.

This study aimed to analyze the production of poly(3-hydroxybutyrate) (PHB) from lignocellulosic biomass through a series of steps, including microwave irradiation, ammonia delignification, enzymatic hydrolysis, and fermentation, using the Bacillus megaterium ATCC 14581 strain. The lignocellulosic biomass was first pretreated using microwave irradiation at different temperatures (180, 200, and 220 °C) for 10, 20, and 30 min. The optimal pretreatment conditions were determined using the central composite design (CCD) and the response surface methodology (RSM). In the second step, the pretreated biomass was subjected to ammonia delignification, followed by enzymatic hydrolysis. The yield obtained for the pretreated and enzymatically hydrolyzed biomass was lower (70.2%) compared to the pretreated, delignified, and enzymatically hydrolyzed biomass (91.4%). These hydrolysates were used as carbon substrates for the synthesis of PHB using Bacillus megaterium ATCC 14581 in batch cultures. Various analytical methods were employed, namely nuclear magnetic resonance (1H-NMR and13C-NMR), electrospray ionization mass spectrometry (EI-MS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA), to identify and characterize the extracted PHB. The XRD analysis confirmed the partially crystalline nature of PHB.

Fracture Behavior and Integrity of Different Direct Restorative Materials to Restore Noncarious Cervical Lesions.

The purpose of this study was to analyze the fracture resistance and marginal leakage of noncarious cervical lesion (NCCL) restorations made of different restorative materials. Eighty upper premolars were randomly divided into four groups (n = 20/group). Standardized NCCL cavity preparations were performed on the buccal surface of the teeth and then restored with four different materials. Group 1: Packable resin composite (PC); Group 2: Highly flowable resin composite (HF); Group 3: Low flowable resin composite (LF); Group 4: Resin modified glass ionomer cement (RMGIC). After restorations were completed, cyclic and static fracture behavior was evaluated using a loading testing machine. Extra restored teeth were sectioned and then stained (n = 5/group). The specimens were viewed under a stereo microscope and the percentage of microgaps at the tooth-restoration interface was calculated. All restored teeth survived after fatigue loading. There was no statistically significant (p > 0.05) difference between the tested restorations after the static loading test. NCCLs restored with highly filled flowable composite showed the least microleakage among the tested groups (p < 0.05). The investigated restorative materials are acceptable for NCCL restorations in terms of fracture resistance and microleakage.

ß-Ketophosphonates with Pentalenofuran Scaffolds Linked to the Ketone Group for the Synthesis of Prostaglandin Analogs.

ß-Ketophosphonates with pentalenofurane fragments linked to the keto group were synthesized. The bulky pentalenofurane skeleton is expected to introduce more hindrance in the prostaglandin analogues of type III, greater than that obtained with the bicyclo[3.3.0]oct(a)ene fragments of prostaglandin analogues I and II, to slow down (retard) the inactivation of the prostaglandin analogues by oxidation of 15α-OH to the 15-keto group via the 15-PGDH pathway. Their synthesis was performed by a sequence of three high yield reactions, starting from the pentalenofurane alcohols 2, oxidation of alcohols to acids 3, esterification of acids 3 to methyl esters 4 and reaction of the esters 4 with lithium salt of dimethyl methanephosphonate at low temperature. The secondary compounds 6b and 6c were formed in small amounts in the oxidation reactions of 2b and 2c, and the NMR spectroscopy showed that their structure is that of an ester of the acid with the starting alcohol. Their molecular structures were confirmed by single crystal X-ray determination method for 6c and XRPD powder method for 6b.

Novel (Phenothiazinyl)Vinyl-Pyridinium Dyes and Their Potential Applications as Cellular Staining Agents.

We report here the synthesis and structural characterization of novel cationic (phenothiazinyl)vinyl-pyridinium (PVP) dyes, together with optical (absorption/emission) properties and their potential applicability as fluorescent labels. Convective heating, ultrasound irradiation and mechanochemical synthesis were considered as alternative synthetic methodologies proficient for overcoming drawbacks such as long reaction time, nonsatisfactory yields or solvent requirements in the synthesis of novel dye (E)-1-(3-chloropropyl)-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium bromide 3d and its N-alkyl-2-methylpyridinium precursor 1c. The trans geometry of the newly synthesized (E)-4-(2-(7-bromo-10-ethyl-10H-phenothiazin-3-yl)vinyl)-1-methylpyridin-1-ium iodide 3b and (E)-1-methyl-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium tetrafluoroborate 3a' was confirmed by single crystal X-ray diffraction. A negative solvatochromism of the dyes in polar solvents was highlighted by UV-Vis spectroscopy and explanatory insights were supported by molecular modeling which suggested a better stabilization of the lowest unoccupied molecular orbitals (LUMO). The photostability of the dye 3b was investigated by irradiation at 365 nm in different solvents, while the steady-state and time-resolved fluorescence properties of dye 3b and 3a' in solid state were evaluated under one-photon excitation at 485 nm. The in vitro cytotoxicity of the new PVP dyes on B16-F10 melanoma cells was evaluated by WST-1 assay, while their intracellular localization was assessed by epi-fluorescence conventional microscopy imaging as well as one- and two-photon excited confocal fluorescence lifetime imaging microscopy (FLIM). PVP dyes displayed low cytotoxicity, good internalization inside melanoma cells and intense fluorescence emission inside the B16-F10 murine melanoma cells, making them suitable staining agents for imaging applications.

Ultrasound-assisted Strecker synthesis of novel 2-(hetero)aryl-2-(arylamino)acetonitrile derivatives.

This work describes an efficient, simple, and ecofriendly sonochemical procedure for the preparation of new α-(arylamino)acetonitrile derivatives C-substituted with phenothiazine or ferrocene units. The synthetic protocol is based on the Strecker reaction of a (hetero)aryl aldimine substrate with trimethylsilyl cyanide (TMSCN) in poly(ethylene glycol) (PEG) solution. The advantages of the sonochemical versus the conventional α-(arylamino)acetonitrile synthesis are the significantly shorter reaction time (30 min instead of 72 hours), the higher purity and the easier separation of the product that precipitated from the reaction mixture in crystalline form as depicted by scanning electron microscopy (SEM) analysis. The single crystal X-ray diffraction analysis disclosed the arrangement of the α-(arylamino)acetonitrile molecules in the aggregated crystalline state as a racemic mixture. The mutagenic/antimutagenic potential for three representative derivatives containing phenothiazinyl, ferrocenyl, and phenyl units, respectively, was evaluated by the Ames Salmonella/microsome test using S. typhimurium TA98 and TA100 strains with and without metabolic activation. The preliminary screening results pointed out that the C-(hetero)aryl-α-(arylamino)acetonitrile derivatives can be considered genotoxically safe and possibly antimutagenic.

Ethyne Functionalized Meso-Phenothiazinyl-Phenyl-Porphyrins: Synthesis and Optical Properties of Free Base Versus Protonated Species.

Synthesis, structural characterization and photophysical properties for a series of new trans-A2B2- and A3B-type ethynyl functionalized meso-phenothiazinyl-phenyl porphyrin derivatives are described. The new compounds displayed the characteristic porphyrin absorption spectra slightly modified by weak auxochromic effects of the substituents and fluorescence emission in the range of 651-659 nm with 11-25% quantum yields. The changes recorded in the UV-vis absorption spectra in the presence of trifluoroacetic acid (TFA) are consistent with the protonation of the two internal nitrogen atoms of the free-base porphyrin (19 nm bathochromic shift of the strong Soret band and one long wave absorption maxima situated in the range of 665-695 nm). Protonation of the phenothiazine substituents required increased amounts of TFA and produced a distinct hypsochromic shift of the long wave absorption maxima. The density functional theory (DFT) calculations of a porphyrin dication pointed out a saddle-distorted porphyrin ring as the ground-state geometry.

Novel Phenothiazine-Bridged Porphyrin-(Hetero)aryl dyads: Synthesis, Optical Properties, In Vitro Cytotoxicity and Staining of Human Ovarian Tumor Cell Lines.

We report here the synthetic procedure applied for the preparation of new AB3-type and trans-A2B2 type meso-halogenophenothiazinyl-phenyl-porphyrin derivatives, their metal core complexation and their peripheral modification using Suzuki-Miyaura cross coupling reactions with various (hetero)aryl (phenothiazinyl, 7-formyl-phenothiazinyl, (9-carbazolyl)-phenyl and 4-formyl-phenyl, phenyl) boronic acid derivatives. The meso-phenothiazinyl-phenyl-porphyrin (MPP) dyes family was thus extended by a series of novel phenothiazine-bridged porphyrin-(hetero)aryl dyads characterized by UV-Vis absorption/emission properties typical to the porphyrin chromophore, slightly modulated by increasing the size of peripheral substituents. Three phenothiazine-bridged porphyrin-heteroaryl dyads with fluorescence emission above 655 nm were selected as fluorophores in red spectral region for applications in cellular staining of human ovarian tumors. In vitro experiments of cell metabolic activity displayed a moderate toxicity on human ovarian tumor cell lines (OVCAR-3, cisplatin-sensitive A2780 and cisplatin-resistant A2780cis respectively). Visualization of the stained living cells was performed both by fluorescence microscopy imaging and by fluorescence lifetime imaging under two photon excitation (TPE-FLIM), confirming their cellular uptake and the capability of staining the cell nucleus.

Excess Ascorbate is a Chemical Stress Agent against Proteins and Cells.

Excess ascorbate (as expected in intravenous treatment proposed for COVID-19 management, for example) oxidizes and/or degrades hemoglobin and albumin, as evidenced by UV-vis spectroscopy, gel electrophoresis, and mass spectrometry. It also degrades hemoglobin in intact blood or in isolated erythrocytes. The survival rates and metabolic activities of several leukocyte subsets implicated in the antiviral cellular immune response are also affected. Excess ascorbate is thus an unselective biological stress agent.

Nitrogen-Doped Graphene: The Influence of Doping Level on the Charge-Transfer Resistance and Apparent Heterogeneous Electron Transfer Rate.

Three nitrogen-doped graphene samples were synthesized by the hydrothermal method using urea as doping/reducing agent for graphene oxide (GO), previously dispersed in water. The mixture was poured into an autoclave and placed in the oven at 160 °C for 3, 8 and 12 h. The samples were correspondingly denoted NGr-1, NGr-2 and NGr-3. The effect of the reaction time on the morphology, structure and electrochemical properties of the resulting materials was thoroughly investigated using scanning electron microscopy (SEM) Raman spectroscopy, X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), elemental analysis, Cyclic Voltammetry (CV) and electrochemical impedance spectroscopy (EIS). For NGr-1 and NGr-2, the nitrogen concentration obtained from elemental analysis was around 6.36 wt%. In the case of NGr-3, a slightly higher concentration of 6.85 wt% was obtained. The electrochemical studies performed with NGr modified electrodes proved that the charge-transfer resistance (Rct) and the apparent heterogeneous electron transfer rate constant (Kapp) depend not only on the nitrogen doping level but also on the type of nitrogen atoms found at the surface (pyrrolic-N, pyridinic-N or graphitic-N). In our case, the NGr-1 sample which has the lowest doping level and the highest concentration of pyrrolic-N among all nitrogen-doped samples exhibits the best electrochemical parameters: a very small Rct (38.3 Ω), a large Kapp (13.9 × 10-2 cm/s) and the best electrochemical response towards 8-hydroxy-2'-deoxyguanosine detection (8-OHdG).

Detection of 8-Hydroxy-2'-Deoxyguanosine Biomarker with a Screen-Printed Electrode Modified with Graphene.

In this work we present the preparation of graphene material by exfoliation of graphite rods via pulses of current in electrolyte, containing a mixture of boric acid (0.05 M) and sodium chloride (0.05 M). The material was morphologically and structurally characterized by SEM/TEM/HR-TEM, XRD and FTIR techniques. TEM investigation of graphene flakes deposited onto carbon-coated grids allowed the visualization of thin and transparent regions, attributed to few-layer graphene (FLG), as well as thick and dark regions attributed to multi-layer graphene (MLG). The mixed composition of the material was additionally confirmed by XRD, which further indicated that the amount of FLG within the sample was around 83%, while MLG was around 17%. The performance of a screen-printed electrode (SPE) modified with graphene (SPE-Gr) was tested for 8-hydroxy-2'-deoxyguanosine detection. The graphene-modified electrode had a higher sensitivity in comparison with that of SPE, both in standard laboratory solutions (phosphate buffered saline-PBS) and in human saliva.

Exploring the substrate scope of ferulic acid decarboxylase (FDC1) from Saccharomyces cerevisiae.

Ferulic acid decarboxylase from Saccharomyces cerevisiae (ScFDC1) was described to possess a novel, prenylated flavin mononucleotide cofactor (prFMN) providing the first enzymatic 1,3-dipolar cycloaddition mechanism. The high tolerance of the enzyme towards several non-natural substrates, combined with its high quality, atomic resolution structure nominates FDC1 an ideal candidate as flexible biocatalyst for decarboxylation reactions leading to synthetically valuable styrenes. Herein the substrate scope of ScFDC1 is explored on substituted cinnamic acids bearing different functional groups (-OCH3, -CF3 or -Br) at all positions of the phenyl ring (o-, m-, p-), as well as on several biaryl and heteroaryl cinnamic acid analogues or derivatives with extended alkyl chain. It was found that E. coli whole cells expressing recombinant ScFDC1 could transform a large variety of substrates with high conversion, including several bulky aryl and heteroaryl cinnamic acid analogues, that characterize ScFDC1 as versatile and highly efficient biocatalyst. Computational studies revealed energetically favoured inactive binding positions and limited active site accessibility for bulky and non-linear substrates, such as 2-phenylthiazol-4-yl-, phenothiazine-2-yl- and 5-(4-bromophenyl)furan-2-yl) acrylic acids. In accordance with the computational predictions, site-directed mutagenesis of residue I330 provided variants with catalytic activity towards phenothiazine-2-yl acrylic acid and provides a basis for altering the substrate specificity of ScFDC1 by structure based rational design.

UV-light mediated green synthesis of silver and gold nanoparticles using Cornelian cherry fruit extract and their comparative effects in experimental inflammation.

The purpose of our study is to investigate the comparative effects of materials based on silver and gold nanoparticles functionalized with polyphenols from Cornus Mas extract (AgNPs-CM and AuNPs-CM) in vivo on experimental inflammation. The nanoparticles were obtained at room temperature under UV irradiation and were characterized by different methods: ultraviolet-visible spectroscopy, transmission electron microscopy, X ray diffraction, Fourier transform infrared spectroscopy and dynamic light scattering. The modulatory effects of AgNPs-CM and AuNPs-CM on inflammation were quantified by oxidative stress parameters, pro and anti-inflammatory cytokines levels and apoptosis assessment at 2 h, 24 and 48 h after induction of inflammation with carrageenan in the paw tissue of Wistar rats. Our results showed that silver and gold nanoparticles only partial and for a short period have mobilized the antioxidant defense mechanisms. In addition, they diminished inflammation and apoptosis in the early stage while later, at 48 h, exerted an immunomodulatory effect, activated ERK ½ and induced apoptosis. The photoreduced silver and gold nanoparticles, functionalized with natural compounds, modulated the inflammation in a similar manner in the soft tissue injected with carrageenan. In order to decipher the mechanisms involved in interactions of metallic nanoparticles with biological systems and for a complete assessment of the risks and benefits of these products in clinical practice long term studies are necessary.

Design, synthesis and structure of novel G-2 melamine-based dendrimers incorporating 4-(n-octyloxy)aniline as a peripheral unit.

Background: 4-(n-Octyloxy)aniline is a known component in the elaboration of organic materials with mesogenic properties such as N-substituted Schiff bases, perylene bisimide assemblies with a number of 2-amino-4,6-bis[4-(n-octyloxy)phenylamino]-s-triazines, amphiphilic azobenzene-containing linear-dendritic block copolymers and G-0 monomeric or dimeric dendritic liquid crystals with photochromic azobenzene mesogens. The present ab initio study explores a previously unknown use of 4-(n-octyloxy)aniline in the synthesis, structure and supramolecular behaviour of new dendritic melamines. Results: Starting from 4-(n-octyloxy)aniline, seven G-2 melamine-based dendrimers were obtained in 29-79% overall yields. Their iterative convergent- and chemoselective synthesis consisted of SN2-Ar aminations of cyanuric chloride and final triple N-acylations and Williamson etherifications (→ G-2 covalent trimers) or stoichiometric carboxyl/amino 1:3 neutralisations (→ G-2 ionic trimers). These transformations connected G-1 chloro- and amino-termini dendrons to m-trivalent cores (triazin-2,4,6-triyl and benzene-1,3,5-triyl units) or tripodands (central building blocks), such as N-substituted melamines with 4-hydroxyphenyl or phenyl-4-oxyalkanoic motifs. Owing to the diversity of cores and central building blocks, the structural assortment of the dendritic series was disclosed by solvation effects (affecting reactivity), rotational stereodynamism and self-organisation phenomena (determining a vaulted and/or propeller macromolecular shape in solution). DFT calculations (in solution), (VT) NMR and IR (KBr) spectroscopy supported these assignments. TEM analysis revealed the ability of the title compounds towards self-assembling into homogeneously packed spherical nano-aggregates. Conclusions: The (non)covalent synthesis and step-by-step structural elucidation of novel G-2 melamine dendrimers based on 4-(n-octyloxy)aniline are reported. Our study demonstrates the crucial influence of the nature (covalent vs ionic) of the dendritic construction in tandem with that of its central building blocks on the aptitude of dendrimers to self-organise in solution and to self-assembly in the solid state.

Fe(III) - Sulfide interaction in globins: Characterization and quest for a putative Fe(IV)-sulfide species.

The present study reports findings regarding the contrast between H2S interaction with bovine hemoglobin (Hb) and horse heart myoglobin (Mb), in terms of binding and dissociation kinetics, affinities, and mechanism. At pH9.5, oxidation of ferric-sulfide adducts in presence of no free sulfide, using hexachloroiridate as oxidant is examined using stopped-flow UV-vis, EPR, vibrational spectroscopy and mass spectrometry. Oxidation of the ferric-sulfide adduct in such conditions occurs with a putative unstable Fe(IV)-sulfide adduct as intermediate that finally leads to a paramagnetic ferric species with distinct EPR features. As detected by MS spectrometry, this final species appears to be a truncated form of globin at a distinct Tyr. In case of Hb, only ß-chain is truncated at Tyr144.