Ball-To-Hand Contact Forces Increase Modeled Shoulder Torques during a Volleyball Spike.

The volleyball spike is repeated many times in practices and games, presenting a high risk of overuse injury. Previous biomechanical analyses estimating forces on the shoulder during spiking have not included the force exerted on the arm by the ball, because no practical method exists to estimate the contact force between the ball and the hand. The objective of the study was to model the internal shoulder joint reactions while including the measured ball contact force. Ten adolescent female volleyball players performed spikes while we recorded 3D motion capture data for both ball and player. Using an impulse-momentum analysis, we estimated the ball contact force, then included the force in a computational simulation model to estimate the torques produced by the shoulder. The study found that post-contact ball velocities range from 8.6 m/s - 18.2 m/s with net forces between 238 N - 672 N. Most notably, when the ball contact force was included, the average modeled internal shoulder torque to internally rotate the arm increased from -26 N-m to +44 N-m (p < 0.001). These data suggest that neglecting the contact force may risk misinterpreting connections between biomechanics and injury due to spiking. More accurate joint mechanics models will lead to better injury prevention recommendations for volleyball players of all ages.

Role of lung lobar sliding on parenchymal distortion during breathing.

Sliding between lung lobes along lobar fissures is a poorly understood aspect of lung mechanics. The objective of this study was to test the hypothesis that lobar sliding helps reduce distortion in the lung parenchyma during breathing. Finite element models of left lungs with geometries and boundary conditions derived from medical images of human subjects were developed. Effect of lobar sliding was studied by comparing nonlinear finite elastic contact mechanics simulations that allowed and disallowed lobar sliding. Lung parenchymal distortion during simulated breath-holds and tidal breathing was quantified with the model's spatial mean anisotropic deformation index (ADI), a measure of directional preference in volume change that varies spatially in the lung. Models that allowed lobar sliding had significantly lower mean ADI (i.e., lesser parenchymal distortion) than models that disallowed lobar sliding under simulations of both tidal breathing (5.3% median difference, P = 0.008, n = 8) and lung deformation between breath-holds at total lung capacity and functional residual capacity (3.2% median difference, P = 0.03, n = 6). This effect was most pronounced in the lower lobe where lobar sliding reduced parenchymal distortion with statistical significance, but not in the upper lobe. In addition, more lobar sliding was correlated with greater reduction in distortion between sliding and nonsliding models in our study cohorts (Pearson's correlation coefficient of 0.95 for tidal breathing, 0.87 for breath-holds, and 0.91 for the combined dataset). These findings are consistent with the hypothesis that lung lobar sliding reduces parenchymal distortion during breathing.NEW & NOTEWORTHY The role of lobar sliding in lung mechanics is poorly understood. Delineating this role could help explain how breathing is affected by anatomical differences between subjects such as incomplete and missing lobar fissures. We used computational contact mechanics models of lungs from human subjects to delineate the effect of lobar sliding by comparing simulations that allowed and disallowed sliding. We found evidence consistent with the hypothesis that lung lobar sliding reduces parenchymal distortion during breathing.

Analysis of Cerebral Aneurysm Wall Tension and Enhancement Using Finite Element Analysis and High-Resolution Vessel Wall Imaging.

Biomechanical computational simulation of intracranial aneurysms has become a promising method for predicting features of instability leading to aneurysm growth and rupture. Hemodynamic analysis of aneurysm behavior has helped investigate the complex relationship between features of aneurysm shape, morphology, flow patterns, and the proliferation or degradation of the aneurysm wall. Finite element analysis paired with high-resolution vessel wall imaging can provide more insight into how exactly aneurysm morphology relates to wall behavior, and whether wall enhancement can describe this phenomenon. In a retrospective analysis of 23 unruptured aneurysms, finite element analysis was conducted using an isotropic, homogenous third order polynomial material model. Aneurysm wall enhancement was quantified on 2D multiplanar views, with 14 aneurysms classified as enhancing (CRstalk≥0.6) and nine classified as non-enhancing. Enhancing aneurysms had a significantly higher 95th percentile wall tension (µ = 0.77 N/cm) compared to non-enhancing aneurysms (µ = 0.42 N/cm, p < 0.001). Wall enhancement remained a significant predictor of wall tension while accounting for the effects of aneurysm size (p = 0.046). In a qualitative comparison, low wall tension areas concentrated around aneurysm blebs. Aneurysms with irregular morphologies may show increased areas of low wall tension. The biological implications of finite element analysis in intracranial aneurysms are still unclear but may provide further insights into the complex process of bleb formation and aneurysm rupture.

Insights into the pathogenesis of cerebral fusiform aneurysms: high-resolution MRI and computational analysis.

BACKGROUND: Intracranial fusiform aneurysms are complex and poorly characterized vascular lesions. High-resolution magnetic resonance imaging (HR-MRI) and computational morphological analysis may be used to characterize cerebral fusiform aneurysms. OBJECTIVE: To use advanced imaging and computational analysis to understand the unique pathophysiology, and determine possible underlying mechanisms of instability of cerebral fusiform aneurysms. METHODS: Patients with unruptured intracranial aneurysms prospectively underwent imaging with 3T HR-MRI at diagnosis. Aneurysmal wall enhancement was objectively quantified using signal intensity after normalization of the contrast ratio (CR) with the pituitary stalk. Enhancement between saccular and fusiform aneurysms was compared, as well as enhancement characteristics of fusiform aneurysms. The presence of microhemorrhages in fusiform aneurysms was determined with quantitative susceptibility mapping (QSM). Three distinct types of fusiform aneurysms were analyzed with computational fluid dynamics (CFD) and finite element analysis (FEA). RESULTS: A total of 130 patients with 160 aneurysms underwent HR-MRI. 136 aneurysms were saccular and 24 were fusiform. Fusiform aneurysms had a significantly higher CR and diameter than saccular aneurysms. Enhancing fusiform aneurysms exhibited more enhancement of reference vessels than non-enhancing fusiform aneurysms. Ten fusiform aneurysms underwent QSM analysis, and five aneurysms showed microhemorrhages. Microhemorrhage-positive aneurysms had a larger volume, diameter, and greater enhancement than aneurysms without microhemorrhage. Three types of fusiform aneurysms exhibited different CFD and FEA patterns. CONCLUSION: Fusiform aneurysms exhibited more contrast enhancement than saccular aneurysms. Enhancing fusiform aneurysms had larger volume and diameter, more enhancement of reference vessels, and more often exhibited microhemorrhage than non-enhancing aneurysms. CFD and FEA suggest that various pathophysiological processes determine the formation and growth of fusiform aneurysms.