How to describe the time-dependent dissolution of engineered nanomaterials?

Numerous processes such as solubility, agglomeration/aggregation, or protein corona formation may change over time and significantly affect engineered nanomaterial (ENM) structure, property, and availability, resulting in their reduced or increased toxicological activity. Therefore, understanding the dynamics of these processes is essential for assessing and managing the risks of ENMs during their lifecycle, ensuring safety by design. Of these processes, the importance of solubility (i.e., the ability to release ions from the surface) is undeniable. Thus, we propose a practical approach, the Kalapus equation (KEq), to determine ENMs' dissolution over time. As a proof-of-concept, the KEq was applied to determine the solubility of six commercially used metal and metal oxide nanoparticles over time. The KEq exhibited a higher coefficient of determination (R2 = 0.995-0.999) than the logarithmic equation (R2 = 0.835-0.986), and the pseudo-first-order equation (R2 = 0.915-0.994) over a range of experimental data. The newly introduced Kalapus equation outperformed the logarithmic and pseudo-first-order equations when extrapolating beyond the time range in which solubility was experimentally determined. The mean absolute error in solubility prediction for the KEq was 3.29 % and 4.28 % for the first and second data points, respectively, significantly lower than the 13.46 % and 18.05 % observed for the pseudo-first-order/first-order equation. The proposed equation can be used as a part of New Generation Risk Assessment (NGRA) methodology, especially new Integrated Approaches to Testing and Assessments (IATAs).

Bioconcentration potential of ionic liquids: New data on membrane partitioning and its comparison with predictions obtained by COSMOmic.

Ionic liquids (ILs) have recently gained significant attention in both the scientific community and industry, but there is a limited understanding of the potential risks they might pose to the environment and human health, including their potential to accumulate in organisms. While membrane and storage lipids have been considered as primary sorption phases driving bioaccumulation, in this study we used an in vitro tool known as solid-supported lipid membranes (SSLMs) to investigate the affinity of ILs to membrane lipid - phosphatidylcholine and compare the results with an existing in silico model. Our findings indicate that ILs may have a strong affinity for the lipids that form cell membranes, with the key factor being the length of the cation's side chain. For quaternary ammonium cations, increase in membrane affinity (logMA) was observed from 3.45 ± 0.06 at 10 carbon atoms in chain to 4.79 ± 0.06 at 14 carbon atoms. We also found that the anion can significantly affect the membrane partitioning of the cation, even though the anions themselves tend to have weaker interactions with phospholipids than the cations of ILs. For 1-methyl-3-octylimidazolium cation the presence of tricyanomethanide anion caused increase in logMA to 4.23 ± 0.06. Although some of our data proved to be consistent with predictions made by the COSMOmic model, there are also significant discrepancies. These results suggest that further research is needed to improve our understanding of the mechanisms and structure-activity relationships involved in ILs bioconcentration and to develop more accurate predictive models.

Predicting zeta potential of liposomes from their structure: A nano-QSPR model for DOPE, DC-Chol, DOTAP, and EPC formulations.

Liposomes, nanoscale spherical structures composed of amphiphilic lipids, hold great promise for various pharmaceutical applications, especially as nanocarriers in targeted drug delivery, due to their biocompatibility, biodegradability, and low immunogenicity. Understanding the factors influencing their physicochemical properties is crucial for designing and optimizing liposomes. In this study, we have presented the kernel-weighted local polynomial regression (KwLPR) nano-quantitative structure-property relationships (nano-QSPR) model to predict the zeta potential (ZP) based on the structure of 12 liposome formulations, including 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), 3ß-[N-(N',N'-dimethylaminoethane)-carbamoyl]cholesterol (DC-Chol), 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP), and L-α-phosphatidylcholine (EPC). The developed model is well-fitted (R2 = 0.96, RMSEC = 5.76), flexible (QCVloo2 = 0.83, RMSECVloo = 10.77), and reliable (QExt2= 0.89 RMSEExt = 5.17). Furthermore, we have established the formula for computing molecular nanodescriptors for liposomes, based on constituent lipids' molar fractions. Through the correlation matrix and principal component analysis (PCA), we have identified two key structural features affecting liposomes' zeta potential: hydrophilic-lipophilic balance (HLB) and enthalpy of formation. Lower HLB values, indicating a more lipophilic nature, are associated with a higher zeta potential, and thus stability. Higher enthalpy of formation reflects reduced zeta potential and decreased stability of liposomes. We have demonstrated that the nano-QSPR approach allows for a better understanding of how the composition and molecular structure of liposomes affect their zeta potential, filling a gap in ZP nano-QSPR modeling methodologies for nanomaterials (NMs). The proposed proof-of-concept study is the first step in developing a comprehensive and computationally based system for predicting the physicochemical properties of liposomes as one of the most important drug nano-vehicles.

A machine learning q-RASPR approach for efficient predictions of the specific surface area of perovskites.

In this study, the specific surface area of various perovskites was modeled using a novel quantitative read-across structure-property relationship (q-RASPR) approach, which clubs both Read-Across (RA) and quantitative structure-property relationship (QSPR) together. After optimization of the hyper-parameters, certain similarity-based error measures for each query compound were obtained. Clubbing some of these error-based measures with the previously selected features along with the Read-Across prediction function, a number of machine learning models were developed using Partial Least Squares (PLS), Ridge Regression (RR), Linear Support Vector Regression (LSVR), Random Forest (RF) regression, Gradient Boost (GBoost), Adaptive Boosting (Adaboost), Multiple Layer Perceptron (MLP) regression and k-Nearest Neighbor (kNN) regression. Based on the repeated cross-validation as well as external prediction quality and interpretability, the PLS model (nTraining = 38, nTest = 12, R T r a i n 2 ${{R}_{Train}^{2}}$ =0.737, Q L O O 2 = 0 . 637 , R T e s t 2 = 0 . 898 , Q F 1 T e s t 2 = 0 . 901 ) ${{Q}_{LOO}^{2}=0.637,\ {R}_{Test}^{2}=0.898,{\rm \ }\ {Q}_{F1\left(Test\right)}^{2}=0.901)}$ was selected as the best predictor which underscored the previously reported results. The finally selected model should efficiently predict specific surface areas of other perovskites for their use in photocatalysis. The new q-RASPR method also appears promising for the prediction of several other property endpoints of interest in materials science.

Quantitative multi-species toxicity modeling: Does a multi-species, machine learning model provide better performance than a single-species model for the evaluation of acute aquatic toxicity by organic pollutants?

The toxicological profile of any chemical is defined by multiple endpoints and testing procedures, including representative test species from different trophic levels. While computer-aided methods play an increasingly important role in supporting ecotoxicology research and chemical hazard assessment, most of the recently developed machine learning models are directed towards a single, specific endpoint. To overcome this limitation and accelerate the process of identifying potentially hazardous environmental pollutants, we are introducing an effective approach for quantitative, multi-species modeling. The proposed approach is based on canonical correlation analysis that finds a pair(s) of uncorrelated, linear combinations of the original variables that best defines the overall variability within and between multiple biological responses and predictor variables. Its effectiveness was confirmed by the machine learning model for estimating acute toxicity of diverse organic pollutants in aquatic species from three trophic levels: algae (Pseudokirchneriella subcapitata), daphnia (Daphnia magna), and fish (Oryzias latipes). The multi-species model achieved a favorable predictive performance that were in line with predictive models derived for the aquatic organisms individually. The chemical bioavailability and reactivity parameters (n-octanol/water partition coefficient, chemical potential, and molecular size and volume) were important to accurately predict acute ecotoxicity to the three aquatic organisms. To facilitate the use of this approach, an open-source, Python-based script, named qMTM (quantitative Multi-species Toxicity Modeling) has been provided.

How Do the Different Types of Carrier and Drying Techniques Affect the Changes in Physico-Chemical Properties of Powders from Chokeberry Pomace Extracts?

Chokeberry fruit, one of the richest plant sources of bioactives, is processed into different foodstuffs, mainly juice, which generates a considerable amount of by-products. To follow the latest trends in the food industry considering waste management, the study aimed to produce chokeberry pomace extract powders and conduct experimental and chemometric assessment of the effect of different carriers and drying techniques on the physico-chemical properties of such products. The PCA analysis showed that the examined powders were classified into two groups: freeze-dried (variation in case of moisture content, water activity, colour, and browning index) and vacuum-dried (bulk density). No clear pattern was observed for the physical properties of carrier added products. The sum of polyphenolics (phenolic acids, anthocyanins and flavonols) ranged from 3.3-22.7 g/100 g dry matter. Drying techniques had a stronger effect on the polyphenols profile than the type of carrier. Hydroxymethyl-L-furfural formation was enhanced by inulin addition during high-temperature treatment. Overall, the addition of maltodextrin and trehalose mixture for freeze drying and vacuum drying at 90 °C caused the highest retention of polyphenolics and the lowest formation of hydroxymethyl-L-furfural; however, an individual and comprehensive approach is required when the obtainment of high-quality chokeberry powders is expected.

Generating accurate in silico predictions of acute aquatic toxicity for a range of organic chemicals: Towards similarity-based machine learning methods.

There has been an increase in the use of non-animal approaches, such as in silico and/or in vitro methods, for assessing the risks of hazardous chemicals. A number of machine learning algorithms link molecular descriptors that interpret chemical structural properties with their biological activity. These computer-aided methods encounter several challenges, the most significant being the heterogeneity of datasets; more efficient and inclusive computational methods that are able to process large and heterogeneous chemical datasets are needed. In this context, this study verifies the utility of similarity-based machine learning methods in predicting the acute aquatic toxicity of diverse organic chemicals on Daphnia magna and Oryzias latipes. Two similarity-based methods were tested that employ a limited training dataset, most similar to a given fitting point, instead of using the entire dataset that encompasses a wide range of chemicals. The kernel-weighted local polynomial approach had a number of advantages over the distance-weighted k-nearest neighbor (k-NN) algorithm. The results highlight the importance of lipophilicity, electrophilic reactivity, molecular polarizability, and size in determining acute toxicity. The rigorous model validation ensures that this approach is an important tool for estimating toxicity in new or untested chemicals.

The kernel-weighted local polynomial regression (KwLPR) approach: an efficient, novel tool for development of QSAR/QSAAR toxicity extrapolation models.

The ability of accurate predictions of biological response (biological activity/property/toxicity) of a given chemical makes the quantitative structure-activity/property/toxicity relationship (QSAR/QSPR/QSTR) models unique among the in silico tools. In addition, experimental data of selected species can also be used as an independent variable along with other structural as well as physicochemical variables to predict the response for different species formulating quantitative activity-activity relationship (QAAR)/quantitative structure-activity-activity relationship (QSAAR) approach. Irrespective of the models' type, the developed model's quality, and reliability need to be checked through multiple classical stringent validation metrics. Among the validation metrics, error-based metrics are more significant as the basic idea of a good predictive model is to improve the predictions' quality by lowering the predicted residuals for new query compounds. Following the concept, we have checked the predictive quality of the QSAR and QSAAR models employing kernel-weighted local polynomial regression (KwLPR) approach over the traditional linear and non-linear regression-based approaches tools such as multiple linear regression (MLR) and k nearest neighbors (kNN). Five datasets which were previously modeled using linear and non-linear regression method were considered to implement the KwPLR approach, followed by comparison of their validation metrics outcomes. For all five cases, the KwLPR based models reported better results over the traditional approaches. The present study's focus is not to develop a better or improved QSAR/QSAAR model over the previous ones, but to demonstrate the advantage, prediction power, and reliability of the KwLPR algorithm and establishing it as a novel, powerful cheminformatic tool. To facilitate the use of the KwLPR algorithm for QSAR/QSPR/QSTR/QSAAR modeling, the authors provide an in-house developed KwLPR.RMD script under the open-source R programming language.

Aquatic toxicity (Pre)screening strategy for structurally diverse chemicals: global or local classification tree models?

With an ever-increasing number of synthetic chemicals being manufactured, it is unrealistic to expect that they will all be subjected to comprehensive and effective risk assessment. A shift from conventional animal testing to computer-aided methods is therefore an important step towards advancing the environmental risk assessments of chemicals. The aims of this study are two-fold: firstly, it examines the relationships between structural and physicochemical features of a diverse set of organic chemicals, and their acute aquatic toxicity towards Daphnia magna and Oryzias latipes using a classification tree approach. Secondly, it compares the efficiency and accuracy of the predictions of two modeling schemes: local models that are inherently restricted to a smaller subset of structurally-related substances, and a global model that covers a wider chemical space and a number of modes of toxic action. The classification tree-based models differentiate the organic chemicals into either 'highly toxic' or 'low to non-toxic' classes, based on internal and external validation criteria. These mechanistically-driven models, which demonstrate good performance, reveal that the key factors driving acute aquatic toxicity are lipophilicity, electrophilic reactivity, molecular polarizability and size. A comparative analysis of the performance of the two modeling schemes indicates that the local models, trained on homogeneous data sets, are less error prone, and therefore superior to the global model. Although the global models showed worse performance metrics compared to the local ones, their applicability domain is much wider, thereby significantly increasing their usefulness in practical applications for regulatory purposes. This demonstrates their advantage over local models and shows they are an invaluable tool for modeling heterogeneous chemical data sets.

Chemometric contribution for deeper understanding of thermally-induced changes of polyphenolics and the formation of hydroxymethyl-L-furfural in chokeberry powders.

During fruit juice powdering process numerous alterations may occur as a result of interactions of native bioactives and carriers. The objective was to investigate the effect of carrier addition on the changes in polyphenols' profile in chokeberry powders obtained by spray- (180 °C), vacuum- (50, 70, 90 °C) and freeze-drying and to evaluate the interactions between bioactives toward formation of process contaminants. Phenolic acids, anthocyanins, flavonols, flavan-3-ols and procyanidins were identified in powders (18.1 - 35.4 g kg-1 dry matter). Vacuum drying at 90 °C resulted in a significant increase in (+)-catechin and HMF contents. The addition of inulin enhanced the generation of HMF compared to maltodextrin. Overall, addition of maltodextrin allowed for better anthocyanins' retention. Depending on the drying method used, maltodextrin allowed for better retention of polyphenolics during freeze- and vacuum drying, while inulin during spray drying. The elaboration of the results was supported by chemometric analysis.

New Workflow for QSAR Model Development from Small Data Sets: Small Dataset Curator and Small Dataset Modeler. Integration of Data Curation, Exhaustive Double Cross-Validation, and a Set of Optimal Model Selection Techniques.

Quantitative structure-activity relationship (QSAR) modeling is a well-known in silico technique with extensive applications in several major fields such as drug design, predictive toxicology, materials science, food science, etc. Handling small-sized datasets due to the lack of experimental data for specialized end points is a crucial task for the QSAR researcher. In the present study, we propose an integrated workflow/scheme capable of dealing with small dataset modeling that integrates dataset curation, "exhaustive" double cross-validation and a set of optimal model selection techniques including consensus predictions. We have developed two software tools, namely, Small Dataset Curator, version 1.0.0, and Small Dataset Modeler, version 1.0.0, to effortlessly execute the proposed workflow. These tools are freely available for download from https://dtclab.webs.com/software-tools . We have performed case studies employing seven diverse datasets to demonstrate the performance of the proposed scheme (including data curation) for small dataset QSAR modeling. The case studies also confirm the usability and stability of the developed software tools.