Quantitative matrix-assisted laser desorption ionization-time-of-flight mass spectrometry analysis of synthetic polymers and peptides.

Matrix-assisted laser desorption ionization (MALDI) is a very powerful and widely used mass spectrometric technique to ionize high molecular weight compounds. The most commonly used dried droplet (DD) technique can lead to a concentration distribution of the analyte on the target and is therefore often not suitable for reproducible analyses. We developed a new solvent-free deposition technique, called compressed sample (CS), to prevent the distribution of the analytes caused by the crystallization of the compounds. The CS technique presented in this work allows the quantitative analysis of synthetic polymers such as derivatized maltosides with correlation coefficients of 0.999 and peptides up to 3500 Da with correlation coefficients of at least 0.982 without the use of stable-isotope-labeled standards.

Combination of chemical and electron-impact ionisation with GC x GC-qMS for characterization of fatty alcohol alkoxylate polymers in the low-molecular-weight range up to 700 Da.

The class of fatty alcohol alkoxylates describes surfactants that are synthesised by reaction of fatty alcohols with alkoxides such as ethylene oxide or propylene oxide or a combination of both as copolymers. Such alkoxylates are used, for example, as nonionic surfactants in home and industrial cleaning and washing agents. Chemical characteristics of such alkoxylate copolymers, for example the degree of alkoxylation, the arrangement of building blocks (random or block polymerisation), the type of the starter, and endcapping, play an important role in application behaviour. The analysis of these characteristics is challenging because in many cases such copolymers have high polydispersity and a large number of constitutional isomers depending on the degree of alkoxylation. Furthermore, the alkoxylates often occur in a complex multicomponent matrix. Here we present a method for characterization of silylated fatty alcohol alkoxylates in the low-molecular-weight range by means of comprehensive two-dimensional gas chromatography-mass spectrometry with electron impact and chemical ionisation. This method also enables detailed analysis of the alkoxylates in a complex matrix such as modern detergents.

Analysis of special surfactants by comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry.

Multidimensional gas-chromatographic analyses of olesochemically based nonionic, anionic and several cationic surfactants in industrial cleaners are demonstrated. Comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry allows the simultaneous determination of fatty alcohols, fatty alcohol sulphates and alkyl polyglucosides. In addition, the determination of fatty alcohol ethoxylates up to C(10)EO(8) (highest degree of ethoxylation) and C(18)EO(5) (longest C-chain at an ethoxylation degree of five) and the analysis of fatty alcohol alkoxylates that contain ethoxy (EO) and propoxy (PO) groups could be realized. Because of decomposition in the injector and a weak EI-fragmentation, cationic surfactants such as alkyl benzyl dimethyl ammonium chloride could also be identified by their characteristic fragments. Thermogravimetric analyses confirmed that the temperature in a normal GC injector is not high enough to cause thermal decomposition of esterquats. However, we could demonstrate that a modified silylation procedure forms decomposition products of esterquats in the GC injector which are detectable by GCxGC-(TOF)MS and allows the identification of such GC-atypical analytes.

Degradation of reactive dyes in wastewater from the textile industry by ozone: analysis of the products by accurate masses.

The present work describes the use of ozone to degrade selected reactive dyes from the textile industry and the analysis of the resulting complex mixture by liquid chromatography/mass spectrometry (LC-MS). To allow certain identification of the substances detected in the wastewater, the original dyes were also investigated either separately or in a synthetic mixture of three dyes (trichromie). Since the reactive dyes are hydrolyzed during the dyeing process, procedures for the hydrolysis were worked out first for the individual dyes. The ozonated solutions were concentrated by solid-phase extraction, which separated very polar or ionic substances from moderately polar degradation products. The latter, which are the primary degradation products, were investigated by liquid chromatography/mass spectrometry with a tandem quadrupole time-of-flight mass analyzer. Accurate masses, which in most cases could be determined with a deviation of

Development of a multipurpose ion source for LC-MS and GC-API MS.

Over the past decade, multimode ion sources operating at atmospheric pressure (i.e., more than one ionization method is operative in the ion source enclosure) have received considerable interest. Simultaneous operation of different ionization methods targeting different compound classes within one analysis run has several advantages, including enhanced sample throughput and thus significant laboratory cost reductions. Potential drawbacks are enhanced ion suppression and other undesirable effects of the simultaneous operation of ionization methods. In this contribution we present an alternative approach-the development and characterization of a widely applicable, multipurpose ion source operating at atmospheric pressure. The optimized source geometry allows rapid changing from LC-API methods (ESI, APCI, APLI) to GC-API methods (APCI, APLI, DA-APLI) along with the appropriate coupling of chromatographic equipment required. In addition, true multimode operation of the source is demonstrated for LC-ESI/APLI and LC-APCI/APLI.

The distribution of ion acceptance in atmospheric pressure ion sources: spatially resolved APLI measurements.

It is demonstrated that spatially resolved mass selected analysis using atmospheric pressure laser ionization mass spectrometry (APLI MS) represents a new powerful tool for mechanistic studies of ion-molecule chemistry occurring within atmospheric pressure (AP) ion sources as well as for evaluation and optimization of ion source performance. A focused low-energy UV laser beam is positioned computer controlled orthogonally on a two-dimensional grid in the ion source enclosure. Resonance enhanced multiphoton ionization (REMPI) of selected analytes occurs only within the confined volume of the laser beam. Depending on the experimental conditions and the reactivity of the primary photo-generated ions, specific signal patterns become visible after data treatment, as visualized in, e.g., contour or pseudo-color plots. The resulting spatial dependence of sensitivity is defined in this context as the distribution of ion acceptance (DIA) of the source/analyzer combination. This approach provides a much more detailed analysis of the diverse processes occurring in AP ion sources compared with conventional bulk signal response measurements.

Analysis of tensides in complex samples with comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry.

Multidimensional gas-chromatographical analysis of various tensides of natural or synthetic origin in cosmetic products is demonstrated. Comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry allows the qualitative and quantitative determination of alkyl polyglucosides (AG), fatty alcohol ethoxylates (FAEO), fatty alcohol sulfates (FAS), fatty alcohol ether sulfates (FAES) and cocamidopropyl betaines (CAPB) in shower gel and cleaning agents. The samples were aliquoted in two parts. The first part was silylated, diluted and analysed; then, in order to detect anionic tensides (FAES, FAS) too, the second aliquot was hydrolysed before being silylated for analysis. Because of their amphoteric character, the betaines can only be analysed by gas chromatography after thermal decomposition in the injector, which leads to the corresponding amidoamines among other products.

Analysis of alkyl polyglucosides in industrial products by capillary electrophoresis with pulsed amperometric detection.

Pulsed amperometric detection following micellar electrokinetic chromatography has been applied successfully to the direct detection of alkyl polyglucosides (APGs) in shampoos and other industrial products without prior conversion to highly absorbing or fluorescing derivatives. For electrochemical detection, it is necessary to dissociate the hydroxyl groups of the APGs. Thus, we used 0.1 M NaOH in the outlet vial to dissociate the APGs. The main problems associated with the combination of electrochemical detection and capillary electrophoresis are the need to isolate the detector from the electric field used in the capillary electrophoresis separation and the difficulty of aligning the working electrode with the end of the capillary. To overcome these problems, a simple capillary-electrode holder was constructed. This holder automatically aligns the capillary and the electrode in a wall-jet configuration without the aid of micropositioners and facilitates the replacement of electrodes and capillaries without reconstruction of the entire capillary/electrode setup. Special microcylindrical gold electrodes have been produced by sealing 300-microm-diameter gold wire into borosilicate-glass capillaries.

A silica-based monolithic column in capillary HPLC and CEC coupled with ESI-MS or electrospray-atmospheric-pressure laser ionization-MS.

We describe the successful coupling of CEC and capillary HPLC with the recently developed atmospheric-pressure laser ionization (APLI) method. APLI is suitable for selectively and sensitively ionizing nonpolar aromatic compounds at ambient pressure for subsequent mass-selective detection. The polycyclic aromatic hydrocarbons used as analytes are first separated either by CEC on a silica-based monolithic column or by capillary HPLC. The eluent, along with a sheath flow, is volatilized by microelectrospray and then selectively ionized by excimer laser (KrF*) radiation via two-photon excitation. A QTOF-MS is used as mass-selective detector. This interface combination makes soft ionization of thermally labile nonpolar aromatic analytes possible.

Capillary electrophoresis-laser induced fluorescence analysis of endogenous damage in mitochondrial and genomic DNA.

Reactive oxygen molecules are formed in vivo as by-products of normal aerobic metabolism. All organisms dependent on oxygen are inevitably exposed to these species so that DNA damage can occur in both genomic and mitochondrial DNA (mtDNA). In order to determine endogenous DNA damage we have developed an analytical method that involves the isolation and hydrolysis of genomic DNA or mtDNA, the labeling of modified and unmodified nucleotides and micellar electrokinetic chromatography with laser-induced fluorescence detection. With this method we have found etheno-adenine, thymine glycol, uracil, hypoxanthine, and 5-methylcytosine. These were identified by the addition of internal standards to the genomic or mtDNA. There are a large number of other signals in the electropherograms of mtDNA that we have never found in genomic DNA analysis because they are at lower concentration in the genome. In the DNA of untreated patients with chronic lymphocytic leukemia (CLL), uracil and high levels of etheno-adenine were found, which can be explained by antioxidant enzyme alterations and oxidative stress in the CLL lymphocytes.