Photo-driven water oxidation performed by supramolecular photocatalysts made of Ru(II) photosensitizers and catalysts.

Two new supramolecular photocatalysts made of covalently linked Ru(II) polypyridine chromophore subunits ([Ru(bpy)3]2+-type species; bpy = 2,2'-bipyridine) and [RuL(pic)2] (L = 2,2'-bipyridine-6,6'-dicarboxylic acid; pic = 4-picoline) water oxidation catalyst subunits have been prepared. The new species, 1 and 2, contain chromophore and catalyst subunits in the molecular ratios 1:1 and 1:2, respectively. The model chromophore species [Ru(bpy)2(L1)]2+ (RuP1; L1=4-[2-(4-pyridyl)-2-hydroxyethyl]-4-methyl-2,2'-bipyridine) and [Ru(bpy)2(L2)]2+ (RuP2; L2 = 4,4'-bis[2-(4-pyridyl)-2-hydroxyethyl]-2,2'-bipyridine) have also been prepared. The absorption spectra, oxidation behavior, and luminescent properties of 1 and 2 have been studied, and the results indicate that each subunit largely maintains its own properties in the supramolecular species. However, the luminescence of the chromophore subunits is significantly quenched in 1 and 2 in comparison with the luminescence of the respective model species. Both 1 and 2 exhibit catalytic water oxidation in the presence of cerium ammonium nitrate, exhibiting an I2M mechanism, with a better efficiency than the known catalyst [RuL(pic)2] under the same experimental conditions. Upon light irradiation, in the presence of persulfate as a sacrificial acceptor agent, 1 and 2 are more efficient photocatalysts than a system made of separated [Ru(bpy)3]2+ and [RuL(pic)2] species, highlighting the advantage of using multicomponent, supramolecular species with respect to isolated species. The O-O bond formation step is I2M, even in the photo-driven process. The photocatalytic process of 2 is more efficient than that of 1, with the turnover frequency reaching a value of 1.2 s-1. A possible reason could be an increased local concentration of catalytic subunits in the needed bimolecular assembly required for the I2M mechanism in 2 with respect to 1, a consequence of the presence of two catalytic subunits in each multicomponent species 2.

Photophysical Properties of Homo- and Hetero-Aggregate Assemblies Made of N-Annulated Perylene Derivatives.

We report the absorption spectra and photophysical properties of homo and hetero-aggregate assemblies of a strongly emissive N-annulated perylene dye (P) and of a dyad made of P and a methyl viologen derivative (P-MV), in ethanol-water solutions. In homo-aggregate assemblies of P, the π-π* fluorescence of the isolated chromophore is replaced by excimer emission at lower energy, with a lifetime of 900 ps, due to excimer formation from the initially prepared excitons. In homo-aggregate assemblies of P-MV, photoinduced charge separation, with formation of P+ -MV- species, occurs in 3 ps with a charge recombination of 20 ps. In hetero-aggregate P/P-MV systems, the light energy absorbed by the P components delocalizes over various P subunits, and when a P-MV unit is reached, charge separation occurs; however, excimer emission is present for P/P-MV ratio larger than 3 : 1, indicating that delocalized excitons within the hetero-aggregate systems extend over a limited number of P chromophores.

Design and Development of Fluorinated and Biocide-Free Sol-Gel Based Hybrid Functional Coatings for Anti-Biofouling/Foul-Release Activity.

Biofouling has destructive effects on shipping and leisure vessels, thus producing severe problems for marine and naval sectors due to corrosion with consequent elevated fuel consumption and higher maintenance costs. The development of anti-fouling or fouling release coatings creates deterrent surfaces that prevent the initial settlement of microorganisms. In this regard, new silica-based materials were prepared using two alkoxysilane cross-linkers containing epoxy and amine groups (i.e., 3-Glycidyloxypropyltrimethoxysilane and 3-aminopropyltriethoxysilane, respectively), in combination with two functional fluoro-silane (i.e., 3,3,3-trifluoropropyl-trimethoxysilane and glycidyl-2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9-hexadecafluorononylether) featuring well-known hydro repellent and anti-corrosion properties. As a matter of fact, the co-condensation of alkoxysilane featuring epoxide and amine ends, also mixed with two opportune long chain and short chain perfluorosilane precursors, allows getting stable amphiphilic, non-toxic, fouling release coatings. The sol-gel mixtures on coated glass slides were fully characterized by FT-IR spectroscopy, while the morphology was studied by scanning electron microscopy (SEM), and atomic force microscopy (AFM). The fouling release properties were evaluated through tests on treated glass slides in different microbial suspensions in seawater-based mediums and in seawater natural microcosms. The developed fluorinated coatings show suitable antimicrobial activities and low adhesive properties; no biocidal effects were observed for the microorganisms (bacteria).

Functional Nanohybrids and Nanocomposites Development for the Removal of Environmental Pollutants and Bioremediation.

World population growth, with the consequent consumption of primary resources and production of waste, is progressively and seriously increasing the impact of anthropic activities on the environment and ecosystems. Environmental pollution deriving from anthropogenic activities is nowadays a serious problem that afflicts our planet and that cannot be neglected. In this regard, one of the most challenging tasks of the 21st century is to develop new eco-friendly, sustainable and economically-sound technologies to remediate the environment from pollutants. Nanotechnologies and new performing nanomaterials, thanks to their unique features, such as high surface area (surface/volume ratio), catalytic capacity, reactivity and easy functionalization to chemically modulate their properties, represent potential for the development of sustainable, advanced and innovative products/techniques for environmental (bio)remediation. This review discusses the most recent innovations of environmental recovery strategies of polluted areas based on different nanocomposites and nanohybrids with some examples of their use in combination with bioremediation techniques. In particular, attention is focused on eco-friendly and regenerable nano-solutions and their safe-by-design properties to support the latest research and innovation on sustainable strategies in the field of environmental (bio)remediation.

Synthesis, Chemical-Physical Characterization, and Biomedical Applications of Functional Gold Nanoparticles: A Review.

Relevant properties of gold nanoparticles, such as stability and biocompatibility, together with their peculiar optical and electronic behavior, make them excellent candidates for medical and biological applications. This review describes the different approaches to the synthesis, surface modification, and characterization of gold nanoparticles (AuNPs) related to increasing their stability and available features useful for employment as drug delivery systems or in hyperthermia and photothermal therapy. The synthetic methods reported span from the well-known Turkevich synthesis, reduction with NaBH4 with or without citrate, seeding growth, ascorbic acid-based, green synthesis, and Brust-Schiffrin methods. Furthermore, the nanosized functionalization of the AuNP surface brought about the formation of self-assembled monolayers through the employment of polymer coatings as capping agents covalently bonded to the nanoparticles. The most common chemical-physical characterization techniques to determine the size, shape and surface coverage of AuNPs are described underlining the structure-activity correlation in the frame of their applications in the biomedical and biotechnology sectors.

Photoinduced Water Oxidation in Chitosan Nanostructures Containing Covalently Linked RuII Chromophores and Encapsulated Iridium Oxide Nanoparticles.

The luminophore Ru(bpy)2 (dcbpy)2+ (bpy=2,2'-bipyridine; dcbpy=4,4'-dicarboxy-2,2'-bipyridine) is covalently linked to a chitosan polymer; crosslinking by tripolyphosphate produced Ru-decorated chitosan fibers (NS-RuCh), with a 20 : 1 ratio between chitosan repeating units and RuII chromophores. The properties of the RuII compound are unperturbed by the chitosan structure, with NS-RuCh exhibiting the typical metal-to-ligand charge-transfer (MLCT) absorption and emission bands of RuII complexes. When crosslinks are made in the presence of IrO2 nanoparticles, such species are encapsulated within the nanofibers, thus generating the IrO2 ⊂NS-RuCh system, in which both RuII photosensitizers and IrO2 water oxidation catalysts are within the nanofiber structures. NS-RuCh and IrO2 ⊂NS-RuCh have been characterized by dynamic light scattering, scanning electronic microscopy, and energy-dispersive X-ray analysis, which indicated a 2 : 1 ratio between RuII chromophores and IrO2 species. Photochemical water oxidation has been investigated by using IrO2 ⊂NS-RuCh as the chromophore/catalyst assembly and persulfate anions as the sacrificial species: photochemical water oxidation yields O2 with a quantum yield (Φ) of 0.21, definitely higher than the Φ obtained with a similar solution containing separated Ru(bpy)3 2+ and IrO2 nanoparticles (0.05) or with respect to that obtained when using NS-RuCh and "free" IrO2 nanoparticles (0.10). A fast hole-scavenging process (rate constant, 7×104  s-1 ) involving the oxidized photosensitizer and the IrO2 catalyst within the IrO2 ⊂NS-RuCh system is behind the improved photochemical quantum yield of IrO2 ⊂NS-RuCh.

Nanostructured Surface Finishing and Coatings: Functional Properties and Applications.

This review presents current literature on different nanocomposite coatings and surface finishing for textiles, and in particular this study has focused on smart materials, drug-delivery systems, industrial, antifouling and nano/ultrafiltration membrane coatings. Each of these nanostructured coatings shows interesting properties for different fields of application. In this review, particular attention is paid to the synthesis and the consequent physico-chemical characteristics of each coating and, therefore, to the different parameters that influence the substrate deposition process. Several techniques used in the characterization of these surface finishing coatings were also described. In this review the sol-gel method for preparing stimuli-responsive coatings as smart sensor materials is described; polymers and nanoparticles sensitive to pH, temperature, phase, light and biomolecules are also treated; nanomaterials based on phosphorus, borates, hydroxy carbonates and silicones are used and described as flame-retardant coatings; organic/inorganic hybrid sol-gel coatings for industrial applications are illustrated; carbon nanotubes, metallic oxides and polymers are employed for nano/ultrafiltration membranes and antifouling coatings. Research institutes and industries have collaborated in the advancement of nanotechnology by optimizing conversion processes of conventional materials into coatings with new functionalities for intelligent applications.

Photoinduced Charge Separation in a Donor-Spacer-Acceptor Dyad with N-Annulated Perylene Donor and Methylviologen Acceptor.

The first donor-acceptor species in which a strongly emissive N-annulated perylene dye is connected to a methylviologen electron acceptor unit via its macrocyclic nitrogen atom, is prepared by a stepwise, modular procedure. The absorption spectra, redox behavior, spectroelectrochemistry and photophysical properties of this dyad and of its model species are investigated, also by pump-probe fs transient absorption spectroscopy. Photoinduced oxidative electron transfer from the excited state of the dyad, centered on the N-annulated perylene subunit, to the appended methyviologen electron acceptor takes place in a few ps. The charge-separated species recombines in 19 ps. Our results indicate that N-annulated perylene can be connected to functional units by taking advantage of the macrocyclic nitrogen, an option never used until now, without losing their properties, so opening the way to new designing approaches.

Absorption spectra, photophysical properties, and redox behavior of ruthenium(II) polypyridine complexes containing accessory dipyrromethene-BF2 chromophores.

The six multichromophoric species 1-6, containing the potentially luminescent Ru(II) polypyridine subunits and 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene fluorophores (dipyrromethene-BF(2) dyes, herein after called bodipy), have been prepared and their absorption spectra, luminescence properties (both at room temperature in fluid solution and at 77 K in rigid matrix), and redox properties have been investigated (for the structuralformulas of all the compounds, see Figure 1). For comparison purposes, also the same properties of the bodipy-based free ligands have been examined. Three of the multichromophoric species (1-3) are based on the Ru(bpy)(3)-type metal subunit, whereas 4-6 are based on the Ru(terpy)(2)-type metal subunit. Transient absorption spectroscopy at room temperature of all the compounds has also been performed. The absorption spectra of all the metal complexes show features that can be assigned to the Ru(II) polypyridine subunits and to the bodipy centers. In particular, the lowest energy spin-allowed pi-pi* transition of the bodipy groups dominates the visible region, peaking at about 530 nm. All the new complexes exhibit a rich redox behavior, with reversible processes attributed to specific sites, indicating a small perturbation of each redox center and therefore highlighting the supramolecular nature of the multichromophoric assemblies. Despite the good luminescence properties of the separated components, 1-6 do not exhibit any luminescence at room temperature; however, transient absorption spectroscopy evidences that for all of them a long-lived (microsecond time scale) excited state is formed, which is identified as the bodipy-based triplet state. Pump-probe transient absorption spectroscopy suggests that such a triplet state is formed from the promptly prepared bodipy-based (1)pi-pi* state in most cases by the intervention of a charge-separated level. At 77 K, all the complexes except complex 1 exhibit the bodipy-based fluorescence, although with a slightly shortened lifetime compared to the corresponding free ligand(s), and 4-6 also exhibit a phosphorescence assigned to the bodipy subunits. Phosphorescence of bodipy species had never been reported in the literature to the best of our knowledge: in the present cases we propose that it is an effective decay process thanks to the presence of the ruthenium heavy atom and of the closely lying (3)MLCT state of the Ru(terpy)(2)-type subunits.

The elusive phosphorescence of pyrromethene-BF2 dyes revealed in new multicomponent species containing Ru(II)-terpyridine subunits.

The triplet emitting state of an indacene at 774 nm (of 50 ms life-time) was observed for the first time in new ruthenium(II) complexes based on bipartite ligands carrying one or two indacene subunits linked via phenylethynyl connectors to terpyridine fragments.

A new heptanuclear dendritic ruthenium(II) complex featuring photoinduced energy transfer across high-energy subunits.

The new heptanuclear ruthenium(II) dendron, [Cl(2)Ru{(micro-2,3dpp)Ru[(micro-2,3-dpp)Ru(bpy)2]2}2](PF6)12 (1; 2,3-dpp=2,3-bis(2'-pyridyl)pyrazine; bpy = 2,2'-bipyridine), was prepared by means of the "complexes as ligands/complexes as metals" synthetic strategy, and its absorption spectrum, redox behavior, and luminescence properties were investigated. Compound 1 is a multicomponent species, which contains three different types of chromophores (namely, the {Cl(2)Ru(micro-2,3-dpp)2} core, the {Ru(micro-2,3dpp)3}2+ intermediate, and the {(bpy)2Ru(micro-2,3-dpp)}2+ peripheral subunits) and several redox-active sites. The new species exhibits very intense absorption bands in the UV region (epsilon value in the 10(5)-10(6) M(-1) cm(-1) range) as a result of spin-allowed ligand-centered (LC) transitions, and intense bands in the visible region (epsilon value in the 10(4)-10(5) M(-1) cm(-1) range) as a result of the various spin-allowed metal-to-ligand charge-transfer (MLCT) transitions. The redox investigation (accomplished by cyclic and differential pulse voltammetry) indicates that 1 undergoes a series of reversible metal-centered oxidation and ligand-centered reduction processes within the potential window investigated (+1.90 / -1.40 V vs. the standard calomel electrode, SCE). The assignment of each absorption bond and redox process to specific subunits of 1 was achieved by comparison with the properties of smaller multinuclear species of the same family, namely [Cl(2)Ru{(micro-2,3-dpp)Ru(bpy)2}2]4+ (2), [(bpy)2Ru(u-2,3-dpp)Ru(bpy)2]4+ (4), and [Ru{(micro-2,3-dpp)Ru(bpy)2}3]4+ (5). The title compound exhibits luminescence both at room temperature in acetonitrile fluid solution and at 77 K in butyronitrile rigid matrix. The emission is attributed to the triplet MLCT (3MLCT) state involving the core {Cl(2)Ru(micro-2,3-dpp)2} subunit. Interestingly, the 3MLCT levels involving the peripheral {(bpy)2Ru(micro-2,3-dpp)}2+ subunits are deactivated by energy transfer to the emitting level, in spite of the presence of interposed high-energy (Ru(micro-2,3-dpp)3}2+ components, which, in other dendrimers, acted as "isolating" subunits toward energy-transfer processes. Ultrafast experiments on 1 and on the parent species 2 and 5 allowed us to rationalize this behavior and highlight that a sequential two-step electron-transfer process can be held responsible for the efficient overall energy transfer, which offers a way to overcome a limitation in antenna metal dendrimers.