ABSTRACT
To date, few studies investigated the differences between the two main gluten-free (GF) brewing techniques, such as the use of enzymes and the use of unconventional GF grains in brewing, by consumer perspective. In this study a GF beer brewed with sorghum and quinoa, as brewing adjuncts, was compared to the enzymatic-treated counterpart, in order to evaluate the effect of deglutinization treatment on physicochemical, volatile, and sensory characteristics of final beer. Moreover, the influence of brewing process and raw materials information on consumers' sensory perceptions, willingness to buy (WTB) and willingness to pay (WTP) was also investigated (n = 105 consumers), under blind (B), expected (E), and informed (I) conditions. The enzymatic-treated sample showed comparable physicochemical attributes with the untreated counterpart, except for a significant reduction in color and foam stability (p < 0.05). Non-significant difference between samples was found in the overall liking, WTB, and WTP mean scores in all three sensory test conditions (p > 0.05). The information about the deglutinization treatment had a negative impact on overall liking (p < 0.01), although WTP for both samples was significantly higher in the informed test than in blind condition (p < 0.05). Overall, Check-All-That-Apply test results confirmed that the deglutinization treatment does not affect the beer sensory profile, even if the information about brewing ingredients and technologies may slightly influence the consumers' sensory perception. Therefore, this result proves that it is possible to produce a marketable GF beer, simply by partially replacing 40% of barley malt with unconventional GF grains, without using enzymes for gluten reduction purpose.
Subject(s)
Beer , Motivation , Beer/analysis , Sensation , Edible Grain , GlutensABSTRACT
In recent years, there has been a growing interest in a diet low in fermentable oligosaccharides, disaccharides, monosaccharides, and polyols (FODMAPs) as a promising therapeutic approach to reduce the symptoms associated with irritable bowel syndrome (IBS). Hence, the development of low FODMAPs products is an important challenge for the food industry, and among the various foodstuffs associated with the intake of FODMAPs, cereal-based products represent an issue. In fact, even if their content in FODMAPs is limited, their large use in diet can be an important factor in developing IBS symptoms. Several useful approaches have been developed to reduce the FODMAPs content in processed food products. Accurate ingredient selection, the use of enzymes or selected yeasts, and the use of fermentation steps carried out by specific lactic bacteria associated with the use of sourdough represent the technical approaches that have been investigated, alone or in combination, to reduce the FODMAPs content in cereal-based products. This review aims to give an overview of the technological and biotechnological strategies applicable to the formulation of low-FODMAPs products, specifically formulated for consumers affected by IBS. In particular, bread has been the foodstuff mainly investigated throughout the years, but information on other raw or processed products has also been reported. Furthermore, taking into account the required holistic approach for IBS symptoms management, in this review, the use of bioactive compounds that have a positive impact on reducing IBS symptoms as added ingredients in low-FODMAPs products is also discussed.
ABSTRACT
Hydrophobic Deep Eutectic Solvents (HDESs) represent a novel kind of solvent. While several studies investigated their properties, just a few dealt with their use for extracting and recovering bioactive compounds from raw materials, wastes and by-products, even if HDESs might represent an interesting alternative when producing pharmaceuticals, foodstuffs and cosmetics. Furthermore, their use may contribute to realizing more sustainable green processes. This review focuses on HDESs, with particular emphasis on Natural HDESs, discussing their properties and uses, highlighting their role as extractants in food applications, both from an analytical and processing point of view, and underlining the positive and negative aspects. While of prospective interest, currently the use of HDESs at industrial level remains a challenge, with several aspects needing further investigation. In order to scale-up the process, more research should focus on key issues, such as solute recovery, solvent recycling and extraction yields, as well as potential health hazards.
Subject(s)
Deep Eutectic Solvents , Food , Prospective Studies , Solvents/chemistry , Hydrophobic and Hydrophilic InteractionsABSTRACT
Few studies have investigated at the same time how physicochemical, volatile, and sensory characteristics affect coffee liking. The aim of this study is to evaluate the influence of geographical origin and variety on physicochemical parameters and volatile compounds composition of mono-origin and mono-variety coffees. Check-all-that-apply (CATA) method was used with the aim of identifying the drivers of coffee liking. Moisture content, bulk density, solubility index, color parameters, and phenols and caffeine content were useful parameters for discriminating Robusta from Arabica variety, but not samples from different origins. The hierarchical cluster and principal component analyses performed on the headspace compositions showed a quite sharp ability to group the samples based on their variety. Based on CATA results, roasted attribute, related to the presence of pyrazines, was considered a positive driver of coffee liking unlike grassy and acidic attributes (associated to the presence of acids and aldehydes, respectively). Findings from this study can be a useful tool for coffee manufacturers for a winning market strategy, helping them in the choice of the most suitable raw materials and process conditions in order to produce a well-balanced beverage by enhancing all the possible positive drivers of acceptability and reducing the negative ones.
Subject(s)
Caffeine , Coffee , Coffee/chemistry , Caffeine/analysis , Phenols/analysis , Aldehydes/analysis , Pyrazines/analysisABSTRACT
In this study, 40% of unmalted gluten free (GF) grains (sorghum, millet, buckwheat, quinoa and amaranth) was used in brewing process, in gelatinized and ungelatinized form, in order to produce GF beer and to extend current knowledge about their suitability as brewing adjuncts. Partial replacement of barley malt with GF grains led to a significant decrease of extract (°P) and alcohol (%v/v) content compared to control beer (p < 0.05), except for quinoa beer (QB). Results from Principal Component Analysis (PCA) highlighted a satisfactory classification of experimental beers according to the two different forms of GF grains (gelatinized and ungelatinized). However, beers brewed with ungelatinized grains (mainly sorghum and quinoa) showed acceptable technological and sensory properties, thus suggesting that the pre-gelatinization step could be bypassed with a view to more environmentally and economically sustainable time-saving process. In addition, all beer samples showed a gluten content higher than 20 ppm.
Subject(s)
Chenopodium quinoa , Fagopyrum , Sorghum , Beer/analysis , Edible Grain/chemistry , Fermentation , Glutens/analysisABSTRACT
The glycaemic index (GI) is used to demonstrate the tendency of foods to increase blood glucose and is thus an important characteristic of newly formulated foods to tackle the rising prevalence of diabetics and associated diseases. The GI of gluten-free biscuits formulated with alternate flours, resistant starch and sucrose replacers was determined using in vivo methods with human subjects. The relationship between in vivo GI values and the predicted glycaemic index (pGI) from the in vitro digestibility-based protocols, generally used by researchers, was established. The in vivo data showed a gradual reduction in GI with increased levels of sucrose substitution by maltitol and inulin with biscuits where sucrose was fully replaced, showing the lowest GI of 33. The correlation between the GI and pGI was food formulation-dependent, even though GI values were lower than the reported pGI. Applying a correction factor to pGI tend to close the gap between the GI and pGI for some formulations but also causes an underestimation of GI for other samples. The results thus suggest that it may not be appropriate to use pGI data to classify food products according to their GI.
ABSTRACT
The lentil seed coat is a waste by-product still rich in phenolic compounds, specifically condensed tannins. The effect of different solvents, as well as different processes, namely conventional solid-liquid extraction (CSLE) and ultrasound-assisted extraction (UAE), on the extraction yield of specific phenolic compound classes was studied. Four empirical two-parameter models were examined to select the one that better fit the experimental data obtained under different operating conditions. Additionally, ultra-high-pressure liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry (UHPLC-ESI/QTOF-MS) was employed to profile the phenolic compounds obtained under distinct extraction conditions. In the operative conditions adopted here, the bioactive compounds yield achieved using UAE was lower than that obtained with CSLE. The kinetics of polyphenols, flavonoids, and condensed tannins extraction from the lentil seed coat were successfully fitted to the power-law models, yielding mean values of the root mean square < 5.4%, standard error of estimation < 0.53, and coefficient of determination > 0.8. In addition, the UHPLC-ESI/QTOF-MS of the lentil seed coat extracts allowed the putative recognition of nearly 500 compounds, mainly flavonoids and phenolic acids.
ABSTRACT
Vitamin D and magnesium-calcium carbonate nanoparticles were used to fortify a newly developed healthy chocolate spread formulated with inulin and maltitol as sugar replacers and alternative to palm oil to reduce the concentration of saturated fatty acid. These samples were compared with well-known commercially available chocolate spreads in terms of rheology, polyphenols content and in vitro digestion, sensory attributes and willingness to buy. The fortified chocolate spreads showed comparable if not better acceptability than the current products on the market and over 80% of the participants were inclined to buy and 66% prepared to spend 10 to 15% more money on the product enriched with the three micronutrients. The results also demonstrate that the incorporation of nanoparticles could affect the rheological and physio-chemical properties of the formulations and an appropriate ratio between the fat phase and particles seems an important factor to consider.
Subject(s)
Cacao , Chocolate , Carbohydrates , Humans , Micronutrients , SugarsABSTRACT
The nutritional quality of animal products is strongly related to their fatty acid content and composition. Nowadays, attention is paid to the possibility of producing healthier foods of animal origin by intervening in animal feed. In this field, the use of condensed tannins as dietary supplements in animal nutrition is becoming popular due to their wide range of biological effects related, among others, to their ability to modulate the rumen biohydrogenation and biofortify, through the improvement of the fatty acids profile, the derivate food products. Unfortunately, tannins are characterized by strong astringency and low bioavailability. These disadvantages could be overcome through the microencapsulation in protective matrices. With this in mind, the optimal conditions for microencapsulation of a polyphenolic extract rich in condensed tannins by spray drying using a blend of maltodextrin (MD) and gum Arabic (GA) as shell material were investigated. For this purpose, after the extract characterization, through spectrophotometer assays and ultra-high-performance liquid chromatography-quadrupole time-of-flight (UHPLC-QTOF) mass spectrometry, a central composite design (CCD) was employed to investigate the combined effects of core:shell and MD:GA ratio on the microencapsulation process. The results obtained were used to develop second-order polynomial regression models on different responses, namely encapsulation yield, encapsulation efficiency, loading capacity, and tannin content. The formulation characterized by a core:shell ratio of 1.5:5 and MD:GA ratio of 4:6 was selected as the optimized one with a loading capacity of 17.67%, encapsulation efficiency of 76.58%, encapsulation yield of 35.69%, and tannin concentration of 14.46 g/100 g. Moreover, in vitro release under varying pH of the optimized formulation was carried out with results that could improve the use of microencapsulated condensed tannins in animal nutrition for the biofortification of derivates.
ABSTRACT
The brewing industry produces high quantities of solid and liquid waste, causing disposal issues. Brewing spent grains (BSGs) and brewing spent hop (BSH) are important by-products of the brewing industry and possess a high-value chemical composition. In this study, BSG and BSH, obtained from the production process of two different types of ale beer (Imperial red and Belgian strong beer) were characterized in terms of valuable components, including proteins, carbohydrates, fat, dietary fiber, ß-glucans, arabinoxylans, polyphenols, and phenolic acids, and antioxidant activity (Ferric Reducing Antioxidant Power Assay (FRAP), 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-Azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS)). Significant concentrations of total polyphenols were observed in both BSH and BSG samples (average of about 10 mg GAE/g of dry mass); however, about 1.5-fold higher levels were detected in by-products of Belgian strong ale beer compared with Imperial red. Free and bound phenolic acids were quantified using a validated chromatographic method. A much higher level of total phenolic acids (TPA) (about 16-fold higher) was found in BSG samples compared with BSHs. Finally, their antioxidant potential was verified. By-products of Belgian strong ale beer, both BSG and BSH, showed significantly higher antioxidative capacity (about 1.5-fold lower inhibitory concentration (IC50) values) compared with spent grains and hop from the brewing of Imperial red ale. In summary, BSG and BSH may be considered rich sources of protein, carbohydrates, fiber, and antioxidant compounds (polyphenols), and have the potential to be upcycled by transformation into value-added products.
ABSTRACT
Hypercholesterolemia, which is an increase in total and low-density lipoprotein (LDL) serum cholesterol, is an important risk factor for the development of cardiovascular diseases. Lifestyle modifications underpin any action plan for reducing serum cholesterol. Phytosterols are natural compounds belonging to the triterpenes family. Thanks to their structural analogy with cholesterol, phytosterols have the ability to reduce serum LDL-cholesterol levels. Phytosterols are used to enrich or fortify a broad spectrum of food products. Like unsaturated fatty acids and cholesterol, phytosterols are easily oxidized. Microencapsulation could be a useful tool to overcome this and other drawbacks linked to the use of phytosterols in food fortification. In this review, in addition to explaining the phytosterols' mechanisms of action, a focus on the use of free and encapsulated phytosterols for the formulation of functional foods, taking also into account both technological and legislative issues, is given.
ABSTRACT
The quality of ready meals is affected by several factors that may impair stability and nutritional value. In this work, we evaluated the overall quality of four traditional meals (Basilicata region) prepared according to the cook&chill method, packaged in air or modified atmosphere packaging (MAP; 70% N2 and 30% CO2), and stored at 4 °C for seven days. The shelf-life was determined by Listeria monocytogenes challenge testing and inactivation by microwave (MW) heating was assessed. The counts at the production day were excellent in three meals out of four, whereas one had high levels of spoilage and pathogens both as soon as the preparation and after seven days. MAP was partially effective only against the growth of the aerobic mesophilic species, whereas sensory analysis revealed that MAP may preserve many of sensory attributes. The average shelf-life of the meals ranged from 11 to 13 days, however, the potential shelf-life was undetectable in one out four meals, as L. monocytogenes growth was inhibited two days after the inoculum. In the inoculated meals, MW heating provided a partial inactivation (25%) of the pathogen. The overall quality of type the meals was partially satisfactory; post-cooking contaminations may affect the microbial load and reduce the palatability over the storage period and, above all, may involve biological hazards which consumers' habits may not be able to eliminate.
ABSTRACT
Phytosterols were microencapsulated by spray drying in a shell represented by WPI, inulin and chitosan at four different combinations through the formulation of aqueous suspensions. Moreover, two concentrations of Tween 80 (1.25% and 2.50% w/w) and two inlet temperatures (125⯰C and 155⯰C) were tested. The effect of the different experimental conditions on the process yield and on the microcapsules properties was evaluated. A significant effect of all variables on the microcapsule properties was found. Accordingly, the best performance, with the maximum loading capacity of 25%, was obtained by using only WPI as shell material, Tween 80 at 1.25% and inlet temperature of 155⯰C. The process was successfully scaled-up from laboratory equipment to a semi-technical scale keeping the optimal shell formulation and process conditions.
Subject(s)
Capsules/chemical synthesis , Drug Compounding/methods , Functional Food/analysis , Phytosterols/chemistry , Chitosan/chemistry , Desiccation/methods , Inulin/chemistry , Oxidation-Reduction , Particle Size , Phytosterols/pharmacology , Polysorbates , Suspensions/chemistry , Temperature , Whey Proteins/chemistry , Whey Proteins/isolation & purificationABSTRACT
Chocolate is one of the most consumed delicacies in the world. Nowadays high-cocoa polyphenol-rich chocolates, probiotic chocolates, and prebiotic chocolates are getting more attention. In light of this, dark chocolate containing microencapsulated phytosterols (MPs) has been developed to reduce cholesterol in individuals. In particular, different dark chocolates containing 64, 72 and 85% of cocoa, fortified with 0, 5, 10 and 15% MP have been produced. The obtained chocolates were characterized by a particle size distribution lower than 30 µm and were stable from a chemical point of view. Specifically, peroxide values were always lower than 2 meq O2 per kg of fat, also after three months of storage. The bioaccessibility of phytosterols was comparable with literature values and the antioxidant activity reached a value of 92 µg trolox per g chocolate for samples obtained from 85% of cocoa. Moreover, sensory evaluation demonstrated a positive effect on the acceptability of the functional chocolate produced and a significant effect of the information on the final sample acceptability.
Subject(s)
Chocolate/analysis , Food Additives/metabolism , Food, Fortified/analysis , Phytosterols/metabolism , Adult , Drug Compounding , Female , Food Additives/chemistry , Humans , Male , Phytosterols/chemistry , Taste , Young AdultABSTRACT
This study was carried out in two olive orchards (Olea europaea L., cv. Chemlali) located in a polluted area near a fertilizers factory and in a control unpolluted site, managed with similar cultivation techniques. The aim was to investigate the physiological and biochemical responses of polluted plants (PP), exposed to atmospheric metal contamination (Cd, Cu, Fe, Mn, Ni and Pb) as compared to control plants (CP). Leaves, roots and fruits of PP showed a depression of their non-enzymatic and enzymatic antioxidant defences and a disruption of their hormonal homeostasis. The anomalous physiological status of PP was also demonstrated by the lower values of pigments in leaves and fruits, as compared to CP. Atmospheric metals negatively affected olive oil chemical and sensory quality. However, despite metal deposition on fruit surfaces, the accumulation of potentially toxic metals in olive oil was negligible. Considering that olive oil is an important food product worldwide and that many productive olive orchards are exposed to several sources of pollution, this work could contribute to clarify the effects of atmospheric metal pollution on olive oil quality and its potential toxicity for humans.
Subject(s)
Air Pollutants/metabolism , Metals, Heavy/metabolism , Olea/drug effects , Olive Oil/analysis , Air Pollutants/analysis , Environmental Monitoring , Fruit/drug effects , Fruit/metabolism , Metals, Heavy/analysis , Olea/metabolism , Plant Leaves/drug effects , Plant Leaves/metabolism , TunisiaABSTRACT
The quantitative descriptive analysis (QDA) was combined with temporal dominance of sensations (TDS) to assess the sensory properties of Lucanian dry-sausages either added with nitrate, nitrite and l-ascorbic acid (NS), or not (NNS). Both QDA and TDS differentiated the two groups of sausages. NNS products were perceived with higher intensity of hardness (P<0.05) and tended to be perceived with higher intensities of flavor (P<0.10), pepper (P<0.20), and oiliness (P<0.20), while resulting lower in chewiness (P<0.20). TDS showed that in all the sausages hardness was the first dominant attribute; then, in NNS products flavor remained dominant until the end of tasting, whereas in NS products oiliness prevailed. In conclusion, TDS showed that the perception of some textural parameters, such as oiliness, during mastication was more dominant in NS products, whereas using conventional QDA this attribute appeared higher in sausages manufactured without preservatives. Therefore, TDS provided additional information for the description and differentiation of Lucanian sausages.
Subject(s)
Food Preservatives , Meat Products/analysis , Sensation , Taste , Adult , Animals , Ascorbic Acid , Female , Food Handling/methods , Hardness , Humans , Nitrates , Nitrites , Sus scrofaABSTRACT
Many nutritional experts and food scientists are interested in developing functional foods containing bioactive agents and many of these health-promoting ingredients may benefit from nano/micro-encapsulation technology. Encapsulation has been proven useful to improve the physical and the chemical stability of bioactive agents, as well as their bioavailability and efficacy, enabling their incorporation into a wide range of formulations aimed to functional food production. There are several reviews concerning nano/micro-encapsulation techniques, but none are focused on the incorporation of the bioactive agents into food matrices. The aim of this paper was to investigate the development of microencapsulated food, taking into account the different bioactive ingredients, the variety of processes, techniques and coating materials that can be used for this purpose.
Subject(s)
Functional Food/analysis , Animals , Biological Availability , Food Technology/methods , Health Promotion , Humans , Micronutrients/administration & dosage , Micronutrients/pharmacokinetics , Nanocapsules/administration & dosage , NanotechnologyABSTRACT
BACKGROUND: Recently, there has been a significant increase in the number of microbreweries. Usually, craft beers are bottle conditioned; however, few studies have investigated beer refermentation. One of the objectives of this study was to evaluate the impacts of different experimental conditions, specifically yeast strain, priming solution and temperature, on the standard quality attributes, the volatile compounds and the sensory profile of the bottle-conditioned beer. The other aim was to monitor the evolution of volatile compounds and amino acids consumption throughout the refermentation process to check if it is possible to reduce the time necessary for bottle conditioning. RESULTS: The results indicate that the volatile profile was mainly influenced by the strain of yeast, and this may have obscured the possible impacts of the other parameters. Our results also confirm that the two yeast strains showed different metabolic activity, particularly with respect to esters production. Moreover, we found the Safbrew S-33® strain when primed with Siromix® and refermented at 30 °C yielded the fastest formation of higher alcohols while maintaining low production of off-flavours. CONCLUSIONS: These results suggest a formulation that may reduce the time needed for bottle conditioning without affecting the quality of the final beer which may simultaneously improve efficiency and economic profits. © 2016 Society of Chemical Industry.
Subject(s)
Beer/microbiology , Fermentation , Food Microbiology , Food Quality , Saccharomyces cerevisiae/classification , Adult , Aged , Ethanol , Female , Humans , Male , Middle Aged , Taste , Temperature , Young AdultABSTRACT
A chemical characterisation was conducted on 75 commercial extra virgin olive oils (EVOO) produced in the years 2011-2012 in Southern Italy from five different olive monovarieties (Coratina, Leccino, Maiatica, Ogliarola del Vulture and Ogliarola del Bradano). The possibility of estimating the antioxidant activity of EVOO by using a chemical index as predictor of this property was considered. In order to build up and validate an antioxidant activity predictive model, the relationship between the antioxidant activity and the chosen chemical parameters was systematically investigated. The results indicated that oil antioxidant activity, measured as IC50, could be satisfactorily predicted, for olive oils from the considered region, by using a simple index, such as the K225 value of oil samples, which represents a spectrophotometric index of the compounds responsible for oil bitterness measured at 225 nm.
Subject(s)
Antioxidants/chemistry , Plant Oils/chemistry , Antioxidants/pharmacology , Mediterranean Islands , Olive Oil , Oxidation-Reduction , Plant Oils/pharmacologyABSTRACT
An experimental investigation was performed on blend extra virgin olive oils (EVOOs) from different cultivars and EVOO from different olive monovarieties (Coratina, Leccino, Maiatica, Ogliarola) with the aim to evaluate the possibility of estimating the perceived bitterness intensity by using chemical indices, such as the total phenol content and the compounds responsible for oil bitterness measured spectrophotometrically at 225 nm (K225 value), as bitterness predictors in different EVOO. Therefore, a bitterness predictive model, based on the relationship between the perceived bitterness intensity of the selected stimuli and the chosen chemicals parameters has been built and validated. The results indicated that the oil bitterness intensity could be satisfactorily predicted by using the K225 values of oil samples.