Development of analytical procedures for determination of total chromium by quadrupole ICP-MS and high-resolution ICP-MS, and hexavalent chromium by HPLC-ICP-MS, in different materials used in the automotive industry.

A European directive was recently adopted limiting the use of hazardous substances such as Pb, Hg, Cd, and Cr(VI) in vehicle manufacturing. From July 2003 a maximum of 2 g Cr(VI) will be authorised per vehicle in corrosion-preventing coatings of key components. As no standardised procedures are available to check if produced vehicles are in agreement with this directive, the objective of this work was to develop analytical procedures for total chromium and Cr(VI) determination in these materials. The first step of this study was to optimise digestion procedures for total chromium determination in plastic and metallic materials by inductively coupled plasma mass spectrometry (ICP-MS). High resolution (HR) ICP-MS was used to examine the influence of polyatomic interferences on the detection of the (52)Cr(+) and (53)Cr(+) isotopes. If there was strong interference with m/ z 52 for plastic materials, it was possible to use quadrupole ICP-MS for m/ z 53 if digestions were performed with HNO(3)+H(2)O(2). This mixture was also necessary for digestion of chromium from metallic materials. Extraction procedures in alkaline medium (NH(4)(+)/NH(3) buffer solution at pH 8.9) assisted by sonication were developed for determining Cr(VI) in four different corrosion-preventing coatings by HPLC-ICP-MS. After optimisation and validation with the only solid reference material certified for its Cr(VI) content (BCR 545; welding dusts), the efficiency of this extraction procedure for screw coatings was compared with that described in the EN ISO 3613 standard generally used in routine laboratories. For coatings comprising zinc and aluminium passivated in depth with chromium oxides the extraction procedure developed herein enabled determination of higher Cr(VI) concentrations. This was also observed for the screw covered with a chromium passivant layer on zinc-nickel. For coating comprising a chromium passivant layer on alkaline zinc the standardized extraction procedure was more efficient. In the case of painted metallic plate, because of a reactive matrix towards Cr(VI), its extraction without degradation was difficult to perform.

On-line packed column supercritical fluid chromatography--microwave-induced plasma atomic emission.

Interfacing and evaluation of packed column supercritical fluid chromatography (SFC)-microwave-induced plasma atomic emission detection (AED) is described. Via a flow splitter and an integral restrictor, efficient transfer of solutes from column to detector without band broadening is obtained. Variation of CO2 flow-rate during pressure gradients has little influence on both AED signal and baseline drift while it provides similar sensitivity as in capillary SFC. Continuous introduction of CO2 in the plasma reduces the available range of emission domains; nevertheless the region of detection which is free of CO2 interferences allows selective detection of C1 and Br as reported in this paper. reserved.

[Localized form of xanthogranulomatous pyelonephritis in a child. Case report]. / Forme localisée de la pyélonéphrite xanthogranulomateuse chez l'enfant. A propos d'un cas.

The authors report the case of a 4 1/2-year-old boy with a localized xanthogranulomatous pyelonephritis. Review of the literature shows that this rare condition is often misdiagnosed before surgery, a preoperative diagnosis of Wilms' tumor being proposed instead of the exact one which is of benign prognosis. The pathogenesis is unknown.