A new classification to characterize and predict treatment of acetabular bone defects.

BACKGROUND: The increasing amount of revision surgeries in total hip arthroplasty (THA) represents a burden for orthopedic surgeons given the complexity and unpredictability of this kind of surgery. The aim of the current study was to develop a new radiographic classification of acetabular bone defects stratify the severity of the lesion and to suggest the surgical strategy to address it. METHODS: Radiographs of 151 consecutive patients who underwent acetabular revision surgery in our institution were collected to develop a new classification that groups the acetabular bone defects in three zones (A, B and C). The performance to predict treatment and inter- and intra-rater agreement were evaluated. RESULTS: The ability of the newly proposed classification to predict treatment was 87.3% (k weighted: 0.65). The inter-rater reliability was 90.1% (k: 0.81), and the intra-rater reliability between the two sets of evaluations performed by the observer at 1-month distance was 97.5% (k: 0.94). CONCLUSIONS: The newly proposed classification was able to characterize the extent of acetabular bone defects and predict pre-operatively the appropriate surgical treatment strategy in 87.3% of cases. It showed a strong agreement among raters and an almost perfect agreement among different measurements at 1 month distance. This new tool could be used in the preoperative assessment to drive the use of secondary level image examinations and the type of surgical management.

The Trochlear Bisector as a New Landmark for Kinematic Alignment in Total Knee Arthroplasty: A Radiographic Study.

Background: In recent years, there has been considerable interest in prosthetic alignment techniques for total knee arthroplasty (TKA), particularly in the so-called kinematic alignment, which aims to restore the knee's native alignment. However, implementing this technique requires specialized instruments and procedural steps that can be laborious. This study introduces the bisector of the trochlear groove as a reliable landmark for performing the distal femoral cut while maintaining parallelism with the native femoral joint line. Methods: Three orthopedic specialists assessed 110 X-ray images of full-leg, weight-bearing lower limbs obtained from healthy individuals between January 2021 and December 2022. The bisector of the trochlear groove was identified on the X-ray images, and the angle between this bisector and the femoral joint line was measured. The consistency of these measurements across repeated assessments and different examiners was evaluated. Results: The bisector of the trochlear groove was found to be perpendicular to the femoral joint line, with a mean angle of 89.4°. The inter-rater reliability was 68% within ±1.3° from the mean, while the intra-rater reliability was 82% within ±1.5° from the mean. Conclusions: These results suggest that by performing a femoral cut perpendicular to the bisector of the trochlear groove, surgeons can inherently restore the femoral joint line of the native knee in patients where the native joint line is no longer identifiable due to the effect of osteoarthritis. This method may offer a viable and straightforward alternative to the standard surgical technique currently practiced for kinematic alignment in TKA.

Femoral bone defect classifications in revision total hip arthroplasty: a comprehensive review and proposal of a new algorithm of management.

The number of primary total hip arthroplasties (THAs) and revisions is expected to steadily grow in the future. The femoral revision surgery can be technically demanding whether severe bone defects need to be addressed. The femoral revision aims to obtain a proper primary stability of the stem with a more proximal fixation as possible. Several authors previously proposed classification systems to describe the morphology of the bony femoral defect and to drive accordingly the surgeon in the revision procedure. The previous classifications mainly considered cortical and medullary bone at the level of the defect of poor quality by definition. Therefore, the surgical strategies aimed to achieve a distal fixation bypassing the defect or to fill the defect with bone impaction grafting or structured bone grafts up to the replacement of the proximal femur with megaprosthesis. The consensus on a comprehensive and reliable classification system and management algorithm is still lacking. A new classification system should be developed taking into account the bone quality. The rationale of a new classification is that 'functional' residual bone stock could be present at the level of the defect. Therefore, it can be used to achieve a primary (mechanical) and secondary (biological) stability of the implants with a femoral fixation more proximal as possible.

All-Polyethylene Versus Metal-Backed Tibial Components in Total Knee Arthroplasty: A Meta-Analysis of Randomized Controlled Trials.

BACKGROUND: In the literature, there is no evidence suggesting the superiority in clinical performance between all-polyethylene (AP) and metal-backed (MB) tibial implants in total knee arthroplasty. The aim of this study was to systematically review the literature to collect only high-quality studies investigating the differences in terms of clinical and radiostereometric analysis (RSA) outcomes of AP compared to MB implants. METHODS: Only randomized controlled trials (RCTs) reporting either clinical or RSA outcomes have been included. Data sources were Embase, Medline, and the Cochrane Central Register of Controlled Trials. RESULTS: We included eleven RCTs evaluating the outcomes of 1,377 patients. Of the RCTs, 9 of them showed a low risk and 2 showed moderate risk of bias. There was no statistically significant difference in terms of clinical outcomes and survival rate between the AP and MB group; however, a statistically significant lower mean lift-off in the AP group (0.19 mm) compared to the MB group (0.3 mm) was observed on RSA. CONCLUSIONS: The performance of AP total knee arthroplasty in terms of clinical outcomes and 5-year survival was not statistically different when compared to the MB group. However, the RSA showed a statistically significant lower mean lift-off in the AP group.

AI-based hip prosthesis failure prediction through evolutional radiological indices.

INTRODUCTION: This study aimed to develop artificial intelligence models for predicting hip implant failure from radiological features. Analyzing the evolution of the periprosthetic bone and implant's position throughout the entire follow-up period has shown the potential to be more relevant in outcome prediction than simply considering the latest radiographic images. Thus, we investigated an AI-based model employing a small set of evolutional parameters derived from conventional radiological features to predict hip prosthesis failure. MATERIALS AND METHODS: One hundred sixty-nine radiological features were annotated from historical anteroposterior and lateral radiographs for 162 total hip arthroplasty patients, 32 of which later underwent implant failure. Linear regression on each patient's chronologically sorted radiological features was employed to derive 169 corresponding evolutional parameters per image. Three sets of machine learning predictors were developed: one employing the original features (standard model), one the evolutional ones (evolutional model), and the last their union (hybrid model). Each set included a model employing all the available features (full model) and a model employing the few most predictive ones according to Gini importance (minimal model). RESULTS: The evolutional and hybrid predictors resulted highly effective (area under the ROC curve (AUC) of full models = 0.94), outperforming the standard one, whose AUC was only 0.82. The minimal hybrid model, employing just four features, three of which evolutional, scored an AUC of 0.95, proving even more accurate than the full one, exploiting 173 features. This tool could be shaped to be either highly specific (sensitivity: 80%, specificity: 98.6%) or highly sensitive (sensitivity: 90%, specificity: 92.4%). CONCLUSION: The proposed predictor may represent a highly sensitive screening tool for clinicians, capable to predict THA failure with an advance between a few months and more than a year through only four radiological parameters, considering either their value at the latest visit or their evolution through time.

Clinical and radiological outcomes of an uncemented metaphyseal short stem at minimum 10 years of follow-up: a prospective observational study.

PURPOSE: There is growing interest around short stems as they provide a less invasive approach for total hip arthroplasty preserving bone stock for a possible revision surgery if required. The main purpose of this work was to assess the long-term performance of an uncemented metaphyseal short stem in terms of survival rate and in addition its clinical and radiological outcomes. MATERIALS AND METHODS: From January to December 2010, we prospectively enrolled all consecutive patients undergoing primary total hip arthroplasty with an uncemented metaphyseal short stem in our institution with a minimum follow-up of 10 years. The radiographic features investigated were the varus-valgus stem orientation, areas of osteolysis and radiolucencies, stress shielding, and heterotopic calcifications. The clinical outcomes were measured using the HHS. RESULTS: A total of 163 patients (172 hips) were finally included and the measured survival rate at 10 years was 99.6%. The average HHS increased from 55.0 preoperatively to 97.8 at the last follow-up (p < 0.0001). Among them, 137 patients (164 hips) were also available for radiographic assessment. Mild varus malalignment was observed in 40% of cases and remained stable in the serial X-rays and was not associated with step loosening. Mild stress shielding was observed around 13 stems (9%) and moderate only around 3 implants. CONCLUSION: In conclusion, the uncemented metaphyseal short stems showed excellent survival and clinical results at 10 years and at a radiographical level very low stress shielding was observed; moreover, besides the high frequency of varus alignment the implanted stems was not associated with revision surgery or with worse clinical outcomes.

Sub-optimal femoral fit in total knee arthroplasty, a systematic review of human femoral data vs off-the-shelf contemporary femoral components.

PURPOSE: The purpose of the current study is to investigate the inadequacy of fit between the human distal femur and the knee implants offerings and describe the available strategies to overcome this issue. METHODS: A systematic research of the literature was performed to identify studies reporting morphologic measures of the distal femur. Studies were excluded if they included unhealthy knees or the morphological analysis did not report the two key dimensions to identify the patient's unique anatomy: AP length and mediolateral (ML) width. Clinically relevant component overhang or underhang was considered when the metal-bone mismatch was > 3 mm as described in the literature. RESULTS: Six studies with anthropometric analysis of 1395 distal femurs met the inclusion criteria. The analysis revealed that by employing the available sizes of four current "state-of-the-art" primary off-the shelf (OTS) femoral implants up to 13-41% would show underhang and 9-27% overhang clinically relevant and the introduction of narrower sizes did not reduce this percentage of underhang but improved the overhang rate of 10-15%. CONCLUSIONS: Whenever an ML/AP mismatch in encountered in the operating room, adaptations are needed, and these bring about deleterious biomechanical and clinical complications. Therefore, this study highlights the need for implants design with multiple ML offerings per AP size, since they provide not only more sizes options but more femoral shapes to match the different ML sizes of the distal femur, compared to designs with single ML offerings for a given femoral AP dimension.

Sport Activity and Clinical Outcomes after Hip Arthroscopy with Acetabular Microfractures at a Minimum 2-Year Follow-Up: A Matched-Pair Controlled Study.

Background: Acetabular microfractures for cartilage lesions have been shown to be a safe procedure able to improve patient reported outcomes (PROs). Nevertheless, the return to sport activity rate represents a crucial outcome to be investigated in these young athletic patients. Methods: Patients undergoing acetabular microfracture for full chondral acetabular lesions were compared to a 1:1 matched-pair by age and gender control group undergoing hip arthroscopy without microfractures. Clinical assessment was performed with PROs and participation in sports in terms of type and level of activities was evaluated preoperatively and at 2-years follow-up. Results: A total of 62 patients with an average age of 35.1 ± 8.1 (microfracture group) and 36.4 ± 6.3 (control group) were included. In both groups, the average values of PROs significantly increased from preoperatively to the last follow-up. There was no significant difference between the two groups in the number of patients playing at the amateur and elite level preoperatively and at the last follow-up. Conclusions: Microfractures for the management of full-thickness acetabular chondral defect provides good clinical results at a minimum follow-up of two years, which are not inferior to a matched-pair control group. Patients undergoing this procedure are likely able to return at the same level of sport before surgery.

Automatic Identification of Failure in Hip Replacement: An Artificial Intelligence Approach.

Background: Total hip arthroplasty (THA) follow-up is conventionally conducted with serial X-ray imaging in order to ensure the early identification of implant failure. The purpose of this study is to develop an automated radiographic failure detection system. Methods: 630 patients with THA were included in the study, two thirds of which needed total or partial revision for prosthetic loosening. The analysis is based on one antero-posterior and one lateral radiographic view obtained from each patient during routine post-surgery follow-up. After pre-processing for proper standardization, images were analyzed through a convolutional neural network (the DenseNet169 network), aiming to predict prosthesis failure. The entire dataset was divided in three subsets: training, validation, and test. These contained transfer learning and fine-tuning algorithms, based on the training dataset, and were implemented to adapt the DenseNet169 network to the specific data and clinical problem. Results: After the training procedures, in the test set, the classification accuracy was 0.97, the sensitivity 0.97, the specificity 0.97, and the ROC AUC was 0.99. Only five images were incorrectly classified. Seventy-four images were classified as failed, and eighty as non-failed with a probability >0.999. Conclusion: The proposed deep learning procedure can detect the loosening of the hip prosthesis with a very high degree of precision.

Large variation in timing of follow-up visits after hip replacement: a review of the literature.

The study investigated the existing guidelines on the quality and frequency of the follow-up visits after total hip replacement surgery and assessed the level of evidence of these recommendations. The review process was carried out according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Additional works were retrieved by direct investigation of the available guidelines of the most important orthopedic societies and regulatory agencies. The current systematic review of the literature resulted in zero original papers, four guidelines for routine follow-up and three guidelines for special cases. Concerning the quality of evidence behind them, these guidelines were not evidence based but drafted from expert consensus. The most important finding of this review is the large variation of recommendations in the follow-up schedule after total hip arthroplasty and the lack of evidence-based indications. Indeed, all the above-reported guidelines are the result of a consensus among experts in the field (level of recommendation class D 'very low') and not based on clinical studies.

A single step, centrifuge-free method to harvest bone marrow highly concentrated in mesenchymal stem cells: results of a pilot trial.

PURPOSE: The aims of the present study were: (1) to characterize the bone-marrow aspirate (BMA) obtained with a centrifuge-free process, employing a dedicated aspiration device; (2) to test the in vitro efficacy of BMA in a model of cartilage inflammation; and (3) to report the preliminary clinical results in a small cohort of patients affected by knee OA. METHODS: Ten patients (4 M, 6 W; mean age: 51.9 ± 9.2 yy) affected by mild to moderate unicompartmental knee OA (KL grade 2-3) were treated by intra-articular and subchondral injections of BMA obtained by a centrifuge-free process. To evaluate the effectiveness of the device in harvesting mesenchymal stem cells (MSCs), samples of the obtained BMA were tested by flow cytometry before and after subculture; BMA ability to counteract inflammation was also tested in an in vitro model of cartilage cell inflammation, evaluating the expression of MMP1, MMP3, TGFß and TIMP-1 by real-time PCR. Patients were also evaluated up to two years' follow-up by using: VAS for pain, IKDC-subjective and KOOS scores. RESULTS: The laboratory analysis showed that BMSCs accounted for 0.011% of BMA cells, similar to what had been expected in native bone marrow. The paracrine activity of BMA was able to reduce in vitro the catabolic response of human chondrocyte, as shown by the decrease in metalloproteases concentration and increase in anti-inflammatory mediators. Moreover, the clinical evaluation showed significant improvements in all scores adopted, with stable results up to two years. CONCLUSION: The present data showed the effectiveness of the study device to harvest pure bone marrow with minimal peripheral blood contamination. The relevant content of MSCs resulted in the ability to counteract the catabolic cascade through a paracrine action. The clinical outcomes in patients affected by unicompartmental knee OA were encouraging in terms of pain reduction and functional improvement up to mid-term evaluation.

Drug Delivery Systems for the Treatment of Knee Osteoarthritis: A Systematic Review of In Vivo Studies.

Many efforts have been made in the field of nanotechnology to improve the local and sustained release of drugs, which may be helpful to overcome the present limitations in the treatment of knee OA. Nano-/microparticles and/or hydrogels can be now engineered to improve the administration and intra-articular delivery of specific drugs, targeting molecular pathways and pathogenic mechanisms involved in OA progression and remission. In order to summarize the current state of this field, a systematic review of the literature was performed and 45 relevant studies were identified involving both animal models and humans. We found that polymeric nanoparticles loaded with anti-inflammatory drugs (i.e., dexamethasone or celecoxib) are the most frequently investigated drug delivery systems, followed by microparticles and hydrogels. In particular, the nanosystem most frequently used in preclinical research consists of PLGA-nanoparticles loaded with corticosteroids and non-steroidal anti-inflammatory drugs. Overall, improvement in histological features, reduction in joint inflammation, and improvement in clinical scores in patients were observed. The last advances in the field of nanotechnology could offer new opportunities to treat patients affected by knee OA, including those with previous meniscectomy. New smart drug delivery approaches, based on nanoparticles, microparticles, and hydrogels, may enhance the therapeutic potential of intra-articular agents by increasing the permanence of selected drugs inside the joint and better targeting specific receptors and tissues.

Therapeutic Manipulation of Macrophages Using Nanotechnological Approaches for the Treatment of Osteoarthritis.

Osteoarthritis (OA) is the most common joint pathology causing severe pain and disability. Macrophages play a central role in the pathogenesis of OA. In the joint microenvironment, macrophages with an M1-like pro-inflammatory phenotype induce chronic inflammation and joint destruction, and they have been correlated with the development and progression of the disease, while the M2-like anti-inflammatory macrophages support the recovery of the disease, promoting tissue repair and the resolution of inflammation. Nowadays, the treatment of OA in the clinic relies on systemic and/or intra-articular administration of anti-inflammatory and pain relief drugs, as well as surgical interventions for the severe cases (i.e., meniscectomy). The disadvantages of the pharmacological therapy are related to the chronic nature of the disease, requiring prolonged treatments, and to the particular location of the pathology in joint tissues, which are separated anatomical compartments with difficult access for the drugs. To overcome these challenges, nanotechnological approaches have been investigated to improve the delivery of drugs toward macrophages into the diseased joint. This strategy may offer advantages by reducing off-target toxicities and improving long-term therapeutic efficacy. In this review, we describe the nanomaterial-based approaches designed so far to directly or indirectly manipulate macrophages for the treatment of osteoarthritis.