Maillard Chemistry in Clouds and Aqueous Aerosol As a Source of Atmospheric Humic-Like Substances.

The reported optical, physical, and chemical properties of aqueous Maillard reaction mixtures of small aldehydes (glyoxal, methylglyoxal, and glycolaldehyde) with ammonium sulfate and amines are compared with those of aqueous extracts of ambient aerosol (water-soluble organic carbon, WSOC) and the humic-like substances (HULIS) fraction of WSOC. Using a combination of new and previously published measurements, we examine fluorescence, X-ray absorbance, UV/vis, and IR spectra, complex refractive indices, (1)H and (13)C NMR spectra, thermograms, aerosol and electrospray ionization mass spectra, surface activity, and hygroscopicity. Atmospheric WSOC and HULIS encompass a range of properties, but in almost every case aqueous aldehyde-amine reaction mixtures are squarely within this range. Notable exceptions are the higher UV/visible absorbance wavelength dependence (Angström coefficients) observed for methylglyoxal reaction mixtures, the lack of surface activity of glyoxal reaction mixtures, and the higher N/C ratios of aldehyde-amine reaction products relative to atmospheric WSOC and HULIS extracts. The overall optical, physical, and chemical similarities are consistent with, but not demonstrative of, Maillard chemistry being a significant secondary source of atmospheric HULIS. However, the higher N/C ratios of aldehyde-amine reaction products limits the source strength to ≤50% of atmospheric HULIS, assuming that other sources of HULIS incorporate only negligible quantities of nitrogen.

Free energy map for the co-oligomerization of formaldehyde and ammonia.

Density functional theory calculations, including Poisson-Boltzmann implicit solvent and free energy corrections, are applied to construct a free energy map of formaldehyde and ammonia co-oligomerization in aqueous solution at pH 7. The stepwise route to forming hexamethylenetetramine (HMTA), the one clearly identified major product in a complex mixture, involves a series of addition reactions of formaldehyde and ammonia coupled with dehydration and cyclization reactions at key steps in the pathway. The free energy map also allows us to propose the possible identity of some major peaks observed by mass spectroscopy in the reaction mixture being the result of stable species not along the pathway to HMTA, in particular those formed by intramolecular condensation of hydroxyl groups to form six-membered rings with ether linkages. Our study complements a baseline free energy map previously worked out for the self-oligomerization of formaldehyde in solution at pH 7 using the same computational protocol and published in this journal (J. Phys. Chem. A 2013, 117, 12658).

Secondary organic aerosol formation during evaporation of droplets containing atmospheric aldehydes, amines, and ammonium sulfate.

Reactions of carbonyl compounds in cloudwater produce organic aerosol mass through in-cloud oxidation and during postcloud evaporation. In this work, postcloud evaporation was simulated in laboratory experiments on evaporating droplets that contain mixtures of common atmospheric aldehydes with ammonium sulfate (AS), methylamine, or glycine. Aerosol diameters were measured during monodisperse droplet drying experiments and during polydisperse droplet equilibration experiments at 75% relative humidity, and condensed-phase mass was measured in bulk thermogravimetric experiments. The evaporation of water from a droplet was found to trigger aldehyde reactions that increased residual particle volumes by a similar extent in room-temperature experiments, regardless of whether AS, methylamine, or glycine was present. The production of organic aerosol volume was highest from droplets containing glyoxal, followed by similar production from methylglyoxal or hydroxyacetone. Significant organic aerosol production was observed for glycolaldehyde, acetaldehyde, and formaldehyde only at elevated temperatures in thermogravimetric experiments. In many experiments, the amount of aerosol produced was greater than the sum of all solutes plus nonvolatile solvent impurities, indicating the additional presence of trapped water, likely caused by increasing aerosol-phase viscosity due to oligomer formation.

Formation of semisolid, oligomerized aqueous SOA: lab simulations of cloud processing.

Glyoxal, methylglyoxal, glycolaldehyde, and hydroxyacetone form N-containing and oligomeric compounds during simulated cloud processing with small amines. Using a novel hygroscopicity tandem differential mobility analysis (HTDMA) system that allows varied humidification times, the hygroscopic growth (HG) of each of the resulting products of simulated cloud processing was measured. Continuous water uptake (gradual deliquescence) was observed beginning at ∼ 40% RH for all aldehyde-methylamine products. Particles containing ionic reaction products of either glyoxal or glycine were most hygroscopic, with HG between 1.16 and 1.20 at 80% RH. Longer humidification times (up to 20 min) produced an increase in growth factors for glyoxal-methylamine (19% by vol) and methylglyoxal-methylamine (8% by vol) aerosol, indicating that unusually long equilibration times can be required for HTDMA measurements of such particles. Glyoxal- and methylglyoxal-methylamine aerosol particles shattered in Raman microscopy impact-flow experiments, revealing that the particles were semisolid. Similar experiments on glycolaldehyde- and hydroxyacetone-methylamine aerosol found that the aerosol particles were liquid when dried for <1 h, but semisolid when dried for 20 h under ambient conditions. The RH required for flow (liquification) during humidification experiments followed the order methylglyoxal > glyoxal > glycolaldehyde = hydroxyacetone, likely caused by the speed of oligomer formation in each system.

Brown carbon formation by aqueous-phase carbonyl compound reactions with amines and ammonium sulfate.

Reactions between small water-soluble carbonyl compounds, ammonium sulfate (AS), and/or amines were evaluated for their ability to form light-absorbing species in aqueous aerosol. Aerosol chemistry was simulated with bulk phase reactions at pH 4, 275 K, initial concentrations of 0.05 to 0.25 M, and UV-vis and fluorescence spectroscopy monitoring. Glycolaldehyde-glycine mixtures produced the most intense absorbance. In carbonyl compound reactions with AS, methylamine, or AS/glycine mixtures, product absorbance followed the order methylglyoxal > glyoxal > glycolaldehyde > hydroxyacetone. Absorbance extended into the visible, with a wavelength dependence fit by absorption Ångstrom coefficients (Å(abs)) of 2 to 11, overlapping the Å(abs) range of atmospheric, water-soluble brown carbon. Many reaction products absorbing between 300 and 400 nm were strongly fluorescent. On a per mole basis, amines are much more effective than AS at producing brown carbon. In addition, methylglyoxal and glyoxal produced more light-absorbing products in reactions with a 5:1 AS-glycine mixture than with AS or glycine alone, illustrating the importance of both organic and inorganic nitrogen in brown carbon formation. Through comparison to biomass burning aerosol, we place an upper limit on the contribution of these aqueous carbonyl-AS-amine reactions of ≤ 10% of global light absorption by brown carbon.

Glycolaldehyde monomer and oligomer equilibria in aqueous solution: comparing computational chemistry and NMR data.

A computational protocol utilizing density functional theory calculations, including Poisson-Boltzmann implicit solvent and free energy corrections, is applied to study the thermodynamic and kinetic energy landscape of glycolaldehyde in solution. Comparison is made to NMR measurements of dissolved glycolaldehyde, where the initial dimeric ring structure interconverts among several species before reaching equilibrium where the hydrated monomer is dominant. There is good agreement between computation and experiment for the concentrations of all species in solution at equilibrium, that is, the calculated relative free energies represent the system well. There is also relatively good agreement between the calculated activation barriers and the estimated rate constants for the hydration reaction. The computational approach also predicted that two of the trimers would have a small but appreciable equilibrium concentration (>0.005 M), and this was confirmed by NMR measurements. Our results suggest that while our computational protocol is reasonable and may be applied to quickly map the energy landscape of more complex reactions, knowledge of the caveats and potential errors in this approach need to be taken into account.

Glyoxal in aqueous ammonium sulfate solutions: products, kinetics and hydration effects.

Reactions and interactions between glyoxal and salts in aqueous solution were studied. Glyoxal was found to react with ammonium to form imidazole, imidazole-2-carboxaldehyde, formic acid, N-glyoxal substituted imidazole, and minor products at very low concentrations. Overall reaction orders and rates for each major product were measured. Sulfate ions have a strong and specific interaction with glyoxal in aqueous solution, which shifts the hydration equilibria of glyoxal from the unhydrated carbonyl form to the hydrated form. This ion-specific effect contributes to the observed enhancement of the effective Henry's law coefficient for glyoxal in sulfate-containing solutions. The results of UV-vis absorption and NMR spectroscopy studies of solutions of glyoxal with ammonium, methylamine, and dimethylamine salts reveal that light absorbing compounds require the formation of nitrogen containing molecules. These findings have implications on the role of glyoxal in the atmosphere, both in models of the contribution of glyoxal to form secondary organic aerosol (SOA), the role of nitrogen containing species for aerosol optical properties and in predictions of the behavior of other carbonyls or dicarbonyls in the atmosphere.

Hydroxycarboxylic acid-derived organosulfates: synthesis, stability, and quantification in ambient aerosol.

Organosulfates have been proposed as contributors to aerosol growth and have been detected in both chamber and atmospheric aerosol samples. We present a simple method for the synthesis of quantitative analytical standards of two small hydroxycarboxylic acid-derived organosulfates, glycolic and lactic acid sulfate. Additionally, we discuss the stability of hydroxycarboxylic acid-derived organosulfates and their previously proposed sulfate hemiacetal isomers in commonly used solvents for filter extraction. The hydroxycarboxylic acid-derived organosulfates were found to be stable under acidic conditions comparable to those found in ambient aerosol. By using synthesized standards, quantitative organosulfate concentrations were measured from ambient particulate matter (PM(2.5)) collected in urban locations in the United States, Mexico City, and Pakistan. Lactic acid sulfate and glycolic acid sulfate concentrations ranged 0.4-3.8 ng/m(3) and 1.9-11.3 ng/m(3), respectively. We propose that glycolic acid sulfate represents an important tracer for atmospheric processes that form organosulfates in ambient particulate matter.

Characterization of vapor wall loss in laboratory chambers.

Laboratory chambers used to study atmospheric chemistry and aerosol formation are subject to wall loss of vapors and particles that must be accounted for in calculating aerosol yields. While particle wall loss in chambers is relatively well-understood and routinely accounted for, that of vapor is less so. Here we address experimental measurement and modeling of vapor losses in environmental chambers. We identify two compounds that exhibit wall loss: 2,3-epoxy-1,4-butanediol (BEPOX), an analog of an important isoprene oxidation product; and glyoxal, a common volatile organic compound oxidation product. Dilution experiments show that BEPOX wall loss is irreversible on short time scales but is reversible on long time scales, and glyoxal wall loss is reversible for all time scales. BEPOX exhibits minimal uptake onto clean chamber walls under dry conditions, with increasing rates of uptake over the life of an in-use chamber. By performing periodic BEPOX wall loss experiments, it is possible to assess quantitatively the aging of chamber walls.

Photooxidation of 2-methyl-3-Buten-2-ol (MBO) as a potential source of secondary organic aerosol.

2-Methyl-3-buten-2-ol (MBO) is an important biogenic hydrocarbon emitted in large quantities by pine forests. Atmospheric photooxidation of MBO is known to lead to oxygenated compounds, such as glycolaldehyde, which is the precursor to glyoxal. Recent studies have shown that the reactive uptake of glyoxal onto aqueous particles can lead to formation of secondary organic aerosol (SOA). In this work, MBO photooxidation under high- and low-NO(x) conditions was performed in dual laboratory chambers to quantify the yield of glyoxal and investigate the potential for SOA formation. The yields of glycolaldehyde and 2-hydroxy-2-methylpropanal (HMPR), fragmentation products of MBO photooxidation, were observed to be lower at lower NO(x) concentrations. Overall, the glyoxal yield from MBO photooxidation was 25% under high-NO(x) and 4% under low-NO(x) conditions. In the presence of wet ammonium sulfate seed and under high-NO(x) conditions, glyoxal uptake and SOA formation were not observed conclusively, due to relatively low (< 30 ppb) glyoxal concentrations. Slight aerosol formation was observed under low-NO(x) and dry conditions, with aerosol mass yields on the order of 0.1%. The small amount of SOA was not related to glyoxal uptake, but is likely a result of reactions similar to those that generate isoprene SOA under low-NO(x) conditions. The difference in aerosol yields between MBO and isoprene photooxidation under low-NO(x) conditions is consistent with the difference in vapor pressures between triols (from MBO) and tetrols (from isoprene). Despite its structural similarity to isoprene, photooxidation of MBO is not expected to make a significant contribution to SOA formation.

A laser induced fluorescence-based instrument for in-situ measurements of atmospheric formaldehyde.

Direct, in situ detection of gas phase formaldehyde (HCHO) via laser induced fluorescence in a White-type multipass cell is demonstrated with a (3sigma) limit of detection of approximately 0.051 parts per billion by volume in a 1 s sampling time. Calibration is performed in two ways: using permeation tubes and with air bubbled through an aqueous solution of HCHO. The concentration of HCHO output from the bubbler is measured by cavity ring-down spectroscopy. Measurement of ambient HCHO is carried out at the University of Wisconsin, Madison for a period of several days.

Laser-induced phosphorescence for the in situ detection of glyoxal at part per trillion mixing ratios.

Glyoxal is a molecule of emerging importance to the atmospheric chemistry community because of its role in aerosol formation and utility as an indicator for oxidative chemistry. We describe the Madison laser-induced phosphorescence (LIP) instrument, an instrument based on LIP for direct, in situ measurement of gas-phase glyoxal with a S/N = 3 limit of detection (LOD) of 18 ppt(v)/min, with planned upgrades to reduce the LOD to 5 ppt(v)/min. By employing this technique, we have built an instrument with exceptional in situ limits of detection, tremendous selectivity, and the considerable advantage of direct, fast measurements that requires neither derivatization nor ex situ analysis. The instrument is equally well-suited for laboratory and field measurements. It was deployed for the first time to the BEARPEX 2007 field campaign in Georgetown, CA, producing nearly one month of continuous data with mixing ratios ranging from 20 to 250 ppt(v) glyoxal. To the authors' knowledge, this represents the first use of LIP for a field measurement.