Applying new approach methodologies to assess next-generation tobacco and nicotine products.

In vitro toxicology research has accelerated with the use of in silico, computational approaches and human in vitro tissue systems, facilitating major improvements evaluating the safety and health risks of novel consumer products. Innovation in molecular and cellular biology has shifted testing paradigms, with less reliance on low-throughput animal data and greater use of medium- and high-throughput in vitro cellular screening approaches. These new approach methodologies (NAMs) are being implemented in other industry sectors for chemical testing, screening candidate drugs and prototype consumer products, driven by the need for reliable, human-relevant approaches. Routine toxicological methods are largely unchanged since development over 50 years ago, using high-doses and often employing in vivo testing. Several disadvantages are encountered conducting or extrapolating data from animal studies due to differences in metabolism or exposure. The last decade saw considerable advancement in the development of in vitro tools and capabilities, and the challenges of the next decade will be integrating these platforms into applied product testing and acceptance by regulatory bodies. Governmental and validation agencies have launched and applied frameworks and "roadmaps" to support agile validation and acceptance of NAMs. Next-generation tobacco and nicotine products (NGPs) have the potential to offer reduced risks to smokers compared to cigarettes. These include heated tobacco products (HTPs) that heat but do not burn tobacco; vapor products also termed electronic nicotine delivery systems (ENDS), that heat an e-liquid to produce an inhalable aerosol; oral smokeless tobacco products (e.g., Swedish-style snus) and tobacco-free oral nicotine pouches. With the increased availability of NGPs and the requirement of scientific studies to support regulatory approval, NAMs approaches can supplement the assessment of NGPs. This review explores how NAMs can be applied to assess NGPs, highlighting key considerations, including the use of appropriate in vitro model systems, deploying screening approaches for hazard identification, and the importance of test article characterization. The importance and opportunity for fit-for-purpose testing and method standardization are discussed, highlighting the value of industry and cross-industry collaborations. Supporting the development of methods that are accepted by regulatory bodies could lead to the implementation of NAMs for tobacco and nicotine NGP testing.

Comparative toxicological assessment of cigarettes and new category products via an in vitro multiplex proteomics platform.

Cigarette smoking is a risk factor for several diseases such as cancer, cardiovascular disease (CVD), and chronic obstructive pulmonary diseases (COPD), however, the underlying mechanisms are not fully understood. Alternative nicotine products with reduced risk potential (RRPs) including tobacco heating products (THPs), and e-cigarettes have recently emerged as viable alternatives to cigarettes that may contribute to the overall strategy of tobacco harm reduction due to the significantly lower levels of toxicants in these products' emissions as compared to cigarette smoke. Assessing the effects of RRPs on biological responses is important to demonstrate the potential value of RRPs towards tobacco harm reduction. Here, we evaluated the inflammatory and signaling responses of human lung epithelial cells to aqueous aerosol extracts (AqE) generated from the 1R6F reference cigarette, the glo™ THP, and the Vype ePen 3.0 e-cigarette using multiplex analysis of 37 inflammatory and phosphoprotein markers. Cellular exposure to the different RRPs and 1R6F AqEs resulted in distinct response profiles with 1R6F being the most biologically active followed by glo™ and ePen 3.0. 1R6F activated stress-related and pro-survival markers c-JUN, CREB1, p38 MAPK and MEK1 and led to the release of IL-1α. glo™ activated MEK1 and decreased IL-1ß levels, whilst ePen 3.0 affected IL-1ß levels but had no effect on the signaling activity compared to untreated cells. Our results demonstrated the reduced biological effect of RRPs and suggest that targeted analysis of inflammatory and cell signaling mediators is a valuable tool for the routine assessment of RRPs.

Advances in whole aerosol approaches for in vitro e-cigarette testing.

Electronic-cigarette regulation and risk assessment is a prominent and developing field, as the popularity and prevalence of this product category increases. Over the last 10 years since their emergence, there have been many advances and adaptations to current in vitro testing techniques to better assess and predict absolute consumer risk. However, there are still requirements to create a cross-field harmonised approach to appropriate exposure and experimental design. With many assessments still being carried out using methods developed and optimised for cigarette smoke, there must first be an acknowledgement regarding the differences between cigarette smoke and tobacco-free e-cigarette aerosols before we can accurately assess these distinct products. Here, we discuss five published studies from within our own research to demonstrate how in vitro testing techniques have evolved to improve determination of risk by considering appropriate dosimetry and exposure for both e-cigarette and cigarette aerosols and how we can contextualise the data through human consumption and dose extrapolation, ultimately giving more relevance to in vitro data. Furthermore, we have demonstrated the evolution of techniques, which has allowed us to bridge between platforms, simplify exposure set-up, experimental design and demonstrate technology evolution within our products, thus fulfilling a responsible duty of care to consumers via an appropriate and robust in vitro product assessment.

Key Challenges and Recommendations for In Vitro Testing of Tobacco Products for Regulatory Applications: Consideration of Test Materials and Exposure Parameters.

The Institute for In Vitro Sciences (IIVS) is sponsoring a series of workshops to identify, discuss and develop recommendations for optimal scientific and technical approaches for conducting in vitro assays, to assess potential toxicity within and across tobacco and various next generation nicotine and tobacco products (NGPs), including heated tobacco products (HTPs) and electronic nicotine delivery systems (ENDS). The third workshop (24-26 February 2020) summarised the key challenges and made recommendations concerning appropriate methods of test article generation and cell exposure from combustible cigarettes, HTPs and ENDS. Expert speakers provided their research, perspectives and recommendations for the three basic types of tobacco-related test articles: i) pad-collected material (PCM); ii) gas vapour phase (GVP); and iii) whole smoke/aerosol. These three types of samples can be tested individually, or the PCM and GVP can be combined. Whole smoke/aerosol can be bubbled through media or applied directly to cells at the air-liquid interface. Summaries of the speaker presentations and the recommendations developed by the workgroup are presented. Following discussion, the workshop concluded the following: that there needs to be greater standardisation in aerosol generation and collection processes; that methods for testing the NGPs need to be developed and/or optimised, since simply mirroring cigarette smoke testing approaches may be insufficient; that understanding and quantitating the applied dose is fundamental to the interpretation of data and conclusions from each study; and that whole smoke/aerosol approaches must be contextualised with regard to key information, including appropriate experimental controls, environmental conditioning, analytical monitoring, verification and performance criteria.

Bridging: Accelerating Regulatory Acceptance of Reduced-Risk Tobacco and Nicotine Products.

INTRODUCTION: The number and variety of alternative tobacco and nicotine products that can potentially provide reduced-risk choices for cigarette smokers who switch completely to such products instead of continued smoking have grown substantially in the past decade. Innovation and choice are likely to improve the prospects of smokers making the switch, but this provides challenges to regulators and manufacturers to ensure that changes to regulations and products promote and do not hinder contributions to tobacco harm reduction. AIMS AND METHODS: This paper looks at where bridging data sets for tobacco heating products, closed system vaping products, and oral nicotine products might enable innovation while protecting the interests of consumers. RESULTS: We review product data from chemical studies and a toxicological study showing how bridging can be applied and consider what product development changes might allow bridging from existing datasets or trigger the need for new ones. CONCLUSIONS: Bridging across specific product ranges can increase the speed of innovation, foster competition, and limit the burden of assessment for regulators while maintaining product safety and quality. IMPLICATIONS: Bridging partial data sets is an established practice within other industries, that aims to improve efficiency with regulatory approvals, accepts natural product variation, and supports product innovation. We review product data from chemical studies and a toxicological study showing how bridging can be applied and consider what product development changes might allow bridging from existing datasets or trigger the need for new ones. This in turn can increase the speed of innovation, foster competition, and limit the burden of assessment for regulators while maintaining product safety and quality.

Application of ToxTracker for the toxicological assessment of tobacco and nicotine delivery products.

Consumer demands and innovation have led to an increasingly diverse range of nicotine delivery systems, driven by a desire to reduce risk associated with traditional combustible cigarettes. This speed of change provides a mandate for rapid new product assessment. We have used the validated technology ToxTracker®, to assess biomarkers of DNA damage, protein misfolding, oxidative and cellular stress, across the categories of cigarette (1R6F), tobacco heating product (THP 1.4) and electronic cigarette (ePen 3). In addition, we compared the commonly used test matrices for tobacco and nicotine products; whole aerosol aqueous extracts (AqE) and gas vapour phase (GVP), determining their suitability across the product categories. We demonstrated a significant reduction in oxidative stress and cytotoxicity for THP 1.4 over cigarette, further reduced for ePen 3, when assessed by both dilution and nicotine dosimetry. We also identified that while the extraction matrices AqE and GVP from combustible products were equivalent in the induced responses, this was not true of the other category examples, moreover THP 1.4 GVP demonstrates a >50 % reduction in both toxicity and cytotoxicity endpoints over AqE. This indicates that unlike cigarette, the active components or toxicants for THP and electronic cigarette are associated with the aerosol fraction of these categories.

The development of an in vitro 3D model of goblet cell hyperplasia using MUC5AC expression and repeated whole aerosol exposures.

Goblet cell hyperplasia and overproduction of airway mucin are characteristic features of the lung epithelium of smokers and COPD patients. Tobacco heating products (THPs) are a potentially less risky alternative to combustible cigarettes, and through continued use solus THPs may reduce smoking-related disease risk. Using the MucilAir™ in vitro lung model, a 6-week feasibility study was conducted investigating the effect of repeated cigarette smoke (1R6F), THP aerosol and air exposure. Tissues were exposed to nicotine-matched whole aerosol doses 3 times/week. Endpoints assessed were dosimetry, tight-junction integrity, cilia beat frequency (CBF) and active area (AA), cytokine secretion and airway mucin MUC5AC expression. Comparison of incubator and air exposed controls indicated exposures did not have a significant effect on the transepithelial electrical resistance (TEER), CBF and AA of the tissues. Cytokine secretion indicated clear differences in secretion patterns in response to 1R6F and THP exposure. 1R6F exposure resulted in a significant decrease in the TEER and AA (p=0.000 and p=0.000, respectively), and an increase in MUC5AC positive cells (p=0.002). Repeated THP exposure did not result in a significant change in MUC5AC positive cells. This study demonstrates repeated cigarette smoke whole aerosol exposure can induce these morphological changes in vitro.

Application of text mining to develop AOP-based mucus hypersecretion genesets and confirmation with in vitro and clinical samples.

Mucus hypersecretion contributes to lung function impairment observed in COPD (chronic obstructive pulmonary disease), a tobacco smoking-related disease. A detailed mucus hypersecretion adverse outcome pathway (AOP) has been constructed from literature reviews, experimental and clinical data, mapping key events (KEs) across biological organisational hierarchy leading to an adverse outcome. AOPs can guide the development of biomarkers that are potentially predictive of diseases and support the assessment frameworks of nicotine products including electronic cigarettes. Here, we describe a method employing manual literature curation supported by a focused automated text mining approach to identify genes involved in 5 KEs contributing to decreased lung function observed in tobacco-related COPD. KE genesets were subsequently confirmed by unsupervised clustering against 3 different transcriptomic datasets including (1) in vitro acute cigarette smoke and e-cigarette aerosol exposure, (2) in vitro repeated incubation with IL-13, and (3) lung biopsies from COPD and healthy patients. The 5 KE genesets were demonstrated to be predictive of cigarette smoke exposure and mucus hypersecretion in vitro, and less conclusively predict the COPD status of lung biopsies. In conclusion, using a focused automated text mining and curation approach with experimental and clinical data supports the development of risk assessment strategies utilising AOPs.

Optimization of aqueous aerosol extract (AqE) generation from e-cigarettes and tobacco heating products for in vitro cytotoxicity testing.

Electronic cigarettes (e-cigarettes) and tobacco heating products (THPs) have reduced yields of toxicants and have recently emerged as a potentially safer alternative to combustible cigarettes. To understand if reduced toxicant exposure is associated with reductions in biological responses, there is a need for high-quality pre-clinical in vitro studies. Here, we investigated the cytotoxic response of human umbilical vein endothelial cells to conventional cigarette aqueous aerosol extracts (AqE) and highly concentrated AqEs from e-cigarettes (two generations of atomisers) and THPs (two variants). All AqE samples were generated by a standardized methodology and characterized for nicotine, propylene glycol and vegetable glycerol. The cigarette AqE caused a maximum 100 ± 0.00 % reduction in cell viability at 35 % dose (2.80 puffs) as opposed to 96.63 ± 2.73 % at 50 % (20 puffs) and 99.85 ± 0.23 % at 75 % (30 puffs) for the two THP variants (glo Bright Tobacco, glo Rich Tobacco), and 99.07 ± 1.61 % at the neat ePen2.0 e-cigarette (200 puffs). The AqE of the remaining e-cigarettes either resulted in an incomplete dose-response or did not elicit any response. The methods utilized were suitably sensitive to not only differentiate between cigarette, THP and e-cigarette aerosols but also to distinguish between products within each product category.

In vitro biological assessment of the stability of cigarette smoke aqueous aerosol extracts.

OBJECTIVES: Cigarette smoke aqueous aerosol extracts (AqE) have been used for assessing tobacco products, particularly with in vitro models such as oxidative stress and inflammation. These test articles can be generated easily, but there are no standardised methods for the generation and characterisation or stability. We investigated the effects of pro-oxidant smoke-derived chemicals by using 3R4F AqE generated under standardised conditioning and smoking regimes and assessed the stability over 31-week timeframe. Twenty batches generated from ten puffs per cigarette bubbled through 20 ml cell culture media were used fresh and thawed from frozen aliquots stored at - 80 ºC. RESULTS: Nicotine levels quantified by gas chromatography/mass spectrometry and optical density at 260 nm showed chemical and physical stability from week 0 (fresh sample) to weeks 1, 4, 8 and 31 (frozen samples). No significant change in H292 human bronchial epithelial cell viability or oxidative stress were observed between fresh AqE at week 0 and frozen AqE at 31 weeks. AqEs generated by our protocol were stable for up to 31 weeks for all tested end points, suggesting that it may not be necessary to use freshly generated AqE for each study, thus reducing batch-to-batch variability.

The genotoxicological assessment of a tobacco heating product relative to cigarette smoke using the in vitro micronucleus assay.

In vitro studies have supported the toxicological evaluation of chemicals and complex mixtures including cigarette smoke and novel tobacco and nicotine products which include tobacco heating products (THP). This new environment requires faster testing, higher throughput and appropriate in vitro studies, to support product innovation and development. In this study, total particulate matter (TPM) from a commercially available THP and a reference cigarette (3R4F) were assessed up to 500 µg/mL using two in vitro micronucleus techniques. V79 and TK6 cells were assessed using conventional OECD 487 manual scoring techniques, whereas, CHO cells were assessed using contemporary, automated high content screening approaches (Cellomics ArrayScan® VTI). V79 cells gave the most consistent response with all three treatment conditions producing a clear positive genotoxic response. Human TK6 cells only produced dose-dependent response, indicative of a weak-positive response. CHO cells demonstrated a positive response with TPM using long (24 h) -S9 conditions. All three cell lines equally demonstrated a negative response with THP TPM up to 500 µg/mL. In conclusion, THP TPM did not increase micronuclei formation above control levels even at doses far exceeding that tested with reference cigarette smoke, in most cases up to 10x the dose delivered compared to that of cigarette smoke. This study supports the growing belief that THPs are less risky than conventional cigarettes and that 21st century screening techniques can be employed to support product design and decision making, as a potential 1st screen prior to more traditional assessments.

Evaluation of a high-throughput in vitro endothelial cell migration assay for the assessment of nicotine and tobacco delivery products.

Endothelial cell migration is a critical process in the maintenance of healthy blood vessels. Impaired endothelial migration is reportedly associated with the development of cardiovascular diseases. Here, we report on the development of a 96-well in vitro endothelial migration assay for the purpose of comparative toxicological assessment of a novel THP relative to cigarette smoke, to be able to rapidly inform regulatory decision making. Uniform scratches were induced in confluent human umbilical vein endothelial cells using the 96-pin wound maker and exposed to 3R4F cigarette or THP aqueous extracts (AqE). Endothelial migration was recorded over 24 h, and the rate of wound closure calculated using mean relative wound density rather than migration rate as previously reported. This self-normalising parameter accounts for starting wound size, by comparing the density of the scratch to the outer region at each time-point. Furthermore, wound width acceptance criteria was defined to further increase the sensitivity of the assay. 3R4F and THP AqE samples were tested at comparable nicotine concentrations. 3R4F showed significant cytotoxicity and inhibition of wound healing whereas THP AqE did not show any response in either endpoint. This 96-well endothelial migration assay was suitably sensitive to distinguish combustible cigarette and THP test articles.

An inter-laboratory in vitro assessment of cigarettes and next generation nicotine delivery products.

In vitro testing can facilitate the rapid assessment of next generation nicotine delivery products (NGPs) with comparisons to combustible tobacco products. In vitro assays for cytotoxicity and oxidative stress were employed at BAT (UK) and JT (Japan) to test total particulate matter (TPM) of a scientific reference cigarette and aerosol collected mass (ACM) of a commercially available E-cigarette and two tobacco heating products (THP). 3R4F TPMs were generated using the Health Canada intense (HCI) regimen, a modified regime (mHCI) for the THP ACMs and the CORESTA recommended method no. 81 for the E-cigarette ACM. Human lung cells were exposed to the test product TPM/ACMs at concentrations between 0-200 µg/ml followed by the employment of commercially available assays for endpoint analysis that included reactive oxygen species (ROS) generation, the glutathione ratio (GSH:GSSG), activation of the antioxidant response elements (ARE) and cellular viability. TPM/ACM nicotine concentrations were quantified using a UPLC-PDA technique. At both laboratories the 3R4F TPM induced significant and dose-dependent responses in all in vitro assays, whereas no significant responses could be measured for the NGP ACMs. In conclusion, both laboratories obtained comparable results across all endpoints therefore demonstrating the utility of the in vitro techniques combined with standardised test products to support the assessment of NGPs.

Genotoxicity evaluation of tobacco and nicotine delivery products: Part Two. In vitro micronucleus assay.

In this study, a variety of test matrices from tobacco and nicotine delivery products were assessed against a 3R4F Kentucky reference cigarette using the in vitro micronucleus assay. Testing was conducted using two Chinese hamster cell lines (CHO and V79), and a human lymphoblastoid cell line (TK6), in accordance with established guidelines. Total particulate matter (TPM) from a 3R4F Reference cigarette was compared to an electronic cigarette e-liquid, electronic cigarette TPM and TPM from a commercial tobacco heating product using a standard and an extended treatment condition with recovery period. Cells were assessed with 3R4F TPM prior to assessment of the other tobacco and nicotine product test matrices. These cell lines gave varied responses to 3R4F TPM with the most robust response using V79 cells. The use of an extended exposure/recovery period was seen to increase assay sensitivity for CHO and V79 cell lines but was less clear for TK6 cells. Negative responses were observed for all products except 3R4F across all treatment conditions in V79 cells. The most potent response to cigarette smoke was following extended treatment with recovery, suggesting this may be a more appropriate treatment for the future assessment of tobacco and nicotine product test matrices.

Genotoxicity evaluation of tobacco and nicotine delivery products: Part One. Mouse lymphoma assay.

Conduct of the mouse lymphoma assay (MLA) is underpinned by Organisation for Economic Co-operation and Development (OECD) Test Guideline 490 and International Conference on Harmonisation S2(R1) guidance and is a recognised in vitro genotoxicity test battery assay. It has been used on a limited number of occasions for the assessment of some tobacco and nicotine products, such as e-cigarettes and tobacco heating products (THP). The aim of this study was to assess the suitability of the MLA for genotoxicity testing with a variety of tobacco and nicotine products. Total particulate matter (TPM) from a 3R4F cigarette was compared against a commercial electronic cigarette liquid (e-liquid), electronic cigarette (e-cigarette) aerosol matter captured from the same e-liquid, and TPM from a commercial THP. Treatment conditions included 3 h exposures with and without metabolic activation and a longer 24 h exposure without metabolic activation (-S9) at concentrations up to 500 µg/mL. Under all treatment conditions, 3R4F produced a clear positive response with regard to induction of mutation. In contrast, no marked induction of mutation was observed for the e-liquid, e-cigarette aerosol or THP. Additionally, data are presented as a function of nicotine equivalents for comparisons between these different tobacco products and test matrices.

Assessment of enamel discoloration in vitro following exposure to cigarette smoke and emissions from novel vapor and tobacco heating products.

PURPOSE: To evaluate in vitro enamel sample discoloration following exposure to a scientific reference cigarette (3R4F) or emissions from next generation tobacco and nicotine products (NGPs) such as electronic cigarettes (EC) and tobacco heating products (THP). METHODS: Bovine enamel blocks (6.5 × 6.5 mm) were prepared and pre-incubated with human or artificial saliva, to form a pellicle layer before exposure to either particulate matter (PM) or whole aerosols. PM was prepared by capturing 3R4F cigarette smoke (CS), a commercial THP (THP1.0) or a novel vapor product (NVP)/next generation e-cigarette aerosols on Cambridge filter pads followed by elution with dimethyl sulfoxide (DMSO). Ten enamel samples were exposed to each PM for 14 days. For aerosol exposure, 12 enamel samples were exposed (200 puffs per day, for 5 consecutive days) to 3R4F CS or THP1.0 and NVP aerosols. Control samples were incubated with DMSO (PM study) or phosphate buffered saline (PBS, aerosol study). Individual enamel sample color readings (L*, a*, b*) were measured at baseline and on each exposure day. Mean ΔL*, Δa*, Δb* and ΔE values were calculated for each product or control. A one-way ANOVA was used to assess the differences between the products and controls. The Tukey procedure for pairwise comparisons was also used. RESULTS: At all timepoints, 3R4F PM and CS induced enamel discoloration that was statistically significant (< 0.0001) when compared to THP1.0 or NVP. After 14-day PM exposure, mean ΔE values were 29.4± 3.6, 10.5 ± 2.3, 10.7 ± 2.6 and 12.6 ± 2.0 for 3R4F, THP1.0, NVP and DMSO control respectively. After 5-day CS or aerosol exposure, mean ΔE values were 26.2 ± 3.2, 3.6 ± 1.9, 3.4 ± 1.3, 5.3 ± 0.8 for 3R4F CS, THP1.0, NVP or PBS control, respectively. Both exposure methods demonstrated that THP1.0 and NVP induced minimal staining, mean ΔL* , Δa* , Δb* and ΔE values were comparable to DMSO or PBS controls. CLINICAL SIGNIFICANCE: For the first time, diverse NGPs across the risk continuum were assessed in vitro for their impact on enamel staining. CS exposure significantly increased the level of bovine enamel sample discoloration, whereas THP1.0 or NVP exposure resulted in values comparable to the controls.

Pathway-based predictive approaches for non-animal assessment of acute inhalation toxicity.

New approaches are needed to assess the effects of inhaled substances on human health. These approaches will be based on mechanisms of toxicity, an understanding of dosimetry, and the use of in silico modeling and in vitro test methods. In order to accelerate wider implementation of such approaches, development of adverse outcome pathways (AOPs) can help identify and address gaps in our understanding of relevant parameters for model input and mechanisms, and optimize non-animal approaches that can be used to investigate key events of toxicity. This paper describes the AOPs and the toolbox of in vitro and in silico models that can be used to assess the key events leading to toxicity following inhalation exposure. Because the optimal testing strategy will vary depending on the substance of interest, here we present a decision tree approach to identify an appropriate non-animal integrated testing strategy that incorporates consideration of a substance's physicochemical properties, relevant mechanisms of toxicity, and available in silico models and in vitro test methods. This decision tree can facilitate standardization of the testing approaches. Case study examples are presented to provide a basis for proof-of-concept testing to illustrate the utility of non-animal approaches to inform hazard identification and risk assessment of humans exposed to inhaled substances.

Characterisation of the borgwaldt LM4E system for in vitro exposures to undiluted aerosols from next generation tobacco and nicotine products (NGPs).

Traditional in vitro exposure to combustible tobacco products utilise exposure systems that include the use of smoking machines to generate, dilute and deliver smoke to in vitro cell cultures. With reported lower emissions from next generation tobacco and nicotine products (NGPs), including e-cigarettes and tobacco heating products (THPs), diluting the aerosol is potentially not required. Herein we present a simplified exposure scenario to undiluted NGP aerosols, using a new puffing system called the LM4E. Nicotine delivery from an e-cigarette was used as a dosimetry marker, and was measured at source across 4 LM4E ports and in the exposure chamber. Cell viability studies, using Neutral Red Uptake (NRU) assay, were performed using H292 human lung epithelial cells, testing undiluted aerosols from an e-cigarette and a THP. E-cigarette mean nicotine generated at source was measured at 0.084 ±â€¯0.005 mg/puff with no significant differences in delivery across the 4 different ports, p = 0.268 (n = 10/port). Mean nicotine delivery from the e-cigarette to the in vitro exposure chamber (measured up to 100 puffs) was 0.046 ±â€¯0.006 mg/puff, p = 0.061. Aerosol penetration within the LM4E was 55% from source to chamber. H292 cells were exposed to undiluted e-cigarette aerosol for 2 h (240 puffs) or undiluted THP aerosol for 1 h (120 puffs). There were positive correlations between puff number and nicotine in the exposed culture media, R2 = 0.764 for the e-cigarette and R2 = 0.970 for the THP. NRU determined cell viability for e-cigarettes after 2 h' exposure resulted in 21.5 ±â€¯17.0% cell survival, however for the THP, full cytotoxicity was reached after 1-h exposure.

In vitro RNA-seq-based toxicogenomics assessment shows reduced biological effect of tobacco heating products when compared to cigarette smoke.

The battery of regulatory tests used to evaluate the risk of novel tobacco products such as heated tobacco products (THPs) presents some limitations including a bias towards the apical endpoint tested, and limited information on the mode of action. This is driving a paradigm shift to more holistic systems biology approaches. In this study, we used RNA-sequencing to compare the transcriptomic perturbations following acute exposure of a 3D airway tissue to the aerosols from two commercial THPs and a reference 3R4F cigarette. 2809 RNAs were differentially expressed for the 3R4F treatment and 115 and 2 RNAs for the two THPs (pFDR < 0.05, FC > 1.5), respectively. The relationship between the identified RNA features and gene ontologies were mapped showing a strong association with stress response, xenobiotics metabolism, and COPD-related terms for 3R4F. In contrast, fewer ontologies were found enriched for the THPs aerosols. "Response to wounding" was a common COPD-related term over-represented for the two THPs but at a reduced significance. Quantification of a cytokine panel post-exposure confirmed a pro-inflammatory effect of cigarette smoke but not for THPs. In conclusion, THPs have a reduced impact on gene expression compared to 3R4F.

Alternative approaches for acute inhalation toxicity testing to address global regulatory and non-regulatory data requirements: An international workshop report.

Inhalation toxicity testing, which provides the basis for hazard labeling and risk management of chemicals with potential exposure to the respiratory tract, has traditionally been conducted using animals. Significant research efforts have been directed at the development of mechanistically based, non-animal testing approaches that hold promise to provide human-relevant data and an enhanced understanding of toxicity mechanisms. A September 2016 workshop, "Alternative Approaches for Acute Inhalation Toxicity Testing to Address Global Regulatory and Non-Regulatory Data Requirements", explored current testing requirements and ongoing efforts to achieve global regulatory acceptance for non-animal testing approaches. The importance of using integrated approaches that combine existing data with in vitro and/or computational approaches to generate new data was discussed. Approaches were also proposed to develop a strategy for identifying and overcoming obstacles to replacing animal tests. Attendees noted the importance of dosimetry considerations and of understanding mechanisms of acute toxicity, which could be facilitated by the development of adverse outcome pathways. Recommendations were made to (1) develop a database of existing acute inhalation toxicity data; (2) prepare a state-of-the-science review of dosimetry determinants, mechanisms of toxicity, and existing approaches to assess acute inhalation toxicity; (3) identify and optimize in silico models; and (4) develop a decision tree/testing strategy, considering physicochemical properties and dosimetry, and conduct proof-of-concept testing. Working groups have been established to implement these recommendations.