Removal of methylene blue by porous biochar obtained by KOH activation from bamboo biochar.

A series of activated biochar (KBBC-700, KBBC-800 and KBBC-900) which were modified by KOH and pyrolysis at various temperatures from ball-milling bamboo powder were obtained. The physicochemical properties and pore structures of activated biochar were investigated by scanning electron microscopy (SEM), fourier transform infrared spectoscopy (FT-IR), X-ray diffraction (XRD) and N2 adsorption/desorption. The adsorption performance for the removal of methylene blue (MB) was deeply studied. The results showed that KBBC-900 obtained at activation temperature of 900 °C exhibited a great surface area which reached 562 m2/g with 0.460 cm3/g of total pore volume. The enhancement of adsorption capacity could be ascribed to the increase of surface oxygen-containing functional groups, aromatization and mesoporous channels. The adsorption capacity was up to 67.46 mg/g under the optimum adsorption parameters with 2 g/L of adsorbent dose, 11 of initial solution pH and 298 K of the reactive temperature. The adsorption capacity was 70.63% of the first time after the material was recycled for three cycles. The kinetics indicated that the adsorption equilibrium time for MB on KBBC-900 was of about 20 min with the data fitted better to the pseudo-second-order kinetics model. The adsorption process was mainly dominated by chemical adsorption. Meanwhile, the adsorption isotherm showed that the Langmuir model fitted the best, and thermodynamic parameters revealed that the adsorption reaction was the endothermic nature and the spontaneous process. Adsorption of MB mainly attributed to electrostatic interactions, cation-π electron interaction and redox reaction. This study suggested that the activated biochar obtained by KOH activation from bamboo biochar has great potentials in the practical application to remove MB from wastewater.

Degradation of Rhodamine B by activation of peroxymonosulfate using Co3O4-rice husk ash composites.

Rice husk is an agricultural residue in rice producing process with a worldwide annual output of more than 190 million tons. To investigate the possibility of disposal method, rice husk ash (RHA) derived from the rice husk residue was treated as a support material thus synthesizing a Co-based heterogeneous catalyst for peroxymonosulfate activation. The interconnected architecture of the Co3O4 nanoflakes grown vertically on the surface of RHA provided high surface area and structure stability. The as-synthesized heterogeneous catalyst exhibited enhanced ability for peroxymonosulfate activation towards Rhodamine B degradation. Degradation efficiency of Rhodamine B achieved 96.3% within 60 min by using Co3O4-0.5 RHA catalyst, while only 44.1% Rhodamine B was degraded for bare Co3O4. The effects of pH, catalyst dosage, peroxymonosulfate dosage, Rhodamine B concentration, inorganic ions and temperature were evaluated. Radical scavenging experiments revealed that 1O2 and O2•- other than SO4•- and •OH were the main active species. Furthermore, the addition of rice husk ash proved to be capable of reducing the dissolution of Co and extended the lifetime of the catalyst. This study elucidated a new opportunity for both utilizing agricultural residue and reducing contaminants in wastewater.

Rice husk hydrochars from metal chloride-assisted hydrothermal carbonization as biosorbents of organics from aqueous solution.

Hydrochar a carbon-rich material resulting from hydrothermal carbonization of biomass, has received substantial attention because of its potential application in various areas such as carbon sequestration, bioenergy production and environmental amelioration. A series of hydrochars were prepared by metal chloride-assisted hydrothermal carbonization of rice husk and characterized by elemental analysis, zeta potential, X-ray diffraction, Brunauer-Emmett-Teller measurements, Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy and scanning electron microscopy. The results reveal that the prepared hydrochars have carbon contents ranging from 45.01 to 58.71%, BET specific areas between 13.23 and 45.97 m2/g, and rich O-containing functional groups on the surfaces. The metal chlorides added in the feedwater could improve the degree of carbonization and show significant effects on the physical, chemical and adsorption properties of the hydrochars. The adsorption of the selected organics on the hydrochars is a spontaneous and physisorption-dominated process. The hydrochars possess larger adsorption capacities for 2-naphthol than for berberine hydrochloride and Congo red, and the modeling maximum adsorption capacities of 2-naphthol are in the range of 170.1-2680 mg/g. The adsorption equilibrium could be accomplished in 10, 40 and 30 min for 2-naphthol, berberine hydrochloride and Congo red, respectively. These results suggest metal chloride-assisted hydrothermal carbonization a promising method for converting biomass waste into effective adsorbents for wastewater treatment.

Microwave assisted hydrothermal preparation of rice straw hydrochars for adsorption of organics and heavy metals.

A series of rice straw hydrochars were produced through a microwave-assisted hydrothermal treatment method, characterized and used for the adsorption of three organics and two heavy metals from aqueous solutions. The hydrochars have carbon contents from 37.44% to 43.31%, are rich in oxygen containing functional groups, and the equilibrium of hydrothermal carbonization reactions could be reached rapidly in microwave environment. The hydrochars can effectively adsorb the model pollutants, the maximum adsorption capacities of Congo red, berberine hydrochloride and 2-naphthol at 298 K and initial concentration of 0.5 mg/mL were 222.1, 174.0 and 48.7 mg/g, respectively, and those of Zn2+ and Cu2+ were 112.8 and 144.9 mg/g, respectively. Adsorption thermodynamic parameters were calculated. These results suggest that microwave-assisted hydrothermal treatment is an effective method for the rapid production of hydrochars, and rice straw hydrochars are promising adsorbents for the removal of water pollutants such as organics and heavy metals.

Characterization, isotherm and kinetic data for adsorption of Congo red and 2-naphthol on different bamboo hydrochars.

Hydrochars were prepared using bamboo sawdust as raw material through hydrothermal carbonization with the present of acid or alkali in the medium and applied to remove Congo red and 2-naphthol from aqueous solutions. This data article provides information on FTIR and SEM profiles of the bamboo hydrochars, and the equation fitting results of the adsorption isotherms and kinetics for the two organics. The FTIR spectra show the differences of functional groups on the hydrochars with different process conditions. The SEM images show the surface morphology of selected hydrochars. Freundlich equation is slightly better than Langmuir model for the correlation of adsorption isotherms for both Congo red and 2-naphthol. Correlation coefficients from the pseudo-second order equation are greater than those of the pseudo-first order equation for both the organics on selected hydorchars.

Hydrochars from bamboo sawdust through acid assisted and two-stage hydrothermal carbonization for removal of two organics from aqueous solution.

A series of bamboo hydrochars were prepared through acid-assisted and two-stage hydrothermal carbonization, characterized and evaluated for the adsorption of Congo red and 2-naphthol in aqueous solutions. The hydrochars have rough surfaces with BET surface areas of 6.77-57.74 m2/g and oxygen-rich functional groups. The additives in feed water revealed critical influences on the physical-chemical and adsorption properties of the hydrochars. The hydrochars can adsorb the two organics effectively, the highest adsorption capacities for Congo red and 2-naphthol are 90.51 and 72.93 mg/g, respectively, at 0.1 mg/mL and 298 K. The adsorption of the two organics on the selected hydrochars is a spontaneous and mainly physical adsorption process. 95% and 92% of the adsorption equilibrium could be accomplished in one hour for Congo red and 2-naphthol on the selected hydrochars, respectively. This study provides references for the production and application of hydrochars as efficient adsorbents in wastewater treatment.

Highly enantioselective synthesis of dihydrocoumarin-fused dihydropyrans via the phosphine-catalyzed [4 + 2] annulation of allenones with 3-aroylcoumarins.

Phosphine-catalyzed [4 + 2] annulation between 3-aroylcoumarins and allenones has been developed. In the presence of a dipeptide phosphine catalyst 7, dihydrocoumarin-fused dihydropyrans were prepared in high yields and with excellent enantioselectivities.

Production and optimization of bamboo hydrochars for adsorption of Congo red and 2-naphthol.

Twelve hydrochars were produced from bamboo sawdust for adsorption of Congo red and 2-naphthol. The bamboo hydrochars have Brunauer-Emmett-Teller (BET) surface areas ranging from 2.63m(2)/g to 43.07m(2)/g, average pore diameters from 3.05nm to 3.83nm, pore volumes between 0.02cm(3)/g and 0.53cm(3)/g, and the surfaces of the hydrochars have diverse functional groups. The physico-chemical properties of the hydrochars critically depend on the hydrothermal conditions. All the hydrochars can adsorb Congo red and 2-naphthol from aqueous solutions, the largest adsorption capacity for Congo red is 33.7mg/g at the equilibrium concentration of 0.1mg/mL at 25°C, and the highest adsorption amount for 2-naphthol is 12.2mg/g at 25°C and 0.1mg/mL. Freundlich model can describe the adsorption isotherms of the both adsorbates slightly better than Langmuir model. These results provide a reference to the production and use of hydrochars as potential adsorbents in wastewater treatment.