Two-dimensional separation by sequential injection chromatography.

Sequential injection chromatography (SIC) is an alternative for fast chromatographic separations with low consumption of organic solvents. However, its separation capacity is restricted by the use of short chromatographic columns and the limitations for gradient elution. The present work aimed to expand the analytical capacity of SIC by exploiting a multidimensional approach with two chromatographic columns, different in their separation mechanisms, which increased the selectivity and peak resolution. The viability of the proposal was demonstrated by separation of aromatic biogenic amines (histamine, tyramine, phenylethylamine, and tryptamine), whose unidimensional separation was not achieved either by using cyanopropyl or C18 chromatographic columns. In the two-dimensional approach, the fraction of the eluate unresolved in the first dimension (containing tyramine and phenylethylamine) was collected in a sampling loop and, subsequently, inserted in the second chromatographic dimension (heart-cutting mode). Under the optimized conditions, the first chromatographic dimension was based on a cyanopropyl monolithic column and an aqueous mobile phase composed of phosphoric acid solution, pH 2.5, while the second dimension employed a C18 superficially porous particle column and a mobile phase composed of acetonitrile and phosphoric acid aqueous solution, pH 2.5 (7:93, v/v). The total analysis time was 8 min, and a resolution of 1.72 was achieved between the nearest peaks (tyramine and phenylethylamine). Linear responses were obtained within 10 and 50 mg L-1 (r > 0.997), with detection limits estimated at 2.7, 7.7, 1.9, and 0.3 mg L-1, for histamine, tyramine, phenylethylamine, and tryptamine, respectively, and a coefficient of variation of 3.0% (n = 12).

An overview of the Brazilian contributions to Green Analytical Chemistry.

Green Analytical Chemistry (GAC) is a research field that seeks for more sustainable analytical approaches to minimize the toxicity and amounts of wastes without hindering the analytical performance. This is a trend in Analytical Chemistry worldwide and because of the diversity of innovations on this subject, Brazil stands out as the third in the list of the main contributors to GAC, with ca. 11.2% of the published articles. Significant innovations and interesting applications in several fields have been presented and Brazil is continuously moving from Chemistry to Green Chemistry also in the Analytical Chemistry field. Selected contributions for sample preparation, spectro- and electroanalysis, separation techniques, chemometrics, and also procedures for point-of-care measurements are critically reviewed.

Controlled crosslinking of trimethylolpropane trimethacrylate for preparation of organic monolithic columns for capillary liquid chromatography.

Organic monolithic columns based on single crosslinking of trimethylolpropane trimethacrylate (TRIM) monomer were prepared in a single step by living/controlled free-radical polymerization. Full optimization of the preparation, such as using different percentages of TRIM and different amounts of radical promoter as well as various porogen solvents were explored. The resulting monolithic columns were characterized by scanning electronic microscopy and nitrogen sorption for structure morphology studies and surface area measurements, respectively. Using capillary liquid chromatography, 150 µm i.d. columns were applied to separate a mixture of small hydrophobic molecules. The results indicated that column performance is highly sensitive to the type and the amount of porogen solvents used in the polymerization mixture composition. Good resolution factors and methylene selectivity were obtained, indicating the promising potential of this material for capillary liquid chromatography separations.

Improvement in Liquid Chromatographic Performance of Organic Polymer Monolithic Capillary Columns with Controlled Free-Radical Polymerization.

Capillary columns containing butyl or lauryl methacrylate monoliths were prepared using two different free-radical polymerization methods: conventional free-radical polymerization and controlled/living free-radical polymerization, both initiated thermally, and these methods were compared for the first time. Both monolith morphology and chromatographic efficiency were compared for the synthesized stationary phases using scanning electronic microscopy (SEM) and capillary liquid chromatography, respectively. Columns prepared using controlled method gave better chromatographic performance for both monomers tested. The lauryl-based monolith showed 7-fold improvement in chromatographic efficiency with a plate count of 42,000 plates/m (corrected for dead volume) for a non-retained compound. Columns fabricated using controlled polymerization appeared more homogenous radially with fused small globular morphologies, evaluated by SEM, and lower column permeability. The columns were compared with respect to resolving power of a series of alkylbenzenes under isocratic and gradient elution conditions.