Clearance rates of sand-burrowed and laterally pressed unburrowed Pismo clam Tivela stultorum (Mawe 1823) in a laboratory open-flow system.

Pismo clam extraction is currently banned in Mexico to help the recovery of natural populations. Thus, the primary objective of this study was to gain insight on its basic biology and husbandry protocols. Growth and clearance rate (CR) of sand-burrowed and sediment-free, laterally pressed adult Pismo clams were quantified in the laboratory as a function of burrowing condition, flow, temperature, and microalgal concentration using open-flow chambers. After 40 days, clams remained healthy regardless of burrowing condition and showed a hyperbolic CR response pattern to increased flow, with CR directly proportional to flows lower than 1000 ml min-1. Maximal asymptotic CR values (300 to 400 ml min-1 org-1) were observed from 1000 to 2000 ml min-1. No significant CR differences were observed between burrowed and laterally pressed clams, yet microalgal concentration effects were detected, with constant maximal CRs of ∼250 ml min-1 in the range of 50 to 200 cells µl-1 and decline at higher concentrations. Maintenance protocols of laterally pressed organisms were validated in the laboratory with both weight and CR data. To our knowledge, this is the first study providing whole-body physiological data translated into effective husbandry protocols for Pismo clams. This approach represents a fresh perspective to traditional research areas, opening the possibility for continued experimentation under controlled conditions.

A monolithic stationary phase with dendritic nanostructures for the separation of PEGylated proteins.

Separation of PEGylated protein mixtures into individual species is a challenging procedure, and many efforts have been focused on creating novel chromatographic supports for this purpose. In this study, a new monolithic stationary phase with hyperbranched nanostructures was chemically synthesized. For this, monoliths with a support matrix of poly (glycidyl methacrylate-co-ethylene dimethacrylate) and ethylenediamine chemistry were modified with third-generation dendrons with butyl-end groups. The new monolith was analyzed by infrared spectroscopy, confirming the dendron with butyl ligands and exhibited low mass transfer resistance as observed by breakthrough frontal analysis. This support was able to separate mono-PEG ribonuclease A from the PEGylation mixture, indicated by a single band (∼30 kDa) in the electrophoretic analysis. Moreover, the separation of mono-PEGylated positional isomers was probably observed, as the protein with ∼30 kDa was found in two separate peaks. Interestingly, the dendronized monolith allowed the separation of the reaction mixture into individual PEGylated species when using high ammonium sulfate concentrations (2 M). A correlation between the PEGylation degree and the strength of the hydrophobic interactions on the monolith was observed. This chromatographic approach combines the natural branched architecture of dendrons and the higher capabilities of the monoliths enhancing the hydrophobic surface area, and therefore the interaction between the PEGylated proteins and ligands. Thus, the novel support represents a novel platform for the purification of PEGylated from non-PEGylated proteins with biotechnological applications.

Bone marrow aspiration in a patient with systemic microsporidium.

A 34-year-old female presented with several weeks of fever, fatigue, weight loss, abdominal pain and hemoptysis. PE revealed moderate pallor, RUQ pain, mild dyspnea, conjunctival injection and hepatomegaly. The CBC showed anemia, mild leukocytosis, hypoalbuminemia, hypertransaminasemia, presence of nucleated red blood cells. Microsporidium was found in BMA.

Recovery of Bioactive Ellagitannins by Ultrasound/Microwave-Assisted Extraction from Mexican Rambutan Peel (Nephelium lappaceum L.).

Rambutan (Nephelium lappaceum L.) is a tropical fruit from Asia which has become the main target of many studies involving polyphenolic analysis. Mexico produces over 8 million tons per year of rambutan, generating a huge amount of agro-industrial waste since only the pulp is used and the peel, which comprises around 45% of the fruit's weight, is left behind. This waste can later be used in the recovery of polyphenolic fractions. In this work, emerging technologies such as microwave, ultrasound, and the hybridization of both were tested in the extraction of phenolic compounds from Mexican rambutan peel. The results show that the hybrid technology extraction yielded the highest polyphenolic content (176.38 mg GAE/g of dry rambutan peel). The HPLC/MS/ESI analysis revealed three majoritarian compounds: geraniin, corilagin, and ellagic acid. These compounds explain the excellent results for the biological assays, namely antioxidant activity evaluated by the DPPH, ABTS, and LOI (Lipid oxidation inhibition) assays that exhibited great antioxidant capacity with IC50 values of 0.098, 0.335, and 0.034 mg/mL respectively, as well as prebiotic activity demonstrated by a µMax (maximum growth) of 0.203 for Lactobacillus paracasei. Lastly, these compounds have shown no hemolytic activity, opening the door for the elaboration of different products in the food, cosmetic, and pharmaceutical industries.

Electrokinetically Driven Exosome Separation and Concentration Using Dielectrophoretic-Enhanced PDMS-Based Microfluidics.

Exosomes are a specific subpopulation of extracellular vesicles that have gained interest because of their many potential biomedical applications. However, exosome isolation and characterization are the first steps toward designing novel applications. This work presents a direct current-insulator-based dielectrophoretic (DC-iDEP) approach to simultaneously capture and separate exosomes by size. To do so, a microdevice consisting of a channel with two electrically insulating post sections was designed. Each section was tailored to generate different nonuniform spatial distributions of the electric field and, therefore, different dielectrophoretic forces acting on exosomes suspended in solution. Side channels were placed adjacent to each section to allow sample recovery. By applying an electric potential difference of 2000 V across the length of the main channel, dielectrophoretic size-based separation of exosomes was observed in the device. Analysis of particle size in each recovered fraction served to assess exosome separation efficiency. These findings show that iDEP can represent a first step toward designing a high-throughput, fast, and robust microdevice capable of capturing and discriminating different subpopulations of exosomes based on their size.

Synthesis, characterization, and in vitro evaluation of gamma radiationinduced PEGylated isoniazid

Background: The search for innovative anti-tubercular agents has received increasing attention in tuberculosis chemotherapy because Mycobacterium tuberculosis infection has steadily increased over the years. This underlines the necessity for new methods of preparation for polymer-drug adducts to treat this important infectious disease. The use of poly(ethylene glycol)(PEG) is an alternative producing anti-tubercular derivatives. However, it is not yet known whether PEGylated isonicotinylhydrazide conjugates obtained by direct links with PEG are useful for therapeutic applications. Results: Here, we synthesized a PEGylated isoniazid (PEG-g-INH or PEG­INH) by gamma radiation-induced polymerization, for the first time. The new prodrugs were characterized using Raman and UV/Vis spectrometry. The mechanism of PEGylated INH synthesis was proposed. The in vitro evaluation of a PEGylated isonicotinylhydrazide macromolecular prodrug was also carried out. The results indicated that PEG­INH inhibited the bacterial growth above 95% as compared with INH, which showed a lower value (80%) at a concentration of 0.25 µM. Similar trends are observed for 0.1, 1, and 5 µM. Conclusions: In summary, the research suggests that it is possible to covalently attach the PEG onto INH by the proposed method and to obtain a slow-acting isoniazid derivative with little toxicity in vitro and higher antimycobacterial potency than the neat drug.

Survival and prognostic factors in non-small cell lung cancer patients with mutation of the EGFR gene treated with tyrosine kinase inhibitors in a peruvian hospital.

The identification of the epidermal growth factor mutation (EGFR) is a positive prognostic factor for survival and therapeutic response to tyrosine kinase inhibitors (TKIs) in patients with non-small cell lung cancer (NSCLC). TKIs are considered first line treatment in Patients with stages IIIB and IV NSCLC. We investigated the survival and prognostic factors in NSCLC patients with the mutation of the EGFR in routine clinical practice. We conducted a retrospective cohort observational study of 72 patients with non-small cell lung cancer (NSCLC) with EGFR gene mutations that received treatment with erlotinib from January 2009 to December 2015. Kaplan-Meier curves were presented. The association between independent variables and survival was analyzed using the Long-Rank test in bivariate analysis and for multivariate analysis, Cox proportional hazards method was used to calculate hazard ratios (HRs) and corresponding 95% confidence intervals (CIs). We included data from 72 patients, which were followed for a total of 1144 patient-months. The majority of patients were female (61.11%), non-smokers (62.50%), and with histological type corresponding to adenocarcinoma (76.38%). The most frequent EGFR gene mutation was the deletion of exon 19 (65.27%). The majority of patients presented with comorbidities (77.78%), most commonly hypertension. Almost all patients had stage IV NSCLC. Out of the 72 cases, 65 (90.28%) died. The median survival was 9.3 months (95% CI, 7.01-16.93). When comparing the survival curves when using the Log Rank Test, histological type (P = 0.01), place of mutation (P = 0.06), hemoglobin (P = 0.01) and age (P = 0.01) were significant associated to overall survival (OS). In multivariate analysis, only age (HR, 1.02; 95% CI, 1-1.04, P = 0.009) and hemoglobin (HR, 0.70; 95% CI, 0.55-0.89, P = 0.003) remained significant. In conclusion, the median OS of NSCLC patients with positive EGFR gene mutation treated with TKI was 9.3 months. Bivariate and multivariate analysis showed that younger age and a higher hemoglobin level were the most important factors associated with survival.

Modelling of electrokinetic phenomena for capture of PEGylated ribonuclease A in a microdevice with insulating structures.

Synthesis of PEGylated proteins results in a mixture of protein-polyethylene glycol (PEG) conjugates and the unreacted native protein. From a ribonuclease A (RNase A) PEGylation reaction, mono-PEGylated RNase A (mono-PEG RNase A) has proven therapeutic effects against cancer, reason for which there is an interest in isolating it from the rest of the reaction products. Experimental trapping of PEGylated RNase A inside an electrokinetically driven microfluidic device has been previously demonstrated. Now, from a theoretical point of view, we have studied the electrokinetic phenomena involved in the dielectrophoretic streaming of the native RNase A protein and the trapping of the mono-PEG RNase A inside a microfluidic channel. To accomplish this, we used two 3D computational models, a sphere and an ellipse, adapted to each protein. The effect of temperature on parameters related to trapping was also studied. A temperature increase showed to rise the electric and thermal conductivities of the suspending solution, hindering dielectrophoretic trapping. In contrast, the dynamic viscosity of the suspending solution decreased as the temperature rose, favoring the dielectrophoretic manipulation of the proteins. Also, our models were able to predict the magnitude and direction of the velocity of both proteins indicating trapping for the PEGylated conjugate or no trapping for the native protein. In addition, a parametric sweep study revealed the effect of the protein zeta potential on the electrokinetic response of the protein. We believe this work will serve as a tool to improve the design of electrokinetically driven microfluidic channels for the separation and recovery of PEGylated proteins in one single step.

Synthesis of adsorbents with dendronic structures for protein hydrophobic interaction chromatography.

Here, we introduced a new technology based on the incorporation of dendrons-branched chemical structures-onto supports for synthesis of HIC adsorbents. In doing so we studied the synthesis and performance of these novel HIC dendron-based adsorbents. The adsorbents were synthesized in a facile two-step reaction. First, Sepharose 4FF (R) was chemically modified with polyester dendrons of different branching degrees i.e. third (G3) or fifth (G5) generations. Then, butyl-end valeric acid ligands were coupled to dendrons via ester bond formation. UV-vis spectrophotometry and FTIR analyses of the modified resins confirmed the presence of the dendrons and their ligands on them. Inclusion of dendrons allowed the increment of ligand density, 82.5 ± 11 and 175.6 ± 5.7 µmol ligand/mL resin for RG3 and RG5, respectively. Static adsorption capacity of modified resins was found to be ∼ 60 mg BSA/mL resin. Interestingly, dynamic binding capacity was higher at high flow rates, 62.5 ± 0.8 and 58.0 ± 0.5mg/mL for RG3 and RG5, respectively. RG3 was able to separate lipase, ß-lactoglobulin and α-chymotrypsin selectively as well as fractionating of a whole proteome from yeast. This innovative technology will improve the existing HIC resin synthesis methods. It will also allow the reduction of the amount of adsorbent used in a chromatographic procedure and thus permit the use of smaller columns resulting in faster processes. Furthermore, this method could potentially be considered as a green technology since both, dendrons and ligands, are formed by ester bonds that are more biodegradable allowing the disposal of used resin waste in a more ecofriendly manner when compared to other exiting resins.

Dielectrophoretic behavior of PEGylated RNase A inside a microchannel with diamond-shaped insulating posts.

Ribonuclease A (RNase A) has proven potential as a therapeutic agent, especially in its PEGylated form. Grafting of PEG molecules to this protein yields mono-PEGylated (mono-PEG) and di-PEGylated (di-PEG) RNase A conjugates, and the unreacted protein. Mono-PEG RNase A is of great interest. The use of electrokinetic forces in microdevices represents a novel alternative to chromatographic methods to separate this specie. This work describes the dielectrophoretic behavior of the main protein products of the RNase A PEGylation inside a microchannel with insulators under direct current electric fields. This approach represents the first step in route to design micro-bioprocesses to separate PEGylated RNase A from unreacted native protein. The three proteins exhibited different dielectrophoretic behaviors. All of them experienced a marked streaming pattern at 3000 V consistent with positive dielectrophoresis. Native protein was not captured at any of the conditions tested, while mono-PEG RNase A and di-PEG RNase A were captured presumably due to positive dielectrophoresis at 4000 and 2500 V, respectively. Concentration of mono-PEG RNase A with a maximal enrichment efficiency of ≈9.6 times the feed concentration was achieved in few seconds. These findings open the possibility of designing novel devices for rapid separation, concentration, and recovery of PEGylated RNase A in a one-step operation.

A novel pectin-degrading enzyme complex from Aspergillus sojae ATCC 20235 mutants.

BACKGROUND: In the food industry, the use of pectinase preparations with high pectin esterase (PE) activity leads to the release of methanol, which is strictly regulated in food products. Herein, a pectin-degrading enzyme (PDE) complex exhibiting low PE activity of three Aspergillus sojae ATCC 20235 mutants (M3, DH56 and Guserbiot 2.230) was investigated. Production of exo-/endo-polygalacturonase (PG), exo-polymethylgalacturonase (PMG) and pectin lyase (PL) by mutant M3 and A. sojae using two different carbon sources was evaluated in solid-state fermentation. Finally, experimental preparations obtained from the mutants and commercial pectinases standardized to the same potency were screened for PDEs. RESULTS: Mutant M3 grown on sugar beet was found to be the best producer of exo-PG, endo-PG, exo-PMG and PL, with maximum yields of 1111, 449, 130 and 123 U g(-1), respectively. All experimental preparations exhibited low PE activity, at least 21.5 times less than commercial pectinases, and higher endo-PG (40 U mL(-1)). CONCLUSION: Mutant M3 was the best PDE producer using sugar beet. Mutant strains presented a PDE complex featuring high endo-PG and very low PE activities. This novel complex with low de-esterifying activity can be exploited in the food industry to degrade pectin without releasing methanol.

Lysine-directed staining of proteins for MS-based analyses.

Visualization of proteins and MS-based analyses are elemental tasks in modern biochemistry. Nevertheless, reports about covalent protein dyes and their suitability for subsequent MS experiments remain scarce. In a recent work, we demonstrated that covalent prestaining of proteins with Uniblue A drastically speeds up proteomic workflows. The present study introduces dabsyl chloride as another truly MS-compatible protein stain. Remarkably, although Uniblue A and dabsyl chloride employ different nucleophilic reaction mechanisms, both are highly specific for lysine residues. The predictable peptide modifications allow easy integration into state-of-the-art bioinformatic workflows. Further, lysine-directed derivatizations with hydrophobic reagents such as dabsyl chloride complement the cysteine-directed ALiPHAT strategy for increasing the sensitivity of peptide identifications.

Accelerated identification of proteins by mass spectrometry by employing covalent pre-gel staining with Uniblue A.

BACKGROUND: The identification of proteins by mass spectrometry is a standard method in biopharmaceutical quality control and biochemical research. Prior to identification by mass spectrometry, proteins are usually pre-separated by electrophoresis. However, current protein staining and de-staining protocols are tedious and time consuming, and therefore prolong the sample preparation time for mass spectrometry. METHODOLOGY AND PRINCIPAL FINDINGS: We developed a 1-minute covalent pre-gel staining protocol for proteins, which does not require de-staining before the mass spectrometry analysis. We investigated the electrophoretic properties of derivatized proteins and peptides and studied their behavior in mass spectrometry. Further, we elucidated the preferred reaction of proteins with Uniblue A and demonstrate the integration of the peptide derivatization into typical informatics tools. CONCLUSIONS AND SIGNIFICANCE: The Uniblue A staining method drastically speeds up the sample preparation for the mass spectrometry based identification of proteins. The application of this chemo-proteomic strategy will be advantageous for routine quality control of proteins and for time-critical tasks in protein analysis.

Catalytic and thermodynamic properties of a tannase produced by Aspergillus niger GH1 grown on polyurethane foam.

Tannase is an inducible enzyme with important applications in the food and pharmaceutical industries. This enzyme was produced by the fungus Aspergillus niger GH1 under solid-state fermentation using polyurethane foam as solid support and tannic acid as sole carbon source and tannase inducer. Physicochemical properties of A. niger tannase were characterized, and the kinetic and thermodynamics parameters on methyl gallate hydrolysis were evaluated. The enzyme was stable in a pH range of 2-8 and a functional temperature range of 25-65 °C. The highest k(cat) value was 2,611.10 s(-1) at 65 °C. Tannase had more affinity for methyl gallate at 45 °C with a K(M) value of 1.82 mM and an efficiency of hydrolysis (k(cat)/K(M)) of 330.01 s(-1) mM(-1). The lowest E(a) value was found to be 21.38 kJ/mol at 4.4 mM of methyl gallate. The lowest free energy of Gibbs (ΔG) and enthalpy (ΔH) were found to be 64.86 and 18.56 kJ/mol, respectively. Entropy (ΔS) was -0.22 kJ/mol K. Results suggest that the A. niger GH1 tannase is an attractive enzyme for industrial applications due its catalytic and thermodynamical properties.